I'm Aaron. It's Always Sunny in my Arizona shop. Check back for projects on the Monarch metal lathe, Sharp Milling machine, restoring bench grinders, drill presses, bench vises, and more.
If your gauge blocks are accurate enough and in good condition they should wring together.
@billmanglaris379912 күн бұрын
Why in the world did you buy a solid piece ! You could have gone to McMaster carr and bought one closer to the I'd and probably. 6 inches long , nice work but a waste of time and money
@veejaybomjay8145Ай бұрын
Dude, are you a Wobbly?
@user-xd8cx4bd9zАй бұрын
the ways is many and different, i use a center drillbit in the chuck and set my tool to match the point of the drillbit - fast,easy and works perfect for me
@mustafagundogmus7044Ай бұрын
Bızde de var tezgehtan
@josemigueltorresguerra8365Ай бұрын
Entera chanta la página no recordable
@stuarth432 ай бұрын
how many hp is the lathe
@stevensmith62312 ай бұрын
The 3 videos on the Lisle 91000 grinder were very helpful as I am missing some of the same parts on one I bought recently. One suggestion: instead of calling a part "this guy" use the name found in the instruction manual--it would help avoid any confusion.
@kir0v2 ай бұрын
sick shirt.
@Hoaxer513 ай бұрын
Are you still kicking? Could use another video from you if you aren’t too busy!
@rruusskk3 ай бұрын
Is that the original color for that monarch? I have one that was built late 12kk from 1940 that was repainted gray, but under the gray is that color green that you have.
@Jake69953 ай бұрын
What type of fabric did you use?
@potlimit20024 ай бұрын
Turn the feed rod by hand to get the gears to mesh!
@roccomicelotta37985 ай бұрын
Nice job! 👍
@chrisboek23465 ай бұрын
U ok u dropped off the face of the earth
@sethtromburg15895 ай бұрын
Great video. I love the attention to detail.
@jimbennett72486 ай бұрын
My method for using the foam is to first use the razor knife to cut the outside profile, then I use my dremel tool with a base plate and a straight bit to create the recess. With this setup it's easy to cut recesses of varying depths for tools with complex shapes. The bottom of the recesses will be smooth and consistent.
@roccomicelotta37986 ай бұрын
Love the size of your machine and I think the color is perfect. Someone spent a good amount of time buffing the chrome handles, just beautiful. I am looking around now for a similar machine. Thank You, Ric
@johntenhave17 ай бұрын
A comment if I may? That skyhook base attachment into those thin cast iron flanges on your top slide, combined with the the significant lever arms and the mass of the chuck is a recipe for disaster. Do not be surprised if one day the whole assembly tears out - with the associated tears.
@norandavis8567 ай бұрын
Right tool for the job kinda situation. There’s nowhere near enough torque to take a .25 depth of cut on a lathe that size. We have a Puma 400 CNC lathe with an 18” chuck and I wouldn’t try taking .250 on that either. On a big machine with a lot of horsepower and a lot of torque, you can take .250-.300 all day long. But on a smaller machine all you’re going to do is tear things up and get them out of alignment. Best course of action if trying to save time and get a job done faster is to ramp up the surface footage and feed and lighten up the depth of cut.
@Meeky8157 ай бұрын
What angle this the gravity feed rails?
@Changtent7 ай бұрын
Side note. I noticed the lock ring on your tool holder adjustment uses a setscrew instead of the common double nut setup. Great idea as I find the double nut often changes the setting when I lock it. Thanks, I'll try it.
@Dynetric7 ай бұрын
Thanks for making the video. I'm working on a Roll-In Saw table at the moment - same issue. Can you explain how you attached the steel bars to the table and to each other? Thanks..
@prun88938 ай бұрын
It takes a lathe to make bushings for a lathe. How was the first lathe made?
@Etol19638 ай бұрын
A oldtimer ones told me. Steel is like a hungry baby. If it starts screaming and the chips don't break, slow the speed and up the feed.
@hersch_tool8 ай бұрын
That is a really cool machine. There is actually on for sale me. I would love to buy it but I don't know if I could even move a 9000lb machine lol.
@russ45708 ай бұрын
watching you wreck that chuck was fascinating. NOT
@louistrapizona72548 ай бұрын
would you make a part for my 91000??
@jaybolyard8 ай бұрын
Any leads on that white wheel - where to buy? I cannot seem to find a white wheel with right arbor and width.
@colinmarshall63488 ай бұрын
where did you buy your QcTp
@MikeG-js1jt8 ай бұрын
why would you want to cut that deep on a single cut though?
@jeffnelson33229 ай бұрын
Nice lathe. But I would have to repaint it. LOL i am old school grey.
@JohnSmith-ed1sr9 ай бұрын
Why did you disappear …. I was waiting for the next video
@nickmasterson9429 ай бұрын
Hi Aaron. I’m the proud new owner of a series 61 20x78 monarch. Looks like my situation will be similar to yours as far as the rigging goes. I’d like to get some more information about the skates you used to bolt to the machine. My plan is to get it on skates and drag it onto a tilt deck trailer. The trailer has a 12k winch on it. Do you think this is doable? I guess second option will be to hire a flat bed wrecker like you did, but I’m thinking if it’s on skates I don’t see any reason the tilt deck wouldn’t work. Thoughts? Thanks
@AlwaysSunnyintheShop9 ай бұрын
Hi Nick. I made a video on making the skates I ended up using to move my Monarch that you can check out. If the drop deck trailer is long enough then I would think you'd be fine using it. It was pretty nerve-wracking to winch this much weight up the wrecker, so I'd definitely go with a trailer if it were an option.
@mikemullis68629 ай бұрын
Overkill.....
@razorworks99429 ай бұрын
Hey Aaron, Just saw your vid here and thanks for posting as I am looking to buy a six jaw for my newly acquired 13" Southbend. I'm looking at the Pratt-Bernerd and the Bison, but maybe I can only afford the Shars..😳 I'll post a vid when I get one.. Take care, Razor!
@mtnviper19639 ай бұрын
Nice old heavy lathe but, without a foot brake, I wouldn’t have it in my shop.
@_BigLife_9 ай бұрын
Very nicely done. Every Wilton I have worked on has quality control issues. Apparently it doesn't make them any less collectible, and they can definitely be used.
@osamabinchicken88539 ай бұрын
Loose hanging necklace in the workshop, that's a written warning for le apprentice
@rupunzel629910 ай бұрын
What happened to the tool post mounting stud could have produced a sudden failure of the tool post during large DOC cuts. If the tool post mounting were to snap off, the tool post and lots more would become a lethal projectile. If any threaded fastener feels "soft or stretched" when torqued, remove it if possible and give it the Naval float test.. or put that ALL those threaded parts into the circular file never to find their way on to any mech device ever again. Metals are far from solid, they are more like rubber and deforms a lot more than folk realize or accept. What happened to the tool post mounting stud, the yield point of the material was exceeded. Once this has happened, it is ripe for failure.. Take the time to watch this video on metals and material science of what yield point means and why materials behave in the ways they do. kzread.info/dash/bejne/iYeG06ydhJWpf6g.html Never skimp or take for granted threaded parts or any parts made of metal or similar materials, knowledge and understanding of materials is an essential aspect of machine tool work.
@haroldblack271910 ай бұрын
Thay are oil nipls not greas
@Jacob-6410 ай бұрын
Stunning lathe .... I wonder what the ticking noise is when the lathe is running
@fauziahmukti18110 ай бұрын
Bagus
@wilde.coyote661810 ай бұрын
Beautiful machine, shame to dirty it.
@cyrusramsey474111 ай бұрын
They remind me of an Art Deco era locomotive.
@Larry-yo3wq11 ай бұрын
You need to mount your tool holders closer to the lathe
@alxrckrt Жыл бұрын
Did you pick up a new CNC machine?! New to you?
@clintchapman4319 Жыл бұрын
Nice chuck Bud!
@erichockuly9819 Жыл бұрын
I hope your renovations are coming along as you expected!!! How about an update video? I, along with others are anxious to here from you! Hope all is well
@Impuritan1 Жыл бұрын
Hey, this guy ok? Anyone know? Hasn’t made any videos in a long time it seems.
Пікірлер
If your gauge blocks are accurate enough and in good condition they should wring together.
Why in the world did you buy a solid piece ! You could have gone to McMaster carr and bought one closer to the I'd and probably. 6 inches long , nice work but a waste of time and money
Dude, are you a Wobbly?
the ways is many and different, i use a center drillbit in the chuck and set my tool to match the point of the drillbit - fast,easy and works perfect for me
Bızde de var tezgehtan
Entera chanta la página no recordable
how many hp is the lathe
The 3 videos on the Lisle 91000 grinder were very helpful as I am missing some of the same parts on one I bought recently. One suggestion: instead of calling a part "this guy" use the name found in the instruction manual--it would help avoid any confusion.
sick shirt.
Are you still kicking? Could use another video from you if you aren’t too busy!
Is that the original color for that monarch? I have one that was built late 12kk from 1940 that was repainted gray, but under the gray is that color green that you have.
What type of fabric did you use?
Turn the feed rod by hand to get the gears to mesh!
Nice job! 👍
U ok u dropped off the face of the earth
Great video. I love the attention to detail.
My method for using the foam is to first use the razor knife to cut the outside profile, then I use my dremel tool with a base plate and a straight bit to create the recess. With this setup it's easy to cut recesses of varying depths for tools with complex shapes. The bottom of the recesses will be smooth and consistent.
Love the size of your machine and I think the color is perfect. Someone spent a good amount of time buffing the chrome handles, just beautiful. I am looking around now for a similar machine. Thank You, Ric
A comment if I may? That skyhook base attachment into those thin cast iron flanges on your top slide, combined with the the significant lever arms and the mass of the chuck is a recipe for disaster. Do not be surprised if one day the whole assembly tears out - with the associated tears.
Right tool for the job kinda situation. There’s nowhere near enough torque to take a .25 depth of cut on a lathe that size. We have a Puma 400 CNC lathe with an 18” chuck and I wouldn’t try taking .250 on that either. On a big machine with a lot of horsepower and a lot of torque, you can take .250-.300 all day long. But on a smaller machine all you’re going to do is tear things up and get them out of alignment. Best course of action if trying to save time and get a job done faster is to ramp up the surface footage and feed and lighten up the depth of cut.
What angle this the gravity feed rails?
Side note. I noticed the lock ring on your tool holder adjustment uses a setscrew instead of the common double nut setup. Great idea as I find the double nut often changes the setting when I lock it. Thanks, I'll try it.
Thanks for making the video. I'm working on a Roll-In Saw table at the moment - same issue. Can you explain how you attached the steel bars to the table and to each other? Thanks..
It takes a lathe to make bushings for a lathe. How was the first lathe made?
A oldtimer ones told me. Steel is like a hungry baby. If it starts screaming and the chips don't break, slow the speed and up the feed.
That is a really cool machine. There is actually on for sale me. I would love to buy it but I don't know if I could even move a 9000lb machine lol.
watching you wreck that chuck was fascinating. NOT
would you make a part for my 91000??
Any leads on that white wheel - where to buy? I cannot seem to find a white wheel with right arbor and width.
where did you buy your QcTp
why would you want to cut that deep on a single cut though?
Nice lathe. But I would have to repaint it. LOL i am old school grey.
Why did you disappear …. I was waiting for the next video
Hi Aaron. I’m the proud new owner of a series 61 20x78 monarch. Looks like my situation will be similar to yours as far as the rigging goes. I’d like to get some more information about the skates you used to bolt to the machine. My plan is to get it on skates and drag it onto a tilt deck trailer. The trailer has a 12k winch on it. Do you think this is doable? I guess second option will be to hire a flat bed wrecker like you did, but I’m thinking if it’s on skates I don’t see any reason the tilt deck wouldn’t work. Thoughts? Thanks
Hi Nick. I made a video on making the skates I ended up using to move my Monarch that you can check out. If the drop deck trailer is long enough then I would think you'd be fine using it. It was pretty nerve-wracking to winch this much weight up the wrecker, so I'd definitely go with a trailer if it were an option.
Overkill.....
Hey Aaron, Just saw your vid here and thanks for posting as I am looking to buy a six jaw for my newly acquired 13" Southbend. I'm looking at the Pratt-Bernerd and the Bison, but maybe I can only afford the Shars..😳 I'll post a vid when I get one.. Take care, Razor!
Nice old heavy lathe but, without a foot brake, I wouldn’t have it in my shop.
Very nicely done. Every Wilton I have worked on has quality control issues. Apparently it doesn't make them any less collectible, and they can definitely be used.
Loose hanging necklace in the workshop, that's a written warning for le apprentice
What happened to the tool post mounting stud could have produced a sudden failure of the tool post during large DOC cuts. If the tool post mounting were to snap off, the tool post and lots more would become a lethal projectile. If any threaded fastener feels "soft or stretched" when torqued, remove it if possible and give it the Naval float test.. or put that ALL those threaded parts into the circular file never to find their way on to any mech device ever again. Metals are far from solid, they are more like rubber and deforms a lot more than folk realize or accept. What happened to the tool post mounting stud, the yield point of the material was exceeded. Once this has happened, it is ripe for failure.. Take the time to watch this video on metals and material science of what yield point means and why materials behave in the ways they do. kzread.info/dash/bejne/iYeG06ydhJWpf6g.html Never skimp or take for granted threaded parts or any parts made of metal or similar materials, knowledge and understanding of materials is an essential aspect of machine tool work.
Thay are oil nipls not greas
Stunning lathe .... I wonder what the ticking noise is when the lathe is running
Bagus
Beautiful machine, shame to dirty it.
They remind me of an Art Deco era locomotive.
You need to mount your tool holders closer to the lathe
Did you pick up a new CNC machine?! New to you?
Nice chuck Bud!
I hope your renovations are coming along as you expected!!! How about an update video? I, along with others are anxious to here from you! Hope all is well
Hey, this guy ok? Anyone know? Hasn’t made any videos in a long time it seems.