Пікірлер

• 
  @Mr.nooooo3 күн бұрын

  I have a 92ser sr20det swapped

• 
  @carloseverette64226 күн бұрын

  Im going strong 207 k miles on my 97!!

• 
  @G2GBuilds6 күн бұрын

  @@carloseverette6422 my 99 was around that when I sold it 4 years ago.

• 
  @jesmotorsportfnq14 күн бұрын

  Great to see it on the street again.

• 
  @ady-bdavid117314 күн бұрын

  I know you said this is not a info video. But I'm desperate to know what pistons you used?

• 
  @YABAYURENAULT48 күн бұрын

  Pistones p29 de honda d16 al 40 para que quede en 76mm ya que el std de honda es 75mm

• 
  @ady-bdavid11738 күн бұрын

  @@YABAYURENAULT4 I appreciate your response 🙏🏽🙏🏽🙏🏽

• 
  @wewe-jv7hd15 күн бұрын

  Hello where did you plug in your top o2 sensor to? The headers don’t have a port and the o2 sensor isn’t long enough to reach to the flex pipe

• 
  @G2GBuilds15 күн бұрын

  At 3:57, the new headers show the O2 sensor bung and sensor getting installed. Hope it helps. 👍

• 
  @knight171717 күн бұрын

  what hi comp piston are you using?

• 
  @ov796028 күн бұрын

  👍

• 
  @ronbanks133129 күн бұрын

  You also can take alternate out from where the overflow tank is. Lift the tank the unscrew thectank holder then it comes rite out. And it's realy easy

• 
  @ryanvertulfo4054Ай бұрын

  How much 3:34 would it cost for you to fabricate exhaust turbo manifold. Would love to copy your build

• 
  @G2GBuildsАй бұрын

  Here is the blueprint of how I did it. kzread.info/dash/bejne/g32CpbeweJmYZpc.htmlsi=eZPM13-eDEMfZmyH

• 
  @trnikid2 ай бұрын

  😢

• 
  @woozie_ztfo92852 ай бұрын

  What engine do you recommend swapping in this car?

• 
  @G2GBuilds2 ай бұрын

  You have a few options for engine swap. The most commo are any of the variants of FWD SR20. If you decide to got a bit more crazy, you can do a V6 swap from Nissan Altima or Maxima (VQ35DE). All the above has been already done, or you can turbo the ga16de like I did and have fun!😁

• 
  @de_zire2 ай бұрын

  I've been following you for years now! I have myself a B13 as well. I'm planning to install a turbo (T3/T4 equivalent). I did remember you have a NismoTronic ECU - though, can the stock ECU manage? If not, maybe a smaller turbo would work, just planning for easier spools in the low RPM ranges

• 
  @G2GBuilds2 ай бұрын

  Thanks for your support brother. As soon as you go turbo, it doesn't matter what turbo size, you will need to upgrade injectors and get the car tune.

• 
  @de_zire2 ай бұрын

  @@G2GBuilds pardon me since I really don't know the technicalities of cars. So I can just "plug" the turbo, fit larger injectors, and tune the car accordingly even with stock ECU?

• 
  @G2GBuilds2 ай бұрын

  I believe the stock ga16de cannot be tuned, unless nistune has that option. I'm currently using a Sr20det ECU with a Nismotronic board, but even the Nismotronic support team has been very poorly for the last couple months. If you have the budget, I will highly recommend getting a stand alone ECU.

• 
  @tortron2 ай бұрын

  Wow looks like a good hit😮

• 
  @G2GBuilds2 ай бұрын

  Yeah.

• 
  @2025maleny2 ай бұрын

  😢

• 
  @G35Jeesh2 ай бұрын

  I will cry if someone hits my 1 owner 110k miles now 99 camry

• 
  @G2GBuilds2 ай бұрын

  That's how I felt. I was the 3rd owner brother.

• 
  @drevvyyHD2 ай бұрын

  rip the camry

• 
  @G2GBuilds2 ай бұрын

  😔

• 
  @drevvyyHD2 ай бұрын

  @@G2GBuilds how did it even happen?

• 
  @G2GBuilds2 ай бұрын

  @@drevvyyHD A lady turned left (towards me) when we both had a green light and hit me on the driver side door. I was going straight, which was her fault at the end. Her insurance company paid the minimum for the car repairs. Very disappointed on how the insurance handled the situation, but what matters is that I'm okay. 👍

• 
  @drevvyyHD2 ай бұрын

  @@G2GBuilds cars can be replaces, but lives cannot be replaced

• 
  @G2GBuilds2 ай бұрын

  @@drevvyyHD I agree 100% with you. 🙏

• 
  @JohnDoe-ej1lw2 ай бұрын

  R.I.P. camry 😢 The important thing is that you didn't get hurt bro... 😮 love you man Blessings from Mexico 🇲🇽

• 
  @G2GBuilds2 ай бұрын

  Thanks brother.🙏 Much respect. Greetings from NJ!💪

• 
  @deethree12892 ай бұрын

  Great car! Makes me miss my 94' Camry with the 2.2l, thing was a tank

• 
  @G2GBuilds2 ай бұрын

  I'm joining the club too. I will miss it.

• 
  @therealevh2 ай бұрын

  Can you tell me if you used the altima brake booster? Specifically I'm wanting to use the Cardone 53-2547. Thx brother.

• 
  @G2GBuilds2 ай бұрын

  I'm not sure. I used the booster from the 96 Nissan 200sx SER (Sr20det). I hope this info helps. 👍

• 
  @therealevh2 ай бұрын

  @G2GBuilds Thx. Went with the 91 g20 which was the cheapest of all of them ($75). I'll let you know how it goes.

• 
  @G2GBuilds2 ай бұрын

  @@therealevh awesome. Keep me posted!👍

• 
  @JohnDoe-ej1lw2 ай бұрын

  You are back bro! 😂 welcome...I love your new Apartment 😂.... you love papa! Blessings from Mexico 🇲🇽

• 
  @G2GBuilds2 ай бұрын

  Thanks a lot brother. I see you like my background. 😅 Greetings from NJ. Thanks for the warm welcome.👍

• 
  @fatv2472 ай бұрын

  Joselito where is my sticker

• 
  @G2GBuilds2 ай бұрын

  No stickers at the moment brother. I'm planning on working on the online website, that way anyone can get them shipped to their door. The website should be ready in a few weeks.

• 
  @fatv2472 ай бұрын

  Good job your back my men

• 
  @G2GBuilds2 ай бұрын

  Thanks brother. I'm happy to be back.💪

• 
  @ZRYLLMARCNATHANIELVMICO2 ай бұрын

  Same process in Nissan Sentra B12?

• 
  @G2GBuilds2 ай бұрын

  It should be very similar.

• 
  @fernandoavi23802 ай бұрын

  Papa! Love the video glad to see you back!

• 
  @G2GBuilds2 ай бұрын

  I'm happy to be back. Thanks Papa!💪

• 
  @ady-bdavid11732 ай бұрын

  I've been waiting for your return brother! Looking forward to the new content. I'm also gathering parts to boost my nissan sunny N14 ga16de. LOVE FROM SOUTH AFRICA

• 
  @G2GBuilds2 ай бұрын

  I'm happy to be back brother. Thank you for your support and greetings to everyone. 👍

• 
  @alexsbikesandmotors2 ай бұрын

  It looks pretty fast on acceleration. Definitely faster than my b14 ga16de

• 
  @G2GBuilds2 ай бұрын

  Thank you. I wouldn't say it's the fastest, but it's fun to drive for sure. 💪

• 
  @tortron2 ай бұрын

  Yeah bro, nice to see you and the car back

• 
  @G2GBuilds2 ай бұрын

  I'm happy to be back!🔥 Thanks for the warm welcome!💪

• 
  @1208aa2 ай бұрын

  Glad to see you back bro. Shout out from SF Bay Area California.

• 
  @G2GBuilds2 ай бұрын

  Thanks brother. Shout out from the East Coast!💪

• 
  @jaronbalfour37112 ай бұрын

  Nice bro

• 
  @G2GBuilds2 ай бұрын

  Thank you for the warm welcome! I really appreciate you!👍

• 
  @selectorfox4.0462 ай бұрын

  Hey Bro where do you get your parts from?

• 
  @G2GBuilds2 ай бұрын

  This project had parts from Rockauto.com, eBay.com, local junkyards and Facebook market place.

• 
  @selectorfox4.0462 ай бұрын

  @@G2GBuildsthanks🙌🏾

• 
  @a.k.areacts29503 ай бұрын

  Dope video bro

• 
  @G2GBuilds3 ай бұрын

  Thank you. 👍

• 
  @jergoodchua75143 ай бұрын

  does pink injector compatible? coz they different injector filter

• 
  @G2GBuilds3 ай бұрын

  These worked well for years until I removed them.

• 
  @tobertero21763 ай бұрын

  How do the torsion bars go in the trunk I can’t figure out how to put mine in.

• 
  @G2GBuilds3 ай бұрын

  If you mean a 'sway bar', I have no idea. My Sentra didn't come with one. I'm sure there must be other videos about it.

• 
  @jaronbalfour37113 ай бұрын

  You taking too long to bring back out the car

• 
  @G2GBuilds3 ай бұрын

  The Sentra's ECU stopped working. That's the reason the car hasn't been parked since last year. Currently working on a solution.👍

• 
  @Dif-ob2ty3 ай бұрын

  Como salió este proyecto??

• 
  @G2GBuilds3 ай бұрын

  El proyecto salió excelente. kzread.info/dash/bejne/ommhtciKnqnel8Y.htmlsi=lrnt0rPPjl_8SnU8

• 
  @thr-teamhooliganracing78783 ай бұрын

  Hi, how much hp this has as stock? I mean what version is this, 102hp? How much hp that makes after this build?

• 
  @G2GBuilds2 ай бұрын

  The car stock makes about 110hp from the factory. I have never dyno the car, so I have no idea how much power is making.

• 
  @byron81694 ай бұрын

  Hello ,my nissan sentra is also leaking oil into the spark plug wells, you skipped the part of you installing the o rings into the valve cover 😢😢

• 
  @G2GBuilds4 ай бұрын

  Installing the spark plug seals is super easy. Remove the old ones and install the new ones. When putting back the valve cover, make sure the spark plug seals align well with the spark plug tube area.

• 
  @twistersilvers4 ай бұрын

  Me podrías compartir tus diagramas tengo un b13 y consegui un clúster igual al tuyo estoy confundido por los colores son diferentes no quisiera hacer un corto y dañar mi computadora,o mi clúster

• 
  @G2GBuilds4 ай бұрын

  Que tal amigó? Desearía compartirlos, pero no tengo la información. Ya van más de 3 años desde que hice el trabajo. Otra cosa, cada auto tiene el cableado de diferentes colores. Te deseo éxito. 👍

• 
  @sheldongoulbourne13514 ай бұрын

  I need your help bro I have a right hand nissan b13 where can I find the starter relay

• 
  @G2GBuilds4 ай бұрын

  I believe the relay stated from the USDM car should be the same. I realized that most of the relays from B13 and B14 are almost identical. Double check on rockauto and you may be able to find more information. Best of luck. 👍

• 
  @alerivera66694 ай бұрын

  Hola saludos brother duda con la computadora stock se puede armar un ga16de turbo?

• 
  @G2GBuilds4 ай бұрын

  De que se puede, se puede, pero no es la mejor idea. Recomiendo una computadora programable, o al menos una reprogramación. Éxito.👍

• 
  @alerivera66694 ай бұрын

  Gracias brother es q tengo ese proyectito pero en baja falla y se apaga y pense q era por la computadora pronto buacare una programable mil gracias y exito 😊

• 
  @jordanhunt63864 ай бұрын

  In the UK, nissan made a sunny sr with the GA16DE engine, I always wanted to make a pulsar gtir replica.

• 
  @sheldonbrett40884 ай бұрын

  Where can i buy this kit

• 
  @G2GBuilds4 ай бұрын

  Hopefully from your local parts store. It wasn't easy to find It back in 2019.

• 
  @sheldonbrett40884 ай бұрын

  Ok thank you

• 
  @BIGSTUFFZSTARCAZER5 ай бұрын

  my ga is na but has turbo mannyfold

• 
  @marshalgeneral47565 ай бұрын

  How many psi are you running on the turbo?

• 
  @G2GBuilds2 ай бұрын

  I'm currently pushing 10psi.

• 
  @user-bf8cn5ov9x5 ай бұрын

  Ga16de?я думал мы русские отбитые, с sr мучаемся, а тут...кек)))