This channel is all about anything i ride from vintage Motorbikes and cars to race winning horses and f18 fighter planes. I aim to make content that is entertaining and educational.
I guess you can use a test light to find out which wires to splice into it unless it tells you in the instructions
@davidhoward895116 күн бұрын
I like that inline switch where you have control of turning the coolant on
@mikeraftis633224 күн бұрын
Work on the launch
@AridersLifeYT22 күн бұрын
yeah ive gotten alot better since.
@TheFunkstr197425 күн бұрын
Where do i get this slip on. All i see are single canister slip on's
@AridersLifeYT24 күн бұрын
It should be on SC projects website
@TheFunkstr197425 күн бұрын
Yeah. I think this video made my choice for me. Sounds better than all the others I've listened to.
@control38028 күн бұрын
great video but what was the stop at 3:55:55 for
@AridersLifeYT28 күн бұрын
replying to SMS's
@AridersLifeYT28 күн бұрын
wait, i can hear the beeping, im also resetting the computers Trip meter on the car, to calculate fuel.
@control38027 күн бұрын
I was thinking something like that @@AridersLifeYT
@foe_ali23Ай бұрын
Love the throttle blipping on the downshift 😍
@AridersLifeYT24 күн бұрын
I do too
@maestro3652Ай бұрын
6:45 Toyota sopra 😯
@AridersLifeYT22 күн бұрын
yeah they common as in australia.
@maestro365221 күн бұрын
@@AridersLifeYT my love
@michaelreyes007Ай бұрын
What swing arm extensions? I’m trying to do mine like this
@AridersLifeYTАй бұрын
Extreme creation
@ahmadhassoun5305Ай бұрын
Is this available?
@AndrewLane-pm2roАй бұрын
For a moment there I thought I saw 2 mufflers on a 400cc single. That would be kinda weird ...
@AridersLifeYTАй бұрын
yep, go th twin mufflers.
@Soeks77Ай бұрын
Great counter-steering when that green car pulled out most people would’ve just panic braked. You def know how to ride brother keep it up
@AridersLifeYTАй бұрын
I appreciate that
@lilynorthover8378Ай бұрын
I had a go on a Grom and accidentally did a wheelie. It fquacked off without me and left me standing there 😂😂😂 It had crash bars and bungs, it was fine.😁
@caravane12345Ай бұрын
👍
@thatpizzaguy92Ай бұрын
Can you show us how to change coolant on same model?
@AridersLifeYTАй бұрын
Sorry I have since sold this scooter
@abhaymahajan3328Ай бұрын
what mirrors do you have on the bike? sounds great!
@AridersLifeYTАй бұрын
Hello, im not sure what those mirrors were.
@Ghxstboy.OfficialАй бұрын
No way that little bike do 70
@AridersLifeYTАй бұрын
yeah man, its about 8hp, almost the same as a grom, just has shorter gearing. so yes, it could do 100kph with the correct gearing. these new gen fuel injected bikes are great,
@noblemav2 ай бұрын
Can you bring the rain over for us.💧💧💧
@AridersLifeYT2 ай бұрын
where are you located? im sick of the rain. rains like 240 days a year.
@noblemav2 ай бұрын
Banksia Grove 25ks north of Perth…mind you I’ve just come over from NSW Central Coast to live here.
@Texasphotoguy2 ай бұрын
Take my money 💴
@RRRRefuelRideRace2 ай бұрын
A well done video. Very enjoyable :)
@AridersLifeYTАй бұрын
Glad you enjoyed it!
@petewasere20002 ай бұрын
Yo were you at bro ???
@AridersLifeYT2 ай бұрын
im still around
@nothing.533.2 ай бұрын
also i got an 01 400ex but it has the newer style graphics on the side. did theu update the graphic halfeay through 01?
@AridersLifeYT2 ай бұрын
No idea
@nothing.533.2 ай бұрын
didnt these have the little neutral light on the bars like the Suzuki's?
@AridersLifeYT2 ай бұрын
yeah it does
@gakidomo95612 ай бұрын
I saw the title, I clicked it, 11hours ride, respect, liked/subbed and comment. Yeeah MATE!
@AridersLifeYT2 ай бұрын
Thank you
@demibarton42712 ай бұрын
thank you sir for letting the machine do the talking.
@AridersLifeYT2 ай бұрын
Most welcome
@AKAKiddoАй бұрын
Yes, and no music.
@mickstick28302 ай бұрын
Ok , now i want one. Even tho i had much faster bikes , this thing is old school & awsome !
@AridersLifeYT2 ай бұрын
Yeah I regret selling it
@virgoganggaming2 ай бұрын
Lost to a v-rod lmao
@AridersLifeYT2 ай бұрын
you underestimate how fast Vrods are they use porsche made revo max engines.
@Vegetable-man2 ай бұрын
I weigh like 40kg reckon I could take it to 50 or more?
@AridersLifeYT2 ай бұрын
50 what? 50km/h? 50mph?
@Vegetable-man2 ай бұрын
@@AridersLifeYT mph sorry
@AridersLifeYTАй бұрын
this did 70km/h so thats around 45mph+
@jeff.alive092 ай бұрын
Sound like MT07
@AridersLifeYT2 ай бұрын
Nah man mt07 sounds nothing like an actual vtwin in person.
@alexlampasona69562 ай бұрын
Music to my ears!
@AridersLifeYT2 ай бұрын
Most welcome
@Passionbigfish2 ай бұрын
Et je viens juste de la réparer aujourd’hui😅
@AridersLifeYT2 ай бұрын
j'utilise Google Traduction. votre problème semble différent du mien mais crée le même problème avec le vélo. j'ai vérifié tous les tubes et ils allaient bien. le mien comme la panne du capteur. J'ai vendu mon Aprilia, je regrette de l'avoir vendue.
@Passionbigfish2 ай бұрын
Bonjour il m’est arrivé exactement la même chose c’était la petite durites qui est derrière le radiateur qui remonte au détecteur dans la boîte à air et c’était juste enlevé et à cause de ça mais Moto faisait exactement comme la tienne j’espère que tu trouveras la solution bonne soirée
@AridersLifeYTАй бұрын
Bonjour, avez-vous réparé votre ? Désolé pour la réponse tardive.
@bethalpha2 ай бұрын
grom grom...i got one
@davonstewartismeeee2 ай бұрын
Good shit bro I thought he had a wheelie bar he was doing it so good
@AridersLifeYT2 ай бұрын
I miss this little bike, was so much fun
@jdee453 ай бұрын
did you have to tune the carb for the exhaust?
@AridersLifeYT2 ай бұрын
Yeah that’s fairly easy to do tho.
@jdee452 ай бұрын
@@AridersLifeYT Not for the mechanically retarded like myself 😀
@thebalvenie7573 ай бұрын
👍🏻👍🏻
@bandit86233 ай бұрын
its not a rotax.....
@AridersLifeYT2 ай бұрын
thanks for clarification.
@Rayan-rw3gt3 ай бұрын
how tall is the dude on the bike?
@AridersLifeYT3 ай бұрын
5ft10
@Rayan-rw3gt3 ай бұрын
@@AridersLifeYT love that you still replied despite years after.
@AridersLifeYT3 ай бұрын
im still around, i dont post much. but im still active on youtube pretty much every day. youtube is my TV
@RRRRefuelRideRace3 ай бұрын
Sounds deep. Enjoyed. Hot tall are you? Do you find it comfortable?
@AridersLifeYT3 ай бұрын
5ft10, yeah I got a tmax after this
@RRRRefuelRideRace3 ай бұрын
@@AridersLifeYT Cool. Thanks a lot.
@peggles__3 ай бұрын
Just to let you know, you legally have to wait until the light on the road you wish to ENTER has turned green, not until the road you entered to hook turn has turned red. You keep going early and getting upset at people doing it properly, incredibly infuriating to see people drive wrong and get annoyed at people driving right.
@AridersLifeYT3 ай бұрын
Yeah as I said in the video, I go early otherwise it causes a backup issue.
@mahenderraomesineni3 ай бұрын
Good 💯
@Trollsky3 ай бұрын
These is no "Indian" category on the SC Project website - where this muffler was bought ? It sounds mean like it should be
@AridersLifeYT3 ай бұрын
it is a genuine SC project exhaust for the FTR1200. I checked, it seems they dont make this version anymore. BUT SC project seem to have an updated one.. sc-project.com.au/product/indian-motorcycle-ftr-1200-twin-s1-muffler-titanium-with-carbon-fiber-end-cap-for-original-catalyst/
@krazed04513 ай бұрын
What's the point of the black plate under the rear wheel? Seems as if it's about 2ft behind where it would need to be if you wanted to put in a drain tray...
@AridersLifeYT3 ай бұрын
Its a service pit for the hydraulic jack unit
@krazed04513 ай бұрын
@@AridersLifeYT That makes much more sense! Every time I see these hoists advertised they label it as an oil drain point 😆
@AridersLifeYT3 ай бұрын
@@krazed0451 haha yeah drain points an odd way to explain what it is. ive always called it a service panel etc/ thats even what it says in the instruction booklet. I guess its all marketing.
@krazed04513 ай бұрын
Nice setup 🙂 Is it possible to fit a bench vise through the workbench top?
@AridersLifeYT3 ай бұрын
Yah i would want a metal plate to brace it however.
@krazed04513 ай бұрын
@@AridersLifeYT A metal plate I can do, as long as there is room close to the edge of the workbench then all good! Thanks for the reply :-)
@roydyc14054 ай бұрын
Also more horsepower then a vtr as later 5 speed vtrs were only around 30ish hp
@AridersLifeYT4 ай бұрын
yeah ive owned both bikes, the power difference isnt much. but side by side it is noticeable. i do prefer the VTR250 tho
@maxwelljohnson-ju9cj4 ай бұрын
cool video
@StevenRides4 ай бұрын
One of my favorite videos. Welcome back :)
@StevenRides4 ай бұрын
Beautiful video. Glad to see you're still uploading aswell. I remember talking to you over skype back in 2014. Hope all is well!
@AridersLifeYT4 ай бұрын
yeah im still around, i dont post much, i use to but life and such got in the way
Пікірлер
Thats beautiful
Smoke 😂😂😂
huh?
I guess you can use a test light to find out which wires to splice into it unless it tells you in the instructions
I like that inline switch where you have control of turning the coolant on
Work on the launch
yeah ive gotten alot better since.
Where do i get this slip on. All i see are single canister slip on's
It should be on SC projects website
Yeah. I think this video made my choice for me. Sounds better than all the others I've listened to.
great video but what was the stop at 3:55:55 for
replying to SMS's
wait, i can hear the beeping, im also resetting the computers Trip meter on the car, to calculate fuel.
I was thinking something like that @@AridersLifeYT
Love the throttle blipping on the downshift 😍
I do too
6:45 Toyota sopra 😯
yeah they common as in australia.
@@AridersLifeYT my love
What swing arm extensions? I’m trying to do mine like this
Extreme creation
Is this available?
For a moment there I thought I saw 2 mufflers on a 400cc single. That would be kinda weird ...
yep, go th twin mufflers.
Great counter-steering when that green car pulled out most people would’ve just panic braked. You def know how to ride brother keep it up
I appreciate that
I had a go on a Grom and accidentally did a wheelie. It fquacked off without me and left me standing there 😂😂😂 It had crash bars and bungs, it was fine.😁
👍
Can you show us how to change coolant on same model?
Sorry I have since sold this scooter
what mirrors do you have on the bike? sounds great!
Hello, im not sure what those mirrors were.
No way that little bike do 70
yeah man, its about 8hp, almost the same as a grom, just has shorter gearing. so yes, it could do 100kph with the correct gearing. these new gen fuel injected bikes are great,
Can you bring the rain over for us.💧💧💧
where are you located? im sick of the rain. rains like 240 days a year.
Banksia Grove 25ks north of Perth…mind you I’ve just come over from NSW Central Coast to live here.
Take my money 💴
A well done video. Very enjoyable :)
Glad you enjoyed it!
Yo were you at bro ???
im still around
also i got an 01 400ex but it has the newer style graphics on the side. did theu update the graphic halfeay through 01?
No idea
didnt these have the little neutral light on the bars like the Suzuki's?
yeah it does
I saw the title, I clicked it, 11hours ride, respect, liked/subbed and comment. Yeeah MATE!
Thank you
thank you sir for letting the machine do the talking.
Most welcome
Yes, and no music.
Ok , now i want one. Even tho i had much faster bikes , this thing is old school & awsome !
Yeah I regret selling it
Lost to a v-rod lmao
you underestimate how fast Vrods are they use porsche made revo max engines.
I weigh like 40kg reckon I could take it to 50 or more?
50 what? 50km/h? 50mph?
@@AridersLifeYT mph sorry
this did 70km/h so thats around 45mph+
Sound like MT07
Nah man mt07 sounds nothing like an actual vtwin in person.
Music to my ears!
Most welcome
Et je viens juste de la réparer aujourd’hui😅
j'utilise Google Traduction. votre problème semble différent du mien mais crée le même problème avec le vélo. j'ai vérifié tous les tubes et ils allaient bien. le mien comme la panne du capteur. J'ai vendu mon Aprilia, je regrette de l'avoir vendue.
Bonjour il m’est arrivé exactement la même chose c’était la petite durites qui est derrière le radiateur qui remonte au détecteur dans la boîte à air et c’était juste enlevé et à cause de ça mais Moto faisait exactement comme la tienne j’espère que tu trouveras la solution bonne soirée
Bonjour, avez-vous réparé votre ? Désolé pour la réponse tardive.
grom grom...i got one
Good shit bro I thought he had a wheelie bar he was doing it so good
I miss this little bike, was so much fun
did you have to tune the carb for the exhaust?
Yeah that’s fairly easy to do tho.
@@AridersLifeYT Not for the mechanically retarded like myself 😀
👍🏻👍🏻
its not a rotax.....
thanks for clarification.
how tall is the dude on the bike?
5ft10
@@AridersLifeYT love that you still replied despite years after.
im still around, i dont post much. but im still active on youtube pretty much every day. youtube is my TV
Sounds deep. Enjoyed. Hot tall are you? Do you find it comfortable?
5ft10, yeah I got a tmax after this
@@AridersLifeYT Cool. Thanks a lot.
Just to let you know, you legally have to wait until the light on the road you wish to ENTER has turned green, not until the road you entered to hook turn has turned red. You keep going early and getting upset at people doing it properly, incredibly infuriating to see people drive wrong and get annoyed at people driving right.
Yeah as I said in the video, I go early otherwise it causes a backup issue.
Good 💯
These is no "Indian" category on the SC Project website - where this muffler was bought ? It sounds mean like it should be
it is a genuine SC project exhaust for the FTR1200. I checked, it seems they dont make this version anymore. BUT SC project seem to have an updated one.. sc-project.com.au/product/indian-motorcycle-ftr-1200-twin-s1-muffler-titanium-with-carbon-fiber-end-cap-for-original-catalyst/
What's the point of the black plate under the rear wheel? Seems as if it's about 2ft behind where it would need to be if you wanted to put in a drain tray...
Its a service pit for the hydraulic jack unit
@@AridersLifeYT That makes much more sense! Every time I see these hoists advertised they label it as an oil drain point 😆
@@krazed0451 haha yeah drain points an odd way to explain what it is. ive always called it a service panel etc/ thats even what it says in the instruction booklet. I guess its all marketing.
Nice setup 🙂 Is it possible to fit a bench vise through the workbench top?
Yah i would want a metal plate to brace it however.
@@AridersLifeYT A metal plate I can do, as long as there is room close to the edge of the workbench then all good! Thanks for the reply :-)
Also more horsepower then a vtr as later 5 speed vtrs were only around 30ish hp
yeah ive owned both bikes, the power difference isnt much. but side by side it is noticeable. i do prefer the VTR250 tho
cool video
One of my favorite videos. Welcome back :)
Beautiful video. Glad to see you're still uploading aswell. I remember talking to you over skype back in 2014. Hope all is well!
yeah im still around, i dont post much, i use to but life and such got in the way