Thanks Adam for this awe inspiring detailed video, I am owner of a FLsun V400 and wonder if you think it would be possible to 3d print the wing? I started printing wings with 70cm span in vase mode but not yet tested in air.
@FlyByWireC7 сағат бұрын
amzing
@mhk10584 күн бұрын
This is great, thanks very much, just setting mine up. Any recommendations where to get the nose printed - haven't yet convinced myself I need a 3D printer.
@AdamGdoesFPVКүн бұрын
I've never used a printing service so cannot recommend sorry. I use a really cheap small printer that works very well, worth having if you're into FPV!
@GirlsCountryLiving5 күн бұрын
This is one cool ass video!
@AdamGdoesFPVКүн бұрын
Thanks for comment 😎
@sarcasticfpv38629 күн бұрын
I have this one ordered now im a bit sad... not with the speed part but when you said/showed it with slight amount of wind... Could you somewhere rank the models? Most importantly is stability, 20-25min flighttime, dji O3 compatibility without the model in view somewhat secured in the front and also no overheating, most importantly easy disassembly for transport/storing at home.
@northernfpv95624 күн бұрын
I also have the AtomRC Penguin, Swordfish and Dolphin. Of the 4, I like flying the Penguin the most. It's not very fast but it is incredibly stable and the fpv component positioning is the most well thought out of all 4. Second would probably be the Dolphin, because you can make it go really fast and it just flies really well. Swordfish would be my #3 because I was disappointed with FPV gear location but it is quite nice to fly -- just less fun than the other 3. The RTH versions of these models are great, because the F405 Navi they've added work beautifully with DJI components. I've now flown my Altus a couple of times, and I haven't been very happy with stability and wing loading -- it feels like it can take a lot of battery, but it actually can't.
@AdamGdoesFPVКүн бұрын
By a very very long way the most stable plane is the Ritewing Drak (full sized). Another plane that might suit you that's very stable and easy to break down for transport is the Mini Crosswind. Very stable plane also
@sarcasticfpv3862Күн бұрын
@@AdamGdoesFPV thank you very much!
@wesmagyar11 күн бұрын
I have this plane, and I have a spare OG air unit and I’ve been trying to figure out how to put it in there without it overheating? I’ve been looking online for 3-D prints that would work and I haven’t found anything any tips?
@AdamGdoesFPV9 күн бұрын
I first ran the original AU on this plane. I used no 3d prints, I just placed it inside the bay on top and then used the black plastic camera mount on top of it that comes with it. Never had any issues with overheating. Enjoy
@wesmagyar9 күн бұрын
@@AdamGdoesFPVinteresting, ok. I'll have to give that a shot then
@fpvaq737816 күн бұрын
what sort of flight time and range do you get?
@AdamGdoesFPV16 күн бұрын
@@fpvaq7378 can’t really give a great answer as I never fly efficiently. When doing some follow shots of my flying buddies MCW recently I was in the air for 1 hour in a single flight but can’t remember what distance was covered. That was on a 4s2p 10,000mah
@aufairsyad827919 күн бұрын
What's your remote range??Over 1 km?
@AdamGdoesFPV17 күн бұрын
Yes as per my other answer 100km+ if you have the right setup and conditions
@aufairsyad827920 күн бұрын
What's your remote range?
@AdamGdoesFPV17 күн бұрын
Crossfire is well known for being able to go beyond 100km on the right setup in the right conditions. I have no interest in going anywhere near this but I use it because it’s really reliable
@austinbaker759920 күн бұрын
About how fast you think it was getting to ?
@AdamGdoesFPV17 күн бұрын
Around 180km/h
@SgtJamesRay28 күн бұрын
I love the sights you see
@dronefilmsgermanyАй бұрын
is there a dji build video?
@AdamGdoesFPV17 күн бұрын
Sorry no but it’s fairly simple to install DJI as it’s just about connecting your AU to your FC.
@smackfpvАй бұрын
Hell yeah!
@FpvFunFlyАй бұрын
I have a partom. If I install a D480A filter on my partom, can I get the same performance as RMRC?
@AdamGdoesFPVКүн бұрын
Not something I've tried so can't comment sorry
@FpvFunFlyАй бұрын
It's a great comparison, good job!👍
@AdamGdoesFPVКүн бұрын
Thanks! 👍 Glad it was useful 😃
@offaxisfpvАй бұрын
you make it look sooo easy!!! awesome. thank you!!
@AdamGdoesFPV17 күн бұрын
Happy to help!
@gilmarfernandes4915Ай бұрын
Wonderful video, congratulations.
@AdamGdoesFPVАй бұрын
Thanks 🙌
@ElJinete66Ай бұрын
Hi! Congratulations and thanks for the video!! It's very helpful. I am getting into the FPV world, and have some questions: I am developing a fixed wing. I want to have two cameras, one fixed analog runcam to fly, and a second gimbal camera (SIYI A8 or similar) to track objects. In both cases the video would be live. Is this GS able to stream both signals in long range flights? Thanks!
@AdamGdoesFPVКүн бұрын
Hi, this setup is not designed for streaming 2 signals.If I was doing that I'd probably consider this ground station for receiving the FPV feed and then I'd add a second transmitter for the gimbal on 5.8g, probably digital.
@Salomon1502Ай бұрын
Love your videos-straight to the point. This plane might be my style of flying. Thanks for the honest and professional opinion Adam. Honestly, Adam, I've watched many similar videos about this model, but others complained that you have to put in a large battery to balance the CG (center of gravity) or that they almost crashed the twin-engine plane during a failed hand launch. Consequently, their reviews of the product miss the point, considering that all it takes is adding a few grams of weight to the tail. This was trivial and obvious to you, but for some reason, it didn't occur to other 'professional' FPV pilots, which immediately reflected negatively on their reviews of this plane.
@AdamGdoesFPVАй бұрын
Hey buddy, thanks for watching and for the great feedback :) I try not to watch other reviews so that it doesn't influence mine, so I didn't realise this was the case with the other reviewers, very interesting! I actually expected the launch to be a bit sketchy but as you saw it went out with no issues at all... even on a day with zero wind! Odd that the other reviewers wouldn't think to add a little weight. I really try to avoid it when possible and it's very rare that I need to. 10g isn't the end of the world though :) Thanks again 🙌
@mhk10584 күн бұрын
You do have to put in a large battery or weight up front if you aren't using that longer nose. I still had to add weight to the front using a 320gm 3500mah 4s lipo. Maybe different using a big Li-ion and that long nose adds quite a bit of leverage to the 40-50gms of VTX and camera.
@beyondfossilАй бұрын
New subscriber here. I'm liking the review format with exciting actual footage, cuts to build close-ups as appropriate, and good commentary.
@AdamGdoesFPVАй бұрын
Thank you for the great feedback and welcome to my channel 😃
@smithe68Ай бұрын
Nice review and just general thoughts on this plane. RCGroups, and the member you mentioned, has been a treasure trove of info for me in my fixed wing journey. I’m really enjoying mine, I just put the AtomRC pan servo on mine in the GPS location and moved the GPS to the rear hatch. It’s working well and hasn’t seemed to affect launch or anything else. I wish I could find the 7000mah battery in stock somewhere but it seems to be unavailable everywhere.
@AdamGdoesFPVАй бұрын
Hey, thanks for watching and for the comment. Yes his design skills are obviously very good and he seems a knowledgeable guy, so I don't doubt what you say 😃 Interesting setup you've gone for, I do like a pan, and it's also fun when the plane is in shot (some people don't like that). I think ZOHD stopped making the Lionpack a long time ago, at least the 7000 anyway. Seems that 95% of people are flying with DIY packs. Cheers
@allysoncheynes1216Ай бұрын
Well done, thank you.
@AdamGdoesFPVАй бұрын
Thanks for watching!
@razeaz10Ай бұрын
Hello, please fit the battery ZOHD 4S2P 7Ah, to swords.Thanks
@AdamGdoesFPVАй бұрын
I actually don’t have the SF anymore, sold off a lot of planes this spring, but the SF is one I do miss a bit actually. From memory there was no way I could get CG with that 4s2p. With just a 3,000mah 4S it was too nose heavy until adding the tail fins. That’s what I mean about the SF not being suitable to load up with a large battery like the Altus
@razeaz10Ай бұрын
Thanks
@DJI_SilesiaАй бұрын
You run the Polar camera - change VTX to Vista, lighter and you don't need 1080p recording anyway as Polar gives 720p only.
@AdamGdoesFPVАй бұрын
I’d always go for a vista over AU as I don’t even record onboard. I just happened to have an unused AU laying around and the nose was designed by someone else for an AU so I just went with it. Would be able to save a few grams there though
@DJI_SilesiaАй бұрын
@@AdamGdoesFPV Fair enough :) I used that design to create my nose for O3 version :) It's on Thingiverse too.
@StupidusMaximusTheFirstАй бұрын
Wow amazing how you managed to get those 2 high speed crashes back home. Maybe PLA (LW?) or a stronger 3d printing material is better than foam - it's better if something breaks than if it distorts, and foam probably distorts way easier than PLA would break I think. Then again, maybe they wouldn't make it home so I don't know...
@AdamGdoesFPVАй бұрын
For me foam is way better than any 3D printed plane. One small knock and they brake as they’re brittle. Have to try and separate sections without damaging them to replace broken part with fresh print. Foam can be fixed and reshaped in minutes or even just in the field with a portable hot glue gun (been done many times 😅)
@mpsaeris1855Ай бұрын
Nice flight. I am surprised the rolls and loops are not as lazy as i expected. It will make an interesting platform with the gimbal... Love the idea of the box and the plane being so compact. Nick Cage would be jealous of your #gonein40s
@AdamGdoesFPVАй бұрын
I was surprised how easy it loops and rolls too, but definitely not what I’d be doing very often flying this one. The box it comes in is very small, like a large shoebox. I’ll rename it from Altus to Elenor 🤪
@mpsaeris1855Ай бұрын
@@AdamGdoesFPV 🤣. I like Elenor. At least your nose looks decent. When I was sketching mind, I was thinking of deadly viperr or mamba. But it turned into something that resembles badly injured platypus...
@flat-eartherАй бұрын
how much did you pay for this plane?
@AdamGdoesFPVАй бұрын
Depends where you are. For me from EU warehouse I can see PNP is €135ish delivered. tiny.cc/ZOHD-Altus
@CrunklefloopАй бұрын
GPS bay looks a bit of an afterthought. Right next to the magnets and with the cover sitting proud of the main body in the sleepstream.
@AdamGdoesFPVАй бұрын
I think it’s just the default ZOHD design as most of their models have it. The magnets don’t seemed to have caused any issues so far. Thanks for watching 👍🏻
@cobra4829Ай бұрын
thank you, nice reviev
@AdamGdoesFPVАй бұрын
Glad you liked it! Thanks 🤩
@domgoff999Ай бұрын
I love my Altus been out to 15km so far - kzread.info/dash/bejne/q2SA0NWHp8nMkdo.html
@AdamGdoesFPVАй бұрын
Nice, doesn’t surprise me that these things could travel far 👌🏻
@EnglishTurbinesАй бұрын
Great overview. Amazing how much effort they give to those digital camera options. Then nothing for the main digital FPV camera and VRX. It all seems a bit backwards to me...🤔😳😳🇬🇧
@AdamGdoesFPVАй бұрын
Yeah I agree it’s strange they didn’t prioritise digital vtx mounting. Biggest negative point on this model but as per usual with a bit of work you can overcome this. Seems like they’re still thinking of analogue setup with 2 x wing bays
@EnglishTurbinesАй бұрын
@@AdamGdoesFPV Yes, trying to cover all the angles I guess...If you're using an 03 setup or even a Pro Walksnail camera, the obligatory GoPro arrangement seems superfluous to me...That said, delete the GoPro and add more battery instead...Maybe it's not so bad after all...🤔🤔😏
@mhk1058Ай бұрын
@@AdamGdoesFPV Pretty new to this.... is there a reason you can't put a digital VTX in a wing bay?
@AdamGdoesFPVАй бұрын
@@mhk1058 the cables that go from the digital vtx to the camera are not simple servo cables and they’re quite short. So if you put the digital vtx in the wing you also have to put the FPV camera in the wing
@tennsАй бұрын
any other company uses foam as stiff as hee wing does? Is this similar ?
@AdamGdoesFPVАй бұрын
I’ve not had a Hee wing so can’t compare. But I’d say the Ritewing silver foam is the best stuff we’ve ever seen on an FPV wing
@jasonstationАй бұрын
All those magnets next to the GPS cause any problems?
@AdamGdoesFPVАй бұрын
No issues so far👍🏻
@jojo-._.Ай бұрын
I dont care if it performs well, as long as it flys the looks make up for everything xD
@AdamGdoesFPVАй бұрын
😆
@jotham123Ай бұрын
Awesome to see EPP being used! EPP is magic, imo is the ultimate foam for RC models. You can stomp on the stuff and it just returns to 99% of it's original shape.
@tennsАй бұрын
is it what hee wing uses ?
@jotham123Ай бұрын
@@tenns hee wing T1? Yes. An old school building method was to cover models with kevlar, bonding it down with thinned adhesive shoe-goo. Unless you broke a spar that shit aint breaking. Adds a fair bit of weight though wouldn't do it for anything smaller than 1m wingspan.
@AdamGdoesFPVАй бұрын
Yeah really good to see they’re not using the BEPP anymore 👌🏻
@stevietee10Ай бұрын
Great review as always, informed, honest and fair. Thank You (not for me though, I'll keep my Swordfish 😃)
@AdamGdoesFPVАй бұрын
Good choice 👍🏻
@ClarkDroneFilmsАй бұрын
Guessing you are using lipo, what brand and capacity? 5S?
@AdamGdoesFPVАй бұрын
Hi, full setup and links in video description 👍🏻 5S 4,000 x 2 parallel. Turnigy lipo.
@ClarkDroneFilmsАй бұрын
@@AdamGdoesFPV thanks sorry missed that 👍🏼
@Feivel0286Ай бұрын
Nice, I also became a fan of the Mini Crosswind this year. Better late than never :)
@AdamGdoesFPVАй бұрын
Great plane it is 🤩 king of long range
@AdamGdoesFPVАй бұрын
Thanks for watching! You can buy a ZOHD Altus here: tiny.cc/ZOHD-Altus If there's anything you want to know that I didn't cover just drop a comment below and I'll get back to you. Cheers
@cococadidi28 күн бұрын
I have no inav experience. Plus also when I wired it up and I used a y connector off the v-tail, there's no way to get both servos to come up at the same time. They act as a rudder
@AdamGdoesFPV28 күн бұрын
@@cococadidi go to the mixer tab and set one of the pitch servos to a negative weight.
@trinol-kq3um2 ай бұрын
Wonderful. But what is the video signal delay with so many intermediaries?
@AdamGdoesFPV2 ай бұрын
Next to zero. Otherwise I wouldn’t have done it and I wouldn’t have been able to pull of flights like this one: kzread.info/dash/bejne/aJ2nr5mIaK3Alqw.html
@EnglishTurbines2 ай бұрын
Perfect flying conditions....🤔😳😏🇬🇧
@AdamGdoesFPV2 ай бұрын
Pretty decent above 70m, quite gusty below that 🥴
@stevietee102 ай бұрын
Great to see you back 👍
@AdamGdoesFPV2 ай бұрын
Thanks 👍😃
@blackbirdboy12 ай бұрын
Looking forward to the extended cut.
@AdamGdoesFPV2 ай бұрын
I kept this one short as most of it was just same same 😆😅
@grim-upnorth2 ай бұрын
I've had to clear my workshop to store all the wood for my shed build. In the process I had to pack down all my planes that were hanging on the walls, back into the transport boxes I used to move into my new house. My Albabird can't be packed down though, because I soldered the ESC power wires directly onto the flight controller, so the wings can't come off. So for now, the Albabird is right here next to me, in my home office. Seeing this video, and looking over at the Albabird, there's no way I'm just going to give up on this hobby, even though I haven't flown since May 2022. When the shed is built, and things settle down, I'll go up into the hills and get back on the wagon, because I really miss times like this.
@AdamGdoesFPV2 ай бұрын
Glad to hear it mate 🤩 the Albabird is a really nice all rounder with no stress. This was a really enjoyable flight taking in the views
@RubyS.12 ай бұрын
Weird I was just thinking about you yesterday as I was struggling to laminate these stupid elevons
@AdamGdoesFPV2 ай бұрын
Which elevons? Shouldn’t be too hard with them only being a small part of the plane 😅
@petercsizmadia96422 ай бұрын
This is amazing. I'm envious like hell 🙂
@AdamGdoesFPV2 ай бұрын
😃😅
@tiburcioassustadoramentein86142 ай бұрын
Meu Deus ❤
@nictimoulete76512 ай бұрын
Adam G never does good videos as always !
@AdamGdoesFPV2 ай бұрын
😆😆
@Prevettspecialdesign2 ай бұрын
What part of Wales are you in? I’m from Pembrokeshire, but now live in Sweden. Weather has just got better here too. Looking forward to more of your videos 👍🏻
@AdamGdoesFPV2 ай бұрын
I’m actually in Ireland 😄 Sweden must have some great places to fly!
@PrevettspecialdesignАй бұрын
@@AdamGdoesFPV ah right I always thought you were from Wales. 🏴 Sweden has 1000s of places to fly, so many big lakes and rivers to track along and best of all hardly any people to worry about 👍🏻.
@yalmadiable2 ай бұрын
Are you still kicking in drone area because I have a radio question mate
Пікірлер
Thanks Adam for this awe inspiring detailed video, I am owner of a FLsun V400 and wonder if you think it would be possible to 3d print the wing? I started printing wings with 70cm span in vase mode but not yet tested in air.
amzing
This is great, thanks very much, just setting mine up. Any recommendations where to get the nose printed - haven't yet convinced myself I need a 3D printer.
I've never used a printing service so cannot recommend sorry. I use a really cheap small printer that works very well, worth having if you're into FPV!
This is one cool ass video!
Thanks for comment 😎
I have this one ordered now im a bit sad... not with the speed part but when you said/showed it with slight amount of wind... Could you somewhere rank the models? Most importantly is stability, 20-25min flighttime, dji O3 compatibility without the model in view somewhat secured in the front and also no overheating, most importantly easy disassembly for transport/storing at home.
I also have the AtomRC Penguin, Swordfish and Dolphin. Of the 4, I like flying the Penguin the most. It's not very fast but it is incredibly stable and the fpv component positioning is the most well thought out of all 4. Second would probably be the Dolphin, because you can make it go really fast and it just flies really well. Swordfish would be my #3 because I was disappointed with FPV gear location but it is quite nice to fly -- just less fun than the other 3. The RTH versions of these models are great, because the F405 Navi they've added work beautifully with DJI components. I've now flown my Altus a couple of times, and I haven't been very happy with stability and wing loading -- it feels like it can take a lot of battery, but it actually can't.
By a very very long way the most stable plane is the Ritewing Drak (full sized). Another plane that might suit you that's very stable and easy to break down for transport is the Mini Crosswind. Very stable plane also
@@AdamGdoesFPV thank you very much!
I have this plane, and I have a spare OG air unit and I’ve been trying to figure out how to put it in there without it overheating? I’ve been looking online for 3-D prints that would work and I haven’t found anything any tips?
I first ran the original AU on this plane. I used no 3d prints, I just placed it inside the bay on top and then used the black plastic camera mount on top of it that comes with it. Never had any issues with overheating. Enjoy
@@AdamGdoesFPVinteresting, ok. I'll have to give that a shot then
what sort of flight time and range do you get?
@@fpvaq7378 can’t really give a great answer as I never fly efficiently. When doing some follow shots of my flying buddies MCW recently I was in the air for 1 hour in a single flight but can’t remember what distance was covered. That was on a 4s2p 10,000mah
What's your remote range??Over 1 km?
Yes as per my other answer 100km+ if you have the right setup and conditions
What's your remote range?
Crossfire is well known for being able to go beyond 100km on the right setup in the right conditions. I have no interest in going anywhere near this but I use it because it’s really reliable
About how fast you think it was getting to ?
Around 180km/h
I love the sights you see
is there a dji build video?
Sorry no but it’s fairly simple to install DJI as it’s just about connecting your AU to your FC.
Hell yeah!
I have a partom. If I install a D480A filter on my partom, can I get the same performance as RMRC?
Not something I've tried so can't comment sorry
It's a great comparison, good job!👍
Thanks! 👍 Glad it was useful 😃
you make it look sooo easy!!! awesome. thank you!!
Happy to help!
Wonderful video, congratulations.
Thanks 🙌
Hi! Congratulations and thanks for the video!! It's very helpful. I am getting into the FPV world, and have some questions: I am developing a fixed wing. I want to have two cameras, one fixed analog runcam to fly, and a second gimbal camera (SIYI A8 or similar) to track objects. In both cases the video would be live. Is this GS able to stream both signals in long range flights? Thanks!
Hi, this setup is not designed for streaming 2 signals.If I was doing that I'd probably consider this ground station for receiving the FPV feed and then I'd add a second transmitter for the gimbal on 5.8g, probably digital.
Love your videos-straight to the point. This plane might be my style of flying. Thanks for the honest and professional opinion Adam. Honestly, Adam, I've watched many similar videos about this model, but others complained that you have to put in a large battery to balance the CG (center of gravity) or that they almost crashed the twin-engine plane during a failed hand launch. Consequently, their reviews of the product miss the point, considering that all it takes is adding a few grams of weight to the tail. This was trivial and obvious to you, but for some reason, it didn't occur to other 'professional' FPV pilots, which immediately reflected negatively on their reviews of this plane.
Hey buddy, thanks for watching and for the great feedback :) I try not to watch other reviews so that it doesn't influence mine, so I didn't realise this was the case with the other reviewers, very interesting! I actually expected the launch to be a bit sketchy but as you saw it went out with no issues at all... even on a day with zero wind! Odd that the other reviewers wouldn't think to add a little weight. I really try to avoid it when possible and it's very rare that I need to. 10g isn't the end of the world though :) Thanks again 🙌
You do have to put in a large battery or weight up front if you aren't using that longer nose. I still had to add weight to the front using a 320gm 3500mah 4s lipo. Maybe different using a big Li-ion and that long nose adds quite a bit of leverage to the 40-50gms of VTX and camera.
New subscriber here. I'm liking the review format with exciting actual footage, cuts to build close-ups as appropriate, and good commentary.
Thank you for the great feedback and welcome to my channel 😃
Nice review and just general thoughts on this plane. RCGroups, and the member you mentioned, has been a treasure trove of info for me in my fixed wing journey. I’m really enjoying mine, I just put the AtomRC pan servo on mine in the GPS location and moved the GPS to the rear hatch. It’s working well and hasn’t seemed to affect launch or anything else. I wish I could find the 7000mah battery in stock somewhere but it seems to be unavailable everywhere.
Hey, thanks for watching and for the comment. Yes his design skills are obviously very good and he seems a knowledgeable guy, so I don't doubt what you say 😃 Interesting setup you've gone for, I do like a pan, and it's also fun when the plane is in shot (some people don't like that). I think ZOHD stopped making the Lionpack a long time ago, at least the 7000 anyway. Seems that 95% of people are flying with DIY packs. Cheers
Well done, thank you.
Thanks for watching!
Hello, please fit the battery ZOHD 4S2P 7Ah, to swords.Thanks
I actually don’t have the SF anymore, sold off a lot of planes this spring, but the SF is one I do miss a bit actually. From memory there was no way I could get CG with that 4s2p. With just a 3,000mah 4S it was too nose heavy until adding the tail fins. That’s what I mean about the SF not being suitable to load up with a large battery like the Altus
Thanks
You run the Polar camera - change VTX to Vista, lighter and you don't need 1080p recording anyway as Polar gives 720p only.
I’d always go for a vista over AU as I don’t even record onboard. I just happened to have an unused AU laying around and the nose was designed by someone else for an AU so I just went with it. Would be able to save a few grams there though
@@AdamGdoesFPV Fair enough :) I used that design to create my nose for O3 version :) It's on Thingiverse too.
Wow amazing how you managed to get those 2 high speed crashes back home. Maybe PLA (LW?) or a stronger 3d printing material is better than foam - it's better if something breaks than if it distorts, and foam probably distorts way easier than PLA would break I think. Then again, maybe they wouldn't make it home so I don't know...
For me foam is way better than any 3D printed plane. One small knock and they brake as they’re brittle. Have to try and separate sections without damaging them to replace broken part with fresh print. Foam can be fixed and reshaped in minutes or even just in the field with a portable hot glue gun (been done many times 😅)
Nice flight. I am surprised the rolls and loops are not as lazy as i expected. It will make an interesting platform with the gimbal... Love the idea of the box and the plane being so compact. Nick Cage would be jealous of your #gonein40s
I was surprised how easy it loops and rolls too, but definitely not what I’d be doing very often flying this one. The box it comes in is very small, like a large shoebox. I’ll rename it from Altus to Elenor 🤪
@@AdamGdoesFPV 🤣. I like Elenor. At least your nose looks decent. When I was sketching mind, I was thinking of deadly viperr or mamba. But it turned into something that resembles badly injured platypus...
how much did you pay for this plane?
Depends where you are. For me from EU warehouse I can see PNP is €135ish delivered. tiny.cc/ZOHD-Altus
GPS bay looks a bit of an afterthought. Right next to the magnets and with the cover sitting proud of the main body in the sleepstream.
I think it’s just the default ZOHD design as most of their models have it. The magnets don’t seemed to have caused any issues so far. Thanks for watching 👍🏻
thank you, nice reviev
Glad you liked it! Thanks 🤩
I love my Altus been out to 15km so far - kzread.info/dash/bejne/q2SA0NWHp8nMkdo.html
Nice, doesn’t surprise me that these things could travel far 👌🏻
Great overview. Amazing how much effort they give to those digital camera options. Then nothing for the main digital FPV camera and VRX. It all seems a bit backwards to me...🤔😳😳🇬🇧
Yeah I agree it’s strange they didn’t prioritise digital vtx mounting. Biggest negative point on this model but as per usual with a bit of work you can overcome this. Seems like they’re still thinking of analogue setup with 2 x wing bays
@@AdamGdoesFPV Yes, trying to cover all the angles I guess...If you're using an 03 setup or even a Pro Walksnail camera, the obligatory GoPro arrangement seems superfluous to me...That said, delete the GoPro and add more battery instead...Maybe it's not so bad after all...🤔🤔😏
@@AdamGdoesFPV Pretty new to this.... is there a reason you can't put a digital VTX in a wing bay?
@@mhk1058 the cables that go from the digital vtx to the camera are not simple servo cables and they’re quite short. So if you put the digital vtx in the wing you also have to put the FPV camera in the wing
any other company uses foam as stiff as hee wing does? Is this similar ?
I’ve not had a Hee wing so can’t compare. But I’d say the Ritewing silver foam is the best stuff we’ve ever seen on an FPV wing
All those magnets next to the GPS cause any problems?
No issues so far👍🏻
I dont care if it performs well, as long as it flys the looks make up for everything xD
😆
Awesome to see EPP being used! EPP is magic, imo is the ultimate foam for RC models. You can stomp on the stuff and it just returns to 99% of it's original shape.
is it what hee wing uses ?
@@tenns hee wing T1? Yes. An old school building method was to cover models with kevlar, bonding it down with thinned adhesive shoe-goo. Unless you broke a spar that shit aint breaking. Adds a fair bit of weight though wouldn't do it for anything smaller than 1m wingspan.
Yeah really good to see they’re not using the BEPP anymore 👌🏻
Great review as always, informed, honest and fair. Thank You (not for me though, I'll keep my Swordfish 😃)
Good choice 👍🏻
Guessing you are using lipo, what brand and capacity? 5S?
Hi, full setup and links in video description 👍🏻 5S 4,000 x 2 parallel. Turnigy lipo.
@@AdamGdoesFPV thanks sorry missed that 👍🏼
Nice, I also became a fan of the Mini Crosswind this year. Better late than never :)
Great plane it is 🤩 king of long range
Thanks for watching! You can buy a ZOHD Altus here: tiny.cc/ZOHD-Altus If there's anything you want to know that I didn't cover just drop a comment below and I'll get back to you. Cheers
I have no inav experience. Plus also when I wired it up and I used a y connector off the v-tail, there's no way to get both servos to come up at the same time. They act as a rudder
@@cococadidi go to the mixer tab and set one of the pitch servos to a negative weight.
Wonderful. But what is the video signal delay with so many intermediaries?
Next to zero. Otherwise I wouldn’t have done it and I wouldn’t have been able to pull of flights like this one: kzread.info/dash/bejne/aJ2nr5mIaK3Alqw.html
Perfect flying conditions....🤔😳😏🇬🇧
Pretty decent above 70m, quite gusty below that 🥴
Great to see you back 👍
Thanks 👍😃
Looking forward to the extended cut.
I kept this one short as most of it was just same same 😆😅
I've had to clear my workshop to store all the wood for my shed build. In the process I had to pack down all my planes that were hanging on the walls, back into the transport boxes I used to move into my new house. My Albabird can't be packed down though, because I soldered the ESC power wires directly onto the flight controller, so the wings can't come off. So for now, the Albabird is right here next to me, in my home office. Seeing this video, and looking over at the Albabird, there's no way I'm just going to give up on this hobby, even though I haven't flown since May 2022. When the shed is built, and things settle down, I'll go up into the hills and get back on the wagon, because I really miss times like this.
Glad to hear it mate 🤩 the Albabird is a really nice all rounder with no stress. This was a really enjoyable flight taking in the views
Weird I was just thinking about you yesterday as I was struggling to laminate these stupid elevons
Which elevons? Shouldn’t be too hard with them only being a small part of the plane 😅
This is amazing. I'm envious like hell 🙂
😃😅
Meu Deus ❤
Adam G never does good videos as always !
😆😆
What part of Wales are you in? I’m from Pembrokeshire, but now live in Sweden. Weather has just got better here too. Looking forward to more of your videos 👍🏻
I’m actually in Ireland 😄 Sweden must have some great places to fly!
@@AdamGdoesFPV ah right I always thought you were from Wales. 🏴 Sweden has 1000s of places to fly, so many big lakes and rivers to track along and best of all hardly any people to worry about 👍🏻.
Are you still kicking in drone area because I have a radio question mate
Yup