He is actually right about the vents. There are 50 total vents on the saleen S7
@evanacorrpv35793 күн бұрын
Hi
@mohammadhassani16144 күн бұрын
Any aux jack recommendations for Toyota Corolla 2010 xle
@TONI5-253 күн бұрын
This is the one I bought:www.amazon.com/86190-02010-Auxiliary-Replacement-Highlander-2007-2015/dp/B07PNG3HL3/ref=sr_1_9?crid=19CUX82N36M3F&keywords=aux%2Binput&qid=1657747141&sprefix=aux%2Binput%2Caps%2C140&sr=8-9&th=1 But it’s unavailable maybe see a similar one with the part number or check if your local autopart store has one
@longwingdetrain31834 күн бұрын
You may say live, and I may be willing to sacrifice my wallet…. But if I do it, my wife is willing to sacrifice my life lmao
@TONI5-254 күн бұрын
There’s only one way to find out 😂😂
@Forthepeople6663 күн бұрын
Two words of advice....new wife....
@TONI5-253 күн бұрын
@@Forthepeople666 💀💀
@thedanbot857 күн бұрын
For future reference, the transmission takes 1.6 to 1.8 quarts of fluid. To make it easier on yourself, you can pull the reverse light switch on the top of the transmission to fill it with 1.6 to 1.8 quarts after you drain it.
@kennylo216310 күн бұрын
@8:01 I think you put the Heater Outlet Hose and the U-shaped hose (both on the Thermostat) on the wrong sides. The one closest to passenger side should go to heater core. And the one towards the water pipe should be connected to the U-shaped hose.
@_7MDMD10 күн бұрын
😂😂😂😂
@Logical-bs1tt11 күн бұрын
😂😂😂
@getflankednub606411 күн бұрын
Why did you not run the orange wire to anything?
@TONI5-2511 күн бұрын
I didn’t need to use it since there was no other wires. It’s just a dimmer switch so it not very important.
@getflankednub606411 күн бұрын
@@TONI5-25 I recently changed mine in a 1999 dodge 1500 and for some reason I’m having an issue where my taillights and dash lights won’t work unless I run the orange and red together. But when I have my truck turned off and have my key turned half way for the radio my fog lights will stay on
@jonathanfranco668012 күн бұрын
How do you know which injectors you need for your car?
@TONI5-2512 күн бұрын
I honestly just rely on the website to tell me if it fits my car. Or you can go to any online part store like O’Reilly’s or RockAuto and check the part numbers.
@winlover3713 күн бұрын
I foolishly thought the fix was needlessly complex and expensive, meanwhile... You are my hero man, thank you for this. No more FM transmitters for me.
@TONI5-2513 күн бұрын
Thanks for the watch. I’m glad my video helped! 👍
@brokenweep560417 күн бұрын
Ffr the struggle
@TONI5-2517 күн бұрын
It’s like the universe is against us 😔
@unknow492817 күн бұрын
15-30k is affordable if you don't have a gf 😅
@TONI5-2517 күн бұрын
You’re not wrong about that 🤣
@RealCult17 күн бұрын
That’s every single time you have to work on your car
@TONI5-2517 күн бұрын
@@RealCult and there’s no avoiding it too lol 🥲🥲
@dudedude670318 күн бұрын
Just recently stripped a bolt and what was supposed to be a quick 5 minute job took me 2 hours to fix
@TONI5-2518 күн бұрын
That’s sucks!! Hope you were able to fix it.
@griffingooch172217 күн бұрын
Just happened to me, drain plug was stripped, had to get a set of nut buster 3000 sockets to break the bitch free
@dudedude670317 күн бұрын
@@TONI5-25Yeah all good now but was a headache
@Logical-bs1tt18 күн бұрын
Happens all the time 🥲
@TONI5-2518 күн бұрын
It feels like you can’t avoid it 😂😂
@Logical-bs1tt17 күн бұрын
@@TONI5-25 tell me about it 🙄
@ricardoaros630519 күн бұрын
Def me 😂
@THAPOKEPINBALLER20 күн бұрын
The car market is trash 15k for an s2000 cmon
@TONI5-2520 күн бұрын
Exactly what I’m saying💀💀..I’m just gonna start low balling for fun
@THAPOKEPINBALLER20 күн бұрын
@@TONI5-25 just say you'll pay full price and then show up with half someone will go for it if they need the money
@ediblecacti20 күн бұрын
Way better than a few months ago
@THAPOKEPINBALLER20 күн бұрын
@@ediblecacti wait until every market crash
@TONI5-2519 күн бұрын
@@THAPOKEPINBALLER I’ll definitely need to try that 😂😂
@Logical-bs1tt20 күн бұрын
😭😭
@jonathancastro384821 күн бұрын
Good video only recommendations I would have would be to split the ball joint much earlier while the control arm bolts are in so there’s no play and u can hit them way harder aswell if ur not changing sway bar links u can disconnect both sides from the control arms and swing the sway bar down instead of unbolting it but great video
@TONI5-2521 күн бұрын
Great tips, I was thinking the same thing when I was editing the video lol
@danielc.236522 күн бұрын
great video, appreciate u bro
@TONI5-2522 күн бұрын
Glad to help, thank you 🙏
@dudedude670322 күн бұрын
I gotta get some ratchet wrenches 😅
@TONI5-2522 күн бұрын
Yeah they definitely help
@Logical-bs1tt22 күн бұрын
Very helpful thank you!
@ThatClappedFa524 күн бұрын
What are the nuts called that are ontop of the airbag bracket to keep the retainers down. I lost mine but dk and can't find them online or the right size nut
@FredoLsi27 күн бұрын
LOVE IT!!! Keep it up taking care of these kseries they love it and they’ll kick vtec like no other and last forever!!
@TONI5-2526 күн бұрын
Thanks for the watch !!🙏
@Brian-bo9nv27 күн бұрын
So you installed new ones? Where did you purchase them.
@TONI5-2527 күн бұрын
They were “new used” bought them off facebook marketplace place, but I recommend just getting new ones on rock auto or Amazon. My door checkers didn’t last very long.
@elmike818427 күн бұрын
just finished watching where did you get your spark plugs?
@TONI5-2527 күн бұрын
Bough the spark plugs off rock auto, and all the fluids I bought them on Amazon.
@TONI5-2527 күн бұрын
Here's the exact ones I got: www.rockauto.com/en/moreinfo.php?pk=393366&cc=1441750&pt=7212&jsn=1
@elmike818427 күн бұрын
man been looking for an updated video like this for a while now and finally, someone did it, keep up the 8th-generation content!
@TONI5-2527 күн бұрын
Glad I could help!! I know there’s hardly any 8th gen content on YT.
@dauntlessdom592627 күн бұрын
Perfect video! Someone told me about switching the chrome part for the black. I was looking for a video that does just that. Where did you order the black grille bar that goes around the emblem?
@TONI5-2527 күн бұрын
Thanks for the watch🙏. I ordered the grille off Amazon here the link: a.co/d/2AbsvH2
@dauntlessdom592626 күн бұрын
@@TONI5-25 I looked at that one. Are you the one that left the review too?
@TONI5-2526 күн бұрын
@@dauntlessdom5926 Yeah Lol!
@dauntlessdom59262 сағат бұрын
@@TONI5-25that’s hilarious. Thank you. I appreciate you clarifying it’s glossy as I hear it can come in a matte texture as well. I’m going to swap my chrome one out for it soon. Perfect tutorial 😁👍
@thesuperscout517828 күн бұрын
what's the setup? for the exhaust and intake?
@TONI5-2528 күн бұрын
All stock in the video. I recently installed a Mishimoto intake, and I have a video for that if you wanna check it out. The car sounds more throaty.
@TONI5-2528 күн бұрын
06-11 Honda Civic Si | Mishimoto Intake Install kzread.info/dash/bejne/n56mzrd9qae6gqQ.html
@McDzy29 күн бұрын
thanks for this vid! Quick question big boss, i tried replacing my steering wheel, my clock spring became undone, i put it back and drives fine, did i break it and would eventually need a new clock spring?
@TONI5-2529 күн бұрын
Thanks for the watch 🫡.If your clock spring works just fine and all your steering button controls and horn work you’re all good and shouldn’t worry.
@McDzy29 күн бұрын
@@TONI5-25 I hope so, im pissed when the cover of the clock spring came off.. i thought i broke it.. so im not sure if it would stay like that
@McDzy29 күн бұрын
my clock spring got undone, can and put it back in and use it as it?? or do i need to get a new one?
@TONI5-2529 күн бұрын
If you put your steering wheel and clock spring back together and try to use your steering controls, horn and turn signals and if everything works fine you’re all good.
@McDzy29 күн бұрын
@@TONI5-25 yeah, all seems to be working good and car drives as it was before.. I hope youre right to big bro
@yukonstriker1703Ай бұрын
Buff those headlights 😢
@TONI5-2528 күн бұрын
lol I would but one of the headlight brackets is broken💀💀 so I’m looking to get new ones
@sendit2873Ай бұрын
when you hit v-tec wtf its not nitrous it is a slow car with a fart can pipe that sounds like a weedeater barely running
@TONI5-25Ай бұрын
That’s offensive to all weedeaters take that back!!
@devantoomey8252Ай бұрын
Thank you!
@TONI5-25Ай бұрын
Happy to help !!
@im_apache5434Ай бұрын
is the rear spring upside down? and does that affect anything
@jcc9thSI191712 күн бұрын
No that's how they are installed. If you see them the other way around it's wrong.
@dropz285Ай бұрын
How old is your civic? I bought mine a while ago and somehow all of the door checks are ruined. I was quoted about 500 dollars to do all of them, thought I would spare the money and do it myself. Mine is a 2010, and everything always looks easy online but seems to be a curse of me when I work on cars. It takes forever to fix anything.
@TONI5-25Ай бұрын
My car is an 08 but these 8th gen civics are starting to show their age. Honestly it’s not a hard jobs just takes a lot of time probably 30-40 min per door.
@haides_princessАй бұрын
THANK! YOU!
@TONI5-25Ай бұрын
Happy to help 👍
@jacexander4271Ай бұрын
Thanks! This helped a lot!
@deryaaktas8140Ай бұрын
I appreciate your video! I have been thinking about getting this fixed for the last two years, but somehow I kept postponing it. Thanks to your video, I did it myself today! Thank you so much!!
@TONI5-25Ай бұрын
Happy to help :)
@adrianlugo1130Ай бұрын
Any aftermarket recommendations? For clock spring?
@TONI5-25Ай бұрын
No idea bro I went with original
@adrianlugo1130Ай бұрын
@@TONI5-25 i found some ij ebay like at 40 to 60 bucks, I think its too cheap might have something
@adrianlugo1130Ай бұрын
Used original ones and aftermarket ones from 20 to 60
@Abe2070Ай бұрын
Did you get the harness from the junk yard ??
@TONI5-25Ай бұрын
I actually go it off a parts car I bought.
@ethanmonjure361Ай бұрын
Think rear spring is upside down
@nikkitipton81002 ай бұрын
That back bracket bolt is a Bitch to get out mines rusted too 😮 cant hardly get my hand back there. Talk about aggravating! Shew.
@TONI5-252 ай бұрын
I know right 😭😭!! Good luck with it 🙌
@Itsayjay232 ай бұрын
Aye bro nice ride
@TONI5-252 ай бұрын
Thank you 🤝
@inertians64522 ай бұрын
Wow that sounds bad lol
@TONI5-252 ай бұрын
Which ?
@yajsemi6712 ай бұрын
Nah
@moidulhassan12 ай бұрын
Thanks for uploading the easiest way to replace bad aux with workable one .millions of all of the world will be benefitted from this video .
@V9Rock2 ай бұрын
Putting an air filter right next to the header = major loss in power.
@TONI5-252 ай бұрын
Hey don't tell me that's how the intake was designed by the engineers at Honda and Mishimoto. Cold air intakes are the way to go, but got this for a steel so couldn't pass is up. Beside my oem filter was filthy and my Si feels so responsive now I can't complain
Пікірлер
Are they repairable
There's a big snail 🐌 in his engine.
A very big one indeed 👀👀
He is actually right about the vents. There are 50 total vents on the saleen S7
Hi
Any aux jack recommendations for Toyota Corolla 2010 xle
This is the one I bought:www.amazon.com/86190-02010-Auxiliary-Replacement-Highlander-2007-2015/dp/B07PNG3HL3/ref=sr_1_9?crid=19CUX82N36M3F&keywords=aux%2Binput&qid=1657747141&sprefix=aux%2Binput%2Caps%2C140&sr=8-9&th=1 But it’s unavailable maybe see a similar one with the part number or check if your local autopart store has one
You may say live, and I may be willing to sacrifice my wallet…. But if I do it, my wife is willing to sacrifice my life lmao
There’s only one way to find out 😂😂
Two words of advice....new wife....
@@Forthepeople666 💀💀
For future reference, the transmission takes 1.6 to 1.8 quarts of fluid. To make it easier on yourself, you can pull the reverse light switch on the top of the transmission to fill it with 1.6 to 1.8 quarts after you drain it.
@8:01 I think you put the Heater Outlet Hose and the U-shaped hose (both on the Thermostat) on the wrong sides. The one closest to passenger side should go to heater core. And the one towards the water pipe should be connected to the U-shaped hose.
😂😂😂😂
😂😂😂
Why did you not run the orange wire to anything?
I didn’t need to use it since there was no other wires. It’s just a dimmer switch so it not very important.
@@TONI5-25 I recently changed mine in a 1999 dodge 1500 and for some reason I’m having an issue where my taillights and dash lights won’t work unless I run the orange and red together. But when I have my truck turned off and have my key turned half way for the radio my fog lights will stay on
How do you know which injectors you need for your car?
I honestly just rely on the website to tell me if it fits my car. Or you can go to any online part store like O’Reilly’s or RockAuto and check the part numbers.
I foolishly thought the fix was needlessly complex and expensive, meanwhile... You are my hero man, thank you for this. No more FM transmitters for me.
Thanks for the watch. I’m glad my video helped! 👍
Ffr the struggle
It’s like the universe is against us 😔
15-30k is affordable if you don't have a gf 😅
You’re not wrong about that 🤣
That’s every single time you have to work on your car
@@RealCult and there’s no avoiding it too lol 🥲🥲
Just recently stripped a bolt and what was supposed to be a quick 5 minute job took me 2 hours to fix
That’s sucks!! Hope you were able to fix it.
Just happened to me, drain plug was stripped, had to get a set of nut buster 3000 sockets to break the bitch free
@@TONI5-25Yeah all good now but was a headache
Happens all the time 🥲
It feels like you can’t avoid it 😂😂
@@TONI5-25 tell me about it 🙄
Def me 😂
The car market is trash 15k for an s2000 cmon
Exactly what I’m saying💀💀..I’m just gonna start low balling for fun
@@TONI5-25 just say you'll pay full price and then show up with half someone will go for it if they need the money
Way better than a few months ago
@@ediblecacti wait until every market crash
@@THAPOKEPINBALLER I’ll definitely need to try that 😂😂
😭😭
Good video only recommendations I would have would be to split the ball joint much earlier while the control arm bolts are in so there’s no play and u can hit them way harder aswell if ur not changing sway bar links u can disconnect both sides from the control arms and swing the sway bar down instead of unbolting it but great video
Great tips, I was thinking the same thing when I was editing the video lol
great video, appreciate u bro
Glad to help, thank you 🙏
I gotta get some ratchet wrenches 😅
Yeah they definitely help
Very helpful thank you!
What are the nuts called that are ontop of the airbag bracket to keep the retainers down. I lost mine but dk and can't find them online or the right size nut
LOVE IT!!! Keep it up taking care of these kseries they love it and they’ll kick vtec like no other and last forever!!
Thanks for the watch !!🙏
So you installed new ones? Where did you purchase them.
They were “new used” bought them off facebook marketplace place, but I recommend just getting new ones on rock auto or Amazon. My door checkers didn’t last very long.
just finished watching where did you get your spark plugs?
Bough the spark plugs off rock auto, and all the fluids I bought them on Amazon.
Here's the exact ones I got: www.rockauto.com/en/moreinfo.php?pk=393366&cc=1441750&pt=7212&jsn=1
man been looking for an updated video like this for a while now and finally, someone did it, keep up the 8th-generation content!
Glad I could help!! I know there’s hardly any 8th gen content on YT.
Perfect video! Someone told me about switching the chrome part for the black. I was looking for a video that does just that. Where did you order the black grille bar that goes around the emblem?
Thanks for the watch🙏. I ordered the grille off Amazon here the link: a.co/d/2AbsvH2
@@TONI5-25 I looked at that one. Are you the one that left the review too?
@@dauntlessdom5926 Yeah Lol!
@@TONI5-25that’s hilarious. Thank you. I appreciate you clarifying it’s glossy as I hear it can come in a matte texture as well. I’m going to swap my chrome one out for it soon. Perfect tutorial 😁👍
what's the setup? for the exhaust and intake?
All stock in the video. I recently installed a Mishimoto intake, and I have a video for that if you wanna check it out. The car sounds more throaty.
06-11 Honda Civic Si | Mishimoto Intake Install kzread.info/dash/bejne/n56mzrd9qae6gqQ.html
thanks for this vid! Quick question big boss, i tried replacing my steering wheel, my clock spring became undone, i put it back and drives fine, did i break it and would eventually need a new clock spring?
Thanks for the watch 🫡.If your clock spring works just fine and all your steering button controls and horn work you’re all good and shouldn’t worry.
@@TONI5-25 I hope so, im pissed when the cover of the clock spring came off.. i thought i broke it.. so im not sure if it would stay like that
my clock spring got undone, can and put it back in and use it as it?? or do i need to get a new one?
If you put your steering wheel and clock spring back together and try to use your steering controls, horn and turn signals and if everything works fine you’re all good.
@@TONI5-25 yeah, all seems to be working good and car drives as it was before.. I hope youre right to big bro
Buff those headlights 😢
lol I would but one of the headlight brackets is broken💀💀 so I’m looking to get new ones
when you hit v-tec wtf its not nitrous it is a slow car with a fart can pipe that sounds like a weedeater barely running
That’s offensive to all weedeaters take that back!!
Thank you!
Happy to help !!
is the rear spring upside down? and does that affect anything
No that's how they are installed. If you see them the other way around it's wrong.
How old is your civic? I bought mine a while ago and somehow all of the door checks are ruined. I was quoted about 500 dollars to do all of them, thought I would spare the money and do it myself. Mine is a 2010, and everything always looks easy online but seems to be a curse of me when I work on cars. It takes forever to fix anything.
My car is an 08 but these 8th gen civics are starting to show their age. Honestly it’s not a hard jobs just takes a lot of time probably 30-40 min per door.
THANK! YOU!
Happy to help 👍
Thanks! This helped a lot!
I appreciate your video! I have been thinking about getting this fixed for the last two years, but somehow I kept postponing it. Thanks to your video, I did it myself today! Thank you so much!!
Happy to help :)
Any aftermarket recommendations? For clock spring?
No idea bro I went with original
@@TONI5-25 i found some ij ebay like at 40 to 60 bucks, I think its too cheap might have something
Used original ones and aftermarket ones from 20 to 60
Did you get the harness from the junk yard ??
I actually go it off a parts car I bought.
Think rear spring is upside down
That back bracket bolt is a Bitch to get out mines rusted too 😮 cant hardly get my hand back there. Talk about aggravating! Shew.
I know right 😭😭!! Good luck with it 🙌
Aye bro nice ride
Thank you 🤝
Wow that sounds bad lol
Which ?
Nah
Thanks for uploading the easiest way to replace bad aux with workable one .millions of all of the world will be benefitted from this video .
Putting an air filter right next to the header = major loss in power.
Hey don't tell me that's how the intake was designed by the engineers at Honda and Mishimoto. Cold air intakes are the way to go, but got this for a steel so couldn't pass is up. Beside my oem filter was filthy and my Si feels so responsive now I can't complain