Пікірлер

• 
  @user-rt9kh6tv3v2 күн бұрын

  I can not retract the tail stock quill, I’ve tried all m codes no response.

• 
  @user-rt9kh6tv3v2 күн бұрын

  Hi

• 
  @gilson639619 күн бұрын

  Hello sir.Can you please help me on how setup on SL603

• 
  @user-ty6hl5ux9zАй бұрын

  Sir zoom nothing is seen which key are u using to operate

• 
  @KuntianCNCmachinetoolMIissZhouАй бұрын

  👍

• 
  @MikeY-vj8znАй бұрын

  good explanation

• 
  @Derpadeedooda2 ай бұрын

  This could be done in 30 seconds with a touch setter

• 
  @Vikingman20242 ай бұрын

  What year is this Doosan Lynx 220?

• 
  @bensonlicayan513 ай бұрын

  May i ask cost of machine like that, want have some idea. Thanks.

• 
  @minutehex3 ай бұрын

  Hallo bro . Please review GSK

• 
  @johnmaksim62793 ай бұрын

  That was a nicely done demo.

• 
  @josephscott19523 ай бұрын

  432 is a roughing insert 431 is a finishing insert

• 
  @azbrannon3 ай бұрын

  Excellent video! I just purchased a used Fanuc controlled lathe and this video has been very helpful in getting up to speed with setup and operation.

• 
  @RICREYNOLDSMUSIC4 ай бұрын

  All you have to do is explain that all tools are timed off the main tool. Timed meaning coming from that tool. But great work as well.

• 
  @Recuerdos1992Usulutan4 ай бұрын

  Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.

• 
  @elliotrosales58905 ай бұрын

  What about the workshift settings?

• 
  @user-pe4cx4tc1j5 ай бұрын

  How can I bind the "C" axis?

• 
  @user-pe4cx4tc1j5 ай бұрын

  Как можно привязать ось "С" ?

• 
  @nasrahmed62365 ай бұрын

  Thats realy great thanks alot

• 
  @adambergendorff27026 ай бұрын

  Helpful video!

• 
  @MD-tm2zp6 ай бұрын

  Parsan 12552

• 
  @MD-tm2zp6 ай бұрын

  Parsan 12552

• 
  @vizibug7 ай бұрын

  "orientate"...

• 
  @KingOfGamesUSA7 ай бұрын

  no voice please increase the volume thanks

• 
  @slicksjobshop7 ай бұрын

  Once you've successfully set up both tools and work off set. Loaded the program into the machine. Where do you go from there to start running? Go back to MEM mode, hit progam and cycle start?

• 
  @doc03027 ай бұрын

  I hate fanuc😢

• 
  @bakhiriddinkutlimurotov32268 ай бұрын

  Как подключить покажи

• 
  @eduarruiz54228 ай бұрын

  buenas tardes cual es el codigo para descativar la alarma de la puerta gracias

• 
  @fvkthsstm85244 ай бұрын

  en la caja que trae tiene los codigos pegados,donde estoy trabajando aurita es solo haas que tenemos y ganesh

• 
  @stx93279 ай бұрын

  Check coolan and air levels before!

• 
  @chihuahuaoraculo58009 ай бұрын

  Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.

• 
  @HectorHernandez-ru5ws10 ай бұрын

  I añmps forgot all about cnC lathes,, besides ,I'm making more money on construction.

• 
  @user-pe4cx4tc1j10 ай бұрын

  Thank you for sharing your experience. Please tell me if Okuma has a graphical simulation mode? And if so, how to use it.

• 
  @user-pe4cx4tc1j10 ай бұрын

  Спасибо что делишься опытом. Скажи пожалуйста есть ли на Okuma режим графическая симуляция? И если да то как им пользоваться.

• 
  @bakhiriddinkutlimurotov32268 ай бұрын

  Привет как подключить знайте это станок

• 
  @gecekusu930111 ай бұрын

  Hocam merhaba ben Türkiye den yazıyorum 🎉

• 
  @ValeriiAS11 ай бұрын

  thanks a lot!

• 
  @QuebecoisSti Жыл бұрын

  Where did you get the bright screen ? I have a OSP700M (CadetMate) and the screen is hard to read, especially if there's alot of lights around in the shop. Is it easy to swap and costly ? Best regards

• 
  @keithlucas6260 Жыл бұрын

  Ran one of these and a mill back in 2015 for a oil tool company. The Okuma mill was a lot of fun.

• 
  @sureshdurai5710 Жыл бұрын

  Hai Sir, pls any video available how to take Okuma tool offset & programming examble pls.

• 
  @dailymotivational1993 Жыл бұрын

  Where is your country sir??

• 
  @mastercode2188 Жыл бұрын

  What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks

• 
  @ronaldromero67727 ай бұрын

  To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.

• 
  @ironstudionorth5129 Жыл бұрын

  if you had an entire series like this about this controller id buy it

• 
  @niyaziyagc7911 Жыл бұрын

  Thank you ...

• 
  @BNEdynamics Жыл бұрын

  great videos! Thanks for making and posting them.

• 
  @adamsevcik7708 Жыл бұрын

  i worked on this machine with live tooling for almost a year, it was a terrible experience - this whole "g-coding" in 21st century is obsolete, eligable just for large series where one person writes the code and another runs the machine, any small changes to complex contours or tool movements may take dozens of minutes, also you can't properly see what the machine is going to do, just hit the green button and pray everything's been written correctly :) work overtimes, do small changes to program "half an hour before the shift ends", forget to add "G0 G28 U0" before tool change and you end up with turret turning into your rotating workpiece - most of CNC crashes are caused by low experienced and inattentive staff fiddling with the code now i work with old mazak QTN with mazatrol system and that's completly different stuff - you just write operations what the machine will do and system generates G-codes for itself, also you can open "simulation" and see what exactly the tool is going to do - while G-coding takes hours, in mazatrol you can write whole program in few minutes and changes in the program takes dozens of seconds, it's really idiot-proof, eligable for few-piece production i often change work on my lathe 2-3 times per shift, two pieces of stainless flanges, then some aluminum wheels, i use different ID roughing tools, so I don't have to stop the program to change cutting conditions - i just press buttons to change spinle speed to 80%, feed to 110% and instantly save it in the program for the next part... and then change program for new revision of steel shafts where i change roughing contour within few seconds, delete whole finishing process, copy roughing process instead of finishing and delete roughing tool and add finishing tool for the proces - less than minute change, no fucking around with some stupid G-codes, I can view simulation of the program and machine is ready to run first part within few minutes - if i had to do it in this crappy fanuc system, only thing i'd be changing is my job

• 
  @pinoystalk2280 Жыл бұрын

  May i know how to use graphic simulator?

• 
  @alfredomejia410 Жыл бұрын

  So after the first tool has been touched off from the 123 block and part , do the rest of the tools needed also get touched off from the part? Or just the 123 block?

• 
  @joshuafeldman367 Жыл бұрын

  Just a heads up I work on the same machine but when I bring the tool up to the stylus I get about 5mm away then put it in jog and press your axis direction. The turret will automatically stop moving when it makes contact.

• 
  @davidnguyen9572 Жыл бұрын

  This is my job 9 years ago other day One coworker know me cough a lot he gave me cough medicine but he lie he gave me the mental medicine I was not remember a lot of words and the boss go play to me then I quit job

• 
  @RANJEETKUMAR-ml5lf Жыл бұрын

  Please sir make a video for explain all key details

• 
  @jakuder82 Жыл бұрын

  You touched the tool off wrong, you had tool 9 up but you touched it off in tool 10 offset.