There is a mod to the PVC valve to get more ventilation to the engine. Drill your pcv valve out top 7/16 hole, and bottom 5/16 hole. This will increases the ventilation to the whole engine witch I read is not the best when they built the 3.6 VVT Direct Injection engine.
@jeffalbro45348 сағат бұрын
Also clean the PVC all the time, it will help the inside of the engine a lot.
@AbdulWahab-zq7xxКүн бұрын
AAA
@Ozziie4157 күн бұрын
Damnn can you swap mines! Great Job!
@coryvazquez22009 күн бұрын
Thank you so much for the video. Helped quite a bit. I ordered my cooling system upgrade from Euro AMP. It was an aluminum version and fit perfectly with no issue at all. Thanks again!
@eddmoremudege113711 күн бұрын
Please help.l.want to replace my 1.6l. Ecoboost 2013 ford kuga with a new engine what wld be its life.😢
@eddmoremudege113711 күн бұрын
I have a ford kuga 1.6l ecoboost it has already snapped a timing belt due to faulty tensioner
@jamesk.herder62411 күн бұрын
Thank you Boss Auto for your video. It was very informative and helpful. I have a 2017 3.6 , I’m trying to increase its life. I change oil every 5k - 6k miles. When should the spark plugs be changed for that engine? Keep up the good work.
@juancoleon452012 күн бұрын
PLEASE Elaborate on your Mo New Head Gasket Approach??>>!! You have me COMPLETLY DIALED IN on why I cant Replace the headgasket, and while Im there, Weld those cut / slits between the cylinder walls, Re-Zero the deck etc etc... But Why Bro... You have my attention, And Im Desperately trying to go down that road with you - But I dont wanna over-step.. Thanks Brother
@j.tyler202412 күн бұрын
Also do you need to program the new valve body?
@user-rc7ro4up1x11 күн бұрын
I was told if you buy it from the dealer they already come programmed you just have to provide the vin
@j.tyler202412 күн бұрын
Whats the valve assembly control.
@user-fs9ir2ox3b15 күн бұрын
I buy the cylinder head after over heating for my ford kuga 1.6 but still low compression maybe can i buy a block also someone help me please I'm very stressed 😢
@IkelosV617 күн бұрын
I read somewhere that after a certain year gm's 3.6 improved the timing chain
@thecraftsmanclassicsllc786420 күн бұрын
Does this require the tcm to be reprogrammed?
@joeyram9557Ай бұрын
Do you need to change both the TCM and the Valve Body or just the Valve Body?
@vsh510Ай бұрын
Where is your shop located ? And do you have a link on where to purchase valve body
@banterdose650Ай бұрын
does it include RR Evoque 2.0? thanks
@jay_JalapenoАй бұрын
its not just the crankcase breather and the oil life intervals . people need to take their cars to high rpms once and awhile because they need to get the oil moving around the engine and thats only done at high rpms. dear god dont use flush because that will cause leaks . use good oil , change it every 4 to 5k and take it to high rpms atleast once a drive
@Manuel.h.gАй бұрын
I just got one used 2013 with over 200k miles and is running ok little weird when pressing on gas to go over 70 miles per hour in the freeway hopefully last me an other year
@edwardmissouri2216Ай бұрын
I have a 2015 impala 3.6 with 75,000 miles. I change my oil every 4-5,000 miles. I use the Napa gold oil filter as well. As far as the engine breathing, the rear bank of the engine has a breather tube on the valve cover, but it is not removable. I learned the hard way on that. I'm guessing periodically i can run a piece of wire down that tube and keep it open. I never have any oil in my intake or on the butterfly. I don't have issues with the engine using any oil either. So far, it's a great engine. I'm thinking about adding some engine flush before my next oil change. My brother had a Buick with the same engine. His engine coded with the dreaded timing chain issue, and started mis firing. He drove it, after I warned him not to. Big mistake. It threw a rod through the block. That was a dumb move.
@edmonmayfield2446Ай бұрын
Does the valve body have to be programmed
@OscarGonzalez-ix7djАй бұрын
great video my trans stopped working couple weeks ago it moves but wont shift gears it goes 5mph i never do anything with the transmission fluid cause i hear u dont have to do anything to it my q50 has 146k miles i got it wit 80k n it was 2 years old i have a 2015
@202neweraАй бұрын
I have code P0735 on my g35. It shifts fine until i shift into 5th. Is it the valve body?
@Johhndoe815Ай бұрын
My valve body went out at 127k miles and I never changed the transmission fluid ever and I’m always stepping on the gas😂
@Lamban83Ай бұрын
just had that code with p0500 on my 2015 Q70, went to mechanic shop and was told to change the transmission. I'm looking for someone knowledgeable like this guy in NYC area , any suggestions?
@joshuanelson2511Ай бұрын
How about the code p2857 whats the possible cause ?
@DemogruntАй бұрын
So the solution is: Do not buy a vehicle with a Ford 1.6L, 1.5L, 2.0L Got it. Too bad I already have an Escape with a 1.5L at 100k miles and it started throwing blue smoke at startup after an oil change when the garage put in too much oil.. FFS thanks for the non help solution vid
@vlxnetrap2 ай бұрын
So I have a 2009 g37. I just bought a valve body off of a 2010 g37. Will it need to be reprogrammed ?
@vlxnetrap2 ай бұрын
Plz lemme know 😭🙏🏼
@jayr8534Ай бұрын
Did it need to be programmed?
@vlxnetrapАй бұрын
@@jayr8534 I still dk 🤦🏻♂️ have the part but haven’t been able to get a response or any information from anybody
@jvq916826 күн бұрын
You’ll definitely need to get it reprogrammed. Save your old tcm so they can get the information they need off that one to transfer to the used one
@poogzie2 ай бұрын
What correlates to a p0008 From your experience that's what I have on my car at the moment
@car5car52 ай бұрын
dislike for music😡
@car5car52 ай бұрын
reshoot the video w/o junk music
@caseylavoie39862 ай бұрын
about how much fluid did you use to refill?
@rockracing3252 ай бұрын
i changed mine at 5000 with full syn and mine still did the chain in
@bobwoods14752 ай бұрын
Many thanks for the update, when you say a block guard are you referring to shims in the groove, same as the Volvo fix? Thanks again.
@patriciap12142 ай бұрын
I just bought a Chevy 2024 premier blazer. I’ve had it for a little while now and I drive it to work around 8 to 10 miles a day one-way. I pulled it in my garage and change the oil at 2000 miles and that oil came out really black at 2000 miles so believe it or not I will be changing the oil at every 2000 mile intervals I know that’s excessive but I had a 1987 Chevy pick up with a 350 in it throttlebody injection and I changed you on that every 2000 miles, I had the engine for 425,000 miles and I still have the truck today with the same engine no problems and it doesn’t burn oil. I know the engines different than this one but I will be changing the oil just like that I can’t believe how black the oil got 2000 miles if you could use the GM oil monitor in your car all they want you to do is make sure it gets past the warranty and then you’re on your own. Thanks for your video. I’m sorry about the car but this is what I have now thanks again you really explained it well.
@barryjames9912 ай бұрын
Where are you located
@beboboymann38232 ай бұрын
If our government wasn’t a mistress of the auto industry it would step up and make Ford replace ALL of these engines so strapped families who put their faith in Ford wouldn’t be stuck in an impossible place. But, this administration is more interested in paying for college loans for students who don’t have the burden of providing for a family like so many owners of Ford cars with this crap design. Come on Biden…..quit supporting potential voters and have the balls to go up against big industries sneering at us consumers as they sell us unsuspecting customers their crap!!
@brookstooson5982 ай бұрын
Yes Sir engine flush with every oil change. My 2014 impala gets 2 oil changes a year. Nov & May so I'm ready for winter & summer. My tip is to jack the car up on the driver side about six inches and let it drain for at least 1 hour. Or until you can count to 30 without seeing any oil drip out. The oil drain plug is on the passenger side facing the rear of the car. I drive about 10000 miles a year.
@alexking33352 ай бұрын
bro i buy 1 from ebay and when i put it i was hard to shift only reverse but i call my mecanic and he tell me that i need to buy a new 1 from nissan no from ebay
@jesuspena53662 ай бұрын
What do you recommend if I got a low coast brake solenoid code and my reverse doesent go into gear at times , I have a 3.7 automatic transmission
@rschneid19962 ай бұрын
I have a 2011 Buick Enclave with 184k miles on it. I follow the factory oil change guide (7,500 miles) and infrequently add a ceramic additive. I think changing the oil every 5,000 is a prudent suggestion. I also encourage replacing the PCV valve and breather tubes every 75k miles. Enlarging the breather holes on the PCV valve is strongly encouraged.
@TimothySpadano2 ай бұрын
My mom has a 2012 chevy traverse. I do the oil changes for her every 5k miles. It has 190k on it now and its running great.
@kelval56792 ай бұрын
More power to you brother. You are good. God bless
@mdhobbssr45663 ай бұрын
To much junk on the over head cam engines. Chain Tentioners is another issue. I prefer the old single can push rod setup
@danesimpson32363 ай бұрын
I have a 2017 escape drinking coolant. Ford should recall those witj this problem I am not alone with this prob.
@anikdasdigital3 ай бұрын
Your videos are amazing. I really like it. I am a new subscriber to your channel. Can I talk with you Boss Automotive?
@ls1nissan3 ай бұрын
No sir those are the input speed sensors, the output speed sensor is on the tail shaft. 9 times out of 10 it's the driver in the TCM that goes out and not the output speed sensor itself.
@tlb23453 ай бұрын
So what do you need to replace?
@ls1nissan3 ай бұрын
@@tlb2345 The whole valve body that the TCM is attached to which is about $1600 - 1700 from the dealer. Stay away from the eBay junk because they really can't be rebuilt. Just did one on my buddies 2017 Armada. Truck is running well now.
@steviesawney-pc3lbАй бұрын
The output speed sensor is connect to the valve body wire with metal looking valve. If u get a that code change output speed sensor and the valve body
@jaygiant10Ай бұрын
Reading these comments feel like I’m fucked out of 2k
@newthings521517 күн бұрын
@@ls1nissanwhere did you bought it from
@MendicantBias13 ай бұрын
Timing chain looks like Audi designed it 😂
@swag71003 ай бұрын
i did this job but i cant bleed the system. tooo much air... idk what the issue is what do you recommend
@Nick_the_mechanic2 ай бұрын
Vacuum fill it
@dreamstasis56723 ай бұрын
Thanks the break down of the cvt. Ive always suspected that the coolers size and efficiency was to blame. Simple parts for them to have their part supplier upgrade. But they choose not to .....to knock you over the head for 8-10k at dealer ship. Id take the the interchiller cooler set up from q50 3.0t and modify for the Maxima and Altimas. And change fluid every 9mos. Amsoil cvt trans fluid as well. Suspect Nissan made fluid to fail suddenly as well lol it
@ImpalaSS083 ай бұрын
Without even watching this guys Video. Change oil religiously!
Пікірлер
There is a mod to the PVC valve to get more ventilation to the engine. Drill your pcv valve out top 7/16 hole, and bottom 5/16 hole. This will increases the ventilation to the whole engine witch I read is not the best when they built the 3.6 VVT Direct Injection engine.
Also clean the PVC all the time, it will help the inside of the engine a lot.
AAA
Damnn can you swap mines! Great Job!
Thank you so much for the video. Helped quite a bit. I ordered my cooling system upgrade from Euro AMP. It was an aluminum version and fit perfectly with no issue at all. Thanks again!
Please help.l.want to replace my 1.6l. Ecoboost 2013 ford kuga with a new engine what wld be its life.😢
I have a ford kuga 1.6l ecoboost it has already snapped a timing belt due to faulty tensioner
Thank you Boss Auto for your video. It was very informative and helpful. I have a 2017 3.6 , I’m trying to increase its life. I change oil every 5k - 6k miles. When should the spark plugs be changed for that engine? Keep up the good work.
PLEASE Elaborate on your Mo New Head Gasket Approach??>>!! You have me COMPLETLY DIALED IN on why I cant Replace the headgasket, and while Im there, Weld those cut / slits between the cylinder walls, Re-Zero the deck etc etc... But Why Bro... You have my attention, And Im Desperately trying to go down that road with you - But I dont wanna over-step.. Thanks Brother
Also do you need to program the new valve body?
I was told if you buy it from the dealer they already come programmed you just have to provide the vin
Whats the valve assembly control.
I buy the cylinder head after over heating for my ford kuga 1.6 but still low compression maybe can i buy a block also someone help me please I'm very stressed 😢
I read somewhere that after a certain year gm's 3.6 improved the timing chain
Does this require the tcm to be reprogrammed?
Do you need to change both the TCM and the Valve Body or just the Valve Body?
Where is your shop located ? And do you have a link on where to purchase valve body
does it include RR Evoque 2.0? thanks
its not just the crankcase breather and the oil life intervals . people need to take their cars to high rpms once and awhile because they need to get the oil moving around the engine and thats only done at high rpms. dear god dont use flush because that will cause leaks . use good oil , change it every 4 to 5k and take it to high rpms atleast once a drive
I just got one used 2013 with over 200k miles and is running ok little weird when pressing on gas to go over 70 miles per hour in the freeway hopefully last me an other year
I have a 2015 impala 3.6 with 75,000 miles. I change my oil every 4-5,000 miles. I use the Napa gold oil filter as well. As far as the engine breathing, the rear bank of the engine has a breather tube on the valve cover, but it is not removable. I learned the hard way on that. I'm guessing periodically i can run a piece of wire down that tube and keep it open. I never have any oil in my intake or on the butterfly. I don't have issues with the engine using any oil either. So far, it's a great engine. I'm thinking about adding some engine flush before my next oil change. My brother had a Buick with the same engine. His engine coded with the dreaded timing chain issue, and started mis firing. He drove it, after I warned him not to. Big mistake. It threw a rod through the block. That was a dumb move.
Does the valve body have to be programmed
great video my trans stopped working couple weeks ago it moves but wont shift gears it goes 5mph i never do anything with the transmission fluid cause i hear u dont have to do anything to it my q50 has 146k miles i got it wit 80k n it was 2 years old i have a 2015
I have code P0735 on my g35. It shifts fine until i shift into 5th. Is it the valve body?
My valve body went out at 127k miles and I never changed the transmission fluid ever and I’m always stepping on the gas😂
just had that code with p0500 on my 2015 Q70, went to mechanic shop and was told to change the transmission. I'm looking for someone knowledgeable like this guy in NYC area , any suggestions?
How about the code p2857 whats the possible cause ?
So the solution is: Do not buy a vehicle with a Ford 1.6L, 1.5L, 2.0L Got it. Too bad I already have an Escape with a 1.5L at 100k miles and it started throwing blue smoke at startup after an oil change when the garage put in too much oil.. FFS thanks for the non help solution vid
So I have a 2009 g37. I just bought a valve body off of a 2010 g37. Will it need to be reprogrammed ?
Plz lemme know 😭🙏🏼
Did it need to be programmed?
@@jayr8534 I still dk 🤦🏻♂️ have the part but haven’t been able to get a response or any information from anybody
You’ll definitely need to get it reprogrammed. Save your old tcm so they can get the information they need off that one to transfer to the used one
What correlates to a p0008 From your experience that's what I have on my car at the moment
dislike for music😡
reshoot the video w/o junk music
about how much fluid did you use to refill?
i changed mine at 5000 with full syn and mine still did the chain in
Many thanks for the update, when you say a block guard are you referring to shims in the groove, same as the Volvo fix? Thanks again.
I just bought a Chevy 2024 premier blazer. I’ve had it for a little while now and I drive it to work around 8 to 10 miles a day one-way. I pulled it in my garage and change the oil at 2000 miles and that oil came out really black at 2000 miles so believe it or not I will be changing the oil at every 2000 mile intervals I know that’s excessive but I had a 1987 Chevy pick up with a 350 in it throttlebody injection and I changed you on that every 2000 miles, I had the engine for 425,000 miles and I still have the truck today with the same engine no problems and it doesn’t burn oil. I know the engines different than this one but I will be changing the oil just like that I can’t believe how black the oil got 2000 miles if you could use the GM oil monitor in your car all they want you to do is make sure it gets past the warranty and then you’re on your own. Thanks for your video. I’m sorry about the car but this is what I have now thanks again you really explained it well.
Where are you located
If our government wasn’t a mistress of the auto industry it would step up and make Ford replace ALL of these engines so strapped families who put their faith in Ford wouldn’t be stuck in an impossible place. But, this administration is more interested in paying for college loans for students who don’t have the burden of providing for a family like so many owners of Ford cars with this crap design. Come on Biden…..quit supporting potential voters and have the balls to go up against big industries sneering at us consumers as they sell us unsuspecting customers their crap!!
Yes Sir engine flush with every oil change. My 2014 impala gets 2 oil changes a year. Nov & May so I'm ready for winter & summer. My tip is to jack the car up on the driver side about six inches and let it drain for at least 1 hour. Or until you can count to 30 without seeing any oil drip out. The oil drain plug is on the passenger side facing the rear of the car. I drive about 10000 miles a year.
bro i buy 1 from ebay and when i put it i was hard to shift only reverse but i call my mecanic and he tell me that i need to buy a new 1 from nissan no from ebay
What do you recommend if I got a low coast brake solenoid code and my reverse doesent go into gear at times , I have a 3.7 automatic transmission
I have a 2011 Buick Enclave with 184k miles on it. I follow the factory oil change guide (7,500 miles) and infrequently add a ceramic additive. I think changing the oil every 5,000 is a prudent suggestion. I also encourage replacing the PCV valve and breather tubes every 75k miles. Enlarging the breather holes on the PCV valve is strongly encouraged.
My mom has a 2012 chevy traverse. I do the oil changes for her every 5k miles. It has 190k on it now and its running great.
More power to you brother. You are good. God bless
To much junk on the over head cam engines. Chain Tentioners is another issue. I prefer the old single can push rod setup
I have a 2017 escape drinking coolant. Ford should recall those witj this problem I am not alone with this prob.
Your videos are amazing. I really like it. I am a new subscriber to your channel. Can I talk with you Boss Automotive?
No sir those are the input speed sensors, the output speed sensor is on the tail shaft. 9 times out of 10 it's the driver in the TCM that goes out and not the output speed sensor itself.
So what do you need to replace?
@@tlb2345 The whole valve body that the TCM is attached to which is about $1600 - 1700 from the dealer. Stay away from the eBay junk because they really can't be rebuilt. Just did one on my buddies 2017 Armada. Truck is running well now.
The output speed sensor is connect to the valve body wire with metal looking valve. If u get a that code change output speed sensor and the valve body
Reading these comments feel like I’m fucked out of 2k
@@ls1nissanwhere did you bought it from
Timing chain looks like Audi designed it 😂
i did this job but i cant bleed the system. tooo much air... idk what the issue is what do you recommend
Vacuum fill it
Thanks the break down of the cvt. Ive always suspected that the coolers size and efficiency was to blame. Simple parts for them to have their part supplier upgrade. But they choose not to .....to knock you over the head for 8-10k at dealer ship. Id take the the interchiller cooler set up from q50 3.0t and modify for the Maxima and Altimas. And change fluid every 9mos. Amsoil cvt trans fluid as well. Suspect Nissan made fluid to fail suddenly as well lol it
Without even watching this guys Video. Change oil religiously!