Пікірлер

• 
  @lnbt15 сағат бұрын

  I spent a few hundreds $ investment ($800+ for me) and get Eufy 3 installed on my house. I am regret and very disappointed it now. At first it is all working great! But after a few months, the software update push, causing all kinds of issues and it is hard to get help/supports from EUFY. I bought the EUFY 3 Security kit and have 4 cameras hook up to it (WIFI) with 4TB SSD on the homebase, and was thinking of adding an additional camera - but not anymore. It ran very well for the first 2-3 months. After that they pushed the update to my homebase (S380), then it become very unstable ever since. I have to reboot my homebase every 30 min. or every few hours if I want to get the history recorded. It's a pain in the butt! Lastly, two days ago, i set my security mode to night time, and the homebase become totally defunct! I could not get it to connect to the network anymore. Tried resetting (as indicated on reddit / eufy tech support website, but nothing is working). Eufy supports only works on M-F (8-4 PST).

• 
  @jack915229 сағат бұрын

  That's awesome. Do you think it'll be better if the battery box just floated with you towing it?

• 
  @cinderkenner8239 сағат бұрын

  Fantastic! This is so helpful, I have a shop vac that doesn't work great as a shop vac already, and probably also have the necessary fittings! Thanks!

• 
  @demonhogo10 сағат бұрын

  how much wattage does that kettle normally use, abot 6-700watts?

• 
  @Doorass-uu8nv11 сағат бұрын

  Wow that looks easy enouph, thanks. What cable will i need to oreder from Amazon for a old windows laptop?

• 
  @LivingInAnInverseReality12 сағат бұрын

  Who do I call to drill holes in my wall

• 
  @greenhillscustomlawncarell113913 сағат бұрын

  That remote acts as a kill switch.

• 
  @barracade24Күн бұрын

  Can you monitor those camera without wifi with the home base?

• 
  @dryanandersonКүн бұрын

  Good video. One tip: this sun shade looks like all corners are the same height. This will cause leaves and debris to collect in the middle. Instead, make one set of diagonal corners higher than the other set. That will make the sail into a parabola shape and nothing will collect on the shade. \

• 
  @russellguthrie9619Күн бұрын

  how often do you change the filter material?

• 
  @TheGabrielStudios2 күн бұрын

  I can’t find out any info about that happens if there is an electrical service blackout and the WiFi goes down, does every individual camera has the 16Gb of memory or you lose the video feed? I know I can use a PC battery backup like with any other system. But it will be good to know what happens

• 
  @BryanDunnMD12 күн бұрын

  Nice video, what 30 amp cord are you using plugged into the anker solix?

• 
  @agr-tech2 күн бұрын

  I spent about $60 in total chemicals last year (e.g. calcium and reducing phosphates). I set my cell to 30% and make sure my pump is set to turn over the water the recommended amount of time per day. That’s it. I have my water tested every 2-3 weeks and 95 % of the time, they say the water is perfect. IMO Saltwater is easy and far less expensive.

• 
  @agr-tech2 күн бұрын

  Commercial chemical chlorine is different than salt generated chlorine and is easier on the skin.

• 
  @MrOntorius2 күн бұрын

  I get buckets for free everyday i have already made multiple filters so i can just switch them out when needed for when i finally get my first fish in the tank

• 
  @ThePaolaDiego2 күн бұрын

  Does it have continuous recording(24/7) or is it just motion detection (events)???

• 
  @IvoryS20122 күн бұрын

  The clear is the worst! I put it on my 18 foot, Intex XTR round pool and it lights so much light in, it created an algae bloom and it took me 2 weeks and its still not completely clear. But it lets in so much sun and traps a lot of heat, my pool stayed at a minimum of 85 degrees daily in North Carolina.

• 
  @supreme84x2 күн бұрын

  Can any of these devices also be hardwired?

• 
  @supreme84x2 күн бұрын

  Can you hard wire the keypad and other security devices??

• 
  @Northstorm_Tom2 күн бұрын

  I love having these Solder shrink wraps In my shop for the few times a year, I solder wires. It would be different if I was using them often. I find that it’s actually encourages me to solder the wires rather than just wrap and use black tape. So while you’re comparing it to our proper soldering, I’m comparing it to a twist and tape. L O L so in my situation, it’s always preferable to use the solder wraps.

• 
  @RahulKhan-ix3rg2 күн бұрын

  How big is your pool ?

• 
  @user-lb1ws4ko5m2 күн бұрын

  Ok got it! Now if you could figure out a way to keep the cover from tearing where cuts are made to accommodate an above ground pool stairs and ramps would be great!

• 
  @jayshad062 күн бұрын

  Very informative thank you !

• 
  @user-idjeic82jdmco13 күн бұрын

  Thank you for demonstrating the delay of pushing notifications. I am also wondering how much the delay, if any, for starting the recording once a motion is detected.

• 
  @michaelborchardt15273 күн бұрын

  By the time these Eufy cams detect and send a notification that someone is at my front door, I would already be dead. I have the wifi ones on more than one network.

• 
  @mervinmassicotte64203 күн бұрын

  Everything works with the camera when it's plug-in with the wifi cable. But when I unplug the cable, the blue light doesn't come on the camera. So I don't know if the camera is working.

• 
  @drakeboutwell71443 күн бұрын

  Does that work on glass too like car windows?

• 
  @tymb2783 күн бұрын

  Advertisement? FULL STOP

• 
  @greatcesarsghost3 күн бұрын

  Where in the app does it say how many times you have discharged it? I have not seen that in the app.

• 
  @user-ic5bh4gp2i3 күн бұрын

  👍👍

• 
  @dude...are-you-sure3 күн бұрын

  So the reason use soldeeseal type is because I can't solder even if my life depended on it. Being able to solder the traditional method takes a lot of practice and experience which I just don't have. I'm sure pros that do this for a living have the skills to solder and make it the best connection possible)e. On the flipside is someone like moi. Who isn't a professional and only need to solder from time to time as need arise. There's no way I can solder like a pro . So solderseals makes it easy for me to tackle these needs that Come up every once in a while.

• 
  @ekasusilo4 күн бұрын

  How many gallon of fish pond is this for 1000 gallon pond pump?

• 
  @nicholasspychalski4 күн бұрын

  The wifi name being Hal, I assume that it comes from the movie 2001: A Space Odyssey.

• 
  @Luigi-Gamez4 күн бұрын

  Do you have a link to your pump?

• 
  @MistyKRUMMEL4 күн бұрын

  How do you keep the fish from going inside the top holes of that filter?

• 
  @enricojaun28804 күн бұрын

  Very good video! I really never wanted to have a pool, but bought a house with one. you covered all the bases. I do like salt over chlorine for all the reasons you mention... I do think about filling it in all the time though!

• 
  @DoItYourselfDad4 күн бұрын

  Glad it was helpful!

• 
  @Borogerst326974 күн бұрын

  and......how often do you have to change the filter media? a bog filter would be better since that never needs changed correct?

• 
  @DoItYourselfDad4 күн бұрын

  I already have a bog, I use this in the spring when the bio’s in the bog are playing catch up.

• 
  @JoelSantosPt4 күн бұрын

  As someone that is going to have their first pool and has a lot of questions about all this stuff, this video is really what I needed. Thank you so much

• 
  @DoItYourselfDad4 күн бұрын

  Thanks! Are you in the building process already?

• 
  @deansynan74244 күн бұрын

  Will the cameras work with the Arlo Base?

• 
  @bkauff005 күн бұрын

  Oversizing the cell is really the key. As someone who worked in the pool industry for a dozen or so years, thank you for this video. So much truth here. People always just thought we were trying to upsell when really we were trying to make their lives easier.

• 
  @DoItYourselfDad5 күн бұрын

  Thanks! Soooooo glad I oversized the cell and the pump.

• 
  @arnoldrodriguez38035 күн бұрын

  So I have 11 zones in my system. My system runs off of a shallow well with a 2 Hp pump. System comes on fine with timer and works great until it reaches zone # 8. At that point pressure drops dramatically in zone #8 and only a small stream comes from one or two of that zones heads. I then go to my well pump and crack the threaded bleeder on top of the impeller housing. air bubbles will then come out and within a minute or two zone #8 will pressurize and come to life. The system will then finish off the remaining watering cycle without a hitch. Next day this same problem will repeat. What might I check in my system? Thanks

• 
  @DoItYourselfDad5 күн бұрын

  That’s really strange, you cracking the bleed on the well pump and getting air?

• 
  @thunderstruck5145 күн бұрын

  What ladder do you have?

• 
  @ronchabale5 күн бұрын

  Have used them a lot, they are very good if you have the space to maneuver your heat source around the connection hovever often you will be using them to repair wires in cramped spaces then they are rubbish. Problem is that too much heat will burn though the plastic tube and getting to heat the rear side is not always possible (example. headlight wiring on cars)

• 
  @Gr8Believer5 күн бұрын

  You didn't show how to gain access to files on \users\xxxx folder. That's what we need to know - Windows7

• 
  @TheRealJWert5 күн бұрын

  Black

• 
  @nykrindfw17435 күн бұрын

  I would like to purchase this but there aren't any little girls living in my area to do the installation. What should I do?

• 
  @eleazarfernandez93695 күн бұрын

  So its ok to mix in a different brand valve ?

• 
  @DoItYourselfDad5 күн бұрын

  Yup, won’t make a difference.

• 
  @eleazarfernandez93695 күн бұрын

  Cause home Depot or Lowe's don't carry the brand I need. And the one I need is triple the price and I was curious if I could just get one similar swap it and the system still be able to control it

• 
  @DoItYourselfDad3 күн бұрын

  @@eleazarfernandez9369 You'll be fine, they all work the same way. Just make sure the pipe diameter and spacing is the same.

• 
  @eleazarfernandez93693 күн бұрын

  @@DoItYourselfDad sweet, I really appreciate the reply. Now I have no excuse to continue to avoid fixing my sprinklers. Thanks

• 
  @CATANOVA5 күн бұрын

  GOOD JOB 👍

• 
  @DoItYourselfDad5 күн бұрын

  Thanks!

• 
  @systemnotes5 күн бұрын

  Cool idea. Now you got me thinking how to create smaller version for a fountain. Since it already has a submersible pump it’s just a matter of building the filter in a smaller housing.

• 
  @DoItYourselfDad5 күн бұрын

  I actually did exactly that with a small container fountain, uses a plastic food container as the housing.

• 
  @Clouds-su3dc6 күн бұрын

  Cool tip fact: if people have their garage from the outside painted white their inside garage will stay 11 to 17°C/20 to 30°F cooler automatically compared to a darker colour garage because white is a great reflector of the sunlight that reflects 80 to 90% of sunlight meanwhile darker colours absorb more heat radiating it everywhere making it hotter and that something they are not going to want in hot climates so they need to go with white garages instead. On the other hand if they are in colder climates where they get mostly winter, then a darker colour or black coloured garage would be more acceptable because it absorbs a lot more heat to keep their garage warmer but if they get both summer and winter which basically most of us do then they all should get a colour garage that is between a lighter and darker colour to even out the temperature for all four seasons 👍. Great video by the way 😊