dude, dont want to criticize your audio but we cant make out what you're saying or doing....bye
@abc-ku3rx13 күн бұрын
dji?
@JakeBullit12313 күн бұрын
Yes. That's an older one I just made public for someone who was interested in ground FPV.
@EnglishTurbines19 күн бұрын
Looked like calm before the rain Jakey Boy....🤔😳🇬🇧
@JakeBullit12318 күн бұрын
Yeah, just got out before the heavens opened.
@abc-ku3rx20 күн бұрын
perfect flight jake...think i'd have popped another batt in and got into them clouds...
@JakeBullit12320 күн бұрын
Yes was tempted, but they were very thick and wet looking .
@chippy31020 күн бұрын
awesome flying👌 what motors are you using
@JakeBullit12320 күн бұрын
Emax Eco 2 2004, is have to check the kv , possibly 2000. Thanks.
@JakeBullit12320 күн бұрын
2400kv , just checked.
@blackbirdboy120 күн бұрын
Cracking footage & flying. Loved all that low proximity stuff the best.
@JakeBullit12320 күн бұрын
Thanks, yes getting down low is the best. 🙂
@blackbirdboy120 күн бұрын
@@JakeBullit123 Seeing your footage will spur me on to finish my T1 when I get back from my hols. Now, time for a Sangria. 😃
@JakeBullit12320 күн бұрын
@@blackbirdboy1 it's a great wee plane. You'll like it, I've put bigger motors and props on mine. I'm not k to bothered about endurance.
@blackbirdboy120 күн бұрын
@JakeBullit123 Mine will be stock on 3S for now. Got a few 3S lipo for it and 2x 18650 plus I may make a 21700 3S 4200 for it.
@JakeBullit12320 күн бұрын
@@blackbirdboy1 check those stock motors are properly bolted on. One of my motors fell off mid flight.
@EnglishTurbines22 күн бұрын
Enjoyed the taxing out bit, really adds to the clip. Too often we never see the plane...It appears you've got a fair bit of right Aileron trim during level flight....🤔😳🇬🇧
@JakeBullit12322 күн бұрын
Thanks. Yes I noticed the RA up. That's just the way it trimmed out.
@EnglishTurbines21 күн бұрын
@@JakeBullit123 Maybe it needs a bit of right thrust...?...🤔🤔
@mattyboy4727 күн бұрын
Very nice Jake, sound makes all the difference too. 👌👍
@chrisp3673Ай бұрын
it seems that the CG is too far back. My eagle had the same characteristic. Then i managed to get more weight in the nose and it flew well! Much better than before!
@JakeBullit123Ай бұрын
Thanks, sadly it crashed due to motor failure and is no more.
@EnglishTurbinesАй бұрын
Good job, I preferred just the engine noise though....🤔😏😀🇬🇧
@JakeBullit123Ай бұрын
No pleasing some people. 🙄😁
@EnglishTurbinesАй бұрын
@@JakeBullit123 You got to cater for the majority M8.....lol ..😏😀
@jack78_Ай бұрын
thnx for sharing, what size battery are you running in it
@JakeBullit123Ай бұрын
My buddies plane. I'll ask him next time, cheers.
@abc-ku3rxАй бұрын
cool,defo different...
@JakeBullit123Ай бұрын
It's a good experience.
@EnglishTurbinesАй бұрын
Sound effect is the best bit..lol...🤔😏👍😀😀
@mattyboy47Ай бұрын
Brill Jake, and engine sounds work well! 😎
@JakeBullit123Ай бұрын
Cheers Matty 👍
@EnglishTurbinesАй бұрын
That electric motor sounds great....love how you throttled it back on the low pass. Its so delightful to finally have a day where its not blowing a howling gale, grey and raining eh..? Prop balancer for Christmas, see me after School.....lol...🤔😏😀🇬🇧
@JakeBullit123Ай бұрын
Yes had a good week last week, lots of flying. Don't think the prop is out of balance, maybe the canopy needs securing better, or cut the rest of the windows out?
@blackbirdboy1Ай бұрын
Saved it, right at the end
@JakeBullit123Ай бұрын
Yeah,we all thought he was going to clip the tall grass.
@blackbirdboy1Ай бұрын
Was the landing FPV? I have trouble landing the bloody thing LOS, let alone FPV, lol I do keep saying, WHEN I bust the landing gear again, I'm going to rip them out & the flaps and FIt a FC & INAV plus FPV and hand launch and belly land her.
@JakeBullit123Ай бұрын
Yes, doesn't make a difference if I land FPV or Los,I think I'm chopping the throttle to soon. Someone's I belly land it, I've tried hand launching but it's a bit porky with a 5000 4s in there.
@Mikeylikesit1968Ай бұрын
Freewing
@JakeBullit123Ай бұрын
Thanks,wasnt sure .I`ll change it.
@Stubby02662 ай бұрын
That is why mine is just hanging from my ceiling. A lot of hours of printing and too pretty to see mine end up in pieces.
@JakeBullit1232 ай бұрын
thought it would look better in the air than collecting dust,which it did but only briefly.Thats the way it goes in this hobby,cheers.
@TheLostSquadron2 ай бұрын
I bought an Artillery Sidewinder with an interest in making small parts and eventually printing planes. The more videos I watched, the less interested I got in doing it. BUT! I was prepared to laugh at this video, but that eagle flew way better than I expected and looked super cool in the air! Since we didn't get to see the second time it went it, did it do something similar? Are you sure you lost control and it didn't mush around and stall on downwind turn? I have a foamie Bangood Eagle that flies great but looks terrible. Yours is enough to interest me again. Nice work!
@JakeBullit1232 ай бұрын
Thanks, I learned a bit printing this bird. I probably should have flown higher. I may try the seagull EDF next as it's a smaller build.
@mudpuddle88052 ай бұрын
So many flights end with all control lost. Makes me wonder about modern RC transmitters and receivers. Beautiful model that seemed underpowered but otherwise a good performer.
@JakeBullit1232 ай бұрын
Had plenty of power, and elrs link was good. Possibly flying to slow so didn't have much soldering Aileron authority?
@SomeGuyInSandy2 ай бұрын
200 hours? Man, you need a faster printer.
@JakeBullit1232 ай бұрын
Lw pla likes to print slow. Machine will do 400mm/s
@EnglishTurbines2 ай бұрын
Oh dear, looked a bit directionally unstable Jakey....Ive a couple of printed planes, they look great but feel too heavy and too fragile to risk flying....Kudos for flying Mode 1 m8....🤔😮😏😀
@JakeBullit1232 ай бұрын
It's got a vertical clear perspex fin, maybe I was flying to slow to have ailerons authority? Oh well, shlt happens😁
@EnglishTurbines2 ай бұрын
@@JakeBullit123 Yes, I kept shouting get some height man!!!....Stop twatting around near the ground, get used to it....Too late now...Shame, it looked great in the air....😏🤔
@JakeBullit1232 ай бұрын
@@EnglishTurbines was trying to keep it low for your viewing pleasure😆
@Liithiumbob2 ай бұрын
Nice work. I feel your pain on the print time verses air time. I print a lot of planes and have found the strategic use of fibreglass and carbon makes them a lot more robust.
@JakeBullit1232 ай бұрын
I feel a kevlar skin wouldn`t have protected this bird.TFW.
@flyingrock63812 ай бұрын
sorry to hear about that Jake! know the feeling... bird was looking really good!
@JakeBullit1232 ай бұрын
Thanks,appreciated.Maybe I should have your user name :)
@blackbirdboy12 ай бұрын
Pity, coz it looked mint. That 360 cam view didn't work though. Difficult to gauge perspective.
@JakeBullit1232 ай бұрын
Cheers, was gutted when it crashed. Hey ho.
@ricepuffmc2 ай бұрын
I have a neptune 4 too! It really is a good printer
@JakeBullit1232 ай бұрын
Yes it's a good machine.
@patricehonvault26122 ай бұрын
Hi Jake, I own the Manta and the T1 ranger VTOL. I was surprised during the first takeoff of the Manta, the T1 ranger VTOL is much more stable than the manta in Qloiter mode. Perhaps settings to improve, in all a nice demonstration.
@JakeBullit1232 ай бұрын
Does your Ranger have compass?My version of Manta does not.Maybe that is the difference??
@patricehonvault26122 ай бұрын
@@JakeBullit123 Yes maybe
@EnglishTurbines2 ай бұрын
Can't you find a quieter. Propeller?.....lol....What prop is it btw..?....🤔😏😀
@JakeBullit1232 ай бұрын
I like it loud 😆 just some old 6x4 I had kicking around.
@EnglishTurbines2 ай бұрын
@@JakeBullit123 That the problem using a 5 inch quad motor, decent props of the two blade variety are hard to come by....🤔😳
@abc-ku3rx3 ай бұрын
looks smooth,great LOS flying too!
@JakeBullit1233 ай бұрын
Thanks it is v smooth.Fun plane.
@sw1986chanell3 ай бұрын
What’s the setup inside this wing you have?
@JakeBullit1233 ай бұрын
4s 2600. Cobra 2212 2200kv. No FC, 5.8 video.
@SkyBandit453 ай бұрын
Bad luck about crash,haven't flown mine yet,what mode did you use.
@JakeBullit1233 ай бұрын
Mainly with the gyro on that flight. So fixed now.
@EnglishTurbines3 ай бұрын
Well that flies pretty good, and no prop to cut your hand..Are you going to tell us the spec etc..?..Its sounds super quiet for a twin EDF...🤔😏 You got a flight controller in there?.
@JakeBullit1233 ай бұрын
Not much to say really. It's 2x40mm edfs, with gyro. It's has differential thrust when the gyro is on. I'm using a 2700 4s. It flies great, very smooth and is super quiet. Cheap too.
@blackbirdboy13 ай бұрын
Seen loads of people that love these and fly great. Not sure what I did with mine, but it never flew right. Crashed loads of times, then when I did get it flying it was an absolute pig. Gave the airframe away in the end. Never liked the AR900 too, though I still have that. Its had multiple motors on it. None of which improved it. I did love my S1100 Harrier though. Have a new kit to build if I ever get the time.
@JakeBullit1233 ай бұрын
It's quite CG critical, got to have some reflex built in too. Cheers.
@blackbirdboy13 ай бұрын
Pity about the crash. Nice sounding EDF Wing
@JakeBullit1233 ай бұрын
Yes, my own fault, should have put it down on the previous circuit and gone long. All fixed now.
@blackbirdboy13 ай бұрын
@@JakeBullit123 Yeah, looked an easy fix. Looked it up. An interesting plane. Leeds model shop has been 2 in stock. Not massively expensive either.
@JakeBullit1233 ай бұрын
@@blackbirdboy1 it's certainly different and hide value. Very smooth flyer with the gyro.
@Mikeylikesit19683 ай бұрын
The wing is easy to land, comes in nice and slow. I use a 4s 3300mah in mine
@abc-ku3rx3 ай бұрын
oldie but goodie..
@JakeBullit1233 ай бұрын
Yes, good plane. Flies much better without half ton of hot glue😂
@abc-ku3rx3 ай бұрын
😂@@JakeBullit123
@yeetboy883 ай бұрын
aka: its an air raid siren
@JakeBullit1233 ай бұрын
Yup
@mattyboy473 ай бұрын
Jake, did you try the exhaust choker mod with the 3D print insert?
@JakeBullit1233 ай бұрын
Not yet. Only just become aware of it. Will give it a go, cheers.
@gilbertorochacosta70534 ай бұрын
which battery are you using?
@DavePinnock4 ай бұрын
smaller battery maybe? That's some shiny filament, gloss pla?
@JakeBullit1234 ай бұрын
Amazon basics silk pla.
@DavePinnock4 ай бұрын
@@JakeBullit123 cool thought it must be something like that. I bought 3 or 4 rolls thinking how good it looked before I realised it wasn't nearly as strong as regular pla. The layers don't seem to bond so well
@Bishop-FPV4 ай бұрын
That's pretty cool, bit of tuning and it will get better and better.
@JakeBullit1234 ай бұрын
Thanks. Needs a lighter battery and skirt I think.
@huntermark75885 ай бұрын
Do you happen to know the rpm you're running it at?
@JakeBullit1235 ай бұрын
Not sure. The motor is around 900kv running off a 3 or 4s lipo battery.
Пікірлер
dude, dont want to criticize your audio but we cant make out what you're saying or doing....bye
dji?
Yes. That's an older one I just made public for someone who was interested in ground FPV.
Looked like calm before the rain Jakey Boy....🤔😳🇬🇧
Yeah, just got out before the heavens opened.
perfect flight jake...think i'd have popped another batt in and got into them clouds...
Yes was tempted, but they were very thick and wet looking .
awesome flying👌 what motors are you using
Emax Eco 2 2004, is have to check the kv , possibly 2000. Thanks.
2400kv , just checked.
Cracking footage & flying. Loved all that low proximity stuff the best.
Thanks, yes getting down low is the best. 🙂
@@JakeBullit123 Seeing your footage will spur me on to finish my T1 when I get back from my hols. Now, time for a Sangria. 😃
@@blackbirdboy1 it's a great wee plane. You'll like it, I've put bigger motors and props on mine. I'm not k to bothered about endurance.
@JakeBullit123 Mine will be stock on 3S for now. Got a few 3S lipo for it and 2x 18650 plus I may make a 21700 3S 4200 for it.
@@blackbirdboy1 check those stock motors are properly bolted on. One of my motors fell off mid flight.
Enjoyed the taxing out bit, really adds to the clip. Too often we never see the plane...It appears you've got a fair bit of right Aileron trim during level flight....🤔😳🇬🇧
Thanks. Yes I noticed the RA up. That's just the way it trimmed out.
@@JakeBullit123 Maybe it needs a bit of right thrust...?...🤔🤔
Very nice Jake, sound makes all the difference too. 👌👍
it seems that the CG is too far back. My eagle had the same characteristic. Then i managed to get more weight in the nose and it flew well! Much better than before!
Thanks, sadly it crashed due to motor failure and is no more.
Good job, I preferred just the engine noise though....🤔😏😀🇬🇧
No pleasing some people. 🙄😁
@@JakeBullit123 You got to cater for the majority M8.....lol ..😏😀
thnx for sharing, what size battery are you running in it
My buddies plane. I'll ask him next time, cheers.
cool,defo different...
It's a good experience.
Sound effect is the best bit..lol...🤔😏👍😀😀
Brill Jake, and engine sounds work well! 😎
Cheers Matty 👍
That electric motor sounds great....love how you throttled it back on the low pass. Its so delightful to finally have a day where its not blowing a howling gale, grey and raining eh..? Prop balancer for Christmas, see me after School.....lol...🤔😏😀🇬🇧
Yes had a good week last week, lots of flying. Don't think the prop is out of balance, maybe the canopy needs securing better, or cut the rest of the windows out?
Saved it, right at the end
Yeah,we all thought he was going to clip the tall grass.
Was the landing FPV? I have trouble landing the bloody thing LOS, let alone FPV, lol I do keep saying, WHEN I bust the landing gear again, I'm going to rip them out & the flaps and FIt a FC & INAV plus FPV and hand launch and belly land her.
Yes, doesn't make a difference if I land FPV or Los,I think I'm chopping the throttle to soon. Someone's I belly land it, I've tried hand launching but it's a bit porky with a 5000 4s in there.
Freewing
Thanks,wasnt sure .I`ll change it.
That is why mine is just hanging from my ceiling. A lot of hours of printing and too pretty to see mine end up in pieces.
thought it would look better in the air than collecting dust,which it did but only briefly.Thats the way it goes in this hobby,cheers.
I bought an Artillery Sidewinder with an interest in making small parts and eventually printing planes. The more videos I watched, the less interested I got in doing it. BUT! I was prepared to laugh at this video, but that eagle flew way better than I expected and looked super cool in the air! Since we didn't get to see the second time it went it, did it do something similar? Are you sure you lost control and it didn't mush around and stall on downwind turn? I have a foamie Bangood Eagle that flies great but looks terrible. Yours is enough to interest me again. Nice work!
Thanks, I learned a bit printing this bird. I probably should have flown higher. I may try the seagull EDF next as it's a smaller build.
So many flights end with all control lost. Makes me wonder about modern RC transmitters and receivers. Beautiful model that seemed underpowered but otherwise a good performer.
Had plenty of power, and elrs link was good. Possibly flying to slow so didn't have much soldering Aileron authority?
200 hours? Man, you need a faster printer.
Lw pla likes to print slow. Machine will do 400mm/s
Oh dear, looked a bit directionally unstable Jakey....Ive a couple of printed planes, they look great but feel too heavy and too fragile to risk flying....Kudos for flying Mode 1 m8....🤔😮😏😀
It's got a vertical clear perspex fin, maybe I was flying to slow to have ailerons authority? Oh well, shlt happens😁
@@JakeBullit123 Yes, I kept shouting get some height man!!!....Stop twatting around near the ground, get used to it....Too late now...Shame, it looked great in the air....😏🤔
@@EnglishTurbines was trying to keep it low for your viewing pleasure😆
Nice work. I feel your pain on the print time verses air time. I print a lot of planes and have found the strategic use of fibreglass and carbon makes them a lot more robust.
I feel a kevlar skin wouldn`t have protected this bird.TFW.
sorry to hear about that Jake! know the feeling... bird was looking really good!
Thanks,appreciated.Maybe I should have your user name :)
Pity, coz it looked mint. That 360 cam view didn't work though. Difficult to gauge perspective.
Cheers, was gutted when it crashed. Hey ho.
I have a neptune 4 too! It really is a good printer
Yes it's a good machine.
Hi Jake, I own the Manta and the T1 ranger VTOL. I was surprised during the first takeoff of the Manta, the T1 ranger VTOL is much more stable than the manta in Qloiter mode. Perhaps settings to improve, in all a nice demonstration.
Does your Ranger have compass?My version of Manta does not.Maybe that is the difference??
@@JakeBullit123 Yes maybe
Can't you find a quieter. Propeller?.....lol....What prop is it btw..?....🤔😏😀
I like it loud 😆 just some old 6x4 I had kicking around.
@@JakeBullit123 That the problem using a 5 inch quad motor, decent props of the two blade variety are hard to come by....🤔😳
looks smooth,great LOS flying too!
Thanks it is v smooth.Fun plane.
What’s the setup inside this wing you have?
4s 2600. Cobra 2212 2200kv. No FC, 5.8 video.
Bad luck about crash,haven't flown mine yet,what mode did you use.
Mainly with the gyro on that flight. So fixed now.
Well that flies pretty good, and no prop to cut your hand..Are you going to tell us the spec etc..?..Its sounds super quiet for a twin EDF...🤔😏 You got a flight controller in there?.
Not much to say really. It's 2x40mm edfs, with gyro. It's has differential thrust when the gyro is on. I'm using a 2700 4s. It flies great, very smooth and is super quiet. Cheap too.
Seen loads of people that love these and fly great. Not sure what I did with mine, but it never flew right. Crashed loads of times, then when I did get it flying it was an absolute pig. Gave the airframe away in the end. Never liked the AR900 too, though I still have that. Its had multiple motors on it. None of which improved it. I did love my S1100 Harrier though. Have a new kit to build if I ever get the time.
It's quite CG critical, got to have some reflex built in too. Cheers.
Pity about the crash. Nice sounding EDF Wing
Yes, my own fault, should have put it down on the previous circuit and gone long. All fixed now.
@@JakeBullit123 Yeah, looked an easy fix. Looked it up. An interesting plane. Leeds model shop has been 2 in stock. Not massively expensive either.
@@blackbirdboy1 it's certainly different and hide value. Very smooth flyer with the gyro.
The wing is easy to land, comes in nice and slow. I use a 4s 3300mah in mine
oldie but goodie..
Yes, good plane. Flies much better without half ton of hot glue😂
😂@@JakeBullit123
aka: its an air raid siren
Yup
Jake, did you try the exhaust choker mod with the 3D print insert?
Not yet. Only just become aware of it. Will give it a go, cheers.
which battery are you using?
smaller battery maybe? That's some shiny filament, gloss pla?
Amazon basics silk pla.
@@JakeBullit123 cool thought it must be something like that. I bought 3 or 4 rolls thinking how good it looked before I realised it wasn't nearly as strong as regular pla. The layers don't seem to bond so well
That's pretty cool, bit of tuning and it will get better and better.
Thanks. Needs a lighter battery and skirt I think.
Do you happen to know the rpm you're running it at?
Not sure. The motor is around 900kv running off a 3 or 4s lipo battery.
Rip your neighbours 😂
If they're not deaf now they don't will be .