Пікірлер

• 
  @Reggie-us6rv8 сағат бұрын

  I’m wanting to get one for my cbr600f4 which one do you think I should get for my bike ?

• 
  @bobkurmis534718 сағат бұрын

  Sweet bike all original 👍🏻👍🏻

• 
  @lucha-vc5keКүн бұрын

  hey man could i email u

• 
  @lucha-vc5ke2 күн бұрын

  how big of teeth could u go

• 
  @user-fh7zh5mz3m2 күн бұрын

  Great battery. My daily rider has never started so fast. No charging, no battery tender for 3 months so far.

• 
  @Mr.EeToMyself8 күн бұрын

  What was the old battery?

• 
  @glenv54369 күн бұрын

  Great job! Can you please explain how to remove / replace the clear rubber band around the tanks perimeter? Thanks.

• 
  @HermitFab9 күн бұрын

  Sorry man but This isn’t a gun comparison this is a nozzle size comparison. You even acknowledge this in the video. I was really interested to see if the HTMR gun was worth it but this comparison is pointless. Get the same size nozzle for each gun then it will be a worthwhile review.

• 
  @axisvaporhoningindustries431210 күн бұрын

  The window rinse sure does not cover mutch area

• 
  @HTMR10 күн бұрын

  Chris, thanks for the review! Glad you like the blast gun.

• 
  @agenx_presents13 күн бұрын

  Formosa Jalapeno Hot Sauce is the play!!

• 
  @Chris_Does_Everything13 күн бұрын

  @@agenx_presents we’ll make sure we get that one in there!

• 
  @CHoDE_FaSE_Killa14 күн бұрын

  The fact you didn't add more after first application, makes me contemplate the validity of your tastebuds,.. or should I say tasteDUDS

• 
  @kevinob198314 күн бұрын

  Love the Ireland clock. Also, I like putting franks on a hotdog with Kerry gold

• 
  @NATO71414 күн бұрын

  I put that shhh on everything

• 
  @tommcdonald377222 күн бұрын

  Can I ask what kind of compressor youre using and how the noise is from the compressor?

• 
  @Chris_Does_Everything22 күн бұрын

  I have an Ingersoll Rand Ss5L5 which is a little over 18 CFM. I’m basically right next to the compressor and the noise is loud but reasonable . I say reasonable because prior to this I had a smaller oill free compressor which made a tremendous racket. Honestly, if the IR was on the other end of my shop, it wouldn’t bother me at all.

• 
  @tommcdonald377222 күн бұрын

  @@Chris_Does_Everything Great video! My dewalt pancake compressor sounds like im about to demo a building which is why I ask lol.

• 
  @treeskier80222 күн бұрын

  Such a great review. Makes me want to buy a NA Miata.

• 
  @SeriouslyBadFight25 күн бұрын

  Thanks Chris. The world wouldn’t be the same without authentic reviews like this

• 
  @eugene18826 күн бұрын

  I just checked the website. $500 lol.

• 
  @arpdog29 күн бұрын

  Is this the 4.0 Kaniwaba kit?

• 
  @Chris_Does_Everything28 күн бұрын

  It's a 2.0 kit but the freewheel is likely the same on the new versions.

• 
  @mattwhite-056429 күн бұрын

  Diff bike it’s like a cold air intake equivelant

• 
  @123r2Ай бұрын

  bro said multiple times "deez nuts" knowing perfectly what he was saying

• 
  @dinobat1162Ай бұрын

  id off myself if i had to genuinely pedal like that

• 
  @kylemcneel7876Ай бұрын

  Holy sh*t! Working on a boat motor. This is freaking genius! Harbor freight has a palm nailer for $30. Worth every penny.

• 
  @patricklucki5368Ай бұрын

  How much weight do you have on it including the wheel weights

• 
  @Chris_Does_EverythingАй бұрын

  6 42 pound weights on the back plus 100 pounds of wheel weights give or take is basically 350 pounds. Add another 50 for the weight rack and I’d call it 400.

• 
  @SF-fm7ovАй бұрын

  It’s never a valid comparison when you change more than one thing.

• 
  @navis5284Ай бұрын

  What a shvitz! I don't have time to do all that to replace mine

• 
  @michaelshannon2977Ай бұрын

  Do you keep the heater in the zinc

• 
  @zebrastripes875Ай бұрын

  U can remove it with a 1/4" impact if you have a 3/8" driver bit and put back on with your 3/8" ratchet.

• 
  @mikeyp221Ай бұрын

  I just successfully did this. 1/2” thin wall piece of copper pipe about 3.5” long. Get the seal out, then slip the pipe over the shaft down onto the bearing. Beat down on the pipe with small hammer and the bearing will push down and fall out the bottom. Worked like a charm. Bearing will slide down and be loose on the shaft and then you can work the shaft out at an angle through the bottom.

• 
  @ConstanceGoldsbyАй бұрын

  life saver! for sure

• 
  @Coach_ibbАй бұрын

  Woah, this is ideal! Am I understanding right you can put them on the emotos like Surron, Talaria, eRide Pro etc?

• 
  @HiddenGsАй бұрын

  Does these fit any ebike?

• 
  @mikelortie826Ай бұрын

  Bought for my Yamaha Viking side by side. Lasted less than six months and wouldn’t take a charge. Had bike tested and no electrical problems. Put $110 lawn motor battery and everything is good. Very disappointed in the NoCo battery. Waste of money

• 
  @Mr.EeToMyself9 күн бұрын

  I'd be interested trying one.

• 
  @SunriseSusanYogaАй бұрын

  My Swytch kit is scheduled to arrive next month so I'm watching a lot of install videos. Biking has been my primary transportation mode since the 90s. I do basic maintenance but I've never changed a tire, thanks for taking the time to show the details. I really liked the surprise ending when Sheila rides out of the gray garage into the beautiful green neighborhood.

• 
  @Chris_Does_EverythingАй бұрын

  Good luck, you’ll get it installed in no time! Thanks for watching.

• 
  @pchrisАй бұрын

  How is the top holding up? Any leaking? Have you replaced it again since? That plastic rear-window worries me. Also, where did you buy it?

• 
  @Chris_Does_EverythingАй бұрын

  It’s a Robbins top from Moss Miata. It’s still great, no leaks or issues of any kind. Note that we also have a hard top and don’t drive the car in the winter here in NY.

• 
  @ralfacoppderАй бұрын

  Worked perfect!! Had to remove a gas pedal pin

• 
  @chauvargasАй бұрын

  This works! Punch with a hammer, I was afraid to break the rod with heavy pounding. Plier and pull, ergh no way.

• 
  @williammckinney6702 ай бұрын

  Dude - you're a life saver! Spent literally weeks trying to get a roll pin out of the shift lever of a 1966 T-Bird. Your method had it out in about 20 seconds!

• 
  @matthewoakley60812 ай бұрын

  I have had this a couple of times. I think modern chargers too clever. Simply put on old fashioned charger for a few minutes, or jump with another battery. Then swop back to a lithium charger. I wouldn’t leave them long/or unsupervised though!

• 
  @justmusing25692 ай бұрын

  For the first step (3:15 mark), what current level was set for the preparing the plating solution? I used a quarter amp just as a starting point, but might that be too low? Thanks!

• 
  @justmusing25692 ай бұрын

  Going to try this method out. I like KISS! 60 year old hardware from a well weathered Sunbeam Tiger front suspension. I used Klean-Strip (phosphoric acid based) to remove the last bits of rust after wire brushing as you showed. Otherwise my setup is now the same as in the video. I'll drop a comment on the results in a day or so.

• 
  @ebb24212 ай бұрын

  little clock would draw uA of power, not the issue. the battery will have a BMS circuit trying to keep the batteries in balance, that takes a small amount of power. over time it will drain the battery. there are smart BMS circuits with auto cutoff at 2.5V/cell to protect the battery but maybe not this one. best to charge the battery to 80% every month while in storage/not in use.

• 
  @SDS-12 ай бұрын

  Or.... Just unhook the battery 😅

• 
  @Chris_Does_Everything2 ай бұрын

  Great point! Thanks for watching

• 
  @valerianthemackiii58962 ай бұрын

  BTW - How does it function UP-HILLS? Where we live, we have lots of them, especiallysteep ones. Reply back is appreciated. Great review! 🤓👍 - TY.

• 
  @markcostello94832 ай бұрын

  LiPo batteries in that condition require a special "conditioning" charger. I had something similar happen with an electric motorcycle I had. Standard chargers won't work.

• 
  @Chris_Does_Everything2 ай бұрын

  The Genius 5 charger in recovery mode is supposed to do that. Obviously no good in this case, or not as effective as something designed to do exactly that. Thanks for watching.

• 
  @danielbradford67582 ай бұрын

  do you think this kit would work on a Sur ron Ultra Bee

• 
  @perennialtortilla2 ай бұрын

  A year later and here i am at this same problem with the clutch cover. I am going to take heat to it tomorrow and try and tap it out. If all else fails the dremmel will prevail

• 
  @jamesmallabone13082 ай бұрын

  WOW! So disappointing! 90% of this video is great but the last 2 minutes leaves you with a top that's only partially connected to the frame and hr just blanks out like none of that other stuff exists! 👎

• 
  @outoffashionn2 ай бұрын

  I have a question when you install the bac 4000 do you have to tune the throttle after ?

• 
  @Brock_2732 ай бұрын

  You get the kit eventually and it's really good