Пікірлер

• 
  @bendtherules0Күн бұрын

  But the alluminum extrusion is actually cheaper by the kg, almost 40-50% cheaper than the filament cost alone.

• 
  @metalcry-cn3fg2 күн бұрын

  Nephew looks married man with no kids to stress him up

• 
  @JohannesRoeder-fr7zw9 күн бұрын

  Is there a file available for the printing of the casing? Just got my first one to work! Great stuff. The fix with the duplicate pins as @gazzl3 mentioned works!

• 
  @ranasingh554410 күн бұрын

  How many volts is the capacitor? cheers

• 
  @MakersMashup10 күн бұрын

  It was 12v or 16v , anything over 12v is generally sufficient

• 
  @ranasingh55449 күн бұрын

  @@MakersMashup cheers

• 
  @AtomicBleach10 күн бұрын

  Why not just use a cheap cooler instead of dealing with insulation?

• 
  @MakersMashup10 күн бұрын

  The foam was considerably cheaper than an equally large cooler. You're absolutely right, could use a cooler to save considerable time.

• 
  @jay697621 күн бұрын

  I am just like all these people in the comments, I was super frustrated I closed prompt your face many times tried to update my drivers, I restarted my computer lol and then I finally found this video. This is such a simple fix I can't believe that I didn't even attempt to think about it. Thank you so so very much!😅

• 
  @ritesha805024 күн бұрын

  my stepper vibrates a lot, i dont know why

• 
  @TBD3.024 күн бұрын

  They're really not that expensive, anywhere from 30 to 50 dollars, it won't break the bank.

• 
  @MakersMashup23 күн бұрын

  100% but if you have the parts and a printer, why buy one?

• 
  @TBD3.023 күн бұрын

  @@MakersMashup Convenience.

• 
  @tranat851527 күн бұрын

  Good job!!

• 
  @nestorvazquezb527727 күн бұрын

  Couple problems, water will not go to the bottom since it mixes with the IPA, and this should remove particulates but not necessarily organic solvents that can be invisible and accumulate overtime (need to doublecheck this). Basically the moment I saw you say that the water will not be in the final mixture because of the decanting I realized I actually have to discard the whole explanation because you have not researched any of this. Sorry but putting advice like this without checking it properly is quite dangerous.

• 
  @KJMcLaws28 күн бұрын

  Somehow I messed up my home offsets mucking around the settings. It got set to -17mm so 0 was printing wayyy to high. Thanks for pointing me in the right direction. (M206 Z0)

• 
  @KomBinator_Yt28 күн бұрын

  Hello. I'm from Poland. I liked your project. Currently working on a vehicle that uses electric skateboard software and controllers. In the first version, the vehicle is controlled by a joystick connected to ESP32, which connects to ESP32 via WIFI. This works very nice! I thought it would be worth the vehicle that was driven using this ESP32-CAM. Could you suggest how to do this? I think that the current look of the code will not be suitable because the vehicle is supposed to appear behind a moving object and the current ESP32-CAM is not moving. It only does this when the object is moving. Stop and follow the object. It won't work for me. thank you for every tip.

• 
  @PeterPan-fl1lpАй бұрын

  Do you have a link for your 3d printed box for the STL file?

• 
  @MakerBees333Ай бұрын

  ❤ “It’s not your fault” Needed to hear that

• 
  @geofrancis2001Ай бұрын

  why have you removed the code from your site?

• 
  @MakersMashupАй бұрын

  Apologies for that, they weren't removed, but we did change website hosting with a new site design. Let me get those files onto the new site and I'll reply here. Thanks for pointing it out!

• 
  @mussydesign7933Ай бұрын

  This is brilliant, PS I'm the paracord guy 😍

• 
  @MakersMashupАй бұрын

  Glad you liked it! If you have some paracord specific 3D models you can't make yourself let me know. I'm always looking for something unique to make.

• 
  @rongriggs4430Ай бұрын

  Can I run 2 sets of wire connectors to the ESP32 board to run 2 separate led strips going in different areas. Yes I will be adding power injection.

• 
  @patrickdzx1513Ай бұрын

  Does the capacitator you installed works as a fade out for the leds when the ESP32 is unplugged from the power? Thanks.

• 
  @MakersMashupАй бұрын

  Its not designed that way but you'll see that if you remove the power. The reason is the stored energy in the capacitor. Its in place to even out the voltage ripples and give a more consistent power supply. When you shut off the power it still has to drain the capacitors power, which is why it "fades out". Additionally this is why you hear never open microwaves or old TV's with large capacitors in them. The energy remains stored until the capacitor is discharged. You should always discharge a capacitor before replacing / removing it. In this case our circuit always drains the capacitor which is the fade out you see.

• 
  @jamescullins2709Ай бұрын

  did they give the R number and value to change it too?

• 
  @ritesha8050Ай бұрын

  where can i find the design

• 
  @meisamghadery2021Ай бұрын

  shit .....

• 
  @aselpanamgama4641Ай бұрын

  Thank you so much for making this content available for everyone sir!!!

• 
  @MultiUser45Ай бұрын

  Очень странная идея, что вода останется в осадке. Вода останется в спирте. После второй такой очистки придется доливать чистый спирт.

• 
  @matteyles7466Ай бұрын

  Would there be anyone out there that could offer a service to help compile and install klipper firmware onto a manta m8p with cb1?

• 
  @MakersMashupАй бұрын

  You could likely find someone in the discord channel to help you.

• 
  @mattphillips538Ай бұрын

  the way you're leaving the cable-tie ends is a cutting hazard

• 
  @MakersMashupАй бұрын

  I like living on the edge

• 
  @mattphillips538Ай бұрын

  @@MakersMashup what about the next guy? :3

• 
  @autofctrlАй бұрын

  A difference might have been easier to spot if there wasn't the infill showing through everywhere...

• 
  @janrdohАй бұрын

  I was about to go and buy connectors for my speaker wires and it was going to be closed barrel, thanks now I will be using open instead.

• 
  @sentinel9046Ай бұрын

  Seems like monitoring the comments and posting video replies to those comments would be harder than posting twice a day. There's a lot of other things to do with your time.

• 
  @greg4367Ай бұрын

  SO... Why don't you include link to the Things page?

• 
  @MakersMashupАй бұрын

  It is, it's in the description.

• 
  @JesusFierro-zp6yw2 ай бұрын

  LETTTTS GOOOOOO THANK YOU SOOO MUCH

• 
  @Prince-vp5hd2 ай бұрын

  Hey, I love this idea and with summer coming up this will definitely be on my list of things to do. I was wondering (since this was posted 4 years ago) if you’ve posted anything else that might have any upgrades or anything that could be more modern if there is such an option with the improvement in tech over these years? :)

• 
  @danielwulf42412 ай бұрын

  The Code of "RunoutAnywhere.ino" does not compile properly because the call to 'HTTPClient::begin' declared with attribute error: obsolete API, use ::begin(WiFiClient,url) leads to an error. The solution is to substitute 'http.begin(String(OCTOPRINT_BASE_URL) + String("/api/job"))' with 'http.begin(client, String(OCTOPRINT_BASE_URL)+ String("/api/job"))', and then the code compiles well. Thank you very much to the Author of the Code for let us participate of her or his work.

• 
  @schilling30032 ай бұрын

  What is the power draw on these? You might be able to but some cheap solar path lights on sale to use as a power source.

• 
  @MakersMashup2 ай бұрын

  I don't remember but I can try and throw it on the bench supply this weekend. I had small solar cells but couldn't get enough power when WiFi kicked in.

• 
  @schilling30032 ай бұрын

  @@MakersMashup yes, but the solar path lights use a battery just like the larger solar panel you showed.

• 
  @MakersMashup2 ай бұрын

  Cool. I'll check it out.

• 
  @christopherlarime40952 ай бұрын

  very cool. Love all these vase mode hacks

• 
  @TheParty20502 ай бұрын

  Hi. I have Pre sonus Erie 5 and the re is no sound coming from speakers. I only hear sound when I plug in headphones. Any solution

• 
  @LuberthDijkman2 ай бұрын

  Flash from Browser kzread.info/dash/bejne/i4CAqaSGY8yYkbQ.html

• 
  @braaitongs2 ай бұрын

  What soldiering iron do you use?

• 
  @MakersMashup2 ай бұрын

  Hakko irons, I have a few. amzn.to/3UaECtb is my bench iron and I've also got a pencil style for mobile applications.

• 
  @braaitongs2 ай бұрын

  I have some ESP 32 dev boards on they way. I am a beginner and using them will be my first time. This looks like an interesting project! I was planning on buying a set of LED strip lights but they are insanely expensive.

• 
  @MakersMashup2 ай бұрын

  They aren't cheap for sure, the DIY approach saves a few bucks compared to buying proprietary controllers. You can also save big sourcing direct from china on Aliexpress, although ship times are 14-45 days in most cases. Huge savings though if you go through the effort.

• 
  @braaitongs2 ай бұрын

  @@MakersMashup ja, my esp 32 dev boards are coming from China. So will take some time go get here. Can a 5v power source that plugs into the esp drive the led strip as well? or are they all higher voltages?

• 
  @razorSH2 ай бұрын

  Just discovered your channel and love it! You make great content.

• 
  @abusam12 ай бұрын

  should I apply air assist when engraving glass?

• 
  @MakersMashup2 ай бұрын

  Yes, you'll still want to blow off any smoke from the tempera or any residual glass grains from the engraving.

• 
  @jessekazemek20332 ай бұрын

  Will this work with Klipper? Going to try anyways. I have the SKR Mini e3 V3. Fingers crossed! Thank you for the great tutorial and STLs!

• 
  @MakersMashup2 ай бұрын

  www.klipper3d.org/Config_Reference.html?h=filament#filament_motion_sensor Is what youre looking for.

• 
  @Grillaaja2 ай бұрын

  Is that capacitor 16 volts? The Amazon link shows a 50 volt capacitor. Do volts matter? (8:25)

• 
  @MakersMashup2 ай бұрын

  50v is fine, the main concern is not having enough volts, 16v is the minimum, the 50v will work just fine.

• 
  @Josivis2 ай бұрын

  How do I use my existing runout sensor that came with my ender3 s1 plus? I wish to add 6 Sharpie colors to the frame, but my spool is in the way. I plan to place it on the side and have my runout sensor as close to the extruder as possible.

• 
  @bigtst362 ай бұрын

  Now do a video on installing it on Klipper.

• 
  @ThatDerpyWolf2 ай бұрын

  I did the same thing, but I didn't vent outside, I just added a carbon filter.

• 
  @gardian17012 ай бұрын

  Pure genius 👌

• 
  @JoeParkerAndThePower2 ай бұрын

  Hi there, great initiative and tidy enclosure setup. I do have a question though: I'm by no means a qualified EE so this is just my reading but.. I understood from guides at RS and others that a properly implemented E-stop should have two functions. The first, which you've implemented here is de-energising the device within a specified time. The second, which is actually important, is making sure resetting the button *doesn't* automatically re-energise the device. This second requirement is trickier to implement and often means relays that directly control the power flowing to travel motors, lasers, etc. Were you aware of this and have you implemented it? Thanks again!

• 
  @MakersMashup2 ай бұрын

  I'm not a qualified EE either, just a dude who wanted to be able to turn off something in a pinch. I think though that the switch itself fulfills the 2nd requirement, at least the one I purchased back then. Once you trip it, you have to turn the switch to re-enable it, you can't just easily press it again to turn it back on. It doesnt flip back on at any point. But to directly answer your question, no, I did not implement additional features beyond what was shown in the video.

• 
  @EricMCS772 ай бұрын

  Thank you for this quick tip... really saved me a lot of time - I used my printers interface to reset the Home Value instead of using PronterFace - it worked out perfectly... the problem I had was that the home position was too forward on the Y. I have a Tevo Tornado and the bolts that secure the bed are not flush but stick up above the surface which was causing the hot end to collide with the bolts-this was happening at the start of each print cycle, but thankfully no more thanks to you. 😎✌

• 
  @Chris_Sims2 ай бұрын

  Dude thank youuuu!!!

• 
  @pennypontillo30512 ай бұрын

  What watt laser are you using