Пікірлер

• 
  @hexxoneКүн бұрын

  Well 3 YEARS LATER: this issue still happens in the latest iPhone 15s with all kinds of Bluetooth Audio Devices. And I dont have time to reboot my Phone and Re-Pair all of my devices everytime this shit happens. Also I never had this issue with any Android Phone in the last 8 years or so. Apple, fix your shit!

• 
  @iandaniels8386Күн бұрын

  only thing not right is the keyless start its a retro bike so make it a retro bike with a key ?

• 
  @misterLukeG7 күн бұрын

  The shifter is awkward because your actual foot peg is bent upwards. should be parallel to the ground not bent upwards. Compare it to the footpeg on your brake side and you will see the difference

• 
  @DotDotMatrix7 күн бұрын

  I got a comment about that before and what's funny is both my foot pegs are bent up in the exact same way... I didn't investigate it further, but it may have been replaced because of an accident... I've seen some pictures of 1970s Dax and C70s with upwards pointing foot pegs, but I don't know if they were made that way on purpose.

• 
  @nightstalker6668887 күн бұрын

  Which Sony ones are degraded? Old or new ones?

• 
  @DotDotMatrix7 күн бұрын

  If this is about the earpads comment... the new ones have started to lose the shiny stuff that covers the foam... it comes off in black flecks and once it really starts going it's easier to just rip it off, so I'm not taking it with me every time I wear them... the pads can be replaced, but I didn't do it when it happened with my old Sonys. I do wear them a lot... probably 10x more than my other headphones, so it's not like they are cheaply made.

• 
  @nightstalker6668886 күн бұрын

  @@DotDotMatrix No its a comment on sound and distortion you were talking about. I mean which of them has distortion and their drivers got degraded? New or old ones?

• 
  @DotDotMatrix6 күн бұрын

  Old ones distort low frequencies, I think it started happening after 10 to 15 years.... Either from too much input when recording or just age. New ones are still good.

• 
  @feralshad0w8 күн бұрын

  I have had the SOny 7506 for about 7 years now and they are great. A pro tip for larger ears is to get angled earpads.. Fits perfectly around my ears and I can wear them through my workday and gaming after work. I don't like the headband as much, but the clamping force takes the strain off the headband, but not perfect.

• 
  @DiosteestaBuscando10 күн бұрын

  _// Thanks for sharing the video! Let me tell you something important: God loves you! God loves us ! He is no respecter of persons! because God wants us all to be saved! and let's go to the knowledge of the “Truth” God wants to save us from eternal damnation, which we all deserve because of sin, who entered the world through Adam, and death entered through sin, and thus death passed to all human beings, Therefore, we are all “Sinners” But God's Love was so great for us, that he sent his only Son (Jesus Christ), gave him to this world, to die and rise for all of us! No Respect of Persons! so that everyone who believes in Jesus Christ does not go to eternal punishment, but rather has “Eternal Life!” “ Jesus Christ died for our sins, according to the Scriptures; and he was buried, and rose again on the third day, according to the Scriptures Jesus Christ came to call sinners to “Repentance! “ and, he who believes in Him, has “Eternal Life! “But whoever refuses to believe in Jesus Christ, the wrath of God remains on him. Then, as through Adam's transgression, condemnation came to all human beings, in the same way, through the justice of Jesus Christ, justification of life came to all human beings! All of us who believe in The Only Savior of the world! The Only Mediator between God and us! The Lord Jesus Christ! The son of God! All of us who trust in Him; we have “Eternal Life! “ And we must know that there is salvation in no one else; because there is no other name under heaven, given to human beings, in which we can be saved. Only by Believing/Trusting in “Jesus Christ” can we be Saved! But Jesus Christ also said: Not everyone who says to me, Lord, Lord, will enter the kingdom of heaven, but he who does the will of my Father who is in heaven. Therefore, we must be doers of the Word of God! and not only listeners and/or readers, deceiving ourselves. So let's read the Word of God! There is His Will! what God wants us to do! Let us read mainly the Gospels; Matthew, Mark, Luke, and John, and let us pray to God, our Heavenly Father, all the days of the life that He gave us! God loves you! God loves us! To Him alone be the Glory Forever! Amen! Bible Source: Acts 10:34-35 / 1 Timothy 2:3-6 / Romans 5:12 / John 3:16 / 1 Corinthians 15:3-4 / Luke 5:32 / John 3:36 / Romans 5:18 / John 6:47 / Acts 4:12 / Matthew 7:21 / James 1:22 /|]l

• 
  @TSVtube12 күн бұрын

  I love your (bitter) sense of humor man 😄

• 
  @DotDotMatrix14 күн бұрын

  After changing the tire and replacing a broken spoke I realized that my rim was a little bent from an accident this bike was in before I owned it, and that lack of tire "trueness" contributes to undesirable rear wheel noise.

• 
  @NitwitMN15 күн бұрын

  Terrific video! I’ve got a couple ‘21 Trail 125s - lopped off the heel shifter b/c my 6’4” height, 36” inseam & 11.5 size boots make the actual geometry impossible. Deleting heel shifter with angle grinder was for me an enhancement. The semiautomatic 4 speed set up in these allows rider to hit neutral not only at bottom, but also as shifter is HELD in either up or down position in gear transitions. When I realized this, routine chores such as coasting to a stop, or as you mentioned simply coasting became hassle free. Perhaps that behavior goes back to your three speed. Best wishes

• 
  @Templateideas09718 күн бұрын

  Jim Halpert? Is that you?

• 
  @DotDotMatrix18 күн бұрын

  Yes, it is. Pam and I are doing great! Hustling on KZread now that we don’t work at The Office.

• 
  @albertobarbosa596021 күн бұрын

  I have my display open and was literally about to solder in some mini LEDs to have a backlit display. Your video has saved me the install and test time. Thank you!

• 
  @REDBooy4721 күн бұрын

  I have a 500w hub motor with 36v battery but it only gets me 29 kmp which is very less than my previous 350w so Guys does anybody know how to unlock speed form KT LCD 5 at least I want it to be 38kmp to 40kmp

• 
  @DotDotMatrix21 күн бұрын

  I assume this is same bike and controller box, but a new motor. Sometimes motor ratings can be flaky the 350 could have been more powerful than claimed and the 500 could be less powerful than claimed.... but if the motor is turning off when 29 kph is reached what does it say the speed limit is set to when you power on LCD and hold up and down arrows to get to the menu..? I think mine was 46 kph by default, but 18k is what a Class 1 ebike would be... like bikes with a 250 watt motor.

• 
  @REDBooy4721 күн бұрын

  Huh! When I checked it was 72kmp as default and also when I decrease the tyre size from 26 to 6 inch by the program itself I got speed kmp as per tyre inch is shown, like if I set the tyre to 20 inch the kmp will only show top speed to 20 kmp but speed remain the same so I'm very confused at this point now 😔

• 
  @DotDotMatrix20 күн бұрын

  Tire size setting is used to calculate speed based on rotations of the tire and it's diameter, it doesn't affect the actual speed. I think the issue is a limitation with the motor or the controller box (which the box should say what it's rated voltage and rated current is), so if I had a 36v battery with my controller box which can push 13amps it would provide 36*13= 468 Watts on average that the "500 Watt" motor can use... if the box is ratted for less volts or less amps then you're not utilizing as much power as the motor is capable of producing.... If the controller box is sized correctly (like in my example 468 Watts is close enough to 500 and might exceed it when the battery is fully charged)... then it's the motor that is under performing... Cause the speed limiter is set to above the speed you are able to reach.... when you reach the speed limit the motor shuts off... it's very obvious when speed limiting is happening... if that makes any sense 🧐

• 
  @REDBooy4720 күн бұрын

  @@DotDotMatrix 😯! That explains a lot thanks 👍 and one last question how can I use a dual 350w hub motor, can it work on a single 350w,48v controller or Do I have to buy some other 750w controller ?

• 
  @DotDotMatrix19 күн бұрын

  The easiest way to make a 2 wheel drive bike is to get a separate controller box and throttle for the 2nd wheel, basically getting a kit with motor if desired. (I haven't done the full research on how to make it work with 1 controller box...it might be doable) But I like the idea of having Left and Right handlebar throttles so u can choose to use rear drive when taking off and engage front drive to increase top speed... also you would have to wire your front brake into the controller for your front motor so it can work as a kill switch when braking... and same for the rear brake to rear motor.

• 
  @yuriwondmatomyteamwarrior362123 күн бұрын

  Im using both LCD5 & LCD7 so I could control to turn off thtottle for LCD7 but I don't know well for LCD5 how to turn off thtottle and use only PAS mode, I already watched your video but not clear , pls help me!!

• 
  @DotDotMatrix22 күн бұрын

  It's been awhile since I read the manual, but I remember concluding that it was easier to install a physical switch in the throttle wiring. Not saying it's impossible, but I wasn't able to figure it out when asked previously.

• 
  @DotDotMatrix23 күн бұрын

  2 Years Later… the AT2020 is probably my most used voiceover mic (Shure SM57 with foam on it is a close 2nd)…. It needs a P-Pop screen, you have be very careful with speaking technique… it is more “open” than the SM57, so it picks up every undesirable mouth or breathing sound you can make. And getting a silent room noise sample is MANDATORY when recording. Most mouth sounds are between words, so it’s easy to drop in those samples, and the rest of the transient clicks that are part of words can be removed with an Automatic Click Remover plugin. I like it over the SM57 cause it is naturally brighter, which helps with my tendency to go nasal, but so does purposely not talking loudly when recording. I don’t like it over the SM57 cause it requires a lot more work to edit out the undesirable sounds.

• 
  @DotDotMatrix23 күн бұрын

  2 Years Later…I don’t use the NTG5 for indoor audio cause of the way it picks up room reflections and makes (my voice, at least) sound unnatural and emphasizes nasal tones. Also, this mic doesn’t sound good if you’re too close… at the very least keep 2 feet away, but 3-6 feet distance can sound really good… outdoors.

• 
  @Aka.Aka.27 күн бұрын

  The super cub is so beautiful!! 🥰🥰

• 
  @PaulC001Ай бұрын

  20 years, WUT! i feel pretty good when i can geta set of Audio-Technica ATH-M50x to last a year and a half (with ear pad changes and wire changes. after that the plastics ALWAYS break or the things won't seal.

• 
  @DotDotMatrixАй бұрын

  Always have to be careful with the Audio-Techica hinges... really easy to break especially if the the headphones are flipped around and rotated in some weird way.

• 
  @PaulC00129 күн бұрын

  @@DotDotMatrix yes! they don't break all the way. it's just a part that keeps them tight on your head. and of the several pairs i've had i never figured out a way to fix it when it happens (note i didn't say [if] it happens). do i need to watch out for something like this with the sony's? some other part that might break/get loose or something?

• 
  @DotDotMatrix28 күн бұрын

  I've had the Sonys for 3 years and the the ear pads are deteriorating, but that would be the same for any headphone that is constantly in use. They really are ideally built for how they are used.

• 
  @berndtherrenvolk1951Ай бұрын

  But how about an e-motorcycle?

• 
  @DotDotMatrixАй бұрын

  When my dreams come true I will have an e-motorcycle to test.

• 
  @Aka.Aka.27 күн бұрын

  those things have at least 6000watts of power, its gonna have the same top speed as the motorcycle but wayyyy higher acceleration

• 
  @Aka.Aka.27 күн бұрын

  @@DotDotMatrix try contacting them chinese ebike companies for review units

• 
  @spencerderosier6649Ай бұрын

  I got mutton chops too bro

• 
  @MrBrettAIRАй бұрын

  Yooo not bad. Peep Escapade E-Bikes. Escapade Execute to be precise. Thank me later. 🤙🤙

• 
  @DotDotMatrixАй бұрын

  I like the dual motor model… I have plans for converting an old moped to 2 wheel drive.

• 
  @MrBrettAIRАй бұрын

  @@DotDotMatrix Right on bro. Run it!

• 
  @stockeyАй бұрын

  There's Ebikes faster than that 200cc, my 65 pounds, 3000W, 72 V DIY Ebike can give it a run for its money, and my bike is far from the fastest.

• 
  @MrBrettAIRАй бұрын

  No doubt. Escapade Rampage and Escapade Execute are monsters 💪💪

• 
  @kris_ridzzzz_in_gpАй бұрын

  love this channel

• 
  @dexteriumwАй бұрын

  Funny stuff 😂

• 
  @2008gueloАй бұрын

  Nice video 😊

• 
  @karolisg.3096Ай бұрын

  Had a chuckle mate, nice one

• 
  @Geordo1960Ай бұрын

  I have a 72 c70 and have to toe to toe shift too!

• 
  @billystergiopoulos8025Ай бұрын

  Ive got about 30 of these bikes 10 of which are c100 a c65y c50s few 70s and half a dozen 90s

• 
  @damianosplay9457Ай бұрын

  man the first 10s of the vid is exactly what happened to me with my grandfathers mz ts 250/1, he bought it in 1984 but they started making em in 1973 i belive, its been sitting since 1992 not counting my uncles worsening the condition of the bike with their tinkering, had to redo most of the electrics, i need to get that bike running for him

• 
  @kevinrein78532 ай бұрын

  I bought the same exhaust almost 13 years ago now over 3000miles on it now stil going btw you are missing the baffle one from thailand will fit in with a little tapping and screw in that hole on the end it will sound and perform better. Good luck nice bike.

• 
  @weebercorey2 ай бұрын

  Watched this for pure entertainment value. I was not disappointed.

• 
  @DotDotMatrix2 ай бұрын

  This video is a sloppy mess. Short assessment is that Thumb Throttle is good if you’re mostly using pedal assist. Twist Throttle is good for non-pedal assist pedaling and no pedal riding. Also, Thumb Throttle takes up less handle bar space.

• 
  @ravansam-un6id2 ай бұрын

  Can use 40x directly with my laptop i dont have an amp is that going to limite thre performance if so i will go with other gaming option lik hyperx clode 3

• 
  @DotDotMatrix2 ай бұрын

  Any decent laptop will be able to power these headphones... There might be comparisons to an amp where the amp sounds better, but I've never plugged them into something and felt like volume power or dynamic range was missing.

• 
  @ElectricDanielBoone2 ай бұрын

  Good job on your video! Kinda hard on the “Boomers”, like me, though. Mine just arrived and I’m going to test it tomorrow. Been using a Greenworks 40v for years, which has done great for me, but this Husky should be a step up. I’m with you on the gas stinkin’ up everything. Loved the Heman toons! My son and I would watch that and G.I. Joe together back in the 80’s.

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/h6N416-BYanJeag.html

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/h6N416-BYanJeag.html

• 
  @aaronrhoades5092 ай бұрын

  It's that I don't have one😢

• 
  @nomeproductionsLLC2 ай бұрын

  Great job. Not too many people would do this, but I wish more would.

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/dYOm0K18nZjPmc4.html

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/maOsu5qEiZenYbg.html

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/maOsu5qEiZenYbg.html

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/ZaGsssWHeZCpfNY.html

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/hqmnmK-wf8Swlps.html

• 
  @ensidfkgnur2 ай бұрын

  Wife has new one with fob, do not like.

• 
  @ensidfkgnur2 ай бұрын

  nice, thanks for the vid! Just got a c70 and shouldn't be much different.

• 
  @DotDotMatrix2 ай бұрын

  I could have added a part about spraying super starting fluid into the carb from the air filter… It’s easier to do on mowers that have clip-on air filter covers.

• 
  @jessbailey67182 ай бұрын

  Thanks for this I too have c100 and these do help!!!

• 
  @weebercorey2 ай бұрын

  I love my C125, I rode it to work just now -132mpg! However, here's what I don't like: Gas tank too small, just barely one gallon, no storage space at all, no kick start, no pillion seat (I added one), no kick stand (I added one) The key fob is a double edged sword - it's actually great, but I know one day I'll get stranded because of it.

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/X6d7xNaDibWWd6w.html

• 
  @anthonysylvester7402 ай бұрын

  Came for some light research, left with moderate existential dread. Thanks.

• 
  @9ColorTV2 ай бұрын

  The song used in this video is part of the Best of Dot Dot Matrix Music collection... kzread.info/dash/bejne/fJOtpdSbqdbOqLA.html