I like these snappers big time. The older the better. I had an early 2000's Snapper, still kicking myself I sold it. Ill get another one in the future

@biblesbulliesbogies1143

2 ай бұрын

I haven't had one before this one. Overall pretty nice and easy to work on.

I worked 43 years AT the Snapper plant, one suggestion, if you make you fuel line a little longer you then can pull the tank OUT of the bracket & set beside the tire upright when you set the mower on the bumpers, this way it doesn't matter how full the tank is and less chance of the fuel flooding the engine

@biblesbulliesbogies1143

2 ай бұрын

Good tip, thank you!

Always had Snappers in our fleet. Great machines.

@biblesbulliesbogies1143

11 ай бұрын

I'm impressed it mows our hills and it's fairly easy to work on. Thanks for watching!

never forget to open up the vent on the gas tank.

@biblesbulliesbogies1143

Ай бұрын

Thanks for watching!

i have a 1986 33inch 11hp still mows well

@biblesbulliesbogies1143

11 ай бұрын

That's awesome! They don't make things like they used to. Thanks for watching!

Nice machine, I have 2 Snappers a 28 inch Hi Vac, and a regular deck 30 inch. I eventually replaced both engines with B@S 13.5 hp Intek motors.

@biblesbulliesbogies1143

4 ай бұрын

It's almost time to start using them again here. Another few weeks probably.

@BG-pd6os

4 ай бұрын

I like the rear Tires, what kind of shape are the motors in?@@biblesbulliesbogies1143

@biblesbulliesbogies1143

4 ай бұрын

@BG-pd6os overall pretty good. I did some work to it for maintenance but nothing major was needed. I'll check it over again before this season starts.

@BG-pd6os

4 ай бұрын

My 28 INCH had a 9hp Briggs like yours, i replaced it with a 13.5 HP Intek, if you need a new motor, I know where 5 are!@@biblesbulliesbogies1143

42:38 The WHY you ask about in filling instructions of the differential is because when you SEE the "00" grease coming OUT of the bottom hole then when the mower is set level then the complete differential internal parts are sufficiently covered with the grease, some UNLEARNED or refuse to follow directions fill the case till the lube comes out of the top hole and in doing so that OVERFILLS the case

Looks good! Where did you get new front tires from. Mine is going to need some soon.

@biblesbulliesbogies1143

2 ай бұрын

I just ordered online. Don't remember where from but quite a few places have them.

The part that the tire is screwed into, seems to be missing a plug at the end. All the grease was in the cap. Do i need to replace the triangular part replaced

@biblesbulliesbogies1143

3 ай бұрын

The cap should be covering a grease point, I don't believe there is another plug or cap.

@janmcrae8895

3 ай бұрын

@@biblesbulliesbogies1143 thank

what is the belt size? Great video!

@biblesbulliesbogies1143

2 ай бұрын

I believe the belt is 72.25" but it would be best to look up your stock number to ensure you're getting the correct size for your mower. Thanks for watching!

FYI: If the differential case was dry, COMPLETELY EMPTY like for a rebuild, the factory states it should take 24 OZ. and for the Chain Case it requires 2 OZ Max

I've got a 33inch and it's in great shape and I had only gave a hundred and fifty dollars for it and it is like new great machines even if my top machines is the vintage cub cadets the 100 series we have got three and three 124s and three 122s all 60s era made in Chicago by international harvest or company back in the 80s

@biblesbulliesbogies1143

3 ай бұрын

Great to hear and thanks for watching!

Where did you see that gear lube reference?

@biblesbulliesbogies1143

3 ай бұрын

I learned a lot from Jim Jackson's channel so that might be where from.

@REVNUMANEWBERN

2 ай бұрын

@@biblesbulliesbogies1143 There is a good bit of misinformation on his channel, he treats all Snappers the same and they are NOT, that's why BEWARE of a channel that works on them that doesn't tell you the Model / Series that they are working on.

@REVNUMANEWBERN

2 ай бұрын

@@biblesbulliesbogies1143 Use ONLY "00" grease, that's what the mower was designed to us, the tolerances are too large with the mating parts of the differential case & primary chain case to use "Liquid Lube" , we ONLY used "00" at the factory in testing & the results were superb, the "liquids" RUN OFF the internal parts.

@biblesbulliesbogies1143

2 ай бұрын

Thank you, I used 00 grease.

Where is the fuse please

@jaynewbold8155

3 ай бұрын

They say it’s in the holder where is that

@biblesbulliesbogies1143

3 ай бұрын

@jaynewbold8155 what fuse are you referring to?

@REVNUMANEWBERN

2 ай бұрын

@@jaynewbold8155 LOOK at the Operators Manual or Parts Manual for YOUR Model / Series they are different

35:30 You DON'T use "gear oil" the rear end & chain case was NOT designed for "liquid" type lube, the tolerances are too wide even with NEW parts to keep "gear oil" inside, it WILL LEAK OUT and your internal parts will be destroyed.

@biblesbulliesbogies1143

2 ай бұрын

Ok thank you!

MAY be my ears but it sounds like yours is idling to high!

That sure is a beautiful little girl to be exposing her to pit bulls. Not gonna argue the point, there's just too much evidence if you dare look. I implore you to do something, for her sake, and your peace of mind.

@biblesbulliesbogies1143

11 күн бұрын

@John-gj1jr I don't have any pitbulls. These are American Bullies, significantly different temperaments. Thanks for watching!

@John-gj1jr

10 күн бұрын

@@biblesbulliesbogies1143 Thank you for pointing that out. I will research this further. Btw, I have 3 RER Snappers and enjoyed seeing your work.

@biblesbulliesbogies1143

10 күн бұрын

So far it's been a good little mower. We have a lot of bumps and hills but it gets the job done.