Hello Bryce, thanks for your video. Do you think that we can update the infotainment with the motor of the car started to prevent the need to press the clutch every 15 minutes? Thanks for your help
@j.d.f202 күн бұрын
Any reason why my Mazda recognizes the usb, then when I hit SEARCH it says "No new software packages available"?
@iancayton20793 күн бұрын
any new firmware update?
@BK_BT3 күн бұрын
@@iancayton2079 I’m not sure. I haven’t had my Mazda for 3 years now. Sorry.
@ding-dingsupperclub14724 күн бұрын
Bryce Thomas, you magnificent dude! I spent the better part of an evening researching this, and then I found you, and your hosted Google Drive. 4 years later, you thoroughly helped me. Following your walkthrough, I got my system upgraded in maybe 30 minutes. Sir, Thank you. You made my world a better place this morning.
@mylesc16 күн бұрын
Cool build, I’ve got the same frame and love it!
@TBlake-yf2sr6 күн бұрын
I just updated to 74.00.324A last night with no problems.
@yaegerist-z9z6 күн бұрын
My mazda 3 2014 carplay starts to randomly shut off if im driving longer than 30 minutes. Has anyone had this issue and found a fix?
@csbarbourv7 күн бұрын
Are you supposed to use flexible ducting for furnace and water heater exhaust?
@BK_BT7 күн бұрын
@@csbarbourv Probably not haha. House had a full inspection before I bought it so I guess it passed
@ThepDenNgoaiBien7 күн бұрын
You can use BRAKE CLEANER to clean the zerks and parts before and after pump the fresh grease that way keep them clean and look nice ( If customers check your work then you are doing good job) kk Good luck!!
@walterdonach30357 күн бұрын
I didn't know of this three years ago. Mazda wanted sbout $600 or $695 to update and upgrade to carplay, for my '18 CX 9, got them to update for around $85, then installed the carplay unit, around $200 and two hours time. I just did this update on my daughters' '16 CX5, worked flawlessly. Now to do the hardware upgrade, I have seen that for around $100. good youtube tutorials for that also!
@Archie10218 күн бұрын
Thank you!!
@MatsGarage9 күн бұрын
Thank you for this detailed instruction. Do you know where I can find the EU compatible files?
@jakeweedman84529 күн бұрын
this should work for the 2016 Scion iA, right??
@joeldeleon145310 күн бұрын
Does it works for Mazda 3 2015 HB?
@robinsonlogan10 күн бұрын
Really appreciate this video, manufacturer of the USB ports sent me zero instructions but this made it easy
@nerocomful11 күн бұрын
This was super helpful! Thank you so much! I used this in conjunction with Flyin’ Miata’s backup cam install video, which has about 90% of the same trim removal steps: kzread.info/dash/bejne/c4mjuZibc7W3fag.htmlsi=idOYnyrr0-mAS_Pj
@robcrawford516512 күн бұрын
Worked perfectly! thank you!
@jackleonp14 күн бұрын
Hi Bryce Is still good for 2015 Mazda 6 Touring?
@megatrolltrollington15 күн бұрын
As someone with a hardwired, blendmount mounted V1 and homelink, i can report that all the buttons are completely usable 😂
@megatrolltrollington15 күн бұрын
Oh yeah, i also have the exact same viofo dashcam. Shout out vortexradar! Edit: the type c port is for a rear cam
@benjaminsturdy271820 күн бұрын
Hi there, I followed all the instructions but now there is appears to be constant low level speaker hiss/ white noise. Can anyone help me on where I might have gone wrong?
@stephantimmermans610722 күн бұрын
Did you disconnected the battery before hardware installation?
@alvaroperez636626 күн бұрын
a thousand thanks for you!!!!
@micahbell853326 күн бұрын
Do you have any experience with stainless steel bottles? I've been looking at Bivo in particular. Plastic always seems to have that problem of smells and tastes sticking around a little longer than they should, especially when I put some sort of electrolyte mix in there.
@KhadkaPrabesh-s3g27 күн бұрын
Does anyone know if the update works in australia??
@scaredyet12 күн бұрын
I want to know too
@YeseniaValois27 күн бұрын
Hello, my screen is all black and it has been like that for a few hours and the car already turned off so I am worried. Is there anyway to repair this because I think it bricked my system
@isaachann274029 күн бұрын
How much were these and would you say they are worth it?
@KdmergeАй бұрын
Thanks Bryce - This worked great - I now have Apple Car Play in my 2016.5 Mazda CX-5 - I wish I knew this was a thing years ago.
@JohnMaurofxАй бұрын
Do you guys Now why under safety and vehicule is not showing anything anymore? Under safety it was the option to enable the smart break assistance
@rodneylw10Ай бұрын
Bryce, quick question, Have you noticed the new module with the USB C? I have a 2019 model without CarPlay.
@BK_BTАй бұрын
Hey man! I’ve heard a lot about it but I sold my ND2 quite a while ago. I wish I could help.
@ShadowRing0219Ай бұрын
Thank you
@takondwamsosa5657Ай бұрын
Managed to update my software from 56 Japan version to 70 NA in my 2016 Mazda CX3 which I imported from Japan. The Japan version did not have an option to change the language to English but this version is already in English. Thanks for the help and support
@iamAshmitKumar22 күн бұрын
Would you be able to help me out?
@abdulrahmandhuАй бұрын
Hello everyone! I have seen the files is only for North America,, is there any files regarding Asia or the rest of the world?
@jojotheroboАй бұрын
Not all heroes wear capes.
@Gamniuk_Ай бұрын
all you need to do is copy the firmware file to a flash drive and run the update in the car??
@friendlydropbear8828Ай бұрын
Anyone know where i can get the files to update from v 27? I can't use the North American version... Need versions for Australia.
@javimontes1Ай бұрын
The 70.00.335C Google Drive Folder works for Chile?
@seamaster_007Ай бұрын
Your amazon link to the retrofit now shows a P3 and P3.2 (the latter being wireless carplay and wireless android). Would you say these would be safe to install assuming we do the latest firmware install as indicated? I'd rather take advantage of the wireless (no wire upgrade) if it indeed works on the 2016 MX5 ND1
@jeffylube31Ай бұрын
@Bryce Thomas, have you tried any the wireless android auto or apple car play modules and it work?
@thepooreman5965Ай бұрын
Hi, thanks for the info and walkthrough. Does anybody have any information on where I can find the EU compatible firmware for the Mazda 6?
@Skate2revАй бұрын
The idea for stuff like back to black is to use it before your trim fades.
@alialami9886Ай бұрын
I tried and it work. June 2024. Many thanks.
@NyceUAАй бұрын
Thanks for the video Bryce, and especially for providing files in the description!
@DannyD_LiveАй бұрын
does this NA firmware include Canada as well? will it work with a 2015 Mazda 3?
@raven_themechanicАй бұрын
It would mostly change it to North America
@blakekirby3042Ай бұрын
Hey I’m sure your video works for some but I tried doing all the steps you did and it never go to the update bar only to preparing to update screen for an hour and a half. My current version was 53 and I was using the correct Fat32 usb but I had to turn the car on to keep the battery alive and it never went past the screen. My head unit is now bricked so please all be careful im going to be paying a lot to fix this I’m sure
@marcoalfredo1989Ай бұрын
Fatto, se qualcuno avesse bisogno del montaggio sono a Napoli.
@LuisNova18Ай бұрын
Hi guys, I have the version 59.xx but Japan edition, I can do update to this version ?
@raven_themechanicАй бұрын
Yes but you'll be changing it to North America
@scottamy6496Ай бұрын
I just changed the oil and installed a Fumoto valve on my 2024 ND3 Miata Club at 850 miles and also went with the Pennzoil Ultra Platinum 5w30! I live in North Carolina and didn’t feel comfortable with the 0w30 and wanted to go with a little heavier weight of oil for my area and our heat!
@vunley2 ай бұрын
Need to give you props. Following your instructions, I was able to install this in less than 2 hours. A+ would buy from again. <3
@winterMB912 ай бұрын
June 1st (2024) still working OMG my heart almost about to Stop when started to prepare for updating the screen completely went black i set one minutes inside didn't show anything then come to my room search on Google its said its okay to go black so after 20 minutes I went to check it was about 95%😅 and at the end was showing to turn off and on the Acc to take the change effect i just turned the fan to high then pressed the ignition once after 2 seconds again and off back after 3 minutes everything was done 👍👍👍 On Mazda 3 GS skyactive 2017
Пікірлер
Hello Bryce, thanks for your video. Do you think that we can update the infotainment with the motor of the car started to prevent the need to press the clutch every 15 minutes? Thanks for your help
Any reason why my Mazda recognizes the usb, then when I hit SEARCH it says "No new software packages available"?
any new firmware update?
@@iancayton2079 I’m not sure. I haven’t had my Mazda for 3 years now. Sorry.
Bryce Thomas, you magnificent dude! I spent the better part of an evening researching this, and then I found you, and your hosted Google Drive. 4 years later, you thoroughly helped me. Following your walkthrough, I got my system upgraded in maybe 30 minutes. Sir, Thank you. You made my world a better place this morning.
Cool build, I’ve got the same frame and love it!
I just updated to 74.00.324A last night with no problems.
My mazda 3 2014 carplay starts to randomly shut off if im driving longer than 30 minutes. Has anyone had this issue and found a fix?
Are you supposed to use flexible ducting for furnace and water heater exhaust?
@@csbarbourv Probably not haha. House had a full inspection before I bought it so I guess it passed
You can use BRAKE CLEANER to clean the zerks and parts before and after pump the fresh grease that way keep them clean and look nice ( If customers check your work then you are doing good job) kk Good luck!!
I didn't know of this three years ago. Mazda wanted sbout $600 or $695 to update and upgrade to carplay, for my '18 CX 9, got them to update for around $85, then installed the carplay unit, around $200 and two hours time. I just did this update on my daughters' '16 CX5, worked flawlessly. Now to do the hardware upgrade, I have seen that for around $100. good youtube tutorials for that also!
Thank you!!
Thank you for this detailed instruction. Do you know where I can find the EU compatible files?
this should work for the 2016 Scion iA, right??
Does it works for Mazda 3 2015 HB?
Really appreciate this video, manufacturer of the USB ports sent me zero instructions but this made it easy
This was super helpful! Thank you so much! I used this in conjunction with Flyin’ Miata’s backup cam install video, which has about 90% of the same trim removal steps: kzread.info/dash/bejne/c4mjuZibc7W3fag.htmlsi=idOYnyrr0-mAS_Pj
Worked perfectly! thank you!
Hi Bryce Is still good for 2015 Mazda 6 Touring?
As someone with a hardwired, blendmount mounted V1 and homelink, i can report that all the buttons are completely usable 😂
Oh yeah, i also have the exact same viofo dashcam. Shout out vortexradar! Edit: the type c port is for a rear cam
Hi there, I followed all the instructions but now there is appears to be constant low level speaker hiss/ white noise. Can anyone help me on where I might have gone wrong?
Did you disconnected the battery before hardware installation?
a thousand thanks for you!!!!
Do you have any experience with stainless steel bottles? I've been looking at Bivo in particular. Plastic always seems to have that problem of smells and tastes sticking around a little longer than they should, especially when I put some sort of electrolyte mix in there.
Does anyone know if the update works in australia??
I want to know too
Hello, my screen is all black and it has been like that for a few hours and the car already turned off so I am worried. Is there anyway to repair this because I think it bricked my system
How much were these and would you say they are worth it?
Thanks Bryce - This worked great - I now have Apple Car Play in my 2016.5 Mazda CX-5 - I wish I knew this was a thing years ago.
Do you guys Now why under safety and vehicule is not showing anything anymore? Under safety it was the option to enable the smart break assistance
Bryce, quick question, Have you noticed the new module with the USB C? I have a 2019 model without CarPlay.
Hey man! I’ve heard a lot about it but I sold my ND2 quite a while ago. I wish I could help.
Thank you
Managed to update my software from 56 Japan version to 70 NA in my 2016 Mazda CX3 which I imported from Japan. The Japan version did not have an option to change the language to English but this version is already in English. Thanks for the help and support
Would you be able to help me out?
Hello everyone! I have seen the files is only for North America,, is there any files regarding Asia or the rest of the world?
Not all heroes wear capes.
all you need to do is copy the firmware file to a flash drive and run the update in the car??
Anyone know where i can get the files to update from v 27? I can't use the North American version... Need versions for Australia.
The 70.00.335C Google Drive Folder works for Chile?
Your amazon link to the retrofit now shows a P3 and P3.2 (the latter being wireless carplay and wireless android). Would you say these would be safe to install assuming we do the latest firmware install as indicated? I'd rather take advantage of the wireless (no wire upgrade) if it indeed works on the 2016 MX5 ND1
@Bryce Thomas, have you tried any the wireless android auto or apple car play modules and it work?
Hi, thanks for the info and walkthrough. Does anybody have any information on where I can find the EU compatible firmware for the Mazda 6?
The idea for stuff like back to black is to use it before your trim fades.
I tried and it work. June 2024. Many thanks.
Thanks for the video Bryce, and especially for providing files in the description!
does this NA firmware include Canada as well? will it work with a 2015 Mazda 3?
It would mostly change it to North America
Hey I’m sure your video works for some but I tried doing all the steps you did and it never go to the update bar only to preparing to update screen for an hour and a half. My current version was 53 and I was using the correct Fat32 usb but I had to turn the car on to keep the battery alive and it never went past the screen. My head unit is now bricked so please all be careful im going to be paying a lot to fix this I’m sure
Fatto, se qualcuno avesse bisogno del montaggio sono a Napoli.
Hi guys, I have the version 59.xx but Japan edition, I can do update to this version ?
Yes but you'll be changing it to North America
I just changed the oil and installed a Fumoto valve on my 2024 ND3 Miata Club at 850 miles and also went with the Pennzoil Ultra Platinum 5w30! I live in North Carolina and didn’t feel comfortable with the 0w30 and wanted to go with a little heavier weight of oil for my area and our heat!
Need to give you props. Following your instructions, I was able to install this in less than 2 hours. A+ would buy from again. <3
June 1st (2024) still working OMG my heart almost about to Stop when started to prepare for updating the screen completely went black i set one minutes inside didn't show anything then come to my room search on Google its said its okay to go black so after 20 minutes I went to check it was about 95%😅 and at the end was showing to turn off and on the Acc to take the change effect i just turned the fan to high then pressed the ignition once after 2 seconds again and off back after 3 minutes everything was done 👍👍👍 On Mazda 3 GS skyactive 2017
Using wireless Bluetooth works even better :)