Hi. My printer isn't printing yellow. Tried deep cleaning. Opening vacuum, manual print head cleaning. Deep cleaning again. Still not printing. Any other thing I can try?
@KaraBuntin20 күн бұрын
Try shooting hot water through the print head using a plunger syringe…. Sometimes the pressure will loosen whatever’s in there. If it 100% won’t print after all of that it might be time to replace the printer.
@trevorvarathaiah20 күн бұрын
@KaraBuntin Tried it. Not sure how hot the water was though.
@trevorvarathaiah20 күн бұрын
@KaraBuntinTutorials Don't have a dishwasher unfortunately 😕
@trevorvarathaiah20 күн бұрын
@@KaraBuntinTutorials I'll give that a try. Thanks.
@francessaunders624829 күн бұрын
Been looking for this answer forever?!! Thank you
@Acaketoremember29 күн бұрын
I'm glad I could help!
@meowpilledАй бұрын
oh my god i owe you my life thank you so much 😭😭😭😭😭
@AcaketorememberАй бұрын
This video has saved the lives of a lot of people!
@kazseeto3573Ай бұрын
How long do they last on either a buttercream or fondant cake. Can make my cake ahead?
@AcaketorememberАй бұрын
Moisture will damage them, so if condensation forms on the cake when it's taken out of the fridge that can make them sag. If it's at room temperature then it's not going to be much of a problem.
@kazseeto3573Ай бұрын
@@Acaketoremember Thank you so my understanding I leave out of the fridge and will be ok the day before. I appreciate your help.
@dellr47062 ай бұрын
Thank you!
@Acaketoremember2 ай бұрын
Thanks for watching!
@jpendowski75032 ай бұрын
Well spoken and illustrated from the photos. I appreciate your expertise.
@Acaketoremember2 ай бұрын
Many thanks!
@twosweetcakes2 ай бұрын
This is the truth. Cannot count how many printers I have been though over the years.
@KaraBuntin2 ай бұрын
so many printers.....
@jillaz10033 ай бұрын
Many factors to consider before buying tools and equipment. Great points to ponder!
@georgiahackbarth89253 ай бұрын
Great information.
@Acaketoremember3 ай бұрын
Thanks for watching!
@Jewelrybyirina3 ай бұрын
Thank you!
@Acaketoremember3 ай бұрын
You're welcome!
@jennyjumpjump3 ай бұрын
It probably helps that you do enough volume that you need multiple printers. You have a backup printer while you're fixing the other
@Acaketoremember3 ай бұрын
I have to because they conk out randomly
@thehillsintexas3 ай бұрын
Great info!
@Acaketoremember3 ай бұрын
Thanks for watching!
@JillsTreasureChest3 ай бұрын
Thank you.
@Acaketoremember3 ай бұрын
You're welcome!
@TheBadNeighborCreations3 ай бұрын
Great video!
@Acaketoremember3 ай бұрын
Thanks!
@random-girlzps42833 ай бұрын
Great video
@Acaketoremember3 ай бұрын
Thanks for the visit
@TheBadNeighborDecals3 ай бұрын
Great video
@Acaketoremember3 ай бұрын
Thanks!
@MzLelaPinkJourney3 ай бұрын
Thanks so much for all of these great tips related to edible ink printers, using local printers and cost saving methods for edible cake / food decor. This sort of reminds of whether or it is beneficial to purchase large format sublimation or DTF printers for the Decorated Apparel industry.
@Acaketoremember3 ай бұрын
You are so welcome!
@marianemanic78183 ай бұрын
Thank you for this informative video. I found it very helpful.
@Acaketoremember3 ай бұрын
Thanks for watching :)
@anamart2943 ай бұрын
Can you buy one and then leave a bad review explaining this is yours?
@TigerChic3 ай бұрын
This makes me so mad. I never realized it had gotten so bad. But I also thought Amazon would do better. I really hope they can find a way to protect the artists and creators from all of this. Watermarks no longer work, nothing does now that we have AI. I just don't know what it will take but I hope they find a solution real soon.
@Acaketoremember3 ай бұрын
Amazon has no reason to remove photos because even if they’re not accurate they bring traffic to the site. They don’t care as long as people buy something. It’s definitely frustrating.
@TigerChic3 ай бұрын
@@Acaketoremember Oh I know! Amazon does not care about the seller and not a whole lot about the buyer either. I despise Amazon! I got approved for the influencer program and I just could not bring myself to help them prosper any more than they already do. Bezos is a greedy *** I hope things get better for you
@digitalfineart83563 ай бұрын
😵💫 Crazy. Sad and crazy.
@Acaketoremember3 ай бұрын
It's pretty common, unfortunately.
@wklein87453 ай бұрын
What if you actually bought the product that they are selling and then you leave a review with their product and comparison with your own product and basically in the review say that it’s copyright and infringement Amazon will not take this listing down because they have stolen my images I am the original creator, etc.
@Acaketoremember3 ай бұрын
I've thought of doing that, but they would just steal more, and the review would get lost on Amazon after a while. They'd probably report the review and Amazon would take it down...They've stolen more of my photos and photos of other people, it's not just me. You have to decide whether you want to spend your time chasing these people down when they'll just do it again, or whether you want to worry about other things.
@Parisloverable3 ай бұрын
Maybe consider watermarking your images with the logo nstead of just relying on the small logo in the corner...
@Acaketoremember3 ай бұрын
Watermarks can be removed really easily. I put the logo in the corner for brand recognition but i don’t expect it to stop people if they’re photo thief dirtbags.
@BlondieLou853 ай бұрын
i always write directly to the head of legal services when this happens to me (it hasnt on amazon but other large companies) and usually gets things escalated for action to be taken
@Acaketoremember3 ай бұрын
I've filed the correct paperwork multiple times and amazon won't take the photos down. They tend to do shady things with listings in general, it's not just the photos.
@KASH100433 ай бұрын
It's so difficult for anyone in the creative community to make it now with the amount of theft taking place. Many years ago I used to sell handmade items at parks, fairs and to stores directly. Occasionally I would see people trying to copy an item but it was rare. Then sites like the ones you mention came in and all they care about is making a buck, no respect for artists at all. So thank you for the links to where I can buy from the artists themselves.
@Acaketoremember3 ай бұрын
It's true, and it's definitely demoralizing when you see people buying things because they're cheap and justifying it by saying that you get "the same things" because the photos are the same.
@auntmayme81193 ай бұрын
I'm a handmade seller as well. My things are OOAK, and I was wondering if I should add my shop logo to all my listing photos, the first and second ones. I don't have as many sales as you, nor are my items as popular. But with this in mind, should I add my shop logo to my first and second photos?
@Acaketoremember3 ай бұрын
I do because of branding so that people learn to see my logo. I don't do it for preventing photo theft because people steal them anyway. It's easy to remove logos no, I can do it in about five seconds using photoshop.
@Robbieswine-n-design3 ай бұрын
Hi-I just got my printer and put the cartridges in. My printer didn’t come with any instructions….do I do some kind of test print….and how do you clean them? I’d love to know as much as you do about this. I’ll be using mine for the wafer papers for the chocolate covered Oreos. Would appreciate any and all advice you can give. Thank you :)
@Acaketoremember3 ай бұрын
Good luck! Set it up the normal way that you would use a regular printer, but use the food coloring ink. Do a test print to begin with, and if you have to do a basic cleaning to get the ink going do that. (that's in the maintenance section of the print controls.) Watch my other videos about how to clean the print heads, and make sure that you're printing something once a day, even if it's just a test print, to keep the ink going through the printer.
@marianemanic78183 ай бұрын
Getting ripped off totally sucks! AI is getting to be very scary...thank you for the heads up!
@Acaketoremember3 ай бұрын
It is scary...I think there will probably be a lot of litigation about it soon, but it's going to be hard to control.
@threedeeprince3 ай бұрын
While I think that it’s wrong for someone stealing your photos or product ideas, I think you could look at it a different way too. You could be proud of your unique creation, that it’s good enough for it to be stolen. 🤷🏽♂️
@Acaketoremember3 ай бұрын
That's really no consolation if people steal your work!
@gracemakeslace3 ай бұрын
It's not really a consolation. I've definitely not bought listings because I've seen the same image across many different platforms and I just assume it's some machine made polyester made in China garbage and not something actually handmade.
@Acaketoremember3 ай бұрын
That's the problem, it might very well be something junky. You just don't know.
@auntmayme81193 ай бұрын
I used to think this way, too. But if I'm a small seller who is dependent on word-of-mouth advertising, I certainly wouldn't want someone to call me out on an item I didn't make.
@Erica.S193 ай бұрын
Wow I'm fixing to invest in a printer for editable papers. What brand or model do you recommend starting out with? I think you should maybe team up with the Printer Companies and make an ink head that is more manageable for cleaning and be better at printing. They never know what to fix unless people like you with so much experience tell them. TFS this!! New subbie btw!
@Acaketoremember3 ай бұрын
The problem is the inks, not the print heads, apparently. The food coloring isn't the same consistency as real ink, so the magenta is thicker than normal ink and it clogs up more often. The black clogs too, because it's a mix of all of the colors so it has magenta in it.
@Acaketoremember3 ай бұрын
Oops, I forgot to add to get a Canon printer, because you can remove the print heads from those, and a lot of other brands don't let you do that.
@beyzasz3 ай бұрын
That answered all The questions I had for my next cake. Thank you so much!!
@Acaketoremember3 ай бұрын
Happy to help!
@ferrarired934 ай бұрын
Does this conditioner help prevent the condensation from bending the wafer paper once we remove from a fridge.?
@KaraBuntin4 ай бұрын
Probably not 100%. Any moisture will make wafer curl. But the conditioner does make it slightly resistant to absorbing moisture directly, so it could help a little.
@lizmeans3655 ай бұрын
I love this video and a couple of others I have just watched. I love your honesty about the frustrations and mysteries you have with them. We have the same issues but I really thought it was because I was a bit of a technophobe! Thanks for the reassurances! I thought I was a sucker for replacing our printer because I just couldn't get the first one I'd ever tried working, now I feel better and am thinking about having a back up printer on hand!
@andreajones58115 ай бұрын
Very very helpful
@jessward30255 ай бұрын
I understand the burner issues on glasstops. My glass top stove big burner is horrible but small front burner stays pretty consistent but it gets too hot on 5 for sugar gotta keep it on 4. So I bought a hotplate to fix the issues. I always wanted a glass top but now not sure that was a good idea since making candies.
@Acaketoremember5 ай бұрын
The glass top is terrible!
@renaeausburn99325 ай бұрын
So ow long can you soak a print head in water? Is overnight too long? Also, Magent!! Ugh! It’s the only one that ever gives an issue. I clean the printhead and works great. The very next day the pink is barely there. Cleaning daily is stupid. You mentioned magenta maybe sold from bad batch, is there a particular brand you trust? Icing images is where it came from.
@Acaketoremember5 ай бұрын
It's not a bad batch at this point, they fixed that, but the magenta is thicker than the other ink, so it clogs faster. I've been having problems with the black ink recently, and I never did before. Black has magenta in it, so I think part of it could be that. It's REALLY aggravating. I did try a different ink brand and it did the exact same thing, so that didn't matter. I also think that the food coloring ink basically burns out the print head a lot faster than regular ink does, sine I can usually get about 3 months out of a printer before I have to give up and replace it. If one lasts longer than that it's a miracle. I plan on going through about 10 printers a year, it stinks. You can soak them in water for as long as you want to. If you don't have the print head cleaner from Icing Images get some, it definitely helps to clean the ink out better than water by itself. And force water through the nozzles using a squeeze bottle or syringe, that helps to get clogs out.
@renaeausburn99325 ай бұрын
Thank you. I’m actually out of the cleaner, so I’ll be ordering more tomorrow. Almost not worth the hassle of edible printing ☹️
@harmonywhalan48775 ай бұрын
@@Acaketoremember WHOA!! 10 printers a year? May I ask how many prints you get out of it before having to replace the whole printer? How many prints would you do in a day? I've had mine for so many years so now I'm curious!
@giaboni1236 ай бұрын
how do you remove nozzle from the printer?
@KaraBuntin6 ай бұрын
You have to remove the print head, which you can do on canon printers. Take the cartridges out, then pull up on the grey latch and pull the print head out from the back.
@YahyaKN6 ай бұрын
I’ll give this ago, I was just suprised I bought this and the first 15 pages were all like this lol, thanks
@sheetalbane79166 ай бұрын
Amazing! Just perfect, loved it.
@skysthelimit537 ай бұрын
What does it mean if all my pink images print red? Which color isn’t working? I bought a brand new Canon and it’s doing the same thing! Must be a cartridge right? Could it possibly be the cartridge connections not being read properly?
@Acaketoremember7 ай бұрын
So you're saying that you've had two printers do the same thing? I would look at the printer settings and adjust the magenta down on the printer, but depending on how that looks, it could be the computer that you're printing from. I think that one of my computers displays thigs differently than the other, and they print differently, too. If you adjust the color settings in the computer that might help.
@rachelhuntnevadalearningac55637 ай бұрын
I just bought the Canon ix6820 and have the Cranboly edible ink. The printer will not recognize it, even though I've unplugged the printer, held the reset button for 7 seconds, etc. Any advice?
@Acaketoremember7 ай бұрын
Ugh, I'm sorry about that. It could be the brand, I've never heard of it so I don't know it by reputation. I would get another set of cartridges from Icing Images and see if that works. It should, but if it does, I would get my money back from the first people!
@marymurray43527 ай бұрын
Thanks for this video! I am using a real cake between bottom and top dummies covered in fondant . I have made cake, ganache covered and frozen. This cake is for the couple to cut only NOT to be eaten as I made from a packet mix! could I fondant a week ahead so I can have the cake fully decorated in advance? (I have many sheet cakes to make also so trying to be organised). Thanks again.
@Acaketoremember7 ай бұрын
As long as you can refrigerate the real cake until you need it, you can fondant it ahead of time. If there's ganache in it it would need to be refrigerated, so that's the only thing to consider.
@marymurray43527 ай бұрын
@@Acaketoremember Thank you so much for your advice (and such a prompt reply)! 😘
@personalacc_579287 ай бұрын
Looks great! Where can I get this mould?
@Acaketoremember7 ай бұрын
Thanks for asking, I thought the site link was on here! It's available at acaketoremember.com/ols/products/small-sand-dollar-mold
@petesshelby53858 ай бұрын
It really worked!! Thank you! Had problem with canon printhead and edible ink. After cleaning it multiple times still.didnt get either magenta or blue or black. After dishwasher works like brand new!
@Acaketoremember7 ай бұрын
I'm glad it worked!
@Katya-zj7ni8 ай бұрын
Game changer for those pesky edges. Thank you 🙏 ❤
@Roddy19658 ай бұрын
This was helpful, thank you!!
@michellesmith21408 ай бұрын
Hello I have cleaned my printer head 4 times have did the cleaning about 6 time have did deep cleaning and still my cyan not printing I’m about to give up printer was doing fine until I put new cartridges in please help
@Acaketoremember8 ай бұрын
I'm sorry it took so long to answer, I thought that I'd answered this. Try one more time, rinse the printer head in hot water for 15 minutes until it looks like it's running clean, then soak it in printer head cleaning fluid for a couple of hours. Try forcing some of the fluid through the nozzles using a syringe and shooting it into the nozzles and through the vents on the back. After it's soaked for a couple of hours run hot water through it again for another 15 minutes, then let it dry out for an hour or so and put it back in the printer. Run a deep cleaning on it and see if it prints correctly. If it doesn't, it could be time for a new printer. I just had a printer do the same thing with the cyan not printing, and when I cleaned it the cyan printed but magenta didn't, and I couldn't get it to work, so I had to switch it out for a new printer, unfortunately.
Пікірлер
Thanks for tip❤
Hi. My printer isn't printing yellow. Tried deep cleaning. Opening vacuum, manual print head cleaning. Deep cleaning again. Still not printing. Any other thing I can try?
Try shooting hot water through the print head using a plunger syringe…. Sometimes the pressure will loosen whatever’s in there. If it 100% won’t print after all of that it might be time to replace the printer.
@KaraBuntin Tried it. Not sure how hot the water was though.
@KaraBuntinTutorials Don't have a dishwasher unfortunately 😕
@@KaraBuntinTutorials I'll give that a try. Thanks.
Been looking for this answer forever?!! Thank you
I'm glad I could help!
oh my god i owe you my life thank you so much 😭😭😭😭😭
This video has saved the lives of a lot of people!
How long do they last on either a buttercream or fondant cake. Can make my cake ahead?
Moisture will damage them, so if condensation forms on the cake when it's taken out of the fridge that can make them sag. If it's at room temperature then it's not going to be much of a problem.
@@Acaketoremember Thank you so my understanding I leave out of the fridge and will be ok the day before. I appreciate your help.
Thank you!
Thanks for watching!
Well spoken and illustrated from the photos. I appreciate your expertise.
Many thanks!
This is the truth. Cannot count how many printers I have been though over the years.
so many printers.....
Many factors to consider before buying tools and equipment. Great points to ponder!
Great information.
Thanks for watching!
Thank you!
You're welcome!
It probably helps that you do enough volume that you need multiple printers. You have a backup printer while you're fixing the other
I have to because they conk out randomly
Great info!
Thanks for watching!
Thank you.
You're welcome!
Great video!
Thanks!
Great video
Thanks for the visit
Great video
Thanks!
Thanks so much for all of these great tips related to edible ink printers, using local printers and cost saving methods for edible cake / food decor. This sort of reminds of whether or it is beneficial to purchase large format sublimation or DTF printers for the Decorated Apparel industry.
You are so welcome!
Thank you for this informative video. I found it very helpful.
Thanks for watching :)
Can you buy one and then leave a bad review explaining this is yours?
This makes me so mad. I never realized it had gotten so bad. But I also thought Amazon would do better. I really hope they can find a way to protect the artists and creators from all of this. Watermarks no longer work, nothing does now that we have AI. I just don't know what it will take but I hope they find a solution real soon.
Amazon has no reason to remove photos because even if they’re not accurate they bring traffic to the site. They don’t care as long as people buy something. It’s definitely frustrating.
@@Acaketoremember Oh I know! Amazon does not care about the seller and not a whole lot about the buyer either. I despise Amazon! I got approved for the influencer program and I just could not bring myself to help them prosper any more than they already do. Bezos is a greedy *** I hope things get better for you
😵💫 Crazy. Sad and crazy.
It's pretty common, unfortunately.
What if you actually bought the product that they are selling and then you leave a review with their product and comparison with your own product and basically in the review say that it’s copyright and infringement Amazon will not take this listing down because they have stolen my images I am the original creator, etc.
I've thought of doing that, but they would just steal more, and the review would get lost on Amazon after a while. They'd probably report the review and Amazon would take it down...They've stolen more of my photos and photos of other people, it's not just me. You have to decide whether you want to spend your time chasing these people down when they'll just do it again, or whether you want to worry about other things.
Maybe consider watermarking your images with the logo nstead of just relying on the small logo in the corner...
Watermarks can be removed really easily. I put the logo in the corner for brand recognition but i don’t expect it to stop people if they’re photo thief dirtbags.
i always write directly to the head of legal services when this happens to me (it hasnt on amazon but other large companies) and usually gets things escalated for action to be taken
I've filed the correct paperwork multiple times and amazon won't take the photos down. They tend to do shady things with listings in general, it's not just the photos.
It's so difficult for anyone in the creative community to make it now with the amount of theft taking place. Many years ago I used to sell handmade items at parks, fairs and to stores directly. Occasionally I would see people trying to copy an item but it was rare. Then sites like the ones you mention came in and all they care about is making a buck, no respect for artists at all. So thank you for the links to where I can buy from the artists themselves.
It's true, and it's definitely demoralizing when you see people buying things because they're cheap and justifying it by saying that you get "the same things" because the photos are the same.
I'm a handmade seller as well. My things are OOAK, and I was wondering if I should add my shop logo to all my listing photos, the first and second ones. I don't have as many sales as you, nor are my items as popular. But with this in mind, should I add my shop logo to my first and second photos?
I do because of branding so that people learn to see my logo. I don't do it for preventing photo theft because people steal them anyway. It's easy to remove logos no, I can do it in about five seconds using photoshop.
Hi-I just got my printer and put the cartridges in. My printer didn’t come with any instructions….do I do some kind of test print….and how do you clean them? I’d love to know as much as you do about this. I’ll be using mine for the wafer papers for the chocolate covered Oreos. Would appreciate any and all advice you can give. Thank you :)
Good luck! Set it up the normal way that you would use a regular printer, but use the food coloring ink. Do a test print to begin with, and if you have to do a basic cleaning to get the ink going do that. (that's in the maintenance section of the print controls.) Watch my other videos about how to clean the print heads, and make sure that you're printing something once a day, even if it's just a test print, to keep the ink going through the printer.
Getting ripped off totally sucks! AI is getting to be very scary...thank you for the heads up!
It is scary...I think there will probably be a lot of litigation about it soon, but it's going to be hard to control.
While I think that it’s wrong for someone stealing your photos or product ideas, I think you could look at it a different way too. You could be proud of your unique creation, that it’s good enough for it to be stolen. 🤷🏽♂️
That's really no consolation if people steal your work!
It's not really a consolation. I've definitely not bought listings because I've seen the same image across many different platforms and I just assume it's some machine made polyester made in China garbage and not something actually handmade.
That's the problem, it might very well be something junky. You just don't know.
I used to think this way, too. But if I'm a small seller who is dependent on word-of-mouth advertising, I certainly wouldn't want someone to call me out on an item I didn't make.
Wow I'm fixing to invest in a printer for editable papers. What brand or model do you recommend starting out with? I think you should maybe team up with the Printer Companies and make an ink head that is more manageable for cleaning and be better at printing. They never know what to fix unless people like you with so much experience tell them. TFS this!! New subbie btw!
The problem is the inks, not the print heads, apparently. The food coloring isn't the same consistency as real ink, so the magenta is thicker than normal ink and it clogs up more often. The black clogs too, because it's a mix of all of the colors so it has magenta in it.
Oops, I forgot to add to get a Canon printer, because you can remove the print heads from those, and a lot of other brands don't let you do that.
That answered all The questions I had for my next cake. Thank you so much!!
Happy to help!
Does this conditioner help prevent the condensation from bending the wafer paper once we remove from a fridge.?
Probably not 100%. Any moisture will make wafer curl. But the conditioner does make it slightly resistant to absorbing moisture directly, so it could help a little.
I love this video and a couple of others I have just watched. I love your honesty about the frustrations and mysteries you have with them. We have the same issues but I really thought it was because I was a bit of a technophobe! Thanks for the reassurances! I thought I was a sucker for replacing our printer because I just couldn't get the first one I'd ever tried working, now I feel better and am thinking about having a back up printer on hand!
Very very helpful
I understand the burner issues on glasstops. My glass top stove big burner is horrible but small front burner stays pretty consistent but it gets too hot on 5 for sugar gotta keep it on 4. So I bought a hotplate to fix the issues. I always wanted a glass top but now not sure that was a good idea since making candies.
The glass top is terrible!
So ow long can you soak a print head in water? Is overnight too long? Also, Magent!! Ugh! It’s the only one that ever gives an issue. I clean the printhead and works great. The very next day the pink is barely there. Cleaning daily is stupid. You mentioned magenta maybe sold from bad batch, is there a particular brand you trust? Icing images is where it came from.
It's not a bad batch at this point, they fixed that, but the magenta is thicker than the other ink, so it clogs faster. I've been having problems with the black ink recently, and I never did before. Black has magenta in it, so I think part of it could be that. It's REALLY aggravating. I did try a different ink brand and it did the exact same thing, so that didn't matter. I also think that the food coloring ink basically burns out the print head a lot faster than regular ink does, sine I can usually get about 3 months out of a printer before I have to give up and replace it. If one lasts longer than that it's a miracle. I plan on going through about 10 printers a year, it stinks. You can soak them in water for as long as you want to. If you don't have the print head cleaner from Icing Images get some, it definitely helps to clean the ink out better than water by itself. And force water through the nozzles using a squeeze bottle or syringe, that helps to get clogs out.
Thank you. I’m actually out of the cleaner, so I’ll be ordering more tomorrow. Almost not worth the hassle of edible printing ☹️
@@Acaketoremember WHOA!! 10 printers a year? May I ask how many prints you get out of it before having to replace the whole printer? How many prints would you do in a day? I've had mine for so many years so now I'm curious!
how do you remove nozzle from the printer?
You have to remove the print head, which you can do on canon printers. Take the cartridges out, then pull up on the grey latch and pull the print head out from the back.
I’ll give this ago, I was just suprised I bought this and the first 15 pages were all like this lol, thanks
Amazing! Just perfect, loved it.
What does it mean if all my pink images print red? Which color isn’t working? I bought a brand new Canon and it’s doing the same thing! Must be a cartridge right? Could it possibly be the cartridge connections not being read properly?
So you're saying that you've had two printers do the same thing? I would look at the printer settings and adjust the magenta down on the printer, but depending on how that looks, it could be the computer that you're printing from. I think that one of my computers displays thigs differently than the other, and they print differently, too. If you adjust the color settings in the computer that might help.
I just bought the Canon ix6820 and have the Cranboly edible ink. The printer will not recognize it, even though I've unplugged the printer, held the reset button for 7 seconds, etc. Any advice?
Ugh, I'm sorry about that. It could be the brand, I've never heard of it so I don't know it by reputation. I would get another set of cartridges from Icing Images and see if that works. It should, but if it does, I would get my money back from the first people!
Thanks for this video! I am using a real cake between bottom and top dummies covered in fondant . I have made cake, ganache covered and frozen. This cake is for the couple to cut only NOT to be eaten as I made from a packet mix! could I fondant a week ahead so I can have the cake fully decorated in advance? (I have many sheet cakes to make also so trying to be organised). Thanks again.
As long as you can refrigerate the real cake until you need it, you can fondant it ahead of time. If there's ganache in it it would need to be refrigerated, so that's the only thing to consider.
@@Acaketoremember Thank you so much for your advice (and such a prompt reply)! 😘
Looks great! Where can I get this mould?
Thanks for asking, I thought the site link was on here! It's available at acaketoremember.com/ols/products/small-sand-dollar-mold
It really worked!! Thank you! Had problem with canon printhead and edible ink. After cleaning it multiple times still.didnt get either magenta or blue or black. After dishwasher works like brand new!
I'm glad it worked!
Game changer for those pesky edges. Thank you 🙏 ❤
This was helpful, thank you!!
Hello I have cleaned my printer head 4 times have did the cleaning about 6 time have did deep cleaning and still my cyan not printing I’m about to give up printer was doing fine until I put new cartridges in please help
I'm sorry it took so long to answer, I thought that I'd answered this. Try one more time, rinse the printer head in hot water for 15 minutes until it looks like it's running clean, then soak it in printer head cleaning fluid for a couple of hours. Try forcing some of the fluid through the nozzles using a syringe and shooting it into the nozzles and through the vents on the back. After it's soaked for a couple of hours run hot water through it again for another 15 minutes, then let it dry out for an hour or so and put it back in the printer. Run a deep cleaning on it and see if it prints correctly. If it doesn't, it could be time for a new printer. I just had a printer do the same thing with the cyan not printing, and when I cleaned it the cyan printed but magenta didn't, and I couldn't get it to work, so I had to switch it out for a new printer, unfortunately.
Love that I’m still learning new things!!!!