Thank you for the video. Had my door handle fixed in 10 mins.
@kaimanson3174Күн бұрын
@@christy0787 awesome 👍 Happy to help and even better a fully functioning door handle.
@slapskate8 күн бұрын
This is easy to forget lol 🤣 Scrolling through the infotainment system like where the hell is it!
@kaimanson31748 күн бұрын
@@slapskate yep, I'm with you. Sometimes I have to watch my own videos 😂
@sandrasantiago752710 күн бұрын
Qué exageración tan facil y sencillo de montar
@kaimanson317410 күн бұрын
@@sandrasantiago7527 asi es Sandra, se ve complicado pero en realidad es super facil. 👍
@CommonInsider14 күн бұрын
Bro thank you for this and the cv axle video, conveniently enough I've had both of these fail on me at the exact same time and your videos on the replacement procedure have been fantastic.
@kaimanson317414 күн бұрын
@@CommonInsider ur welcome brother, happy to help 👍
@ebekman15 күн бұрын
Thanks, for the share. Its very obvious, more simple only if I hold the lamp and you rotate de planet
@kaimanson317415 күн бұрын
@@ebekman Happy help 👍 trust me the first time I did it, I didn't have any clue how to get it off. Once I finally figured it out....I had to make a video about it to save others from going insane 😜
@MauroHernandez-oc1mk18 күн бұрын
Do you the size of the Allen wrench? Thanks for the info.
@kaimanson317413 күн бұрын
Hey Mauro, I don't recall the size. Maybe one of the viewers can shine in on that.
@arc657122 күн бұрын
Great video! Why did you remove the upper front end link? I don’t see anything attached to the knuckle (on the strut) as the bottom link end connects to the sway bar. Curious and maybe others can skip this step like I’m going to try to lol
@kaimanson317422 күн бұрын
Thanks, great question. It was because I was replacing the wheel bearing as well. So I ended up taking the whole thing out. Happy to help 👍
@chanhomoon126624 күн бұрын
could you tell me where you got the fog light kit please??
@kaimanson317424 күн бұрын
The adapters you can get it here. a.aliexpress.com/_mtNvZSY
@chanhomoon126624 күн бұрын
@@kaimanson3174 what about the fog light? so sorry for bothering you.
@kaimanson317424 күн бұрын
The fog light assembly you can get on ebay new or used OEM.
@chanhomoon126624 күн бұрын
@@kaimanson3174 thank you so much!!
@kaimanson317423 күн бұрын
@@chanhomoon1266 happy to help 👍 any question let me know.
@philongnguyen760426 күн бұрын
wow.. perfect demonstration installation, now waiting for MY 2024 LR RWD lol.. 🤣
@kaimanson317425 күн бұрын
LoL thanks, hopefully they come with something for the 2024. It is a great little addition to the RWD.
@saleemhosein4111Ай бұрын
Mine still doesn't work, brand new batteries.... after doing this
@kaimanson3174Ай бұрын
Possibly a bad batch, take it back and ask for a replacement.
@saleemhosein4111Ай бұрын
@kaimanson3174 , I can't. I purchased this tool about 2 years ago when they were on sale, thinking that the old one that I am still using would had stopped working. I did check the batteries about 6 months ago and they were good, but today I checked them and they were completely dead so I decided to put them to charge but of no luck. It's 4 batteries too
@kaimanson3174Ай бұрын
@@saleemhosein4111 oh i got it. Yeah i got two sets on sale a few years ago, and both were DOA. I was able to jump them and one came back to life the second worked but halfway... most likely a cell inside was already dead.
@mtsbaby414Ай бұрын
My outlet in the back not working when I plug the game up no power no nun uk where the fuse at for that socket?? Any one
@kaimanson317424 күн бұрын
Fuses are by the passenger kick panel.
@carlosgeiddcarvallo3720Ай бұрын
Hi, it is possible to replace the front outlet? Thanks
@kaimanson3174Ай бұрын
I'll check it out and report back. I'm sure it is replaceable.
@carlosgeiddcarvallo3720Ай бұрын
@@kaimanson3174 appreciate it!
@kaimanson3174Ай бұрын
@@carlosgeiddcarvallo3720Have you tested the fuses?...first check if all the fuses providing power to the outlets are ok. If not then it could be the actual power outlet. On the passenger side (kick panel) check fuse 9 (front outlet) 3 is (rear outlet) both are 15A.
@carlosgeiddcarvallo3720Ай бұрын
@@kaimanson3174 I did check those blue 15A fuses, and they’re ok, so I’m guessing is the outlet what’s dead, hope not the cables, thanks again
@kaimanson3174Ай бұрын
@@carlosgeiddcarvallo3720 OEM Part# CD8466290D02.
@jamesd.9955Ай бұрын
I got one of those thick walled sockets. Actually did the job with my less-than-powerful Harbour Freight impact. Bumped it for 1minute of so. Surprised.
@kaimanson3174Ай бұрын
Yeah those sockets can do magic with the right tool.
@Kiskassklan10 күн бұрын
Me too! I got the Bauer 1050 ft lbs and the weighted socket from Amazon. Took a few times but it came off.
@Brandon-yq1tmАй бұрын
"Just get a shop to do it" is probably the easiest and cheapest way for someone who doesn't own a press, yeah...
@kaimanson3174Ай бұрын
True, but I had to pay my dues. LoL. Love to work on my cars, knowing that I'm at least fixing something + labor sometimes can add up.
@OKeverydelАй бұрын
Will this be on the whole time or will it only light up whenever darkmode or headlights are on at night?
@kaimanson3174Ай бұрын
Great question, it works as the OEM. On at all times, I keep it at about 10% and it looks great. Battery impact is non-noticeable. When the car goes off the lights go off as well. Once you open the door lights come on.
@OKeverydelАй бұрын
@@kaimanson3174 Awesome! thank you for the answer, just ordered one.
@kaimanson3174Ай бұрын
@@OKeverydel happy to help 👍 any question let me know. It is a great addition to the RWD. Color can be set up via the app and stays the same until you decide to change it to something else thru the app.
@bibicreation5044Ай бұрын
Is it possible to give me the dimensions of this box?? Or anyone that ordered already!
@kaimanson3174Ай бұрын
I don't recall, but according to Amazon description 44.11 x 8.33 x 7.83 inches (package)
@johnhunter5699Ай бұрын
Nice job. What are the symptoms indicating for the replacement of the rear bumper stopper? Does it have to be done bilaterally? Thanks.
@kaimanson3174Ай бұрын
Thanks 👍, there were no symptoms per said , just cosmetic in my case. Usually if you carry a full van often, you will feel it in the back, especially those in the rear. I noticed they were looking rough while rotating the tires.
@craigjorgensen4637Ай бұрын
Maaco for the most part has this market to itself. Most conventional body shops hate doing complete paint shops and if asked will quote 4000.00 or more to discourage people.
@kaimanson3174Ай бұрын
Agree 👍
@theoneandonly6431Ай бұрын
Had my car painted at Maaco 3 and a half years ago. My only complaint was that when I picked it up, the interior was covered in shop dust. They could've had someone vacuum it out.
@kaimanson3174Ай бұрын
I believe ours had dust, but nothing crazy.
@racosta82Ай бұрын
Thank you very much friend, I just did it on my CX5 2014 and it was perfect.
@kaimanson3174Ай бұрын
Happy to help 👍 I initially changed the pump and the problem was still there, after more research I found out about that Y split that goes bad.
@jmagallon11112 ай бұрын
Great video super detail and informative. I want to try it myself but upon searching for fog lights how did you make sure the OEM you purchased had the actual lights working as opposed to the rwd variant which does not?
@kaimanson31742 ай бұрын
Great question, the set I bought were aftermarket...maybe in the future I will get an OEM set. I made sure the eBay listing showed fog lights were included. The RWD version has a blank cover.
@scottnunya24412 ай бұрын
FYi for those watching, the axle/hub nut for our 2008 Mazda 3 S is 1-1/4", not the 13MM seen here. Much bigger nut!!
@catpawjack76872 ай бұрын
your comment, right on time
@scottnunya2441Ай бұрын
@@catpawjack7687 Had to use a 1000 ft/lb impact set at 600 to get the drivers side nut off. 4 ft cheater bar with heat wouldn't budge it. Also, these nuts have the raised lip that is chiseled into the divit on the hub end, so be sure to stick a chisel or screwdriver into the bent piece and straighten it out before trying to turn the nut.
@kaimanson3174Ай бұрын
Thank you for the input. Didn't know there was a change by years.
@scottnunya24412 ай бұрын
Nice! Forgot Trans Fluid though! :>)
@kaimanson31742 ай бұрын
Someone else brought it up as well a few months ago. I believe I may have added some later on. Appreciate the reminder for other viewers.👍
@timholloway88212 ай бұрын
Look for a maaco with good reviews some of them are terrible.
@kaimanson31742 ай бұрын
This is key, as well go and stop by and see some jobs already done to see their quality.👍
@ProfessorOzone2 ай бұрын
How did you get the car there after removing the tail lights and other things?
@kaimanson31742 ай бұрын
Great question, I had everything loose but one bolt. The trunk's liner was already off to have easy access to that bolt. Once I got there I took it off and out with the lights. Same thing with the side markers. When I got the car back I put that bolt back and drove it home and put everything together. Sadly I didn't have enough time to remove the headlights.
@tapiaisautismo43942 ай бұрын
How much did it all cost? With the prep work and your estimate?
@kaimanson31742 ай бұрын
Exactly $1170 in 2019.
@shavonwoods2 ай бұрын
Thank you, thank you, thank you
@kaimanson31742 ай бұрын
Your welcome 😁 happy to help 👍
@JESSSSMITH2 ай бұрын
Hey, revisiting the install video you posted. Looks like Hansshow pulled there Model 3 SR Premium Audio Upgrade due to the issues with software etc. By chance are you experiencing a thumping sound while call audio is off and you're in park? I hear a phantom sound coming from the sub. Do you have this issue at all?
@kaimanson31742 ай бұрын
I get sometimes if the car is parked for a while (especially after work), a thumping noise coming from the dashboard driver side speakers. It might make the noise like two or three times and it goes away. Most of the time when I get in I play music, so I never hear that noise. Regarding the phantom from the Sub, I don't have that issue. The issue with the Hansshow kit was the navigation voice. I rarely use the navigation and to be honest for me it sounds the same. Sadly they took it out of stock. That kit has a great potential, especially with so many RWD out in the streets.
@jboyybeatz2 ай бұрын
Thank you for posting this. I just completed the install with an OEM fog light switch from the junk yard today. Your wiring helped me so much when it came to the OEM switch.
@kaimanson31742 ай бұрын
Amazing! Happy to help 👍 clean installation is the best way to go. Any questions let me know.
@Azmera_2 ай бұрын
The legs aren’t labeled A nor B on the one I received and I honestly cannot tell which is which. Is leg B the one that has Row n Ride on it or is that leg A
@kaimanson31742 ай бұрын
Check the rubbers at the edge of each leg. Each one has a particular cut. The A has a flatter surface, while the B has smaller ridges. @1:13
@Filtee3 ай бұрын
Did you need to change the seal we see at 5:08 ? If yes did it come with the new axle or did you have to buy it appart ? If you have the name or part number that would be awesome !
@kaimanson31743 ай бұрын
I didn't have to replace the seal, I believe the name is output shalf seal, here is the part # OEM www.jimellismazdaparts.com/products/Mazda/2004/Mazda-3/Seal-Axle-Shaft/1853326/F00327238C.html Any questions let me know.
@MrunalChowdaryKosaraju3 ай бұрын
Hey, I own a 2023 model 3 and was wondering if I use the harness with the stock fog lights will they work? or they dummy fog lights?. your reply would help me a lot!
@kaimanson31743 ай бұрын
Sadly the stock fog lights in the RWD are dummy lights. Once you remove them you will see a black cover where the led bulb should be. You need to get the harness and a set of aftermarket or OEM fog lights. Any questions let me know, happy to help 👍
@MrunalChowdaryKosaraju3 ай бұрын
@@kaimanson3174 thank you so much for your reply! It really means a lot!! I’m a beginner and just got into modifying my car. Do you recommend me doing it on my own?? I watch your video and it really shows the step by step process. But still a bit nervous…what do you say?
@kaimanson31743 ай бұрын
@@MrunalChowdaryKosaraju go for it, I'm here to help. The process is really straight forward, these cars are really like a computer. Plug and play most of the time. Let me know if you have any questions in the process. You can practice while at home, remove the cover as shown in the video and see where everything is located and then put it back on. I usually do this when doing something new in the car.
@mtom9267Ай бұрын
Wait so I have a 2024 Model y rwd. I am installing aftermarket fog-lights, My fog light has a black cover but has a led on amber. I was planning on splicing that wire into the positive for the fog light. Would this work?
@kaimanson3174Ай бұрын
@@mtom9267 Model Y it should work as well. It shares the same fog lights as the model 3.
@wakanfident3 ай бұрын
You are a Godsend. Thanks so much!! 😊
@kaimanson31743 ай бұрын
Happy to help 👍
@forestcamper13 ай бұрын
hope this could work for MY RWD as well. MY RWD does not have fog light.
@kaimanson31743 ай бұрын
It should work, they share the same headlight and fog lights as well. Connectors are the same. I didn't know, the MY RWD didn't come with fog lights. Any questions let me know 👍
@forestcamper13 ай бұрын
@@kaimanson3174 i will try. thx! i might ask you questions when i try to install them :) btw, basically the harness is connected to Head lights, right? with the Y like cable that you used.
@kaimanson31743 ай бұрын
@@forestcamper1 you got it. Correct....the OEM harness that goes into the Headlight goes into the adapter (input), the adapter has two wire harnesses on the other side (output)..one continues to the headlight itself, and the second one to the fog light. The OEM harness going into the fog light is left covered somewhere in the bay.
@forestcamper13 ай бұрын
@@kaimanson3174 also the aliexpress product, should order 2 or just 1. product detail does not really say its pair or just 1 harness.
@kaimanson31743 ай бұрын
@forestcamper1 one, brings a set of 2 adapters. Make sure to select the "headlight" adapter.
@ngkayui3 ай бұрын
i can NEVER get the original one out no matter how I pried , unless I break it
@kaimanson31743 ай бұрын
Yeah, it is a bit tricky. The key is to use a small flat screwdriver to pry it out. Any questions let me know.
@karrielenora3 ай бұрын
Thank you so much. My husband had a question concerning the middle connecting bar . I pulled up this video and everything was smooth sailing from there. Thank you.
@kaimanson31743 ай бұрын
No problem, Happy to assist 😊👍any question let me know.
@noreenn69763 ай бұрын
they did a nice job! How is it holding up?
@kaimanson31743 ай бұрын
We sold the car about a year ago, it was still looking good as new.
@Redsun698133 ай бұрын
Thank you. I got mine 2 days ago and felt frustrated like most. I found your video today and assembled it in about 15 mins. Thank you much
@kaimanson31743 ай бұрын
Awesome 😊, happy to help 👍 any question let me know.
@Ronniejamesleo3 ай бұрын
I broke my tilt lever trying to tske out bottom piece 😮 im calling the locksmith he can deal with it. These oddesseys suck
@kaimanson31743 ай бұрын
Sorry to hear that. The lower trim is a nightmare to fully remove. I left it there hanging instead, just enough space to remove the ignition switch.
@keerose47693 ай бұрын
I put everything else together except the seat part
@kaimanson31743 ай бұрын
Any question let me know.
@keerose47693 ай бұрын
@@kaimanson3174 man I gotta lot of questions
@davidlaws14383 ай бұрын
Looking good ❤
@kaimanson31743 ай бұрын
Thank you, happy to help 👍
@ameerzulfiquar21114 ай бұрын
I want to do exactly what you did wrapping right? You should advice further on how to do it
@kaimanson31744 ай бұрын
Any question let me know, happy to help. It was a new aftermarket bumper.
@ameerzulfiquar21114 ай бұрын
@@kaimanson3174 oh okay looks nice brother im planning to wrap mine black matte
@heiwachowa31294 ай бұрын
I really appreciate your no talking visual video that was easy to follow. I thought my assembly was off but you confirmed that I did everything correctly. Thank you for a great instructive video!
@kaimanson31744 ай бұрын
Glad I was able to help. 👍
@lloydhuff49574 ай бұрын
I have a2006 and unable to remove lower cover after removal of the three screws. what year is this odyessy? any advise would be appreciated
@kaimanson31744 ай бұрын
Mine is a 2008. The game is to remove as much as possible of the covers to have enough space to remove the ignition switch. I didn't remove the whole cover, it was a bit of a mission and as in your case the lever was on the way.
@lloydhuff49574 ай бұрын
uable to remove lower shroud to access ignition switch. our is a 2006 model. the lever is in the way.
@kaimanson31744 ай бұрын
Try to remove as much of the lower trim. To have enough space to pull the switch out. I couldn't remove the whole trim as well.
@yvonnerobinson47204 ай бұрын
This video was extremely helpful
@kaimanson31744 ай бұрын
Awesome! Happy to help 👍
@BilluAwann4 ай бұрын
Price ?
@kaimanson31744 ай бұрын
It was near $1200.
@arrozconpollo46754 ай бұрын
Anyone with a Miami Dolphins Shirt is a good man!!! I’m building mine now!!
@kaimanson31744 ай бұрын
LoL that shirt is still hanging around the house. Happy to help 👍
@yassinekilali42264 ай бұрын
Hi from France 😊, Can I install the pack on M3 standard range + ?
@kaimanson31744 ай бұрын
Bonjour! According to the site it works with years (2019-2024)
@dystopian_204 ай бұрын
WHERE DO I FIND THE STEERING KNUCKLE?!?!? I’ve been looking for it for 3 weeks.
Пікірлер
Thank you for the video. Had my door handle fixed in 10 mins.
@@christy0787 awesome 👍 Happy to help and even better a fully functioning door handle.
This is easy to forget lol 🤣 Scrolling through the infotainment system like where the hell is it!
@@slapskate yep, I'm with you. Sometimes I have to watch my own videos 😂
Qué exageración tan facil y sencillo de montar
@@sandrasantiago7527 asi es Sandra, se ve complicado pero en realidad es super facil. 👍
Bro thank you for this and the cv axle video, conveniently enough I've had both of these fail on me at the exact same time and your videos on the replacement procedure have been fantastic.
@@CommonInsider ur welcome brother, happy to help 👍
Thanks, for the share. Its very obvious, more simple only if I hold the lamp and you rotate de planet
@@ebekman Happy help 👍 trust me the first time I did it, I didn't have any clue how to get it off. Once I finally figured it out....I had to make a video about it to save others from going insane 😜
Do you the size of the Allen wrench? Thanks for the info.
Hey Mauro, I don't recall the size. Maybe one of the viewers can shine in on that.
Great video! Why did you remove the upper front end link? I don’t see anything attached to the knuckle (on the strut) as the bottom link end connects to the sway bar. Curious and maybe others can skip this step like I’m going to try to lol
Thanks, great question. It was because I was replacing the wheel bearing as well. So I ended up taking the whole thing out. Happy to help 👍
could you tell me where you got the fog light kit please??
The adapters you can get it here. a.aliexpress.com/_mtNvZSY
@@kaimanson3174 what about the fog light? so sorry for bothering you.
The fog light assembly you can get on ebay new or used OEM.
@@kaimanson3174 thank you so much!!
@@chanhomoon1266 happy to help 👍 any question let me know.
wow.. perfect demonstration installation, now waiting for MY 2024 LR RWD lol.. 🤣
LoL thanks, hopefully they come with something for the 2024. It is a great little addition to the RWD.
Mine still doesn't work, brand new batteries.... after doing this
Possibly a bad batch, take it back and ask for a replacement.
@kaimanson3174 , I can't. I purchased this tool about 2 years ago when they were on sale, thinking that the old one that I am still using would had stopped working. I did check the batteries about 6 months ago and they were good, but today I checked them and they were completely dead so I decided to put them to charge but of no luck. It's 4 batteries too
@@saleemhosein4111 oh i got it. Yeah i got two sets on sale a few years ago, and both were DOA. I was able to jump them and one came back to life the second worked but halfway... most likely a cell inside was already dead.
My outlet in the back not working when I plug the game up no power no nun uk where the fuse at for that socket?? Any one
Fuses are by the passenger kick panel.
Hi, it is possible to replace the front outlet? Thanks
I'll check it out and report back. I'm sure it is replaceable.
@@kaimanson3174 appreciate it!
@@carlosgeiddcarvallo3720Have you tested the fuses?...first check if all the fuses providing power to the outlets are ok. If not then it could be the actual power outlet. On the passenger side (kick panel) check fuse 9 (front outlet) 3 is (rear outlet) both are 15A.
@@kaimanson3174 I did check those blue 15A fuses, and they’re ok, so I’m guessing is the outlet what’s dead, hope not the cables, thanks again
@@carlosgeiddcarvallo3720 OEM Part# CD8466290D02.
I got one of those thick walled sockets. Actually did the job with my less-than-powerful Harbour Freight impact. Bumped it for 1minute of so. Surprised.
Yeah those sockets can do magic with the right tool.
Me too! I got the Bauer 1050 ft lbs and the weighted socket from Amazon. Took a few times but it came off.
"Just get a shop to do it" is probably the easiest and cheapest way for someone who doesn't own a press, yeah...
True, but I had to pay my dues. LoL. Love to work on my cars, knowing that I'm at least fixing something + labor sometimes can add up.
Will this be on the whole time or will it only light up whenever darkmode or headlights are on at night?
Great question, it works as the OEM. On at all times, I keep it at about 10% and it looks great. Battery impact is non-noticeable. When the car goes off the lights go off as well. Once you open the door lights come on.
@@kaimanson3174 Awesome! thank you for the answer, just ordered one.
@@OKeverydel happy to help 👍 any question let me know. It is a great addition to the RWD. Color can be set up via the app and stays the same until you decide to change it to something else thru the app.
Is it possible to give me the dimensions of this box?? Or anyone that ordered already!
I don't recall, but according to Amazon description 44.11 x 8.33 x 7.83 inches (package)
Nice job. What are the symptoms indicating for the replacement of the rear bumper stopper? Does it have to be done bilaterally? Thanks.
Thanks 👍, there were no symptoms per said , just cosmetic in my case. Usually if you carry a full van often, you will feel it in the back, especially those in the rear. I noticed they were looking rough while rotating the tires.
Maaco for the most part has this market to itself. Most conventional body shops hate doing complete paint shops and if asked will quote 4000.00 or more to discourage people.
Agree 👍
Had my car painted at Maaco 3 and a half years ago. My only complaint was that when I picked it up, the interior was covered in shop dust. They could've had someone vacuum it out.
I believe ours had dust, but nothing crazy.
Thank you very much friend, I just did it on my CX5 2014 and it was perfect.
Happy to help 👍 I initially changed the pump and the problem was still there, after more research I found out about that Y split that goes bad.
Great video super detail and informative. I want to try it myself but upon searching for fog lights how did you make sure the OEM you purchased had the actual lights working as opposed to the rwd variant which does not?
Great question, the set I bought were aftermarket...maybe in the future I will get an OEM set. I made sure the eBay listing showed fog lights were included. The RWD version has a blank cover.
FYi for those watching, the axle/hub nut for our 2008 Mazda 3 S is 1-1/4", not the 13MM seen here. Much bigger nut!!
your comment, right on time
@@catpawjack7687 Had to use a 1000 ft/lb impact set at 600 to get the drivers side nut off. 4 ft cheater bar with heat wouldn't budge it. Also, these nuts have the raised lip that is chiseled into the divit on the hub end, so be sure to stick a chisel or screwdriver into the bent piece and straighten it out before trying to turn the nut.
Thank you for the input. Didn't know there was a change by years.
Nice! Forgot Trans Fluid though! :>)
Someone else brought it up as well a few months ago. I believe I may have added some later on. Appreciate the reminder for other viewers.👍
Look for a maaco with good reviews some of them are terrible.
This is key, as well go and stop by and see some jobs already done to see their quality.👍
How did you get the car there after removing the tail lights and other things?
Great question, I had everything loose but one bolt. The trunk's liner was already off to have easy access to that bolt. Once I got there I took it off and out with the lights. Same thing with the side markers. When I got the car back I put that bolt back and drove it home and put everything together. Sadly I didn't have enough time to remove the headlights.
How much did it all cost? With the prep work and your estimate?
Exactly $1170 in 2019.
Thank you, thank you, thank you
Your welcome 😁 happy to help 👍
Hey, revisiting the install video you posted. Looks like Hansshow pulled there Model 3 SR Premium Audio Upgrade due to the issues with software etc. By chance are you experiencing a thumping sound while call audio is off and you're in park? I hear a phantom sound coming from the sub. Do you have this issue at all?
I get sometimes if the car is parked for a while (especially after work), a thumping noise coming from the dashboard driver side speakers. It might make the noise like two or three times and it goes away. Most of the time when I get in I play music, so I never hear that noise. Regarding the phantom from the Sub, I don't have that issue. The issue with the Hansshow kit was the navigation voice. I rarely use the navigation and to be honest for me it sounds the same. Sadly they took it out of stock. That kit has a great potential, especially with so many RWD out in the streets.
Thank you for posting this. I just completed the install with an OEM fog light switch from the junk yard today. Your wiring helped me so much when it came to the OEM switch.
Amazing! Happy to help 👍 clean installation is the best way to go. Any questions let me know.
The legs aren’t labeled A nor B on the one I received and I honestly cannot tell which is which. Is leg B the one that has Row n Ride on it or is that leg A
Check the rubbers at the edge of each leg. Each one has a particular cut. The A has a flatter surface, while the B has smaller ridges. @1:13
Did you need to change the seal we see at 5:08 ? If yes did it come with the new axle or did you have to buy it appart ? If you have the name or part number that would be awesome !
I didn't have to replace the seal, I believe the name is output shalf seal, here is the part # OEM www.jimellismazdaparts.com/products/Mazda/2004/Mazda-3/Seal-Axle-Shaft/1853326/F00327238C.html Any questions let me know.
Hey, I own a 2023 model 3 and was wondering if I use the harness with the stock fog lights will they work? or they dummy fog lights?. your reply would help me a lot!
Sadly the stock fog lights in the RWD are dummy lights. Once you remove them you will see a black cover where the led bulb should be. You need to get the harness and a set of aftermarket or OEM fog lights. Any questions let me know, happy to help 👍
@@kaimanson3174 thank you so much for your reply! It really means a lot!! I’m a beginner and just got into modifying my car. Do you recommend me doing it on my own?? I watch your video and it really shows the step by step process. But still a bit nervous…what do you say?
@@MrunalChowdaryKosaraju go for it, I'm here to help. The process is really straight forward, these cars are really like a computer. Plug and play most of the time. Let me know if you have any questions in the process. You can practice while at home, remove the cover as shown in the video and see where everything is located and then put it back on. I usually do this when doing something new in the car.
Wait so I have a 2024 Model y rwd. I am installing aftermarket fog-lights, My fog light has a black cover but has a led on amber. I was planning on splicing that wire into the positive for the fog light. Would this work?
@@mtom9267 Model Y it should work as well. It shares the same fog lights as the model 3.
You are a Godsend. Thanks so much!! 😊
Happy to help 👍
hope this could work for MY RWD as well. MY RWD does not have fog light.
It should work, they share the same headlight and fog lights as well. Connectors are the same. I didn't know, the MY RWD didn't come with fog lights. Any questions let me know 👍
@@kaimanson3174 i will try. thx! i might ask you questions when i try to install them :) btw, basically the harness is connected to Head lights, right? with the Y like cable that you used.
@@forestcamper1 you got it. Correct....the OEM harness that goes into the Headlight goes into the adapter (input), the adapter has two wire harnesses on the other side (output)..one continues to the headlight itself, and the second one to the fog light. The OEM harness going into the fog light is left covered somewhere in the bay.
@@kaimanson3174 also the aliexpress product, should order 2 or just 1. product detail does not really say its pair or just 1 harness.
@forestcamper1 one, brings a set of 2 adapters. Make sure to select the "headlight" adapter.
i can NEVER get the original one out no matter how I pried , unless I break it
Yeah, it is a bit tricky. The key is to use a small flat screwdriver to pry it out. Any questions let me know.
Thank you so much. My husband had a question concerning the middle connecting bar . I pulled up this video and everything was smooth sailing from there. Thank you.
No problem, Happy to assist 😊👍any question let me know.
they did a nice job! How is it holding up?
We sold the car about a year ago, it was still looking good as new.
Thank you. I got mine 2 days ago and felt frustrated like most. I found your video today and assembled it in about 15 mins. Thank you much
Awesome 😊, happy to help 👍 any question let me know.
I broke my tilt lever trying to tske out bottom piece 😮 im calling the locksmith he can deal with it. These oddesseys suck
Sorry to hear that. The lower trim is a nightmare to fully remove. I left it there hanging instead, just enough space to remove the ignition switch.
I put everything else together except the seat part
Any question let me know.
@@kaimanson3174 man I gotta lot of questions
Looking good ❤
Thank you, happy to help 👍
I want to do exactly what you did wrapping right? You should advice further on how to do it
Any question let me know, happy to help. It was a new aftermarket bumper.
@@kaimanson3174 oh okay looks nice brother im planning to wrap mine black matte
I really appreciate your no talking visual video that was easy to follow. I thought my assembly was off but you confirmed that I did everything correctly. Thank you for a great instructive video!
Glad I was able to help. 👍
I have a2006 and unable to remove lower cover after removal of the three screws. what year is this odyessy? any advise would be appreciated
Mine is a 2008. The game is to remove as much as possible of the covers to have enough space to remove the ignition switch. I didn't remove the whole cover, it was a bit of a mission and as in your case the lever was on the way.
uable to remove lower shroud to access ignition switch. our is a 2006 model. the lever is in the way.
Try to remove as much of the lower trim. To have enough space to pull the switch out. I couldn't remove the whole trim as well.
This video was extremely helpful
Awesome! Happy to help 👍
Price ?
It was near $1200.
Anyone with a Miami Dolphins Shirt is a good man!!! I’m building mine now!!
LoL that shirt is still hanging around the house. Happy to help 👍
Hi from France 😊, Can I install the pack on M3 standard range + ?
Bonjour! According to the site it works with years (2019-2024)
WHERE DO I FIND THE STEERING KNUCKLE?!?!? I’ve been looking for it for 3 weeks.
Check rockauto.com