Just put my double bend links on last night and they are the nicest links I've owned yet. Buttery smooth with no slop just like you said! Can't wait to get it out on the rocks. Thanks for the video and for making awesome products Mazz! 🙌
@percivale65112 күн бұрын
Have you tried these with the RadioMaster MT12 4in1 by chance?
@buzby804 күн бұрын
Cable shortening video still in the works?
@1598hi5 күн бұрын
I was going to go with this until I realized how they designed it with all the screws on the outside of the body. Trying to come up with a high quality, scale look for a pretty expensive vanquish build I'm starting. I wonder if I could use the Team Raffee body (same scale look as this but higher quality) and then just buy the fenders from this kit. The Team Raffee body comes with the same terrible fenders as the Injora. Might look into that, like you I want a reasonable scale look. Thanks for the in depth comparison, it really helped.
@gibsonlife5739 күн бұрын
I use high clearance links a lot upside down on the uppers 4 motor clearance especially if you're using like the Acres motor mount and kicks that motor way down in and then if you got an angled skin on top of that I love that ideal killer job bro
@gibsonlife5739 күн бұрын
I use your Lynx all the time to tune stuff especially the straight ones and I will turn them out to turns on each end they have taken significant Falls and never broke
@gibsonlife5739 күн бұрын
I don't know who you're fooling dude I'm my hands are harder than woodpecker lips and I have trouble putting them bastards on their so strong that's why I love them though cuz they're that damn going strong that beefy man sometimes you do need to set of tools just to put them together
@gibsonlife5739 күн бұрын
I got another question for you how long are you willing to make them double bins would you be willing to go past Gladiator Mike let's say 8284 would you be willing to offer custom sets like that say just in 2 mm increments
@gibsonlife5739 күн бұрын
If I got a hundred I may even possibly have 200 of the damn phone rod ends I have so many are links and ain't funny bro they are definitely my favorite from a manufacturer now I also build my own links sometimes too but I love the design of yours being the solid Rod Big Boy threads in the best rod ends on the market
@gibsonlife5739 күн бұрын
Honestly I probably got a sandwich bag halfway full of your links bro definitely need a straight links up front cuz the way I think about it is this if you got that high clearance leak right in your front tire goes up and over and then lays into that pocket on that high clearance link it can really get stuck right there if you got a straight link it keeps the truck lifted a little bit and keeps the tire on the ground up top watch your able to get pulled up a little bit further and helps pull you right into the skid plate and write up and over this is definitely going to place your chassis bro at the top of the lineup with the best there is in my personal opinion your chassis has always been in that lineup
@gibsonlife5739 күн бұрын
I just said this last night the night before maybe even the day prior when I first filled the rig and tested it and I said he needs double bent links people need to understand like right there at the rear of the skid when you finally hit that break over and you're over it the first thing you come in contact with is those links if you don't have that double pen it's going to cause a problem so thankful buddy that you got these coming
@24Yepp9 күн бұрын
Sup boys
@isaiah93139 күн бұрын
Damn I just realized I'm probably gonna miss out 🥲 7pm eastern is 1am for me me unfortunately. Womp womp
@GNCRC10 күн бұрын
I can’t wait to try a set! 🔥🔥🔥
@maxwellwills181610 күн бұрын
Can't wait to order a set and hopefully a xl chassis 🎉🎉❤
@scottlocosa_rc_nz042010 күн бұрын
🔥🔥🔥
@GNCRC10 күн бұрын
Yo Scott from New Zealand! 👊🏽
@bcochener10 күн бұрын
Awesome sauce!
@hpnc8110 күн бұрын
The best links ever! Takes a bit more effort and it makes a world of difference!
@MrsRabbit810 күн бұрын
I may need to get another. 😊 I got the XL, but the standard length would be nice too, and I've got a few rigs with stock chassis' that need an overhaul! Also definitely getting a couple sets of these links.
@johnnyhotshoe129210 күн бұрын
I missed the V3 C.C. I am hoping for a restock shortly!
@mazzdesigns692910 күн бұрын
Tomorrow at 7pm est!
@johnnyhotshoe129210 күн бұрын
Thank you
@maxwellwills181610 күн бұрын
930pm!!!! Coooome on Mazz! Thats like midnight to me! Jk can't wait ❤
@mazzdesigns692910 күн бұрын
@@maxwellwills1816😂
@Southcoast_rc15 күн бұрын
would you recommend these or the 50mm for the cheat code v3?
@hpnc8125 күн бұрын
Yea boi!
@hpnc8125 күн бұрын
Such a great tutorial!
@Kpilato_2126 күн бұрын
🔥🤙🏻
@HEAGames26 күн бұрын
What do I do if I have the stinger combo with the stick esc and battery’s where do I put the lizard, stick esc,and battery ?
@user-ji8ls9dr9f27 күн бұрын
Building a “carbon fiber” injora lcg . Thanks!
@user-ji8ls9dr9f27 күн бұрын
Raw wires can look good, but it gets janky if you have to redo it. Every weird kink from the last time you hid the trash shows up.
@user-ji8ls9dr9f27 күн бұрын
Tight as could be. She said lol I’m gonna use this on all my builds. Super nice, and simple
@user-ji8ls9dr9f27 күн бұрын
Clean work!
@bcochener29 күн бұрын
Baller paint job! Love the ROP peaking through!!! Killer!
@Danielxperez14Ай бұрын
Is the crawler in the back on that chassis? And what wheels and tires does it have, I live how it sits
@4x4fabricationАй бұрын
was starting to get frustrated with binding😂 thankyou, you are very informative🙌🏻
@lindeleasleyАй бұрын
I prefer PETG over PLA for the same reason you do. It works outside and in my full sized vehicles. I'm also putting a XJ body together for my SCX-10. I've been watching your videos on that, and thanks for making them.
@slidingsidewaysrc91376Ай бұрын
Definitely need a set brother!
@badideang7334Ай бұрын
Big thanks to you from Thailand! I really love the internet
@SmoovD2 ай бұрын
I have your mazz designs links and im very confused on how they go into the skid. These links in the video are a different brand so its not much help
@kitchen4152 ай бұрын
Tires?
@jonnyjaywalk2 ай бұрын
Yo mazz, just thinking as a precaution, you could lay a layer of foil or plastic wrap on top of the car before you place the second mangers on top. So the shoe goo will not be able to make contact with anything other than the body the magnets and the plastic wrap or foil. Just a thought
@2blackfox12 ай бұрын
Spectacular course
@braddahdussifyoumuss5962 ай бұрын
Man my receiver just shuts off whenever it gets a little hot 🤷🏼♂️ took heat shrink off and still shuts off
@4scaleRC2 ай бұрын
That’s wild
@billygraham25872 ай бұрын
I want to try this chassis. How would it be in the xl with the cbolt links? I'm asking because I already ordered the links. Guess i could get the gladiators seperate.
@bigdumbdad22263 ай бұрын
You can put a bit of heat shrink on your clips to cushion them.
@bestpokerrakeback3 ай бұрын
great video, thanks for sharing ... will a Flysky GT3 (AFHDS2A) 2CH transmitter work with this receiver? thanks :)
Пікірлер
Just put my double bend links on last night and they are the nicest links I've owned yet. Buttery smooth with no slop just like you said! Can't wait to get it out on the rocks. Thanks for the video and for making awesome products Mazz! 🙌
Have you tried these with the RadioMaster MT12 4in1 by chance?
Cable shortening video still in the works?
I was going to go with this until I realized how they designed it with all the screws on the outside of the body. Trying to come up with a high quality, scale look for a pretty expensive vanquish build I'm starting. I wonder if I could use the Team Raffee body (same scale look as this but higher quality) and then just buy the fenders from this kit. The Team Raffee body comes with the same terrible fenders as the Injora. Might look into that, like you I want a reasonable scale look. Thanks for the in depth comparison, it really helped.
I use high clearance links a lot upside down on the uppers 4 motor clearance especially if you're using like the Acres motor mount and kicks that motor way down in and then if you got an angled skin on top of that I love that ideal killer job bro
I use your Lynx all the time to tune stuff especially the straight ones and I will turn them out to turns on each end they have taken significant Falls and never broke
I don't know who you're fooling dude I'm my hands are harder than woodpecker lips and I have trouble putting them bastards on their so strong that's why I love them though cuz they're that damn going strong that beefy man sometimes you do need to set of tools just to put them together
I got another question for you how long are you willing to make them double bins would you be willing to go past Gladiator Mike let's say 8284 would you be willing to offer custom sets like that say just in 2 mm increments
If I got a hundred I may even possibly have 200 of the damn phone rod ends I have so many are links and ain't funny bro they are definitely my favorite from a manufacturer now I also build my own links sometimes too but I love the design of yours being the solid Rod Big Boy threads in the best rod ends on the market
Honestly I probably got a sandwich bag halfway full of your links bro definitely need a straight links up front cuz the way I think about it is this if you got that high clearance leak right in your front tire goes up and over and then lays into that pocket on that high clearance link it can really get stuck right there if you got a straight link it keeps the truck lifted a little bit and keeps the tire on the ground up top watch your able to get pulled up a little bit further and helps pull you right into the skid plate and write up and over this is definitely going to place your chassis bro at the top of the lineup with the best there is in my personal opinion your chassis has always been in that lineup
I just said this last night the night before maybe even the day prior when I first filled the rig and tested it and I said he needs double bent links people need to understand like right there at the rear of the skid when you finally hit that break over and you're over it the first thing you come in contact with is those links if you don't have that double pen it's going to cause a problem so thankful buddy that you got these coming
Sup boys
Damn I just realized I'm probably gonna miss out 🥲 7pm eastern is 1am for me me unfortunately. Womp womp
I can’t wait to try a set! 🔥🔥🔥
Can't wait to order a set and hopefully a xl chassis 🎉🎉❤
🔥🔥🔥
Yo Scott from New Zealand! 👊🏽
Awesome sauce!
The best links ever! Takes a bit more effort and it makes a world of difference!
I may need to get another. 😊 I got the XL, but the standard length would be nice too, and I've got a few rigs with stock chassis' that need an overhaul! Also definitely getting a couple sets of these links.
I missed the V3 C.C. I am hoping for a restock shortly!
Tomorrow at 7pm est!
Thank you
930pm!!!! Coooome on Mazz! Thats like midnight to me! Jk can't wait ❤
@@maxwellwills1816😂
would you recommend these or the 50mm for the cheat code v3?
Yea boi!
Such a great tutorial!
🔥🤙🏻
What do I do if I have the stinger combo with the stick esc and battery’s where do I put the lizard, stick esc,and battery ?
Building a “carbon fiber” injora lcg . Thanks!
Raw wires can look good, but it gets janky if you have to redo it. Every weird kink from the last time you hid the trash shows up.
Tight as could be. She said lol I’m gonna use this on all my builds. Super nice, and simple
Clean work!
Baller paint job! Love the ROP peaking through!!! Killer!
Is the crawler in the back on that chassis? And what wheels and tires does it have, I live how it sits
was starting to get frustrated with binding😂 thankyou, you are very informative🙌🏻
I prefer PETG over PLA for the same reason you do. It works outside and in my full sized vehicles. I'm also putting a XJ body together for my SCX-10. I've been watching your videos on that, and thanks for making them.
Definitely need a set brother!
Big thanks to you from Thailand! I really love the internet
I have your mazz designs links and im very confused on how they go into the skid. These links in the video are a different brand so its not much help
Tires?
Yo mazz, just thinking as a precaution, you could lay a layer of foil or plastic wrap on top of the car before you place the second mangers on top. So the shoe goo will not be able to make contact with anything other than the body the magnets and the plastic wrap or foil. Just a thought
Spectacular course
Man my receiver just shuts off whenever it gets a little hot 🤷🏼♂️ took heat shrink off and still shuts off
That’s wild
I want to try this chassis. How would it be in the xl with the cbolt links? I'm asking because I already ordered the links. Guess i could get the gladiators seperate.
You can put a bit of heat shrink on your clips to cushion them.
great video, thanks for sharing ... will a Flysky GT3 (AFHDS2A) 2CH transmitter work with this receiver? thanks :)
Thank you
❤