You are very talented. It's a joy to watch you engrave.
@kristibbradshaw2 ай бұрын
Wonderful tutorial. Thank you.
@FrederickSingh-ky6xc3 ай бұрын
Thanks didn't know that it was so easy 😮
@travismorgan73153 ай бұрын
what graver are you using?
@badrakhariunchimeg10316 ай бұрын
haha
@davidlowrie57910 ай бұрын
Beautiful tight work.
@texasgigi3684 Жыл бұрын
I want to see the whole process!!
@dariovelasco3407 Жыл бұрын
Q video tan pinche!!!!
@annamomoh6440 Жыл бұрын
Thanks a lot! Very clear explanation❤
@PLINKER Жыл бұрын
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
@onurrecepov9311 Жыл бұрын
halo
@onurrecepov9311 Жыл бұрын
dijamont
@bakinka2727 Жыл бұрын
Finally I found a video that shows sculpting up close. Thank you!
@ehsankhalili6761 Жыл бұрын
Nice work 😍
@Lightning-Man-1954 Жыл бұрын
Hi. I've followed you for years. Can you show the difference between the Enset and your fabulous 👌 designer Pulse Graver.
@Guds777 Жыл бұрын
Interesting stuff...
@melissafield97372 жыл бұрын
Oh Iwas so engaged ( oh man pardon the pun lmao) where’s the reveal? I need end result closure!! Loved watching you’re technique, and sharing what you did but man I want to see the finished product!
@prosenjitpalpal83042 жыл бұрын
Super
@avishkarkaso12152 жыл бұрын
Thanks for teaching me how to set
@johnsmalldridge63562 жыл бұрын
Did anyone notice the loose side stone?
@sejaaguia80203 жыл бұрын
Just perfect! Thank you for sharing!
@sejaaguia80203 жыл бұрын
Very good! Thank you for sharing!
@Bb186fo3 жыл бұрын
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
@sannasydolai81653 жыл бұрын
Rate of push machine
@sannasydolai81653 жыл бұрын
The pusher machine name please
@rogergarcia30213 жыл бұрын
Nice Fing job, good video
@yudelmartinez25053 жыл бұрын
👍👍me gusta mucho !! Que profecionalidad
@erosangelos94224 жыл бұрын
Nice work and great technique ) I enjoyed it!
@andijvie31194 жыл бұрын
Hi sir, whats you working distance with the microscope? Is 150mm enough for working space?
@shantkevorkian8894 жыл бұрын
Thank u for this helpful video :)
@andijvie31194 жыл бұрын
Leaving so less material is a little risky...
@majsterkowaniepiekarz8974 жыл бұрын
👍👍👏👏
@mrchristian19544 жыл бұрын
Joe I am well aware of what this style of setting is called here in the US I have been a bench jeweler for 47 years. The reason I went with calling it pave is because in Europe and other countries they don't use that terminology .Instead they call beads grains and they call bright cut filet . I thought it would be more understood for all people if I just used the term pave.
@joejeweller76144 жыл бұрын
This not pave’ it is called bead and bright cut.
@antonioflambo72114 жыл бұрын
How deep do you go on the bright cut
@gravirovka634 жыл бұрын
Thank you so much, MAESTRO!!!🙏
@asanoen17774 жыл бұрын
Very nice .....
@sammiokosammioko84174 жыл бұрын
Thankx for shearing
@johnnyangel574 жыл бұрын
Thats shits so blah blah .. Im not built for patience.. I wish i was .. But ... No butts it is wut it is
@giovannytoscano3784 жыл бұрын
Nice work 👏👏👏👍🏻
@sammiokosammioko84174 жыл бұрын
By fare one of de best setting video on KZread but would HV love to see de setting of de gems to as well and sad it can't be downloaded
@carianin52934 жыл бұрын
Great video for those of us learning to do this type of setting. Thanks for uploading.
@tommybeatz46785 жыл бұрын
You did all this with a bur and enset tool ? What did you use to push the prong down to hold the diamond ?
@annh35995 жыл бұрын
I would get so addicted to this if I had the tools!
@owaisqarni69355 жыл бұрын
You can make one for under 65 dollar. KZread "Shaun handmade engraving machine".
@alierem4266 Жыл бұрын
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
@esfitnesspro24555 жыл бұрын
Nice of him to answer none of the questions.
@camronengland15005 жыл бұрын
are you using hand hammering to tap? or some sort of pneumatic punching device
@t0rb1naalborg445 жыл бұрын
And Christian, thank you for showing. Learned a lot, real good camera work. Thanks for all the explaining and tips. The devil is in the details 🙂 Wish I could be an apprentice.😎
@jayprakashsoni1975 жыл бұрын
Where can I buy this engraving tool. Please provide me a link for this if possible.
@mitchellemanalang22035 жыл бұрын
What hummer machice tools do you use?and where can i buy it?thanks for some info!!!
Пікірлер
Thanks for sharing.
You are very talented. It's a joy to watch you engrave.
Wonderful tutorial. Thank you.
Thanks didn't know that it was so easy 😮
what graver are you using?
haha
Beautiful tight work.
I want to see the whole process!!
Q video tan pinche!!!!
Thanks a lot! Very clear explanation❤
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
halo
dijamont
Finally I found a video that shows sculpting up close. Thank you!
Nice work 😍
Hi. I've followed you for years. Can you show the difference between the Enset and your fabulous 👌 designer Pulse Graver.
Interesting stuff...
Oh Iwas so engaged ( oh man pardon the pun lmao) where’s the reveal? I need end result closure!! Loved watching you’re technique, and sharing what you did but man I want to see the finished product!
Super
Thanks for teaching me how to set
Did anyone notice the loose side stone?
Just perfect! Thank you for sharing!
Very good! Thank you for sharing!
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
Rate of push machine
The pusher machine name please
Nice Fing job, good video
👍👍me gusta mucho !! Que profecionalidad
Nice work and great technique ) I enjoyed it!
Hi sir, whats you working distance with the microscope? Is 150mm enough for working space?
Thank u for this helpful video :)
Leaving so less material is a little risky...
👍👍👏👏
Joe I am well aware of what this style of setting is called here in the US I have been a bench jeweler for 47 years. The reason I went with calling it pave is because in Europe and other countries they don't use that terminology .Instead they call beads grains and they call bright cut filet . I thought it would be more understood for all people if I just used the term pave.
This not pave’ it is called bead and bright cut.
How deep do you go on the bright cut
Thank you so much, MAESTRO!!!🙏
Very nice .....
Thankx for shearing
Thats shits so blah blah .. Im not built for patience.. I wish i was .. But ... No butts it is wut it is
Nice work 👏👏👏👍🏻
By fare one of de best setting video on KZread but would HV love to see de setting of de gems to as well and sad it can't be downloaded
Great video for those of us learning to do this type of setting. Thanks for uploading.
You did all this with a bur and enset tool ? What did you use to push the prong down to hold the diamond ?
I would get so addicted to this if I had the tools!
You can make one for under 65 dollar. KZread "Shaun handmade engraving machine".
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
Nice of him to answer none of the questions.
are you using hand hammering to tap? or some sort of pneumatic punching device
And Christian, thank you for showing. Learned a lot, real good camera work. Thanks for all the explaining and tips. The devil is in the details 🙂 Wish I could be an apprentice.😎
Where can I buy this engraving tool. Please provide me a link for this if possible.
What hummer machice tools do you use?and where can i buy it?thanks for some info!!!