SlickBuys is an electronics repair and modifications shop. Visit my website if you're in need of getting a device of your repaired or modded: www.slickbuysmodsandrepairs.com/
how much weight does this mod add? looks a bit bulky...
@NEKTARIOSZOGKOS5 күн бұрын
piece of cake ... very easy to doit...
@temotemo67458 күн бұрын
what model of ram are u guys using? i cant find one that fots on newegg😊
@chanceharvey317210 күн бұрын
I would pay someone to do this if there was someone local.
@SlickBuysModsandRepairs10 күн бұрын
@@chanceharvey3172 where’re you local to?
@chanceharvey317210 күн бұрын
@@SlickBuysModsandRepairs good ole state of Georgia metro Atlanta.
@jimbobcheezeburger202011 күн бұрын
Can you possibly figure out how to make the steam deck oled have 32gb ram? I know they changed it but just curious since it would be cool to see it upgraded 😎
@SlickBuysModsandRepairs10 күн бұрын
First step would be to buy the higher density chips, which isn't possible.
@gamblerofrats11 күн бұрын
Is there any tangible benefit to manually wiring jumpers rather than using the yellow FPC kit included with some picoflys?
@SlickBuysModsandRepairs11 күн бұрын
@@gamblerofrats good question! I opted for wires with this particular install simply because I didn’t have any of the ribbon cables around.
@huntersteffey963914 күн бұрын
Dude you didnt even turn it off before teardown?
@SlickBuysModsandRepairs14 күн бұрын
@@huntersteffey9639 what difference does it make?
@TheDarkstar82614 күн бұрын
Have you try playing games on performance mode or turbo mode? Anything between 70c to 92c. That's when sd card reader fails. I need more information before do it or send it to RMA.
@SlickBuysModsandRepairs14 күн бұрын
@@TheDarkstar826 users have reported SD card slot failure at the lower end wattages and users have reported no SD card slot failure at the higher end. The issue isn’t heat related.
@TheDarkstar82614 күн бұрын
@@SlickBuysModsandRepairs just asking because I have three Asus Rog Ally at home. They all failed with temperature issue. I noticed the sd card reader write and read speed decrease when the temperature is 70c. 82c or above destroy it self. Technically, I can't play performance mode or turbo mode. I got the video on my channel. I just need your result for my test.
@SlickBuysModsandRepairs14 күн бұрын
@@TheDarkstar826 I personally have ran the Ally solely at 25w/30w with no SD card slot failure problems. Also to explain what you’re seeing, that behavior is seen in most storage mediums. As heat increases transfer speeds decrease. You’d see this with the SSD as well.
@a9udn9u-vanced15 күн бұрын
ROG Ally -> RUGLY Ally
@WaveMaster140617 күн бұрын
Damn bro! Insane!!
@josemanuelpena200617 күн бұрын
What size is the copper cable that you attach to the board?
@GAz0Line18 күн бұрын
how much its gonna cost me and where are you located iam from germany
@SlickBuysModsandRepairs18 күн бұрын
@@GAz0Line America, $275
@GAz0Line18 күн бұрын
@@SlickBuysModsandRepairs thanks for your replay I think it’s gonna be hard for me shipping the device and getting it back The customs here are really pain in the A….
@wikedsuperlinklive20 күн бұрын
Yep definitely getting it pre-installed no way in hell are my soldering skills that good or that precise
@alphaphil535420 күн бұрын
II feel you 😂
@consolemods327121 күн бұрын
very sloppy install complete F-
@SlickBuysModsandRepairs21 күн бұрын
Agreed
@MrAcidburn500023 күн бұрын
Hey Cool video! How much does it cost to send in my device for the mod?
@SlickBuysModsandRepairs23 күн бұрын
$340
@user-ld5wp9ve7c24 күн бұрын
hello, I am from korea. could you accept Oled model ram upgrade and Its audio replacement for windows ? Valve don't support Audio driver in Steamdeck yet . How much Ram could be upgraded is it possible to 64gb ram?
@Mefarious24 күн бұрын
I cant find any one in my country that can upgrade ram.. ;/
@SlickBuysModsandRepairs24 күн бұрын
@@Mefarious shoot me an email. Links in the description.
@hussein971424 күн бұрын
Super Hello my friend, I have an Onexplayer S1 device and suddenly it did not work. I was playing on it, downloading the crack and unofficial programs. What is the cause of the malfunction? Is it from M.2 or a factory defect? I had the device for about 1 year. Plz help me 😢
@TheOnlyTwitchR627 күн бұрын
Removed ram without flux??
@SlickBuysModsandRepairs27 күн бұрын
@@TheOnlyTwitchR6 flux isn’t needed for component removal.
@richgame233127 күн бұрын
U JUST messed up the all console inside yet there is a cleaner way
@SlickBuysModsandRepairs27 күн бұрын
Nothing was "messed up", evident by the booting console at 09:18
@nageswaraopatha544528 күн бұрын
Bro, which is best modded hardware? This one or any other?
@blazercageАй бұрын
Still no ROG Ally 32g ram update from 7 months ago, might of not work I guess.
@TheAmanor123Ай бұрын
Wait so the sd card issue was a QC issue all along? They were saying the heat killed the sd cards completely but its just the reader that was losing connection because of the bad solder points? Would this be a long term solution? I have never used my sd card reader except for testing if it worked or not, i thought it would ruin my sd card lmao
@SlickBuysModsandRepairsАй бұрын
I’m pretty confident it’s the quality of the fuse/solder in the fuse next to the SD card slot IC. Not “heat” killing the SD card.
@rose._.dreamsАй бұрын
what tools do you need?
@teriyakistechАй бұрын
The best to ever do it , i ever get another steam deck i know exactly who im coming to
@academyinself5783Ай бұрын
Το ίδιο θέμα είχε και εμένα ήταν η αντίσταση 3.3v ασφάλεια από την ώρα που ήταν καινούργιο η sd ποτέ δεν διαβάστηκε. Έκανα γεφύρωμα με σύρμα. Και δούλεψε οκ! Το ic είναι σπάνια βλάβη. Το πέρασα θερμοκρασία και αυτό για να είμαι σίγουρος δουλεύει 100% οποίος έχει πρόβλημα 50€ του τοω σε 3 ώρες.
@demislonzie8784Ай бұрын
Nice Mod! what do you do with the leftovers the Case Wifi card and other stuff?
@SlickBuysModsandRepairsАй бұрын
The hardware I just throw into a parts bin. The cases, same thing. I’ve got to put all these spare parts up for sale.
@demislonzie8784Ай бұрын
@@SlickBuysModsandRepairs nice
@Masrik-il9nsАй бұрын
Would've loved to see some benchmarks
@estong2559Ай бұрын
Damn!!! U should sell some of those modded motherboards!
@SlickBuysModsandRepairsАй бұрын
If there’s enough interest sure
@thetaxidermist4495Ай бұрын
@@SlickBuysModsandRepairs I love love to send you a steam deck oled and get it modified
@yodiraxgamingАй бұрын
I agree I would buy one asap
@SlickBuysModsandRepairsАй бұрын
@@yodiraxgaming shoot me an email and we can get the ball rolling.
@TheOnlyTwitchR6Ай бұрын
I hope one day soon the lite gets an oled upgrade available. Thats the ONE thing I desperately want. Also nice job on modding it, basically turned out exactly like mine. Love it Theres something about the Lite form factor that is just awesome.
@GAz0LineАй бұрын
So you only have heat it up ?
@kailashbtw9103Ай бұрын
This was an insane microsoldering job, so cool to see switch hacked like this
@FekimekiАй бұрын
Why stop at 32GB? What if I’m a whale and want 64/128GB RAM upgrade?
@SlickBuysModsandRepairsАй бұрын
I’ve done 64GB before. I don’t believe the 128GB chips can be sourced yet.
@zork219Ай бұрын
It's bad pptc fuses, not controller fault
@SlickBuysModsandRepairsАй бұрын
Correct
@gagemcgrath6907Ай бұрын
Does anyone know where I can find instructions for setting up the files to flash the ram upgrade to bios?
@hobbs120Ай бұрын
How much would it cost to do the same repair on my onexplayer mini pro 6800u
@SlickBuysModsandRepairsАй бұрын
Depends on the exact issue. I think I've sent you an email response already.
@sergiomendoza86043 күн бұрын
do u know the size of the nvme screw by any chance?... i need to replace it. thanx!
@nixonquierre1590Ай бұрын
tried today and it worked. Dont know how long it will last though..
@SlickBuysModsandRepairsАй бұрын
Let me know if it ever stops working again.
@atechcheckАй бұрын
Well it is a fuse after all apparently LOL :D
@XMHX143Ай бұрын
What to do after that how instal games
@adik2213Ай бұрын
Hi will this 2230 ssd overheat ? And did you put the 2242 stock whatever tape that on that lego to your 2230 ssd ?
@SlickBuysModsandRepairsАй бұрын
No and yes
@adik2213Ай бұрын
@@SlickBuysModsandRepairs thanks
@MYDOMAIN002Ай бұрын
Wifi upgrade and ram upgrade parts
@juancarlosticonapinto5965Ай бұрын
Las memorias son de la misma marca?
@noluck8613Ай бұрын
How does it hold up with the heat? Does it run hotter??
@SlickBuysModsandRepairsАй бұрын
It runs cooler
@marcinyt2591Ай бұрын
Hi, What temperature and airflow did you use to solder the RAM? Did you use a preheater?
@SlickBuysModsandRepairsАй бұрын
No preheater. 85% airflow and 500C.
@marcinyt2591Ай бұрын
@@SlickBuysModsandRepairs Thanks!
@marcinyt2591Ай бұрын
@@SlickBuysModsandRepairs How long did it take for the RAM to solder in?
@SlickBuysModsandRepairsАй бұрын
@@marcinyt2591 about 45 minutes
@crapuchgh2277Ай бұрын
hi please i need some help . please can you tell me if it's possible to change ram to 32 gb without removing the bios chip or if there is a way to do the bios part one the rog ally directly if you know what i mean
@SlickBuysModsandRepairsАй бұрын
You can use a pogo adapter
@crapuchgh2277Ай бұрын
@@SlickBuysModsandRepairs thank you so much and please one more thing can you give me a link from where can i buy it please
@_iMANTONАй бұрын
@@SlickBuysModsandRepairshey I would like to have this mod done to my ally also
@Minecraftzocker1352 ай бұрын
Isnt the aluminium shield important for heat transfer ?
@SlickBuysModsandRepairs2 ай бұрын
No, the switch doesn’t generate enough heat for that to be needed.
@Minecraftzocker1352 ай бұрын
Have you bought your modchip from aliexpress or where did you get yours ? I have one ordered from there and it seems on the pictures that it doesnt have the soc cable, but its bought like thousands of times with real looking reviews
@SlickBuysModsandRepairs2 ай бұрын
From eBay. There’s different models with different adapters. They all do the same thing though.
Пікірлер
how much weight does this mod add? looks a bit bulky...
piece of cake ... very easy to doit...
what model of ram are u guys using? i cant find one that fots on newegg😊
I would pay someone to do this if there was someone local.
@@chanceharvey3172 where’re you local to?
@@SlickBuysModsandRepairs good ole state of Georgia metro Atlanta.
Can you possibly figure out how to make the steam deck oled have 32gb ram? I know they changed it but just curious since it would be cool to see it upgraded 😎
First step would be to buy the higher density chips, which isn't possible.
Is there any tangible benefit to manually wiring jumpers rather than using the yellow FPC kit included with some picoflys?
@@gamblerofrats good question! I opted for wires with this particular install simply because I didn’t have any of the ribbon cables around.
Dude you didnt even turn it off before teardown?
@@huntersteffey9639 what difference does it make?
Have you try playing games on performance mode or turbo mode? Anything between 70c to 92c. That's when sd card reader fails. I need more information before do it or send it to RMA.
@@TheDarkstar826 users have reported SD card slot failure at the lower end wattages and users have reported no SD card slot failure at the higher end. The issue isn’t heat related.
@@SlickBuysModsandRepairs just asking because I have three Asus Rog Ally at home. They all failed with temperature issue. I noticed the sd card reader write and read speed decrease when the temperature is 70c. 82c or above destroy it self. Technically, I can't play performance mode or turbo mode. I got the video on my channel. I just need your result for my test.
@@TheDarkstar826 I personally have ran the Ally solely at 25w/30w with no SD card slot failure problems. Also to explain what you’re seeing, that behavior is seen in most storage mediums. As heat increases transfer speeds decrease. You’d see this with the SSD as well.
ROG Ally -> RUGLY Ally
Damn bro! Insane!!
What size is the copper cable that you attach to the board?
how much its gonna cost me and where are you located iam from germany
@@GAz0Line America, $275
@@SlickBuysModsandRepairs thanks for your replay I think it’s gonna be hard for me shipping the device and getting it back The customs here are really pain in the A….
Yep definitely getting it pre-installed no way in hell are my soldering skills that good or that precise
II feel you 😂
very sloppy install complete F-
Agreed
Hey Cool video! How much does it cost to send in my device for the mod?
$340
hello, I am from korea. could you accept Oled model ram upgrade and Its audio replacement for windows ? Valve don't support Audio driver in Steamdeck yet . How much Ram could be upgraded is it possible to 64gb ram?
I cant find any one in my country that can upgrade ram.. ;/
@@Mefarious shoot me an email. Links in the description.
Super Hello my friend, I have an Onexplayer S1 device and suddenly it did not work. I was playing on it, downloading the crack and unofficial programs. What is the cause of the malfunction? Is it from M.2 or a factory defect? I had the device for about 1 year. Plz help me 😢
Removed ram without flux??
@@TheOnlyTwitchR6 flux isn’t needed for component removal.
U JUST messed up the all console inside yet there is a cleaner way
Nothing was "messed up", evident by the booting console at 09:18
Bro, which is best modded hardware? This one or any other?
Still no ROG Ally 32g ram update from 7 months ago, might of not work I guess.
Wait so the sd card issue was a QC issue all along? They were saying the heat killed the sd cards completely but its just the reader that was losing connection because of the bad solder points? Would this be a long term solution? I have never used my sd card reader except for testing if it worked or not, i thought it would ruin my sd card lmao
I’m pretty confident it’s the quality of the fuse/solder in the fuse next to the SD card slot IC. Not “heat” killing the SD card.
what tools do you need?
The best to ever do it , i ever get another steam deck i know exactly who im coming to
Το ίδιο θέμα είχε και εμένα ήταν η αντίσταση 3.3v ασφάλεια από την ώρα που ήταν καινούργιο η sd ποτέ δεν διαβάστηκε. Έκανα γεφύρωμα με σύρμα. Και δούλεψε οκ! Το ic είναι σπάνια βλάβη. Το πέρασα θερμοκρασία και αυτό για να είμαι σίγουρος δουλεύει 100% οποίος έχει πρόβλημα 50€ του τοω σε 3 ώρες.
Nice Mod! what do you do with the leftovers the Case Wifi card and other stuff?
The hardware I just throw into a parts bin. The cases, same thing. I’ve got to put all these spare parts up for sale.
@@SlickBuysModsandRepairs nice
Would've loved to see some benchmarks
Damn!!! U should sell some of those modded motherboards!
If there’s enough interest sure
@@SlickBuysModsandRepairs I love love to send you a steam deck oled and get it modified
I agree I would buy one asap
@@yodiraxgaming shoot me an email and we can get the ball rolling.
I hope one day soon the lite gets an oled upgrade available. Thats the ONE thing I desperately want. Also nice job on modding it, basically turned out exactly like mine. Love it Theres something about the Lite form factor that is just awesome.
So you only have heat it up ?
This was an insane microsoldering job, so cool to see switch hacked like this
Why stop at 32GB? What if I’m a whale and want 64/128GB RAM upgrade?
I’ve done 64GB before. I don’t believe the 128GB chips can be sourced yet.
It's bad pptc fuses, not controller fault
Correct
Does anyone know where I can find instructions for setting up the files to flash the ram upgrade to bios?
How much would it cost to do the same repair on my onexplayer mini pro 6800u
Depends on the exact issue. I think I've sent you an email response already.
do u know the size of the nvme screw by any chance?... i need to replace it. thanx!
tried today and it worked. Dont know how long it will last though..
Let me know if it ever stops working again.
Well it is a fuse after all apparently LOL :D
What to do after that how instal games
Hi will this 2230 ssd overheat ? And did you put the 2242 stock whatever tape that on that lego to your 2230 ssd ?
No and yes
@@SlickBuysModsandRepairs thanks
Wifi upgrade and ram upgrade parts
Las memorias son de la misma marca?
How does it hold up with the heat? Does it run hotter??
It runs cooler
Hi, What temperature and airflow did you use to solder the RAM? Did you use a preheater?
No preheater. 85% airflow and 500C.
@@SlickBuysModsandRepairs Thanks!
@@SlickBuysModsandRepairs How long did it take for the RAM to solder in?
@@marcinyt2591 about 45 minutes
hi please i need some help . please can you tell me if it's possible to change ram to 32 gb without removing the bios chip or if there is a way to do the bios part one the rog ally directly if you know what i mean
You can use a pogo adapter
@@SlickBuysModsandRepairs thank you so much and please one more thing can you give me a link from where can i buy it please
@@SlickBuysModsandRepairshey I would like to have this mod done to my ally also
Isnt the aluminium shield important for heat transfer ?
No, the switch doesn’t generate enough heat for that to be needed.
Have you bought your modchip from aliexpress or where did you get yours ? I have one ordered from there and it seems on the pictures that it doesnt have the soc cable, but its bought like thousands of times with real looking reviews
From eBay. There’s different models with different adapters. They all do the same thing though.
this is so cool
thats not upgrade. its modding.