Пікірлер

• 
  @chuckvaughnКүн бұрын

  Remodeled the bathroom this past summer. Took the toilet out. Cleaned it from top to bottom and put it right back into service. Never happier. Just keep the low volume flush toilets cleaned out so all water flows as it should. And yes I bought a brush so no using my finger anymore. 😅

• 
  @sotosbrother9389Күн бұрын

  How is the Mr cool working ?

• 
  @chuckvaughnКүн бұрын

  @@sotosbrother9389 still going strong. 100+ Missouri heat and the house is chil 👍

• 
  @CubanMofo7 күн бұрын

  How's its going? Mine was the 5ton Mrcool heat pump universal. Mine broke down a bunch of times. Then I replaced it with another brand

• 
  @chuckvaughnКүн бұрын

  @@CubanMofo mine is still going strong. Knock on wood!!! No problem from the install

• 
  @doctorziggy583919 күн бұрын

  Thank you so much! We purchased the cleaner, scooped out some of the water and poured an entire bottle of the bar keepers toilet cleaner in there. When we got home we flushed it and it worked great. Saved me almost $1000 in repairs. Thank you!!!

• 
  @chuckvaughnКүн бұрын

  @@doctorziggy5839 I'm glad it's working for you.

• 
  @mikepsstanley4532Ай бұрын

  You win the internet! Worked perfectly, thanks for sharing this!

• 
  @chuckvaughnКүн бұрын

  Glad it helped!

• 
  @Zac-ng3gbАй бұрын

  Where can I buy one??

• 
  @aceactiv35312 ай бұрын

  Tried doing that with mine but they were plastic😂

• 
  @marlonpresz72392 ай бұрын

  Thank you for your videos . Do u have any idea about the consuction of the unit winter time season Thank you

• 
  @joeymecom13112 ай бұрын

  Thank you mine was really clogged. I’ve seen other videos they said something about it but I was like mine doesn’t have that whole then I typed in the toilet name and found your video and you said the same thing but explained a little bit better and I poked around down there and found out. Yeah there’s a whole crazy never had a toilet back up like that.which that much hard calcium I could’ve swore up and down that there was no hole there Thank you again save me from buying another toilet

• 
  @chuckvaughnАй бұрын

  Glad we could help

• 
  @elpatron032 ай бұрын

  Thanks, that did the trick !!

• 
  @chuckvaughn2 ай бұрын

  Good to hear it

• 
  @edmundcano5214 ай бұрын

  Holy shit! You were right on! Worked like a charm. I used a small bottle brush, and a (pair of gloves )lol thanks you sir.

• 
  @chuckvaughn4 ай бұрын

  I'm glad this is still helping people after two years. Our glacier bay is still installed and going strong. Going to do a bathroom remodel and actually keep the toilet. Just might take it into the yard and hit it with the high pressure washer to clean out all the little cracks and crevasses. Thanks for your response and glad it worked for you!!! 👍

• 
  @jacobladuke49394 ай бұрын

  This fixed my issue, thank you sir!!

• 
  @chuckvaughn4 ай бұрын

  Glad to help

• 
  @sg3608a2 ай бұрын

  Fixed my issue too! Thank you!

• 
  @user-no3yp2zj3l6 ай бұрын

  Omg you are doing very well.

• 
  @AlexPerez-bn7uh6 ай бұрын

  1912 must have been rewired. Wheres the nob and tube

• 
  @chuckvaughn6 ай бұрын

  There was limited knob and tube. But rewired in 1979.

• 
  @AlexPerez-bn7uh6 ай бұрын

  @@chuckvaughn that's because people didn't need all the crap they "need" now. Back in the day there was like 4 circuits maybe. Now I go to houses with 3 subs or more

• 
  @Einzee6 ай бұрын

  Hopefully you'll consider pulling in an extra circuit to feed new outlets. It looks like at least one of the existing outlets is above a countertop in a kitchen and that should be reserved for small appliances being used in the kitchen.

• 
  @chuckvaughn6 ай бұрын

  This circuit only feeds the counter top outlet and another in the kitchen on a wall that is hard to get to. This outlet only has a phone charger plugged in. So this one will not do much more but give a place to plug something in sitting on the window counter. Thanks

• 
  @seancrowley75206 ай бұрын

  ​@@chuckvaughnyou do you

• 
  @caitlyn_rene6 ай бұрын

  Just because it’s considered gaudy now doesn’t mean it was back then.

• 
  @chuckvaughn6 ай бұрын

  With the color and everything that was in it I'm sure it was high dollar back in the day and something that everybody wanted

• 
  @eaj29006 күн бұрын

  The wallpaper behind my shower tile was similar colors green with pink flamingos, we were shocked it’s wasn’t rotten

• 
  @Allie3716 ай бұрын

  What are you❤

• 
  @chuckvaughn6 ай бұрын

  I just enjoy doing DIY.

• 
  @jacobcorrigan38716 ай бұрын

  I'm going to dog-pile on these comments. You nailed the issue with my toilet. Thanks!

• 
  @chuckvaughn6 ай бұрын

  I'm glad people are finding this. I was ready to give in. Was told many times, just replace it. But I just couldn't get past the idea that it had to have something wrong that could be fixed. I understand all these low volume toilets have the same problem whether push button or not.

• 
  @ajlacostewm6 ай бұрын

  Well? Who won?

• 
  @chuckvaughn6 ай бұрын

  Chiefs

• 
  @kevinconte93436 ай бұрын

  The elusive Mr cool in the wild where’s the spool of extra lineset 😂 , that outdoor coil is looking plugged up , brush or hose it off for better airflow/efficiency

• 
  @chuckvaughn6 ай бұрын

  Always a critic. It's -12 and glad you can see how plugged up the coil is. It was served this fall about 3 months ago. We have had extra warm temps so not sure where the debris came from. Grass was still green a week ago. But no extra coil of lineset. I measured and got the correct length. As I say, always a critic. 3 years ago spent 2500 and did it myself instead of the 7500 that a pro wanted. I'm very happy with my diy. And yes funny how no one wants to say, good for you. Social media has made trolls out of all of us. Just trying to help others out here in case they can't afford the pros. Thanks for your comment...

• 
  @bigvegass6 ай бұрын

  They work down to well below that.

• 
  @chuckvaughn6 ай бұрын

  It's -12 here in Missouri January 14th 2024 and I wanted to give an update to the heat pump if you're watching this now and looking at the wiring I had added a heat strip and when I did I needed to disconnect l1 and l2 otherwise it blew breakers and did all sorts of stupid stuff and some people said melted things down but of course the instructions for the heat kit for some of us weren't as good as some of the other people that got instructions. Please wait for the update and check back on how we're doing

• 
  @chuckvaughn6 ай бұрын

  Is -12 here in Missouri today on January 14th 2024 and I wanted to give an update so check for update

• 
  @timobrien42816 ай бұрын

  Thanks for posting! I burned up my wires from the air handler to the heat kit by connecting this way. Would appreciate if they would have mentioned this in the heat kit instructions.

• 
  @chuckvaughn6 ай бұрын

  Someone said their instructions were clear. I'm not sure we all get the same instructions. I had an electrical license at one time so I have a clue. My instructions never said anything about disconnecting anything with a heat kit install. Just like the thermostat was to have the O/B switched for heat to cool. My thermostat had the heat pump running in cool mode and AC in the heat mode. I thought I really messed up until I called support about the bad thermostat and I was told their default is heat mode where 70% of heat pumps run with cool as the default mode.

• 
  @jarroddavis70416 ай бұрын

  I also failed to remove power from the L1 and L2 on the air handler board when I installed the heat kit. When the outside unit went into defrost mode, the air handler fan would stop, causing a partially successful defrost cycle - another words not fully defrosting the coil as no air was flowing across the indoor coil The heat strips could be made to come on, but only when thermostat was switched to Emergency heat. I removed power from L1 and L2 from the board and the unit would not function when calling for heat, no air handler and no outside unit. Turns out the two wires from the load side of the heat strip breaker that went to the MOLEX connector were severed- broke in half right at the base of the internal connector inside the MOLEX. This was why no power was being fed to the board and thus nothing would operate as it was supposed to. I simply made an external splice outside the MOLEX (but inside the air handler) to complete the circuit. The system now works as designed - VERY important to follow directions!

• 
  @Royals207 ай бұрын

  You are a life saver. I was having the same problem and couldn’t figure it out to save my life. My wife was getting upset with me. So I stuck my hand in there and sure enough it was almost completely clogged

• 
  @chuckvaughn7 ай бұрын

  Go KC! They never tell you to do maintenance on your toilet. They would rather sell you a new one! Glad I could help.

• 
  @cjcarper61877 ай бұрын

  I just used this “finger in the hole” method and IT WORKED!!!! 🎉🎉🎉😀☺️THANK YOU, THANK YOU, THANK YOU VERY MUCH 🙏🏾🙏🏾🙏🏾 It’s been stuck since Thursday night!

• 
  @chuckvaughn7 ай бұрын

  Glad it worked for you

• 
  @robertoiffel7 ай бұрын

  Omg was JUST going to get a new toilet till I saw your video it worked. Thank you so much.

• 
  @polloramos68338 ай бұрын

  That's a million I just did what you and it worked . Gracias from Redford Michigan.

• 
  @hittman-08 ай бұрын

  Whats the wire cauge ?

• 
  @karemf208 ай бұрын

  Wow im so thrilled that it actually worked. My husband snaked it last week and no fix.. this was the fix. Thank you. I have to show him this.

• 
  @vfr800ification8 ай бұрын

  Oh, thank god I found this video. Unfortunately, I had already purchased a new flush valve which didn't solve the problem. I was thinking the toilet was possibly clogged in the drain. Ours is a Costco dual flush by Wateridge and this fixed it. Thanks again.

• 
  @chuckvaughn8 ай бұрын

  Glad to hear it fixed your problem. My folks have a regular flush and it helped them as well. Not just the dual flush anymore! 👍

• 
  @randomthoughtstoday8 ай бұрын

  Great idea, but unfortunately i have a new toilet, i tried this just incase and no dice. My toilet when i press low or high flush wants to discard the water, but most of it doesn't flush.

• 
  @antoniorealzola89268 ай бұрын

  trash video

• 
  @tomo90978 ай бұрын

  My issue is generally the toilet flushes fine but now it takes 30 to 90 seconds to start refilling. It has begun happening on a second toilet now. Perhaps i am on the way to the same non filling issue?

• 
  @chuckvaughn8 ай бұрын

  Kind of sounds like a float problem maybe. I'm lucky not to have those internal problems.

• 
  @zacktheagene37038 ай бұрын

  How did you use the factory connection?

• 
  @chuckvaughn8 ай бұрын

  I took the wire off the old speaker with a soldering iron. Then soldiered the wire to the new speaker.

• 
  @gtohavoc72578 ай бұрын

  Dude you just saved me a toilet!! You’re the best!!!!!!

• 
  @chuckvaughn8 ай бұрын

  Glad it worked

• 
  @KWill-cs4hy8 ай бұрын

  Thanks!!! Fixed my daughter's Glacier Bay dual flush toilet. Wouldn't hardly flush at all before, now it's flushes great. I used a metal coat hanger to probe into the hole. I could feel at least two small passages in there, which I reamed out with the hanger.

• 
  @chuckvaughn8 ай бұрын

  Glad it worked for you

• 
  @dmumms9 ай бұрын

  You are a God! Replaced everything on this toilet and still had issues until I tried this. I love you more than my own mother.

• 
  @chuckvaughn9 ай бұрын

  Did the same thing. Change everything but pulling it off the floor and then I found the hole... Next year will be 8 years

• 
  @ikkifenix14939 ай бұрын

  9

• 
  @omarazmery9 ай бұрын

  Thank you so much. Thank you.

• 
  @AlyssaGalella9 ай бұрын

  You just saved me a billion dollars, thank you sir! 🫡

• 
  @ivancook12479 ай бұрын

  Drill another hole

• 
  @muteclaude696910 ай бұрын

  Nice,but the car already has great speakes especially for 2009

• 
  @chuckvaughn9 ай бұрын

  Mine were trashed by the hot sun. Cones destroyed

• 
  @annekk5710 ай бұрын

  OMG! My toilet is fixed thanks to your video! I ended up using a 1/4" self-tapping bolt to clear the opening. Is there a better tool for this? There's not a lot of space for most tools.

• 
  @chuckvaughn10 ай бұрын

  Some people just bend a coat hanger and poke around. Whatever it takes. Just glad it worked for you

• 
  @r.carson620210 ай бұрын

  THANK YOU!!!!! Had same problem...about to do plumber search on a fixed income. God Bless!

• 
  @chuckvaughn10 ай бұрын

  Glad it worked for you

• 
  @rachels.999211 ай бұрын

  😮 thank you so much!!!!

• 
  @user-ck2dj5my4p11 ай бұрын

  Mine has the green light flashing on the air handler main board and it doesn't cool

• 
  @chuckvaughn11 ай бұрын

  I would contact customer service from whomever you bought this from I know I had to contact customer service and they walked me through everything I needed to know. They know what all the flashing lights mean and if it's normal

• 
  @erikjbrown11 ай бұрын

  Was hoping to see what thermostat wirres went where. I dont see a cooling terminal on the air handler

• 
  @chuckvaughn11 ай бұрын

  I just matched up mine on the paperwork. One I hooked up to the outside wasn't needed. I called customer support and they walked me through it

• 
  @erikjbrown11 ай бұрын

  @@chuckvaughn My air handler has no yellow connection, so that was confusing (yellow from thermostat goes to outside unit) then i also have the aux heat kit, so its been interesting trying to cross reference the thermostat, air handler, and condenser. Think i finally got it. Will find out soon. Thanks for the vid - it did help

• 
  @cd116811 ай бұрын

  Looks horrible.

• 
  @chuckvaughn11 ай бұрын

  I don't care how it looks to you. I've been having 125 bills during this 100+ heat. Cools great and heats just the same. So I'm happy. 😂