Welcome to Bibles and Bullies where I do my best to lay out a Tapestry of Truth for you. I've been an artist all of my life and I make bad dad jokes. Sometimes it's good, sometimes it's bad, and I'm almost always ugly so enjoy 🤣
On this channel You will find a wide variety of videos that I have made over the years. These are videos of my artwork, concrete design work, showing and raising American bully dogs, and currently Automotive detail and instructive videos on how to do different things related to the car industry.
Additionally with currently our 9 dogs and counting we do different dog videos from feeding, training, showing, and more. Make sure you Like your favorite video or LIKE them all and hit Subscribe to the channel so you don't miss upcoming videos.
Пікірлер
Great video
@@TRBLMAKR777 thanks for watching!
I've had my 28inch snapper for about25yrs haveonly had the blade belt brrak that's it not bad for 25yrs still running strong .😊😊
@@bradfordhughes4533 that's awesome! Thanks for watching!
best solution for faded head lights new head lights
Sure is if you want to spend a bunch of money on something I don't need. Mine look great now and still the originals, 10 years old. Thanks for watching!
Glad I watched this video because last year i got a set of Pirelli Scorpion AT Plus tires that look a lot like your tires, and just like your tires, the more you clean the tire the worse they look. At first I thought something was wrong with them. I know about tire browning but, I had never seen tires that look that bad after you clean them. You have to put tire dressing on them or else they look worse than anything you've seen no matter how clean the rest of the vehicle is. They must have changed something in the way they are made.
From my detailing experience I can tell you not all tires Clean as well as others.
Thank you for your video on the tire / rim cleaning. I'm looking forward to seeing which tire dressings doses the best / last the longest out of the 4 dressings on your next video review. Keep up the video. Thank you again 👍👍
@johnfreitas1124 no problem. I'm looking for some other ones as well that advertise year coverage. Thank you for watching!
Thank you for this beautiful video ❤ i am so excited for my Pepper is due pretty soon and this video really help me a lot ❤❤
I hope everything goes well! Don't forget to have your vets emergency number if needed.
If you want to learn Hebrew i recommend artscroll im a Christian but there a Jewish company with real Hebrew
I think it was a little splotchy because you didn't get the rubber fully clean before applying. The Adams tire and rubber cleaner works amazing . It gets the rubber completely clean. Nice video ..I prefer the Adams graphene tire dressing it looks so good too me
Thanks for watching!
Nice video! I'd be interested to see how it holds up, but they definitely both look good.
I agree. I'll do an update in a week or two. I've found another one that is supposed to last a year but real world it's more like 4-6 months. Just expensive though!
Hi I want a puppy American bully
Sorry I do not have puppies at this time.
That sure is a beautiful little girl to be exposing her to pit bulls. Not gonna argue the point, there's just too much evidence if you dare look. I implore you to do something, for her sake, and your peace of mind.
@John-gj1jr I don't have any pitbulls. These are American Bullies, significantly different temperaments. Thanks for watching!
@@biblesbulliesbogies1143 Thank you for pointing that out. I will research this further. Btw, I have 3 RER Snappers and enjoyed seeing your work.
So far it's been a good little mower. We have a lot of bumps and hills but it gets the job done.
Was this the Farm truck? LOL
Yes It was used as a farm vehicle lol
I thought u didn't wash pups until there 8 weeks old
Recommended is 8 weeks. These pups were fat and healthy and we ensure they don't get too hot or cold while bathing. This was why we moved them to their kennels once clean so that baths weren't often after this. We wanted to get rid of the contaminants from them rolling around in their own feces. Use caution if you're working with pups this young.
Bro this video and your teaching made me a beast brother 💯💯💯💯💯💪🆘️
I'm glad that it helped you out! Ju is good at what he does!
never forget to open up the vent on the gas tank.
Thanks for watching!
Zephaniah 3:9 For then I shall give to peoples the change to a pure language, in order for them all to call upon the name of YAHUAH , in order to serve him shoulder to shoulder.’ greetings to you from the brothers in Italy ❤ liberation is near !!! 💪 
Thank you for watching! I've always wanted to come there 😁
How do you plan to make all the details pop? I’m starting out trying to make my engravings pop without burning them. I thought about wood finish or just boiled linseed oil. What do you think?
Either one will add a nice touch. Experiment with things is the best thing I've found in my 38 years of art experience. It's only finished when you say it is 😁
For >> IN << him Christ Jesus ) dwelleth >> ALL << the fulness of the Godhead bodily. Colossians 2:9 Jesus aka God in a body !
I'm GLAD that His name has been translated to our English JESUS !!!! So we DON'T have to know a ancient language to use a different name, HE knows HIS name in EVERY language !
Zephaniah 3:9 For then I shall give to peoples the change to a pure language, in order for them all to call upon the name of YAHUAH , in order to serve him shoulder to shoulder.’ we had to know his name in the ancient language (in pure language) yes....Jesus is not the Father.....inoktre Jesus is the god of Rome, not of biblical ISRAEL, Jesus does not exist, YAHUSHA YES AND HE IS HIS SON, he never robbed the FATHER....Jesus does robberies YAHUSHA NO....YAHUSHA IS TO THE RIGHT OF THE FATHER.....repent! HI
That includes the CORRUPT TEXTS, the 66 was latter to be found to be THE scriptures.
MAY be my ears but it sounds like yours is idling to high!
FYI: If the differential case was dry, COMPLETELY EMPTY like for a rebuild, the factory states it should take 24 OZ. and for the Chain Case it requires 2 OZ Max
42:38 The WHY you ask about in filling instructions of the differential is because when you SEE the "00" grease coming OUT of the bottom hole then when the mower is set level then the complete differential internal parts are sufficiently covered with the grease, some UNLEARNED or refuse to follow directions fill the case till the lube comes out of the top hole and in doing so that OVERFILLS the case
35:30 You DON'T use "gear oil" the rear end & chain case was NOT designed for "liquid" type lube, the tolerances are too wide even with NEW parts to keep "gear oil" inside, it WILL LEAK OUT and your internal parts will be destroyed.
Ok thank you!
I worked 43 years AT the Snapper plant, one suggestion, if you make you fuel line a little longer you then can pull the tank OUT of the bracket & set beside the tire upright when you set the mower on the bumpers, this way it doesn't matter how full the tank is and less chance of the fuel flooding the engine
Good tip, thank you!
Love the videos love the family & the dogs. But the music was a bit much ! Congratulations 👏👏👏
Glad you enjoyed it, sorry about the music.
Looks good! Where did you get new front tires from. Mine is going to need some soon.
I just ordered online. Don't remember where from but quite a few places have them.
Thanks
Pocket bully giving birth
Watching this video now, my Bully is expecting to drop puppies within a week or 2. Definitely starts to get a little stressful with this being her & I first litter. Do you have to give puppies formula or milk through a bottle? I’m trying to learn here but is there a specific formula your supposed to feed the puppies? Please help I need good advice
It's best if the mother takes care of the puppies herself but if you must assist goats milk is best, otherwise formula. If the pups are very tiny or weak then they might need to be tube fed which is tricky to do.
Considering your dog that had a C-section it took her a few days to actually warm up to the puppies which is what I’m thinking is going to be the same scenario with my bully (she has to get a C-section too) so I’m just trying to figure out feeding wise what’s best to do. I’m also unsure about whether I need a heat lamp or a heated bed or even both.? I’ve never had a little before so I feel it’s a lot of pressure if I don’t do things correctly
I've had some take a couple days and others take them immediately. Keep her calm and keep in mind as she's waking up she has no idea what happened. Natural birth is the best way in all species for this reason. Introduce the pups slowly and be there with her, if you notice any signs of aggression remove them immediately but keep trying as a mother is by far the best thing for her babies.
what is the belt size? Great video!
I believe the belt is 72.25" but it would be best to look up your stock number to ensure you're getting the correct size for your mower. Thanks for watching!
I like these snappers big time. The older the better. I had an early 2000's Snapper, still kicking myself I sold it. Ill get another one in the future
I haven't had one before this one. Overall pretty nice and easy to work on.
Where is the fuse please
They say it’s in the holder where is that
@jaynewbold8155 what fuse are you referring to?
@@jaynewbold8155 LOOK at the Operators Manual or Parts Manual for YOUR Model / Series they are different
Danke für ihr Video 🦾😁🖖
No problem, thank you for watching!
🙌so encouraged my bully will be a year bext mo th n when she goes in her 3rd heat which is the next one i ho have her in seminated She us a Zri
It's best if females are 18 months or older before breeding. It's part of the code of ethics for ABKC.
Where did you see that gear lube reference?
I learned a lot from Jim Jackson's channel so that might be where from.
@@biblesbulliesbogies1143 There is a good bit of misinformation on his channel, he treats all Snappers the same and they are NOT, that's why BEWARE of a channel that works on them that doesn't tell you the Model / Series that they are working on.
@@biblesbulliesbogies1143 Use ONLY "00" grease, that's what the mower was designed to us, the tolerances are too large with the mating parts of the differential case & primary chain case to use "Liquid Lube" , we ONLY used "00" at the factory in testing & the results were superb, the "liquids" RUN OFF the internal parts.
Thank you, I used 00 grease.
I've got a 33inch and it's in great shape and I had only gave a hundred and fifty dollars for it and it is like new great machines even if my top machines is the vintage cub cadets the 100 series we have got three and three 124s and three 122s all 60s era made in Chicago by international harvest or company back in the 80s
Great to hear and thanks for watching!
🥰
Glory to YAHUAH forever in Yahusha !!!
Shalom do you guys have any pocket or micro bully puppies available? Where are you located and we would really like to see the pups you have available. We live in northern NY.
I'm sorry, no we don't.
The part that the tire is screwed into, seems to be missing a plug at the end. All the grease was in the cap. Do i need to replace the triangular part replaced
The cap should be covering a grease point, I don't believe there is another plug or cap.
@@biblesbulliesbogies1143 thank
Now why the hell didn't I think of that? 🤦
Lol thanks for watching!
Nice machine, I have 2 Snappers a 28 inch Hi Vac, and a regular deck 30 inch. I eventually replaced both engines with B@S 13.5 hp Intek motors.
It's almost time to start using them again here. Another few weeks probably.
I like the rear Tires, what kind of shape are the motors in?@@biblesbulliesbogies1143
@BG-pd6os overall pretty good. I did some work to it for maintenance but nothing major was needed. I'll check it over again before this season starts.
My 28 INCH had a 9hp Briggs like yours, i replaced it with a 13.5 HP Intek, if you need a new motor, I know where 5 are!@@biblesbulliesbogies1143
BEAUTIFUL!!
Thank you for watching!
No ee europeanism is apart of YAHUAH, nice try though,....YOD HEY YOD WAH.... Shalum
I’m interested in fly
Email [email protected] please
I agree 💯
How good is the kibble
It's been doing good. Been using it for over a year now.
My pit boxer mix loved the snow. I would make her a snowman ( from 3 moths old) so she could attack it. One time I had my cell phone in my pocket it was new so I had no idea it was going to call 911. I’m telling my bully get him get him over and over as she attacked the snowman. The snow came after dark so that’s when we were out in the yard. It’s late, in between me talking to my Dog I hear a faint voice saying, “hello do you hear me; where is the man? Is he attacking you? Do you want me to send the police? I was embarrassed but told her I didn’t call 911. She said it was some kind of feature in my phone. I had to apologize that I sounded like my dog was attacking an intruder. She was so kind. She said, well from what I heard if it was a real man instead of a snowman your dog would have no problem attacking the intruder, protecting you. She did at the end tell me I need to make sure I’m not playing w/my dog w/my cell phone in my pocket. Lesson learned 😮
Lol that's quite an experience and I'm glad everything turned out ok. Thank you for sharing the story and for watching! I needed a laugh this morning 😁
Can you do this over an existing tile floor? I want wood floors. What would cost be on a 1800 sq fr house?
It's definitely better to do on concrete than over an existing floor as this is only as good as its base. I'm no longer in business as I retired from concrete design shortly after this video.
Very cool Jeremy. Always so talented!
Thank you! I like to learn new things that are challenging.