Change that head on the VW bus and you could make a ROTB wheel jack 5:27 just a suggestion
@wafflemaster-vb5hb2 ай бұрын
what size did you print the optimus at? i have a bambu lab P1P and don't know what size to set it at.
@TalmageMadsenАй бұрын
I scaled the file by 1000% in the slicer. I don't know necessarily what size that makes it.
@saberboy65072 ай бұрын
When are you going to make another and please make Optimus prime for the TOYBOX 3-D printer Your cousin Luke
@TalmageMadsenАй бұрын
Hey, you can try printing this: www.make.toys/custom-toy-view/?toyId=gsQkMBxfrXYZTqwjF I can't guarantee it will work because the Toybox printer has a relatively small build volume, which means that this transformer was scaled down to 50% size to fit on the build plate. This might cause the transformer's joints to be too stiff, or even cause them to fuse, so printing it will definitely be an experiment! I also uploaded this: www.make.toys/custom-toy-view/?toyId=2Dht32SDZrN5tp8Cb This will be an even more challenging print, and I had to scale it down to 90% size to get it to fit. Try the first one first and if you are successful, give this second one a try!
@saberboy6507Ай бұрын
Thank you
@saberboy6507Ай бұрын
Can you make soundwave
@steviebrown74783 ай бұрын
Great job.. do you make toys on the side
@TalmageMadsen3 ай бұрын
Nope. Just for fun!
@steviebrown74783 ай бұрын
Are you still 3D printing
@TalmageMadsen3 ай бұрын
Yes 👀
@steviebrown74783 ай бұрын
@@TalmageMadsen could you possibly build me a set of robots toys I have in mind I've been looking for this set for a while now I don't think they made it with 3 robots yet but seen the full mode on Amazon but they don't separate like the TV show... okay have you heard of the great dangaioh they have the toy set from the first dangaioh show but don't have it for the second dangaioh there 3 robots set turns into one check out the TV show called the great dangaioh let me know if you can build this team.....if you can... name your price I really want this set.... thanks for your response 😊
@casualcombine3 ай бұрын
Cant believe I'm just finding this now, great work!
@TravTrevTV4 ай бұрын
Will you paint them
@TalmageMadsen4 ай бұрын
Nope, but if you go on Cults or Thingiverse, others have, and they look great!
@akiliinstitute68194 ай бұрын
Mind making a CAD modeling tutorial?
@Outrjs7 ай бұрын
Making accessories for , say, MP Series. Swords, shields, armor. Pretty cool
@BrickChick8 ай бұрын
I really wanna make a dumb project , a 3d printed Transformer that looks like it's a Transformer made of legos , studs and all.
@user-ug6jj8ue1p8 ай бұрын
Can you leave a link to the others?
@TalmageMadsen5 ай бұрын
They're all on Thingiverse or Cults published by the same user: www.thingiverse.com/dabombdiggity/designs
@blimbam8 ай бұрын
Nice video! i like your pablo/voltswagon design, and you should do soundwave
@TalmageMadsen5 ай бұрын
Soundwave is definitely on my list, but since there are already a lot of great 3d printed Soundwave designs out there, I don't feel a lot of pressure to get around to him right now.
@myang120038 ай бұрын
If you use ABS, would this 3D printed optimus prime’s joints be tighter? Because I only have PLA and he was loose when I used PLA.
@TalmageMadsen8 ай бұрын
He's designed to be loose. Its a fine line between fused/stuck parts and loose joints when it comes to print in place parts. Optimus in particular is meant to be printed on all levels of printers, from dialed to relatively sloppy, so his loose joints are a result of that. You could maybe try different scaling or (like you suggested) a different material to experiment with tighter joints.
@elnetcho9 ай бұрын
wish i had a good 3d printed :(, i have been trying to print these for some months now but i only have the k7 3d printed as it was the only one i could afford :( the parts always glue together and when i try to separate them they break, even tho it is at the right size or a little bit bigger, i also tryed printing a snap together figure like mini 13 so it could fit in one print, the pieces always broke even tho i printed it a lil bigger, does any of you know a way so i could print cool action figures? (sorry for my bad spelling im spanish)
@TalmageMadsen9 ай бұрын
Maybe try experimenting with different filaments. The printer is important but a better filament or better infill could help where the printer lacks.
@Cheeseshitzszinc9 ай бұрын
It looks like the first Optimus prime toy
@user-mo1ms4st3j10 ай бұрын
Then it hit me. (Starscream suddenly gets hit by a block of energon)
@bearnaff938710 ай бұрын
Don't knock Bumbletrain - The eventual story of that poor brainwashed robot was kinda awesome. (IDW eventually decided that Hearts of Steel was a LARP organized by the real Shockwave (not the 19th century boat) to see if the various personalities of the bots involved were part of the reason for the war or some shit. The HoS bots were unconnected cybertronians who were fighting one another, but Shockwave replaced their personalities with ones of his own invention. In the IDW continuities, life is what happens when Shockwave is making other plans.
@TalmageMadsen10 ай бұрын
Haha I think Centurion is a pretty cool character as well. I honestly forgot I made that joke in the video. Mostly just the absurdity of picking on 'train Bumblebee' for no particular reason sounded funny to me.
@vertwheelerteku4611 ай бұрын
You basically made updated g1 one looks
@everydaywithpam296411 ай бұрын
In the " optimum pride" meme, the guy there actually swears in filipino
@MCS_Mr.Malice Жыл бұрын
Bro predicted Pablo.
@zairalexandercordoba Жыл бұрын
can you make weapons for optimus?
@waltercollier6485 Жыл бұрын
Cool
@Dashbr0 Жыл бұрын
you gotta make a 3d printable starscream, the original design is best for it I think.
@ShavayD Жыл бұрын
May i suggest you do some weapons? I think Inferno's flame gun from Beast Wars looks amazing and it would be really cool to see you do that
@bimbojimbo7101 Жыл бұрын
Cool 3d models, really appreciate you not charging for them and the effort you put into these things.
@SerdarAtiEge Жыл бұрын
Klifsampa soweijft te 1918 muwi ju sörk 😡🤬
@tf_geeks Жыл бұрын
could you make a version that has a live-action head that would make it perfect for me
@TalmageMadsen Жыл бұрын
Luckily for you there's an easy way to do that! Give Meshmixer a try 😉
@homaplaytop4564 Жыл бұрын
Amaizing
@Howza_the_lego_guy7784 Жыл бұрын
Printing this now it’s amazing
@bearnaff9387 Жыл бұрын
I've seen quite a few 3D printed TF models before. Hell, I have the literal first print of the first 3D printed transformer in a box around my house somewhere. I have not seen someone attempt and succeed at a whole series of print-in-place TF toys before. Your work is a triumph in both Transformer 3D printing and print-in-place design. You rock!
@TalmageMadsen Жыл бұрын
Man that is some of the nicest praise I've ever gotten. I really get a kick out of making these, each one is like it's own little puzzle to create, and I'm quite fond of transformers. That's probably why I've made so many!
@unwantedbeing356 Жыл бұрын
You should make one of the transformers that all turn into one big one
@TalmageMadsen Жыл бұрын
It would be ambitious and very difficult to make it stable due to the looseness of print-in-place joints, but it could perhaps be accomplished with some kind of compliant mechanism or ratchet.
@TrueSavage555 Жыл бұрын
I love how you homaged Bayverse Brawl with the other tank robot's head
@Emoconsan Жыл бұрын
I really love too learn 3d printing 🤩
@jessekund6574 Жыл бұрын
I had a really big problem with mine... the shoulders broke off the moment I took him off the build plate, I also did end up needing supports.
@TalmageMadsen Жыл бұрын
Despite being an obvious weak point in the design, in all of the test prints I did, the only issues I had with the shoulders were the joints fusing and not with layer adhesion. I think it may just be a difference in the slicers and printers that caused your print to fail. Tolerances are tight, so what worked on my setup may not work the same way on yours. Hopefully the print with supports solved the issue!
@jessekund6574 Жыл бұрын
@@TalmageMadsen I'll try to fix it later, thanks for letting me know though
@user-ff4yr5mx5e Жыл бұрын
I hope Michael Bay will notice you, and they will make a new movie with your designs.
@SilverScarletSpider Жыл бұрын
Windblade is super cool. I wonder how her sister/rival Slipstream would look. Nightbird could be an interesting design challenge in making a female transformer that turns into a Nissan Skyline GTR R33 considering most non exotic earth cars turn into bulky men
@crazyhyperboy Жыл бұрын
I appreciate this video.trying to get into making my own transformer upgrades for figures and eventually making my own transformer
@Limey8108 Жыл бұрын
I have a small question, how are you able to model the face in inventor? Is it possible to do a face in blender and upload it into inventor?
@TalmageMadsen Жыл бұрын
You could probably do it in meshmixer or something. I just model faces like any other inventor part. It's kind of jank but they're so small that most fdm printers can't really resolve them anyways.
@AdamIanBridges64 Жыл бұрын
Where can i buy?
@TalmageMadsen Жыл бұрын
You can download the .stl file for free at www.thingiverse.com/thing:5338124
@spencergellsworth Жыл бұрын
That's really cool! I could see that as a circa-1989 G1 toy
@MrBruh-yb9qi Жыл бұрын
Wheeljack from ROTB be like
@TalmageMadsen Жыл бұрын
Ayooo bro they did him dirty 😂. Low-key thinking of maybe doing a slight remodel to make him screen accurate sometime in the future tho
@nothankyou9733 Жыл бұрын
@@TalmageMadsen first thing I did since I saw the promos was paint up a Kombitron like him
@i_docustomsforfun11 ай бұрын
@@TalmageMadsenyou predicted wheeljack😮
@JameseekinGG Жыл бұрын
A cute little jeep swindle
@nicholasd9756 Жыл бұрын
Awesome!!
@ivanabellano3438 Жыл бұрын
Make starscream
@TalmageMadsen Жыл бұрын
He's on my list. In the mean time, check out www.thingiverse.com/thing:4931769/makes by TigerKobal
@LewisWrAllison Жыл бұрын
Will you ever paint them?
@TalmageMadsen Жыл бұрын
Nope
@saberboy6507Ай бұрын
My sister can
@darkspider3050 Жыл бұрын
I printed it and the leg and chest fuses together what did I do wrong
@TalmageMadsen Жыл бұрын
I never had issues with the legs in any of my test prints, so I was not aware that this was a potentially troublesome area. Did you print at the right layer height (0.15mm)?
@kasualtoycollector Жыл бұрын
amazing work!! subbed!
@kalobhunt9001 Жыл бұрын
I wanna 3-d print stuff so bad but I have no clue how to make the items or anything I’m guessing the program you just gotta make stuff fit idk maybe you should do some tutorials also yours don’t seem to have the lines
@TalmageMadsen Жыл бұрын
To 3D print something is fairly straightforward. Once the printer is set up (this can be easy or fairly difficult depending on the printer model, but they have improved a lot over the years), you find a 3D file you want to print, put in a program called a slicer that makes your file into the same computer language your printer uses, and then put the sliced file (now called gcode) into your printer to print. If you are thinking of designing your own models, consider this: to design something in 3D can be a more diverse process that can be done through a number of programs. Fusion 360 is a great free option, as well as TinkerCad for beginners. There are also 3D sculpting softwares that are better for designing characters and terrain, as opposed to parts and mechanisms. Just depends on what you want to do. It will probably take a lot of practice whatever approach you decide to take.
@kalobhunt9001 Жыл бұрын
@kianzky 316 I don’t yet.
@TalmageMadsen Жыл бұрын
@kianzky 316 I actually don't have a 3d printer. Right now I use a printer available to me at the university I attend. Before that I used one through my highschool. My advice if you want something printed and you don't live way out in the boonies is just to look for a 3D printer managed by some institution that lets you pay a small fee for material (and sometimes time) for the print. Schools, libraries, universities, and maker spaces are all locations that would likely have available printers. Hopefully most of them aren't gonna be exclusive to students or anything either (I know my university's printer isn't exclusive).
@TalmageMadsen Жыл бұрын
@kianzky 316 nahhh not even haha. Just doing what I gotta do and being lucky there's a place to do it.
Пікірлер
Change that head on the VW bus and you could make a ROTB wheel jack 5:27 just a suggestion
what size did you print the optimus at? i have a bambu lab P1P and don't know what size to set it at.
I scaled the file by 1000% in the slicer. I don't know necessarily what size that makes it.
When are you going to make another and please make Optimus prime for the TOYBOX 3-D printer Your cousin Luke
Hey, you can try printing this: www.make.toys/custom-toy-view/?toyId=gsQkMBxfrXYZTqwjF I can't guarantee it will work because the Toybox printer has a relatively small build volume, which means that this transformer was scaled down to 50% size to fit on the build plate. This might cause the transformer's joints to be too stiff, or even cause them to fuse, so printing it will definitely be an experiment! I also uploaded this: www.make.toys/custom-toy-view/?toyId=2Dht32SDZrN5tp8Cb This will be an even more challenging print, and I had to scale it down to 90% size to get it to fit. Try the first one first and if you are successful, give this second one a try!
Thank you
Can you make soundwave
Great job.. do you make toys on the side
Nope. Just for fun!
Are you still 3D printing
Yes 👀
@@TalmageMadsen could you possibly build me a set of robots toys I have in mind I've been looking for this set for a while now I don't think they made it with 3 robots yet but seen the full mode on Amazon but they don't separate like the TV show... okay have you heard of the great dangaioh they have the toy set from the first dangaioh show but don't have it for the second dangaioh there 3 robots set turns into one check out the TV show called the great dangaioh let me know if you can build this team.....if you can... name your price I really want this set.... thanks for your response 😊
Cant believe I'm just finding this now, great work!
Will you paint them
Nope, but if you go on Cults or Thingiverse, others have, and they look great!
Mind making a CAD modeling tutorial?
Making accessories for , say, MP Series. Swords, shields, armor. Pretty cool
I really wanna make a dumb project , a 3d printed Transformer that looks like it's a Transformer made of legos , studs and all.
Can you leave a link to the others?
They're all on Thingiverse or Cults published by the same user: www.thingiverse.com/dabombdiggity/designs
Nice video! i like your pablo/voltswagon design, and you should do soundwave
Soundwave is definitely on my list, but since there are already a lot of great 3d printed Soundwave designs out there, I don't feel a lot of pressure to get around to him right now.
If you use ABS, would this 3D printed optimus prime’s joints be tighter? Because I only have PLA and he was loose when I used PLA.
He's designed to be loose. Its a fine line between fused/stuck parts and loose joints when it comes to print in place parts. Optimus in particular is meant to be printed on all levels of printers, from dialed to relatively sloppy, so his loose joints are a result of that. You could maybe try different scaling or (like you suggested) a different material to experiment with tighter joints.
wish i had a good 3d printed :(, i have been trying to print these for some months now but i only have the k7 3d printed as it was the only one i could afford :( the parts always glue together and when i try to separate them they break, even tho it is at the right size or a little bit bigger, i also tryed printing a snap together figure like mini 13 so it could fit in one print, the pieces always broke even tho i printed it a lil bigger, does any of you know a way so i could print cool action figures? (sorry for my bad spelling im spanish)
Maybe try experimenting with different filaments. The printer is important but a better filament or better infill could help where the printer lacks.
It looks like the first Optimus prime toy
Then it hit me. (Starscream suddenly gets hit by a block of energon)
Don't knock Bumbletrain - The eventual story of that poor brainwashed robot was kinda awesome. (IDW eventually decided that Hearts of Steel was a LARP organized by the real Shockwave (not the 19th century boat) to see if the various personalities of the bots involved were part of the reason for the war or some shit. The HoS bots were unconnected cybertronians who were fighting one another, but Shockwave replaced their personalities with ones of his own invention. In the IDW continuities, life is what happens when Shockwave is making other plans.
Haha I think Centurion is a pretty cool character as well. I honestly forgot I made that joke in the video. Mostly just the absurdity of picking on 'train Bumblebee' for no particular reason sounded funny to me.
You basically made updated g1 one looks
In the " optimum pride" meme, the guy there actually swears in filipino
Bro predicted Pablo.
can you make weapons for optimus?
Cool
you gotta make a 3d printable starscream, the original design is best for it I think.
May i suggest you do some weapons? I think Inferno's flame gun from Beast Wars looks amazing and it would be really cool to see you do that
Cool 3d models, really appreciate you not charging for them and the effort you put into these things.
Klifsampa soweijft te 1918 muwi ju sörk 😡🤬
could you make a version that has a live-action head that would make it perfect for me
Luckily for you there's an easy way to do that! Give Meshmixer a try 😉
Amaizing
Printing this now it’s amazing
I've seen quite a few 3D printed TF models before. Hell, I have the literal first print of the first 3D printed transformer in a box around my house somewhere. I have not seen someone attempt and succeed at a whole series of print-in-place TF toys before. Your work is a triumph in both Transformer 3D printing and print-in-place design. You rock!
Man that is some of the nicest praise I've ever gotten. I really get a kick out of making these, each one is like it's own little puzzle to create, and I'm quite fond of transformers. That's probably why I've made so many!
You should make one of the transformers that all turn into one big one
It would be ambitious and very difficult to make it stable due to the looseness of print-in-place joints, but it could perhaps be accomplished with some kind of compliant mechanism or ratchet.
I love how you homaged Bayverse Brawl with the other tank robot's head
I really love too learn 3d printing 🤩
I had a really big problem with mine... the shoulders broke off the moment I took him off the build plate, I also did end up needing supports.
Despite being an obvious weak point in the design, in all of the test prints I did, the only issues I had with the shoulders were the joints fusing and not with layer adhesion. I think it may just be a difference in the slicers and printers that caused your print to fail. Tolerances are tight, so what worked on my setup may not work the same way on yours. Hopefully the print with supports solved the issue!
@@TalmageMadsen I'll try to fix it later, thanks for letting me know though
I hope Michael Bay will notice you, and they will make a new movie with your designs.
Windblade is super cool. I wonder how her sister/rival Slipstream would look. Nightbird could be an interesting design challenge in making a female transformer that turns into a Nissan Skyline GTR R33 considering most non exotic earth cars turn into bulky men
I appreciate this video.trying to get into making my own transformer upgrades for figures and eventually making my own transformer
I have a small question, how are you able to model the face in inventor? Is it possible to do a face in blender and upload it into inventor?
You could probably do it in meshmixer or something. I just model faces like any other inventor part. It's kind of jank but they're so small that most fdm printers can't really resolve them anyways.
Where can i buy?
You can download the .stl file for free at www.thingiverse.com/thing:5338124
That's really cool! I could see that as a circa-1989 G1 toy
Wheeljack from ROTB be like
Ayooo bro they did him dirty 😂. Low-key thinking of maybe doing a slight remodel to make him screen accurate sometime in the future tho
@@TalmageMadsen first thing I did since I saw the promos was paint up a Kombitron like him
@@TalmageMadsenyou predicted wheeljack😮
A cute little jeep swindle
Awesome!!
Make starscream
He's on my list. In the mean time, check out www.thingiverse.com/thing:4931769/makes by TigerKobal
Will you ever paint them?
Nope
My sister can
I printed it and the leg and chest fuses together what did I do wrong
I never had issues with the legs in any of my test prints, so I was not aware that this was a potentially troublesome area. Did you print at the right layer height (0.15mm)?
amazing work!! subbed!
I wanna 3-d print stuff so bad but I have no clue how to make the items or anything I’m guessing the program you just gotta make stuff fit idk maybe you should do some tutorials also yours don’t seem to have the lines
To 3D print something is fairly straightforward. Once the printer is set up (this can be easy or fairly difficult depending on the printer model, but they have improved a lot over the years), you find a 3D file you want to print, put in a program called a slicer that makes your file into the same computer language your printer uses, and then put the sliced file (now called gcode) into your printer to print. If you are thinking of designing your own models, consider this: to design something in 3D can be a more diverse process that can be done through a number of programs. Fusion 360 is a great free option, as well as TinkerCad for beginners. There are also 3D sculpting softwares that are better for designing characters and terrain, as opposed to parts and mechanisms. Just depends on what you want to do. It will probably take a lot of practice whatever approach you decide to take.
@kianzky 316 I don’t yet.
@kianzky 316 I actually don't have a 3d printer. Right now I use a printer available to me at the university I attend. Before that I used one through my highschool. My advice if you want something printed and you don't live way out in the boonies is just to look for a 3D printer managed by some institution that lets you pay a small fee for material (and sometimes time) for the print. Schools, libraries, universities, and maker spaces are all locations that would likely have available printers. Hopefully most of them aren't gonna be exclusive to students or anything either (I know my university's printer isn't exclusive).
@kianzky 316 nahhh not even haha. Just doing what I gotta do and being lucky there's a place to do it.