You are very talented. It's a joy to watch you engrave.
@kristibbradshaw2 ай бұрын
Wonderful tutorial. Thank you.
@karenlaorange3549 жыл бұрын
I really like your technique and I will have to give it a shot. A really fine demonstration. Thank you.
@jimbettridge31239 жыл бұрын
Just great art! Very well done art and vid Chris.
@talalkavita10 жыл бұрын
You r a real artist.
@erosangelos94224 жыл бұрын
Nice work and great technique ) I enjoyed it!
@gravirovka634 жыл бұрын
Thank you so much, MAESTRO!!!🙏
@Schmalzgau10 жыл бұрын
Amazing!
@entertheoutworld236410 жыл бұрын
majestic ! you've got skillz.
@wadewilson52965 жыл бұрын
I wish I was this talented
@joshuaherrera82859 жыл бұрын
You sir are a wizard
@TheMotoben11 жыл бұрын
Really nice, thanks.
@PLINKER Жыл бұрын
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
@anarchylane11 жыл бұрын
so nice!
@havocmaverick5 жыл бұрын
Looks nice
@rogergarcia30213 жыл бұрын
Nice Fing job, good video
@davidlowrie57910 ай бұрын
Beautiful tight work.
@annab.67068 жыл бұрын
Bravo you are artist
@nicolajhansen72329 жыл бұрын
Amazing
@ehsankhalili6761 Жыл бұрын
Nice work 😍
@mrchristian195411 жыл бұрын
Thanks for the kind words.
@tamsunaskarstass7637
4 жыл бұрын
Hallo! What is the material of who you graving? And what is the graving tool name?
@Guds777 Жыл бұрын
Interesting stuff...
@farukhmirzoboshiev61865 жыл бұрын
Wow you the best
@frednurks785810 жыл бұрын
Gr8 Work. Im curious as to what type of Microscope to use. You go in close and then go light on Magnification. Your thoughts? Regards, Michael
@josejuangarciaalfaro29288 жыл бұрын
Gracias Por compartir
@annh35995 жыл бұрын
I would get so addicted to this if I had the tools!
@owaisqarni6935
5 жыл бұрын
You can make one for under 65 dollar. KZread "Shaun handmade engraving machine".
@alierem4266
Жыл бұрын
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
@giovanniruggiero6228 жыл бұрын
what's the name of the tool?Thank you....amazing work.
@asanoen17774 жыл бұрын
Very nice .....
@jayprakashsoni1975 жыл бұрын
Where can I buy this engraving tool. Please provide me a link for this if possible.
@427yenko679 жыл бұрын
Nice work...i can hear by the knocking of your graver that it seems like you have yours turned down quite a bit more than i was taught..your approach seems a lot more forgiving. I think I'll turned mine down and see if i can be more controlled...question..what do you do about burrs that are kicked up..? Thanks for the video..I always enjoy watching someone who knows what their doing. Thanks again for the video.
@apex.amatuer
7 жыл бұрын
This is an EnSet engraver. They are the most expensive and different to other engravers like the graver max. With the enset you can go as low as one single hit by itself at a time.
@sorin99010 жыл бұрын
great stuff, can I ask you how do you hit that ? is it electrical ? o_0 (this is very new to me)
@bluemoon7378
3 жыл бұрын
@Jake Thejeweller thanks for the advice jake.really helpful,could you recommend some metal to sharpen for engraving stainless?have a project :)also could you recommend some tools to buy that id need?
@pierdolio5 жыл бұрын
I wonder, what material are you engraving? Is it copper, gold, brass or something else?
@christofer89548 жыл бұрын
Are you using a light weight for this?
@bigyo92255 жыл бұрын
很漂亮,刻刀也与众不同
@travismorgan73152 ай бұрын
what graver are you using?
@trekranger8 жыл бұрын
with a pneumatic engraver do you have to push the graver or just control the blade?
@allenl9214
7 жыл бұрын
trekranger depends on the kind of system.. some are foot controlled while some are activated by pushing palm.. both are very easy to handle and requires little to no puahing.. just control the graver speed up or slow down as you wish
@skiboyscuba9 жыл бұрын
Where should one start if they want to start learning engraving?
@apex.amatuer
7 жыл бұрын
First you need at least 5000 dollars lol
@venchilla96
6 жыл бұрын
not true actually, I got my engraving ball brand new for about 500 and gravers can be bought for a decent price if you are hand engraving. You can even find deals on ebay for some non GRS brand engraving balls.
@owaisqarni6935
5 жыл бұрын
You should look for Shaun's handmade engraving machine instructional.
@j2k420111 жыл бұрын
Where can I get that tool and for how much?
@sannasydolai81653 жыл бұрын
The pusher machine name please
@salvatorerametta25589 жыл бұрын
anyone know where I can get an engraving system like this for around 100$? dont want to risk so much money as im just starting
@apex.amatuer
7 жыл бұрын
Look up Shaun Hughes engraving he has videos showing how to make one from things you can buy on ebay for around 100 dollars. Even then though this is no cheap hobby.
@Bb186fo3 жыл бұрын
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
@sannasydolai81653 жыл бұрын
Rate of push machine
@mukhumor5 жыл бұрын
It would be helpful if he showed us his machine.
@flawlessreactionswithmary69487 жыл бұрын
he did great if you agree like
@mrchristian195411 жыл бұрын
Go to engraver.com
@badrakhariunchimeg10315 ай бұрын
haha
@ska6936010 жыл бұрын
hi awesome job man... what kind of engraver is that and where could I get it?
@mrchristian1954
10 жыл бұрын
It's called the Enset. You can get more info at engraver.com
@salvatorerametta2558
9 жыл бұрын
Christian DeCamillis are there any systems that are around 100$? I am just new to engraving and I dont want to risk so much money at first
@mrchristian1954
9 жыл бұрын
Thank You. The tool is the Enset it is a pneumatic driven handpiece and controller that is used as an assist to your hand work. Unfortunately there are n systems in that price range. The best option is to look for something on the used market.
@timothypsaledakis8693
8 жыл бұрын
+Salvatore Rametta Look at 'Hand Push' engraving. A sharpening stone, a steel graver and a mayonnaise jar lid full of pitch to secure your work in can get you started.... Keep bandages handy as slips with push engraving often result in blood being drawn. Old time engravings were done this way, as there were not power tools hundreds of years ago....
@charlesbleile5282
6 жыл бұрын
That's correct but don't try hand pushing in hardened gun steel. That is where air powered gravers or hammer and chisel come in.
Пікірлер: 63
You are very talented. It's a joy to watch you engrave.
Wonderful tutorial. Thank you.
I really like your technique and I will have to give it a shot. A really fine demonstration. Thank you.
Just great art! Very well done art and vid Chris.
You r a real artist.
Nice work and great technique ) I enjoyed it!
Thank you so much, MAESTRO!!!🙏
Amazing!
majestic ! you've got skillz.
I wish I was this talented
You sir are a wizard
Really nice, thanks.
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
so nice!
Looks nice
Nice Fing job, good video
Beautiful tight work.
Bravo you are artist
Amazing
Nice work 😍
Thanks for the kind words.
@tamsunaskarstass7637
4 жыл бұрын
Hallo! What is the material of who you graving? And what is the graving tool name?
Interesting stuff...
Wow you the best
Gr8 Work. Im curious as to what type of Microscope to use. You go in close and then go light on Magnification. Your thoughts? Regards, Michael
Gracias Por compartir
I would get so addicted to this if I had the tools!
@owaisqarni6935
5 жыл бұрын
You can make one for under 65 dollar. KZread "Shaun handmade engraving machine".
@alierem4266
Жыл бұрын
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
what's the name of the tool?Thank you....amazing work.
Very nice .....
Where can I buy this engraving tool. Please provide me a link for this if possible.
Nice work...i can hear by the knocking of your graver that it seems like you have yours turned down quite a bit more than i was taught..your approach seems a lot more forgiving. I think I'll turned mine down and see if i can be more controlled...question..what do you do about burrs that are kicked up..? Thanks for the video..I always enjoy watching someone who knows what their doing. Thanks again for the video.
@apex.amatuer
7 жыл бұрын
This is an EnSet engraver. They are the most expensive and different to other engravers like the graver max. With the enset you can go as low as one single hit by itself at a time.
great stuff, can I ask you how do you hit that ? is it electrical ? o_0 (this is very new to me)
@bluemoon7378
3 жыл бұрын
@Jake Thejeweller thanks for the advice jake.really helpful,could you recommend some metal to sharpen for engraving stainless?have a project :)also could you recommend some tools to buy that id need?
I wonder, what material are you engraving? Is it copper, gold, brass or something else?
Are you using a light weight for this?
很漂亮,刻刀也与众不同
what graver are you using?
with a pneumatic engraver do you have to push the graver or just control the blade?
@allenl9214
7 жыл бұрын
trekranger depends on the kind of system.. some are foot controlled while some are activated by pushing palm.. both are very easy to handle and requires little to no puahing.. just control the graver speed up or slow down as you wish
Where should one start if they want to start learning engraving?
@apex.amatuer
7 жыл бұрын
First you need at least 5000 dollars lol
@venchilla96
6 жыл бұрын
not true actually, I got my engraving ball brand new for about 500 and gravers can be bought for a decent price if you are hand engraving. You can even find deals on ebay for some non GRS brand engraving balls.
@owaisqarni6935
5 жыл бұрын
You should look for Shaun's handmade engraving machine instructional.
Where can I get that tool and for how much?
The pusher machine name please
anyone know where I can get an engraving system like this for around 100$? dont want to risk so much money as im just starting
@apex.amatuer
7 жыл бұрын
Look up Shaun Hughes engraving he has videos showing how to make one from things you can buy on ebay for around 100 dollars. Even then though this is no cheap hobby.
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
Rate of push machine
It would be helpful if he showed us his machine.
he did great if you agree like
Go to engraver.com
haha
hi awesome job man... what kind of engraver is that and where could I get it?
@mrchristian1954
10 жыл бұрын
It's called the Enset. You can get more info at engraver.com
@salvatorerametta2558
9 жыл бұрын
Christian DeCamillis are there any systems that are around 100$? I am just new to engraving and I dont want to risk so much money at first
@mrchristian1954
9 жыл бұрын
Thank You. The tool is the Enset it is a pneumatic driven handpiece and controller that is used as an assist to your hand work. Unfortunately there are n systems in that price range. The best option is to look for something on the used market.
@timothypsaledakis8693
8 жыл бұрын
+Salvatore Rametta Look at 'Hand Push' engraving. A sharpening stone, a steel graver and a mayonnaise jar lid full of pitch to secure your work in can get you started.... Keep bandages handy as slips with push engraving often result in blood being drawn. Old time engravings were done this way, as there were not power tools hundreds of years ago....
@charlesbleile5282
6 жыл бұрын
That's correct but don't try hand pushing in hardened gun steel. That is where air powered gravers or hammer and chisel come in.