one fantastic paint job....thanks so much.......I just bought a MB-C built in 1953 on Saturday
@G.I.JeffsWorkbench3 ай бұрын
It’s great to see these wonderful tools brought back to like new functioning. I’m fortunate to have my late father’s MBF. Thanks for all of the helpful links!
@brianweekley57004 ай бұрын
Great video. I’m disappointed you haven’t posted any videos in 3 years!
@chaostherie6 ай бұрын
Do you have the wiring schematics for 120v wiring. I just got one of these and want to make sure it’s wired correctly. Taking everything apart now
@leohorishny956110 ай бұрын
I assume you’ve seen videos from Northland Workshop on all things Radial Arm Saw, I see the mount in yours that he shows how to make a simple, effective anti-kickback arm to add to this unit which originally had one. I appreciate all you who show how these are disassembled as it helps promote users to tackle those likely ignored or long neglected maintenance tasks.👏🏻
@Tensquaremetreworkshop Жыл бұрын
Given all the advantages of the RAS over the CMS, can you give the reasons you are keeping your CMS?
@renenava84062 жыл бұрын
I have this same saw, trying to remove the motor housing so that I can rewire the motor but I am unable to remove please advice?
@matthewrentz34272 жыл бұрын
How does the back of the motor come off? Have to fix my wires
@danielsteinhart91302 жыл бұрын
Hi, I just got mine, thanks for the video! Wondering, it looks like you had to replace the locating pin. Where did you find that? I need both the miter and bevel knobs.
@markjarman78192 жыл бұрын
Beautiful old girl brought back to life. Real nice.
@miteytuff13 жыл бұрын
Beautiful rebuild. I love this saw. I'm just finishing up my DeWalt RAS. very similar to yours.
@tomshannon99773 жыл бұрын
I'm curious..... Did you strip the old paint. Or just clean it up before repainting. If you just cleaned it..... how did you do that? I'm getting mine cleaner. but, still way too much "Old" crud to repaint Tom
@exmateriawoodworking67333 жыл бұрын
I got rid of the loose stuff and gave it a light scrubbing with a brass wire brush. I didn’t need to remove much, plus I wanted to be conservative because I don’t know what was in that original paint.
@gambit10013 жыл бұрын
Great video! I also have the same saw I picked up locally I need to restore. Where did you find information on the wiring? Mine has terrible wiring that must be replaced as well. Any advice appreciated!
@exmateriawoodworking67333 жыл бұрын
Thanks, Marc. I really wish I had gotten a better photo of the wiring when I finished it. I think there was a post on Lumberjocks that helped, but then the Dewalt RAS group was also had some helpful posts. I'd post a photo on that group to get some advice if I were you. forums.delphiforums.com/woodbutcher
@gambit10013 жыл бұрын
@@exmateriawoodworking6733 thanks so much for the great idea! I'll look into joining there and sharing some pictures!!
@talltimberswoodshop75523 жыл бұрын
I have a couple of these MBFs to restore. And I bought a GE last year which needs work to get it cutting wood again. Nice job.
@jsimpson9953 жыл бұрын
Truly an amazing job. And that invisible hand didn't make any mistakes. I have built every one of my subassemblies multiple times before getting it right.
@stvcolwill3 жыл бұрын
Well done. Just exacerbates my waiting for mine to be shipped. : )
@scrumpynut3 жыл бұрын
Carbide need to buy this off you it is great work
@petertakacs-kiss26583 жыл бұрын
Nice job men! Where did you buy the sticker? I can't find it...
@drudewitt3 жыл бұрын
Good GRIEF!!! This is magical and you are crazy. I can only imagine the work involved in making this. Well done.
@WKYanks3 жыл бұрын
I just refurbed and aligned my 12" (7790 Type 7). You are going to shame me into repainting it. Nice job. I recommend "Mr. Sawdust"'s table. I made one and love it.
@brianweekley57003 жыл бұрын
Nice job and I like the humor in your videos! Also, thanks for including a link to my calibration video in your video description-glad it was useful. Enjoy your saw!
@exmateriawoodworking67333 жыл бұрын
Thanks! I’m checking out your video on the RAS sander now.
@bryanlloyd60243 жыл бұрын
Hello, can you supply the specs of the bearings? I am trying to replace the ones on my GWI. Thanks!
@exmateriawoodworking67333 жыл бұрын
I don’t have the specs off hand, but if you go on the Dewalt RAS forum, they will be happy to help you out.
@cragway3 жыл бұрын
Nice video I've got the mbf also ,mine is dated 1956 ....back when you got American made quality, made to last two lifetimes. I did a restoration recently.A lot of therapeutic work to get it up to snuff. changed out the bearings on the motor,rewired.....replaced the old roller bearings.The table for these really needs to be rock solid flat ,to true it up to the blade.The "Mr Sawdust table"is the one to make.Plan on spending some time getting it dialed in,but once its set up properly ,you'll get very accurate cuts.
@Aeidotronics3 жыл бұрын
Sad I've only ever seen Craftsman versions around me; and none that old.
@flashgordon62383 жыл бұрын
Welcome to the RAS club! Good choice on the paint color... I have a few of the DeWalt RAS, but the MBF is the one I like the most. (I'm on the Delphi forum)
@WKYanks3 жыл бұрын
Nice job man. Looks great!!
@whitestang653 жыл бұрын
Enjoyed the video and the process. Looking forward to more content with the RAS.
@RubyDaGurlАй бұрын
𝕋𝕙𝕚𝕤 𝕨𝕒𝕤 𝕙𝕚𝕤 𝕝𝕒𝕕𝕪 𝕧𝕚𝕕
@latenightswithjeff3 жыл бұрын
Ummm, where do I get my own????? I need it.
@ericjohnson2733 жыл бұрын
So awesome! I’m Wild Heaven’s brewmaster. DM me your address and I’ll mail you beer. Love this
@exmateriawoodworking67333 жыл бұрын
Hi Eric, I just sent you a message on Facebook, since I couldn't send a private DM to you here.
@nickpurdy593 жыл бұрын
Hi, I'm Nick Purdy, co-founder of Wild Heaven, makers of Emergency Drinking Beer. We'd like to commission four of these!! nick at wild heaven beer dot com
@davidslagle65673 жыл бұрын
Very nice.
@charlesreagh53904 жыл бұрын
What color paint did you use?
@exmateriawoodworking67334 жыл бұрын
The paint is Rust-Oleum textured "Sea Green". I included a link in the description.
@jeffbanks19834 жыл бұрын
Nice hat.
@exmateriawoodworking67334 жыл бұрын
I figured you might notice that.
@mauricioochoa55194 жыл бұрын
Man you killed that! Elegant but simple project, perfectly articulated and edited. Well done!
@scottstoner15764 жыл бұрын
Hello Good video. what is the maximum cross cut?
@exmateriawoodworking67334 жыл бұрын
Currently about 13.5”, but I can adjust the fence and get around 15”. That said, Dewalt made much larger saws that will do longer cuts.
@Brit014254 жыл бұрын
Great work and excellent job on the video too.
@mauricioochoa55194 жыл бұрын
Nice job! Looks great, look forward to seeing it in action!
@exmateriawoodworking67334 жыл бұрын
@@mauricioochoa5519 Sounds good -- and you can bring your Festool Domino too!
Пікірлер
one fantastic paint job....thanks so much.......I just bought a MB-C built in 1953 on Saturday
It’s great to see these wonderful tools brought back to like new functioning. I’m fortunate to have my late father’s MBF. Thanks for all of the helpful links!
Great video. I’m disappointed you haven’t posted any videos in 3 years!
Do you have the wiring schematics for 120v wiring. I just got one of these and want to make sure it’s wired correctly. Taking everything apart now
I assume you’ve seen videos from Northland Workshop on all things Radial Arm Saw, I see the mount in yours that he shows how to make a simple, effective anti-kickback arm to add to this unit which originally had one. I appreciate all you who show how these are disassembled as it helps promote users to tackle those likely ignored or long neglected maintenance tasks.👏🏻
Given all the advantages of the RAS over the CMS, can you give the reasons you are keeping your CMS?
I have this same saw, trying to remove the motor housing so that I can rewire the motor but I am unable to remove please advice?
How does the back of the motor come off? Have to fix my wires
Hi, I just got mine, thanks for the video! Wondering, it looks like you had to replace the locating pin. Where did you find that? I need both the miter and bevel knobs.
Beautiful old girl brought back to life. Real nice.
Beautiful rebuild. I love this saw. I'm just finishing up my DeWalt RAS. very similar to yours.
I'm curious..... Did you strip the old paint. Or just clean it up before repainting. If you just cleaned it..... how did you do that? I'm getting mine cleaner. but, still way too much "Old" crud to repaint Tom
I got rid of the loose stuff and gave it a light scrubbing with a brass wire brush. I didn’t need to remove much, plus I wanted to be conservative because I don’t know what was in that original paint.
Great video! I also have the same saw I picked up locally I need to restore. Where did you find information on the wiring? Mine has terrible wiring that must be replaced as well. Any advice appreciated!
Thanks, Marc. I really wish I had gotten a better photo of the wiring when I finished it. I think there was a post on Lumberjocks that helped, but then the Dewalt RAS group was also had some helpful posts. I'd post a photo on that group to get some advice if I were you. forums.delphiforums.com/woodbutcher
@@exmateriawoodworking6733 thanks so much for the great idea! I'll look into joining there and sharing some pictures!!
I have a couple of these MBFs to restore. And I bought a GE last year which needs work to get it cutting wood again. Nice job.
Truly an amazing job. And that invisible hand didn't make any mistakes. I have built every one of my subassemblies multiple times before getting it right.
Well done. Just exacerbates my waiting for mine to be shipped. : )
Carbide need to buy this off you it is great work
Nice job men! Where did you buy the sticker? I can't find it...
Good GRIEF!!! This is magical and you are crazy. I can only imagine the work involved in making this. Well done.
I just refurbed and aligned my 12" (7790 Type 7). You are going to shame me into repainting it. Nice job. I recommend "Mr. Sawdust"'s table. I made one and love it.
Nice job and I like the humor in your videos! Also, thanks for including a link to my calibration video in your video description-glad it was useful. Enjoy your saw!
Thanks! I’m checking out your video on the RAS sander now.
Hello, can you supply the specs of the bearings? I am trying to replace the ones on my GWI. Thanks!
I don’t have the specs off hand, but if you go on the Dewalt RAS forum, they will be happy to help you out.
Nice video I've got the mbf also ,mine is dated 1956 ....back when you got American made quality, made to last two lifetimes. I did a restoration recently.A lot of therapeutic work to get it up to snuff. changed out the bearings on the motor,rewired.....replaced the old roller bearings.The table for these really needs to be rock solid flat ,to true it up to the blade.The "Mr Sawdust table"is the one to make.Plan on spending some time getting it dialed in,but once its set up properly ,you'll get very accurate cuts.
Sad I've only ever seen Craftsman versions around me; and none that old.
Welcome to the RAS club! Good choice on the paint color... I have a few of the DeWalt RAS, but the MBF is the one I like the most. (I'm on the Delphi forum)
Nice job man. Looks great!!
Enjoyed the video and the process. Looking forward to more content with the RAS.
𝕋𝕙𝕚𝕤 𝕨𝕒𝕤 𝕙𝕚𝕤 𝕝𝕒𝕕𝕪 𝕧𝕚𝕕
Ummm, where do I get my own????? I need it.
So awesome! I’m Wild Heaven’s brewmaster. DM me your address and I’ll mail you beer. Love this
Hi Eric, I just sent you a message on Facebook, since I couldn't send a private DM to you here.
Hi, I'm Nick Purdy, co-founder of Wild Heaven, makers of Emergency Drinking Beer. We'd like to commission four of these!! nick at wild heaven beer dot com
Very nice.
What color paint did you use?
The paint is Rust-Oleum textured "Sea Green". I included a link in the description.
Nice hat.
I figured you might notice that.
Man you killed that! Elegant but simple project, perfectly articulated and edited. Well done!
Hello Good video. what is the maximum cross cut?
Currently about 13.5”, but I can adjust the fence and get around 15”. That said, Dewalt made much larger saws that will do longer cuts.
Great work and excellent job on the video too.
Nice job! Looks great, look forward to seeing it in action!
@@mauricioochoa5519 Sounds good -- and you can bring your Festool Domino too!