Woodworking and tools on a budget. Videos will benefit those on a budget with limited space. I invite you to join me on this adventure. I think my wife is calling me, so I will see you next time you visit.
This is one good saw. The reason I bought this miter saw was because of its WEIGHT only 26 pounds. I'm too old to carry a 100 lb. miter. Also, this saw works very well.
@MarriedManWoodworking15 сағат бұрын
Definitely a good saw. Thanks
@W4ABN2 күн бұрын
Just bought this stand and put it together. Thank you.
@pervakk19808 күн бұрын
You are best ! Thank you.
@cecilias61408 күн бұрын
👏🏽👏🏽👍🏽
@JRWalaitis9 күн бұрын
Dude. I read every page of the "instruction" manual and was absolutely clueless on how to put this thing together. I'm only half way through (I think?), but wanted to come here to see how I can venmo you $20. I'm not sure if you're saving me more time or frustration, but no matter what, I'm extremely grateful. Excellent video!
@brianrogers673112 күн бұрын
Best instructional video I've watched in a long time . Thanks for making and posting this
@DustyJ20 күн бұрын
Threw out the instructions, this video gave me everything I needed. Thank you so much for publishing this!
@jakeqwaninne850222 күн бұрын
this is probably not a recomended method ,,,,,,,LOL, that's awesome, you weren't expecting a call from lowes to do advertising rite? lol, i do that too and scarrier, lol
@jakeqwaninne850222 күн бұрын
you're method for determining square requires a board that is square to begin with, i just noticed you didn't point that out, so i did, ,,it drove me nuts butting 2X4 framers that weren't square , and it took a carpenter friend of mine a few secconds to point out that my lumber was kinda twisted and almost all of my framing 2X4 's were like that, now when i do my set up , i use a nice piece of nery square everywhere PVC 5/8 X 3 " trim , it just removes 1 variable in the set up if something does happen to be off a tad
@chadneely563226 күн бұрын
Great video it helped a lot.
@meilyn2229 күн бұрын
Thanks for this video, Rigid didn't put in the washers and bolt for the miter saw brackets to be secured. I am so pissed off because I have to go buy some now. They are worst.
@markboyd262929 күн бұрын
Great video! Appreciate you taking the time!
@dalestallbaumer3822Ай бұрын
Thanks!! Great Video!! Never even had to look at the instructions that came with the stand.
@robertmontgomery3892Ай бұрын
I purchased this saw a couple of years back and it is still unopened but that is about to change. It will be perfect for the deck rebuild that I will start in just over a week. I purchased an Evolution Power Tools Miter Saw Stand Plus and look forward to setting everything up this coming weekend. I caught it on sale at Lowes for some where around $80 likely due to the fact that it was scheduled to be discontinued.
@MHamlin30Ай бұрын
Wow, great video!! Thank you!!!
@alexrudner5548Ай бұрын
Thanks 😊 my friend. Very first video for the purpose and very helpful . Thank you.
@erikmorales8688Ай бұрын
Thank you for this brother you saved me hours of headache
@dean314videos9Ай бұрын
RIDGID instructions was like listening to old people F… thank you for the video. You couldn’t make it any better… BRAVO!!!!
@RickJones222Ай бұрын
Brilliant!
@asiandreamchaserАй бұрын
The instruction manual was the worst one I've ever looked at. I've had easier times reading IKEA instructions. Your video helped me assemble mine. Thank you so much for making this! You and your video are awesome!
@RafaelToscanoAKALovoАй бұрын
Very nice, Thank you for the show... i was wondering what he extra bolts were for...
@BigDuckEnergyTMАй бұрын
Hey just wanted to say thanks - I've had one of these sitting in my garage for a couple years in the box and the instructions were not the best. Your video made short work of the process and I had mine together fast!
@maestro2523Ай бұрын
Hey Maried man...Ya hust saved my hide assembling my stand. Rookie starting out. Thanks man!
@donttrythisathome.2981Ай бұрын
Very beneficial thank you
@gregethomasАй бұрын
Thank you! Got it all set up
@anonymoususer4356Ай бұрын
Excellent video. Thanks for the help.
@KYBlueJediАй бұрын
Thanks you. Lowe's doesn't even have a video or photos showing the conversions. Very shameful.
@dominicsarria-wiley8985Ай бұрын
Dude you saved me a BOATLOAD of time with assembling this. Thank you for making this video man!!!!!!!!! 🎉. Gave you thumbs up and you earned a subscribe from me!
@jonathanzivan1885Ай бұрын
Crazy that Rigid didn’t think to include assembly instructions! Nor make a KZread. Thanks for stepping up!
@jeffcarlson1981Ай бұрын
Thank you so much! Finished getting the rust off and now it's time to paint!
@carolenglish5846Ай бұрын
Can you show me the adjustments you made to make it square
@morokeiboethia67492 ай бұрын
if you set a stop on one side of the blade, dont pin the board with your hand on the other side of the blade. The workpiece on one side of the blade needs to be free of clamp, hand, or stop. Never pin the workpiece on both sides of the blade.
@janetmihalyfi16272 ай бұрын
Thank you! I could not have set this out without your video!
@jfhorselenberg77782 ай бұрын
Thx. ❤😊
@stephenbonin30492 ай бұрын
That cart looks very flimsy.
@MarriedManWoodworking2 ай бұрын
The versatility of the handle makes it seem flimsy but for almost 3 years I have used this hand trick for a variety of items. I have also let others use it when moving boxes, plywood, and even some furniture. I would not recommend it for moving refrigerators but moving boxes or bags of mulch it has been a champ. Thanks for watching and leaving a comment.
@blainebuchanan24912 ай бұрын
Thanks for this! I found this video and didn't even bother opening the instructions.
@fludrbywest38862 ай бұрын
Thank you , ❤
@lisakeough97082 ай бұрын
Love this idea! I don’t really want to store a compound miter saw so prefer to use circular and jig I already own. So this is great!. question: what type glue do you recommend? I’ve tried different brands on other project with no luck. Ty
@funkmanone2 ай бұрын
I really liked this cart until I realized that they failed to include actual rollers. Also the older version has nice supporting feet that drop out from the extending (non) rollers. One step forward two steps back.
@e.d.39932 ай бұрын
great video!
@munnarg2 ай бұрын
This video made it an easy decision to finally purchase this stand. Unfortunately RIDGID decided not to include half of the installation parts in the box, so I’ll have to wait another two weeks to be able to finish putting this together. Great job on the step by step instructions as well as the closeup shots.
@thomassnider42343 ай бұрын
RIDGID should pay for your video. I have seen my share of terrible instructions but the RIDIGD miter saw stand has to be the worst. Many thanks for your video!
@ryanlewis49193 ай бұрын
Thank you thank you thank you
@ryanlewis49193 ай бұрын
Mine did not even come with instructions
@EasyLiving83 ай бұрын
AWESOME VIDEO!!! Thank You so much for doing this EXCELLENT VIDEO and sharing it with us, PLEASE stay healthy and safe out there!
@particleconfig.89353 ай бұрын
so when zeroing it we touch it and the angle changes? In that case I'd suggested the zeroing to happen say like two seconds after, after pressing the button.
@Justin-su4oh3 ай бұрын
I know I'm late to the party but this video was the most helpful thing I have found.Got me to put my stand together asap. Thank you so much
@catfish243 ай бұрын
Great informative video. Thanks for posting.
@RichardDubeau_40ajr2tc3 ай бұрын
I just bought one of these at Home Depot. Pulled it out of the box and went to KZread to get a quick overview. You are an excellent reviewer. You covered everything I wanted to know about first use and a demonstration of loading the nails. You went beyond by showing the issues with addressing the pressure for the nails. I am now going to do some test nails and now that the snow is mostly gone, I am spending the afternoon fixing damage from winter storms. I appreciate you for making this video.
@christ61774 ай бұрын
I appreciate this video. Made it much easier to assemble the stand.
Пікірлер
This is one good saw. The reason I bought this miter saw was because of its WEIGHT only 26 pounds. I'm too old to carry a 100 lb. miter. Also, this saw works very well.
Definitely a good saw. Thanks
Just bought this stand and put it together. Thank you.
You are best ! Thank you.
👏🏽👏🏽👍🏽
Dude. I read every page of the "instruction" manual and was absolutely clueless on how to put this thing together. I'm only half way through (I think?), but wanted to come here to see how I can venmo you $20. I'm not sure if you're saving me more time or frustration, but no matter what, I'm extremely grateful. Excellent video!
Best instructional video I've watched in a long time . Thanks for making and posting this
Threw out the instructions, this video gave me everything I needed. Thank you so much for publishing this!
this is probably not a recomended method ,,,,,,,LOL, that's awesome, you weren't expecting a call from lowes to do advertising rite? lol, i do that too and scarrier, lol
you're method for determining square requires a board that is square to begin with, i just noticed you didn't point that out, so i did, ,,it drove me nuts butting 2X4 framers that weren't square , and it took a carpenter friend of mine a few secconds to point out that my lumber was kinda twisted and almost all of my framing 2X4 's were like that, now when i do my set up , i use a nice piece of nery square everywhere PVC 5/8 X 3 " trim , it just removes 1 variable in the set up if something does happen to be off a tad
Great video it helped a lot.
Thanks for this video, Rigid didn't put in the washers and bolt for the miter saw brackets to be secured. I am so pissed off because I have to go buy some now. They are worst.
Great video! Appreciate you taking the time!
Thanks!! Great Video!! Never even had to look at the instructions that came with the stand.
I purchased this saw a couple of years back and it is still unopened but that is about to change. It will be perfect for the deck rebuild that I will start in just over a week. I purchased an Evolution Power Tools Miter Saw Stand Plus and look forward to setting everything up this coming weekend. I caught it on sale at Lowes for some where around $80 likely due to the fact that it was scheduled to be discontinued.
Wow, great video!! Thank you!!!
Thanks 😊 my friend. Very first video for the purpose and very helpful . Thank you.
Thank you for this brother you saved me hours of headache
RIDGID instructions was like listening to old people F… thank you for the video. You couldn’t make it any better… BRAVO!!!!
Brilliant!
The instruction manual was the worst one I've ever looked at. I've had easier times reading IKEA instructions. Your video helped me assemble mine. Thank you so much for making this! You and your video are awesome!
Very nice, Thank you for the show... i was wondering what he extra bolts were for...
Hey just wanted to say thanks - I've had one of these sitting in my garage for a couple years in the box and the instructions were not the best. Your video made short work of the process and I had mine together fast!
Hey Maried man...Ya hust saved my hide assembling my stand. Rookie starting out. Thanks man!
Very beneficial thank you
Thank you! Got it all set up
Excellent video. Thanks for the help.
Thanks you. Lowe's doesn't even have a video or photos showing the conversions. Very shameful.
Dude you saved me a BOATLOAD of time with assembling this. Thank you for making this video man!!!!!!!!! 🎉. Gave you thumbs up and you earned a subscribe from me!
Crazy that Rigid didn’t think to include assembly instructions! Nor make a KZread. Thanks for stepping up!
Thank you so much! Finished getting the rust off and now it's time to paint!
Can you show me the adjustments you made to make it square
if you set a stop on one side of the blade, dont pin the board with your hand on the other side of the blade. The workpiece on one side of the blade needs to be free of clamp, hand, or stop. Never pin the workpiece on both sides of the blade.
Thank you! I could not have set this out without your video!
Thx. ❤😊
That cart looks very flimsy.
The versatility of the handle makes it seem flimsy but for almost 3 years I have used this hand trick for a variety of items. I have also let others use it when moving boxes, plywood, and even some furniture. I would not recommend it for moving refrigerators but moving boxes or bags of mulch it has been a champ. Thanks for watching and leaving a comment.
Thanks for this! I found this video and didn't even bother opening the instructions.
Thank you , ❤
Love this idea! I don’t really want to store a compound miter saw so prefer to use circular and jig I already own. So this is great!. question: what type glue do you recommend? I’ve tried different brands on other project with no luck. Ty
I really liked this cart until I realized that they failed to include actual rollers. Also the older version has nice supporting feet that drop out from the extending (non) rollers. One step forward two steps back.
great video!
This video made it an easy decision to finally purchase this stand. Unfortunately RIDGID decided not to include half of the installation parts in the box, so I’ll have to wait another two weeks to be able to finish putting this together. Great job on the step by step instructions as well as the closeup shots.
RIDGID should pay for your video. I have seen my share of terrible instructions but the RIDIGD miter saw stand has to be the worst. Many thanks for your video!
Thank you thank you thank you
Mine did not even come with instructions
AWESOME VIDEO!!! Thank You so much for doing this EXCELLENT VIDEO and sharing it with us, PLEASE stay healthy and safe out there!
so when zeroing it we touch it and the angle changes? In that case I'd suggested the zeroing to happen say like two seconds after, after pressing the button.
I know I'm late to the party but this video was the most helpful thing I have found.Got me to put my stand together asap. Thank you so much
Great informative video. Thanks for posting.
I just bought one of these at Home Depot. Pulled it out of the box and went to KZread to get a quick overview. You are an excellent reviewer. You covered everything I wanted to know about first use and a demonstration of loading the nails. You went beyond by showing the issues with addressing the pressure for the nails. I am now going to do some test nails and now that the snow is mostly gone, I am spending the afternoon fixing damage from winter storms. I appreciate you for making this video.
I appreciate this video. Made it much easier to assemble the stand.