Thank you and your dad! i love working on the engine with my dad :)

excelente Nissan power yo quiero esa receta también ❤

Nice job bro....finally got to meet dad virtually lol 😁

@G2GBuilds

Жыл бұрын

Yes. Lol He's the mastermind behind everything i do.

Great vid mate. Can't wait to see the end results of the build.

@G2GBuilds

Жыл бұрын

Thanks brother. The engine should be ready this summer, God willing.

@YABAYURENAULT4

Ай бұрын

Cómo.te fue con este setup​@@G2GBuilds

@G2GBuilds

Ай бұрын

@@YABAYURENAULT4 El motor no está terminado. Cuando el motor se arme, subiré un vídeo. 👍

Dirmelo jose! Saludos andas con el father! El duro el chequele racing!

@G2GBuilds

Жыл бұрын

Así mismo es. 💪💪

Good job.. 😊

@G2GBuilds

Жыл бұрын

Thanks my brother. 💪

Una consulta yo tambien estoy armando un nissan b13 ga16de veo tus videos(traducidos) mi pregunta es, al poner tus pistones de alta compresión que mas tiene que modificar, y tambien le pondrás turbo al motor con pistones de alta?

@G2GBuilds

7 ай бұрын

Las vielas de ga16de, tienen que ser modificadas profesionalmente para aceptar los pistones de alta compresión de honda.

Buenas y saludos lleve el mio de fabrica para la pista de Salinas en PR a correr circuto y me gustaria saber si ese motor se puede correr sin turbo y si le puedes sacar buen caballaje para poder competir sin restricciones en los eventos gracias.

@G2GBuilds

Жыл бұрын

¡Buenas tardes! Honestamente, no sé la respuesta. Está es la primera vez que hago un motor alta compresion, pero según la información, se supone que haga más power que de factoria. Si te vas con una ECU programable, ponerle ITB o 4 throttle puede que ayuden. Ya todo eso sería custom. Éxito con el proyecto.

loving the progress bro. is it still going to be boost

@G2GBuilds

Жыл бұрын

Thanks brother. I still undecided. Time will tell.

@ericarmstrong2380

Жыл бұрын

@@G2GBuilds maybe you could start allmotor and see how it runs

@G2GBuilds

Жыл бұрын

Very true..

what hi comp piston are you using?

Can you give me a link to where you got your apr head studs from?

@G2GBuilds

Жыл бұрын

I don't have the link at the moment, but they ARP head studs for S13 Nissan 240sx with the KA24DE engine.

What is the compression ratio with this piston? What fuel do you want to use? Ethanol? I think the CR will rise up 13:1.... Or you get a thicker head gasket? Wouldn't Pg6 pistons be a better choice? 🤔 At the moment I do also rebuild and making faster a Ga16De for my Nissan Micra (March). But which pistons should I use? I'm not sure about that at the moment. 😄 I hope you have some advices for me...

@G2GBuilds

Жыл бұрын

I wish i can help you with some advice, but this is the first time I'm going this build and I figure out things as I go. I'm not sure what the car will be, and instill haven't decided on which fuel I'll be running. There are not many options for head gaskets beside graphite either. Keep me posted with you build. 👍

@thomass613

Жыл бұрын

@@G2GBuilds Over the next few days, the head, piston and seal will be precisely measured. Then I can say more. It can be a maximum of 12:1, otherwise you can forget pump gas or you have to live with the fact that you have 10-15 hp less because you lose it with the ignition.

@thomass613

Жыл бұрын

Herth+Buss used to make thicker head gaskets (1.6 and 1.8mm). Unfortunately out of stock. 😔

@G2GBuilds

Жыл бұрын

@@thomass613 there is a lot of things out stock too. Camshafts is another example.

@thomass613

Жыл бұрын

@@G2GBuilds Thank God there are still enough camshafts for the European non VTC variant.... including different performance variants. 😊

What arp studs fit the ga16?

@G2GBuilds

10 ай бұрын

Nissan ka24de engine

Need some 263 cams now bro

@G2GBuilds

Жыл бұрын

I'm accepting donations. Lol 😁

@bruhmoment802

Жыл бұрын

Where can I get one of those

Hi my friend , are those pistons Honda p29?

@G2GBuilds

Жыл бұрын

Hey! Yes.

@ItzgeogamingYT

Жыл бұрын

@@G2GBuilds wow just fit like that, nice 👍🏻

@G2GBuilds

Жыл бұрын

@@ItzgeogamingYT the ga16de connecting rods must be machine first.

What ecu do u run and how are you tuned ??

@G2GBuilds

Жыл бұрын

I'll use the same one I'm using now. OBD1 sr20de ECU with nismotronic board on it.

@elitetoxicity9446

Жыл бұрын

@@G2GBuilds how are u using sr20de ecu with ga16de engine and harness ?

@G2GBuilds

Жыл бұрын

@@elitetoxicity9446 yes

Hi i have a ga14de engine what high compression piston can be used please. Help needed

@G2GBuilds

8 ай бұрын

Hello. The ga14de did not come to America. I know the block bore is smaller than the ga16de. That means that I have no idea what your possible options could be.

@YABAYURENAULT4

Ай бұрын

Puedes comprar lo mismos pistones de honda p29 pero en std que mide 75mm y tú motor de ga14de mide 73.6 mm solo tendrías que llevarlo a una rectificadora y ponerlo 1.4mm más grande el cilindro y listo saludos

Can u help me out I am trying to fully rebuild my ga16de also I either wanna do a oem rebuild or have it fully build so I won’t have any issues

@G2GBuilds

Жыл бұрын

I can help you to provide the information. My dad is the one who got the short block assemble.

@elitetoxicity9446

Жыл бұрын

@@G2GBuilds yes if you can help me with all the parts and everything I need i previously emailed u about some stuff. I am gonna have a machine shop build it for me I just need to know what parts I need to have high HP N/A car cause I don’t wanna turbo it yet

@G2GBuilds

Жыл бұрын

I got a rebuild kit from eBay, and 76mm bore Honda civic with D16 engine pistons. There are many options. I had the machine shop machine the stock GA16de rods. That's what I have. Hope it helps.

@elitetoxicity9446

Жыл бұрын

@@G2GBuilds I’m just gonna do an oem rebuild rn I just dropped the block off to the machine shop so hopefully I can have the car running before summer time

I know you said this is not a info video. But I'm desperate to know what pistons you used?

@YABAYURENAULT4

Ай бұрын

Pistones p29 de honda d16 al 40 para que quede en 76mm ya que el std de honda es 75mm

@ady-bdavid1173

Ай бұрын

@@YABAYURENAULT4 I appreciate your response 🙏🏽🙏🏽🙏🏽

Wow the block looks tiny here

@G2GBuilds

Жыл бұрын

Yes brother. This isn't a big engine.

@tortron

Жыл бұрын

@@G2GBuilds I mean, my ga15 sitting on the floor seems bigger, but it's all still in one piece

@G2GBuilds

Жыл бұрын

Got you. Yes, the block was naked. Lol

Ok but how do you get the ga16 trans to survive? I keep losing 5th gear with a stock engine lol

@G2GBuilds

Жыл бұрын

No idea. We will find out this year. Lol

Hey mahn i wana turbo my ga16 carb ...can it be done?

@G2GBuilds

Жыл бұрын

What's up brother? Anything is possible, but I'm not familiar with the GA16 carb engine. I'm sure someone has probably done it.