One hour to snap build?! I need to get on your level. Just started building this year.
@DS9128410 күн бұрын
Nice job, respect 👍
@Imjudah-14 күн бұрын
I wish they did more stocky designs, good video
@chickennugget944327 күн бұрын
Geez man too much whining throughout the video
@comradegunpla27 күн бұрын
Funny thing to say for someone who’s whining about a KZread video
@chickennugget944327 күн бұрын
@@comradegunpla LoL which part of my very short sentence gave such vibe
@comradegunpla27 күн бұрын
@@chickennugget9443 that entire short comment is whining lmao, what do you think whining is
@chickennugget944327 күн бұрын
@@comradegunpla whining = you 😇😆😂
@comradegunpla27 күн бұрын
@@chickennugget9443 imagine getting so mad for a model kit lmao
@AndreiOrzal-ue7luАй бұрын
thats my favorite gundam
@memoktcАй бұрын
What paints you used for this kit?
@comradegunplaАй бұрын
not sure, usually a mix of mr color and gaia
@GiantRoboloveАй бұрын
I like how you casually drop so much knowledge in your voice overs. That's some really good results in this short amount of time. Shows that you know your craft. Good luck with the move bro!
@PRAETOR1ANOАй бұрын
Great work, what paint you use? Thx
@comradegunplaАй бұрын
Mostly Mr color
@PRAETOR1ANOАй бұрын
@@comradegunpla lacquer or acrylic?
@PRAETOR1ANOАй бұрын
@@comradegunpla I have a problem with the paint, it doesn't stick well. How is your model doing with this?
@comradegunplaАй бұрын
@@PRAETOR1ANO lacquer, and it should stick well enough. I don’t really want to troubleshoot in the comments, check the description in my newest video for a link to our community discord where you can discuss things with me
@JlNNKAZAMAАй бұрын
With that quality you should at least have 100k. You earned a new sub keep it up bro🙏🏻
@thedandy6765Ай бұрын
would it be possible for you to link that sdark video i cant seem to find it
@comradegunplaАй бұрын
kzread.info/dash/bejne/jGpnqsSEf8uunLw.html
@windslayerr11Ай бұрын
If you're gonna cut the wings, you should make it moveable instead of just gluing it back at a different angle.
@comradegunplaАй бұрын
Brother how would I even go about doing that
@windslayerr11Ай бұрын
@@comradegunpla make a hinge out of plastic plate and glue it to the cut wing. Hollow out parts of the uncut wing and the grey piece to make room for the new hinge.
@comradegunplaАй бұрын
@@windslayerr11 do you see how little space there is? The wing is designed as one flat part. Show me an example of anyone making a hinge out of these wings.
@windslayerr11Ай бұрын
@@comradegunpla I’d show you my own build but I can’t post pictures here. There are couple examples on bilibili. That’s where I got the idea from.
@windslayerr11Ай бұрын
I wonder if KZread deleted my comments... You won't find any examples in the English gunpla community. You'll have to search it up in the Chinese community.
@phantomzero906Ай бұрын
I would have never thought to use the included stickers as a masking alternative
@nathanemmanuel8165Ай бұрын
Excellent work comrade
@meja_alas_koranАй бұрын
very helpfull tutorial! Thank you so much
@theguy2452Ай бұрын
Your style is really elegant and creates beautiful outcomes while also being very straightforward. It reminds me of Bunker Pla’s stylish technique videos. This kit came out great, very clean
@SeiferTanАй бұрын
🤩
@branchygiraffeАй бұрын
What size chisel do you use for scribing? I went to buy one but there’s a bunch of different sizes so I didn’t know which one to get
@comradegunplaАй бұрын
For this one, I didn't add any panel lines, only went over the existing corners, for that you'd want something thin, either a round needle type or around 1mm. If you want to actually scribe new lines, for HGs I would suggest 1.5mm for normal lines, 3mm for thick line variations. For MGs I would have 2mm and 4mm. Maybe just start with something from 1~1.5mm and see how much you like it.
@23edsaАй бұрын
Do you use laquer paints? If yes, how do you ventilate your spray booth?
@comradegunplaАй бұрын
Yes, and I just use a $100 spray booth I got from Amazon. I did build a booth for about $50 once for a video, it was a functional booth but it could have been better, so I want to build another one after I finish moving for a better tutorial.
@johnnymechahandАй бұрын
I don’t know if I can focus that well to finish a kit that quick. Lol. Excellent results man. Love the burnt titanium. Shading was excellent as well.👌
@JuLVideosАй бұрын
That gatling gun looks sick!! 😱
@MechaBorneАй бұрын
No primer?! 😮 lol turned out gorgeous, the heat tempering effect on the gun is perfect.
@comradegunplaАй бұрын
There is primer lmao, I just don't film that step. Check out the part at 11:35, I'm painting on grey primer.
@MechaBorneАй бұрын
Ooooooo 😂
@fieldkaijuАй бұрын
This kit look like an Armored Core model, have you ever built one ? They got restocked recently, and while they aren't that well design, at the very least they're absolutely beautiful and they have some very odd design that is very lacking when it comes to Gundam, X-Sombrero and TYPE-LAHIRE comes to mind especially, but even the Armored Core V stuff is so unique. Beautiful kit as always, and it's very impressive what you can do with so little time, I can't believe you're not more popular, because the work is top notch
@comradegunplaАй бұрын
I've seen them, but tbh I just kind of dislike Kotobukiya kits and want to avoid them as much as possible, unless it's an IP I really like. Bandai announced Armored Core kits a while ago, so once those come in stock I might pick a few up.
@GilearTheChosenOneАй бұрын
I really dig your style of painting. It never would have occurred to me to shade the kits that way. It had become pretty much second nature to me to either black base and highlight or to preshade with a darker color and then base coat. Nicely done! Great job on the video as well. Your breakdown and workflow is helpful in showing what you’re doing and how you achieved the results.
@comradegunplaАй бұрын
Preshading is good too if you want that high contrast, I’m just going for a more subtle look. Preshading tends to kill the vibrancy of colors since you are introducing black into colors, but it’s great if you weather. Different techniques for different goals!
@springcanАй бұрын
THIS IS FUCKIN LIT!! LOVED THE BURNT TITANIUM. Also wondering if you considered going permet overload? (purple)
@comradegunplaАй бұрын
Kind of forgot that was even a thing, lmao. Maybe!
@NSargeАй бұрын
Surprise video, nice! I'm glad you got a fun, easy build after the Rising Freedom. The advice about sandpaper/sponge rigidity and re-scribing were actually things that I learned experimentally recently, so it was nice to see my thoughts confirmed here. The kit looks great, as always, definitely more vibrant and visually interesting than the stock colors (and I'm always a sucker for barrel/thruster burn). If there's one thing I could note it's that the BGM is a bit loud, most notably in the painting section IMO. But as always, thanks for the video! and good luck with the rest of the move.
@comradegunplaАй бұрын
noted, will decrease the volume more next time
@MESIRlXАй бұрын
@@comradegunplaYeah, I think your audio ducking just needs to be a bit stronger
@back_dashАй бұрын
Oh, let's go! I thought you have your hands full with the potential Immortal Justice and Force Impulse/Gouf. So I didn't expect any WfM builds from you for some time. But at this point I really want to see what you can do with the Calibarn or Gundvolva. (I will be glad with any WfM build tho) P. S. is that some shade of metallic red or is it a copper color for the shell unit? It looked so good without the clear part! I always forget they are a little bit smoky, not perfectly clear.
@comradegunplaАй бұрын
oh, the clear part is on it. It's just metallic red underneath and the smoky clear part turns it a little darker, I guess
@back_dashАй бұрын
@@comradegunpla yeah, I was referring to the moment around 13:29, when it wasn't covered with clear part yet. Maybe it's just lighting, but it looks hella good. You didn't mention it in the video, but I guess all the permet system elements glow under the UV light? Same as all your previous WfM builds?
@comradegunplaАй бұрын
@@back_dash this one actually doesn't 😥I wanted the permet marks to look metallic since they are so large, which requires me to use clear red instead of a fluorescent red. I'm getting some fluorescent clear paints shipping in from China, so hopefully I can fix this to have it glow like all my other ones in the future.
@back_dashАй бұрын
@@comradegunpla oh no. hope it can be fixed. Any plans for the brown chicken by any chance? Since you already have Ur, and 3 main boys completed. I can kinda see some sense in completing 2 girls too. Can't believe I'm saying it, but even Thorn's design grew on me over time. Then again, I will be happy with any build from you, king. Do what you like and thanks for the nice vid!
@pero02review47Ай бұрын
i wish rising freedom had the same height as other hg freedom mostly Strike Freedom. it was too short 😣 i wish there is a simple way to improve this kit height without need to cut/add on or repaint just for the sake of make the cuatom kit color same..
@henryguan3676Ай бұрын
When extending the thighs, do you extend the inner frame as well? Thanks
@comradegunplaАй бұрын
Not for this build specifically because 3mm is just enough for the inner frame to still work. Any longer than that, you might have to either extend the inner frame, or extend the hip joint peg (which I think is easier)
@henryguan3676Ай бұрын
@@comradegunpla thank you so much
@septikkvoidАй бұрын
Is that a mini gun barrel
@comradegunplaАй бұрын
Yep!
@aarons9961Ай бұрын
No pink at the end?
@comradegunplaАй бұрын
is there supposed to be?
@SirRubinMaDaec2 ай бұрын
Looks absolutely sick dude
@YuseiFudo_17742 ай бұрын
Idk why, but I just love the look of this kit. I can’t wait to build mine, but I’m a bit scared of the arm and leg joints breaking on me as I’ve heard quite a few stories about the connections breaking after time. Since the kit is kinda cheap I can always buy a new one to replace the broken joints.
@nilsirrah767221 күн бұрын
Na, this kit is durable
@chuy38402 ай бұрын
Why does the paint look textured? Could it be that it is not thin enough and it dries as tiny particles instead of one even layer? I like the colors but the texture throws off the look of smooth oxidized titanium.
@comradegunpla2 ай бұрын
Could be. I thinned these clears a while ago so they could have dried up a bit. The silver base is also not as chrome-y so that might be the reason too, after all clear paint can only look as smooth as the base. I originally wanted to do all matte for this build, so I didn't think to make the silver super mirror-y, only thought to do this burnt titanium halfway through.
@glennecoy2 ай бұрын
First hg barbie I've seen that looks like the mg. I'm subbing to you man 🔥
@Dreg02 ай бұрын
your taste in audio is shitty
@BunchyKitten2 ай бұрын
Awesome content.
@sorafromgenshin2 ай бұрын
after watching ibo as my first gundam anime, i want to be gunpla nerd too 😂
@ShinetoZeroX2 ай бұрын
Excellent review, the Gundam Pharact And Elan Ceres, where probably some of the best parts of the series and it actually showed that they had a glimmer of an idea For the series, but Then the series just Straight up crashed And burned. That's a lesson to everyone. Let your show cook A little longer,
@StrikeWEE2 ай бұрын
was finding how to paint 'PBandai Titanium White', and found this video
@IrfanNeko2 ай бұрын
Honestly your videos' vibes are super chill and i can binge watching all of them without feeling fatigue!
Пікірлер
best HG kit so far
One hour to snap build?! I need to get on your level. Just started building this year.
Nice job, respect 👍
I wish they did more stocky designs, good video
Geez man too much whining throughout the video
Funny thing to say for someone who’s whining about a KZread video
@@comradegunpla LoL which part of my very short sentence gave such vibe
@@chickennugget9443 that entire short comment is whining lmao, what do you think whining is
@@comradegunpla whining = you 😇😆😂
@@chickennugget9443 imagine getting so mad for a model kit lmao
thats my favorite gundam
What paints you used for this kit?
not sure, usually a mix of mr color and gaia
I like how you casually drop so much knowledge in your voice overs. That's some really good results in this short amount of time. Shows that you know your craft. Good luck with the move bro!
Great work, what paint you use? Thx
Mostly Mr color
@@comradegunpla lacquer or acrylic?
@@comradegunpla I have a problem with the paint, it doesn't stick well. How is your model doing with this?
@@PRAETOR1ANO lacquer, and it should stick well enough. I don’t really want to troubleshoot in the comments, check the description in my newest video for a link to our community discord where you can discuss things with me
With that quality you should at least have 100k. You earned a new sub keep it up bro🙏🏻
would it be possible for you to link that sdark video i cant seem to find it
kzread.info/dash/bejne/jGpnqsSEf8uunLw.html
If you're gonna cut the wings, you should make it moveable instead of just gluing it back at a different angle.
Brother how would I even go about doing that
@@comradegunpla make a hinge out of plastic plate and glue it to the cut wing. Hollow out parts of the uncut wing and the grey piece to make room for the new hinge.
@@windslayerr11 do you see how little space there is? The wing is designed as one flat part. Show me an example of anyone making a hinge out of these wings.
@@comradegunpla I’d show you my own build but I can’t post pictures here. There are couple examples on bilibili. That’s where I got the idea from.
I wonder if KZread deleted my comments... You won't find any examples in the English gunpla community. You'll have to search it up in the Chinese community.
I would have never thought to use the included stickers as a masking alternative
Excellent work comrade
very helpfull tutorial! Thank you so much
Your style is really elegant and creates beautiful outcomes while also being very straightforward. It reminds me of Bunker Pla’s stylish technique videos. This kit came out great, very clean
🤩
What size chisel do you use for scribing? I went to buy one but there’s a bunch of different sizes so I didn’t know which one to get
For this one, I didn't add any panel lines, only went over the existing corners, for that you'd want something thin, either a round needle type or around 1mm. If you want to actually scribe new lines, for HGs I would suggest 1.5mm for normal lines, 3mm for thick line variations. For MGs I would have 2mm and 4mm. Maybe just start with something from 1~1.5mm and see how much you like it.
Do you use laquer paints? If yes, how do you ventilate your spray booth?
Yes, and I just use a $100 spray booth I got from Amazon. I did build a booth for about $50 once for a video, it was a functional booth but it could have been better, so I want to build another one after I finish moving for a better tutorial.
I don’t know if I can focus that well to finish a kit that quick. Lol. Excellent results man. Love the burnt titanium. Shading was excellent as well.👌
That gatling gun looks sick!! 😱
No primer?! 😮 lol turned out gorgeous, the heat tempering effect on the gun is perfect.
There is primer lmao, I just don't film that step. Check out the part at 11:35, I'm painting on grey primer.
Ooooooo 😂
This kit look like an Armored Core model, have you ever built one ? They got restocked recently, and while they aren't that well design, at the very least they're absolutely beautiful and they have some very odd design that is very lacking when it comes to Gundam, X-Sombrero and TYPE-LAHIRE comes to mind especially, but even the Armored Core V stuff is so unique. Beautiful kit as always, and it's very impressive what you can do with so little time, I can't believe you're not more popular, because the work is top notch
I've seen them, but tbh I just kind of dislike Kotobukiya kits and want to avoid them as much as possible, unless it's an IP I really like. Bandai announced Armored Core kits a while ago, so once those come in stock I might pick a few up.
I really dig your style of painting. It never would have occurred to me to shade the kits that way. It had become pretty much second nature to me to either black base and highlight or to preshade with a darker color and then base coat. Nicely done! Great job on the video as well. Your breakdown and workflow is helpful in showing what you’re doing and how you achieved the results.
Preshading is good too if you want that high contrast, I’m just going for a more subtle look. Preshading tends to kill the vibrancy of colors since you are introducing black into colors, but it’s great if you weather. Different techniques for different goals!
THIS IS FUCKIN LIT!! LOVED THE BURNT TITANIUM. Also wondering if you considered going permet overload? (purple)
Kind of forgot that was even a thing, lmao. Maybe!
Surprise video, nice! I'm glad you got a fun, easy build after the Rising Freedom. The advice about sandpaper/sponge rigidity and re-scribing were actually things that I learned experimentally recently, so it was nice to see my thoughts confirmed here. The kit looks great, as always, definitely more vibrant and visually interesting than the stock colors (and I'm always a sucker for barrel/thruster burn). If there's one thing I could note it's that the BGM is a bit loud, most notably in the painting section IMO. But as always, thanks for the video! and good luck with the rest of the move.
noted, will decrease the volume more next time
@@comradegunplaYeah, I think your audio ducking just needs to be a bit stronger
Oh, let's go! I thought you have your hands full with the potential Immortal Justice and Force Impulse/Gouf. So I didn't expect any WfM builds from you for some time. But at this point I really want to see what you can do with the Calibarn or Gundvolva. (I will be glad with any WfM build tho) P. S. is that some shade of metallic red or is it a copper color for the shell unit? It looked so good without the clear part! I always forget they are a little bit smoky, not perfectly clear.
oh, the clear part is on it. It's just metallic red underneath and the smoky clear part turns it a little darker, I guess
@@comradegunpla yeah, I was referring to the moment around 13:29, when it wasn't covered with clear part yet. Maybe it's just lighting, but it looks hella good. You didn't mention it in the video, but I guess all the permet system elements glow under the UV light? Same as all your previous WfM builds?
@@back_dash this one actually doesn't 😥I wanted the permet marks to look metallic since they are so large, which requires me to use clear red instead of a fluorescent red. I'm getting some fluorescent clear paints shipping in from China, so hopefully I can fix this to have it glow like all my other ones in the future.
@@comradegunpla oh no. hope it can be fixed. Any plans for the brown chicken by any chance? Since you already have Ur, and 3 main boys completed. I can kinda see some sense in completing 2 girls too. Can't believe I'm saying it, but even Thorn's design grew on me over time. Then again, I will be happy with any build from you, king. Do what you like and thanks for the nice vid!
i wish rising freedom had the same height as other hg freedom mostly Strike Freedom. it was too short 😣 i wish there is a simple way to improve this kit height without need to cut/add on or repaint just for the sake of make the cuatom kit color same..
When extending the thighs, do you extend the inner frame as well? Thanks
Not for this build specifically because 3mm is just enough for the inner frame to still work. Any longer than that, you might have to either extend the inner frame, or extend the hip joint peg (which I think is easier)
@@comradegunpla thank you so much
Is that a mini gun barrel
Yep!
No pink at the end?
is there supposed to be?
Looks absolutely sick dude
Idk why, but I just love the look of this kit. I can’t wait to build mine, but I’m a bit scared of the arm and leg joints breaking on me as I’ve heard quite a few stories about the connections breaking after time. Since the kit is kinda cheap I can always buy a new one to replace the broken joints.
Na, this kit is durable
Why does the paint look textured? Could it be that it is not thin enough and it dries as tiny particles instead of one even layer? I like the colors but the texture throws off the look of smooth oxidized titanium.
Could be. I thinned these clears a while ago so they could have dried up a bit. The silver base is also not as chrome-y so that might be the reason too, after all clear paint can only look as smooth as the base. I originally wanted to do all matte for this build, so I didn't think to make the silver super mirror-y, only thought to do this burnt titanium halfway through.
First hg barbie I've seen that looks like the mg. I'm subbing to you man 🔥
your taste in audio is shitty
Awesome content.
after watching ibo as my first gundam anime, i want to be gunpla nerd too 😂
Excellent review, the Gundam Pharact And Elan Ceres, where probably some of the best parts of the series and it actually showed that they had a glimmer of an idea For the series, but Then the series just Straight up crashed And burned. That's a lesson to everyone. Let your show cook A little longer,
was finding how to paint 'PBandai Titanium White', and found this video
Honestly your videos' vibes are super chill and i can binge watching all of them without feeling fatigue!