Пікірлер

• 
  @stealthbomber21272 күн бұрын

  I use bleach, not the watered down kind, but the good stuff. Super Clean works great too.

• 
  @danweiss13714 күн бұрын

  Looks good. Thanks for the info.

• 
  @TimePilot20844 күн бұрын

  I 3D print bodies for my radio controlled vehicles and recently bought a cheap cordless airbrush to attempt to paint them. I love the fact that you're using floor gloss and car wax for the shine. Excellent tutorial!

• 
  @Sean-Paul-yo9rl10 күн бұрын

  Thanks mate. I can understand you.......And remember you keep building them and I will keep watching them.👍.

• 
  @tedulmer788015 күн бұрын

  I used to use xmas tinsel back in the '70s

• 
  @LifefeedsonLife24 күн бұрын

  I love model tutorials…hate the music. Had to put on Pantera after this

• 
  @DMAbCDАй бұрын

  Thank you for sharing these awesome tips. This expands color possibilities. Does the Pledge ever loose it's shiny effect? Thank you

• 
  @OdysseyAviationАй бұрын

  Do I need to put water in the back ?

• 
  @LTV_incАй бұрын

  Why not just use actual tint film?

• 
  @Thunderb0lt-64Ай бұрын

  Nice, very nice! 🔥🔥🔥 thank you. I enjoy this method of painting it gives the casting a personality

• 
  @brucecroft9262Ай бұрын

  Thanks for the unboxing I was sitting at my couch with that exact kit in my hand it's the next one I'm going to start

• 
  @GrandNational66Ай бұрын

  My exhaust manifold is a piece of shit so are the scripts on both side are not equally prominent.

• 
  @ShadowGearFive2 ай бұрын

  Does this also work if i use the usual scale modelling glue, like from tamiya? Or does it need a specific glue?

• 
  @CustomScaleModelsАй бұрын

  It will not work with model glue. Most model glues melt the styrene together but won’t stick to aluminum. You need an all purpose glue.

• 
  @ShadowGearFiveАй бұрын

  @@CustomScaleModels Thanks for the advice!

• 
  @danielcumberland29672 ай бұрын

  Does it remove paint?

• 
  @CustomScaleModels2 ай бұрын

  Yes it does

• 
  @chesterlewis-iq3rp2 ай бұрын

  That came out great

• 
  @HakkiOgrt2 ай бұрын

  thanks , I was looking for video for the first try

• 
  @lRAQl2 ай бұрын

  Margenta, Siren 😁😁😁😁😁😁

• 
  @dytrap9182 ай бұрын

  This is so simple and time saving, I don't have to go down to a hobby store to buy some fancy thing then come back

• 
  @theunknownanonymous77952 ай бұрын

  Would replacing the elmers glue with cement glue work too?

• 
  @user-sd5go4rr4i2 ай бұрын

  I build plastic model cars and would it be best to primer first? I'm also a beginner.

• 
  @CustomScaleModels2 ай бұрын

  It does adhere better with primer

• 
  @user-sd5go4rr4i2 ай бұрын

  @@CustomScaleModels Very good. Thanks..

• 
  @Grayman582 ай бұрын

  I done my mustang p51 . With black drafting pen similar process

• 
  @HeavyMetalTurtles2 ай бұрын

  Can you use the same thing to make a flesh tone on a t-shirt like that

• 
  @davidrivero79432 ай бұрын

  If you put that on moldy walkway & scrub with a heavy brush the concrete will turn Orange & after a wash and second scrubbing it will look like its been pressured cleaned. Wear gloves , it will take your skin off , its that powerful.

• 
  @MsSplashIt2 ай бұрын

  Great tip. Thanks for that

• 
  @danrussell34392 ай бұрын

  Looks amazing

• 
  @user-sd5go4rr4i2 ай бұрын

  One of the rim sets isn't shown in the instructions. The decals are not shown in the instructions. Total rank amateurs round 2 is.

• 
  @louisegrimhelm30412 ай бұрын

  I've been looking to do this exact conversion to this exact model. Thanks

• 
  @mayhemgarage802 ай бұрын

  How long should a guy let the craft paint dry for before handling? I tried doing the salt method for rusting one of my model kits and the craft paint literally fell right off the model, going to strip it and start over

• 
  @corvanha13 ай бұрын

  To prevent tearing of the foil I take a rounded blade knife.

• 
  @SeatSniffer19443 ай бұрын

  “This is dirt I got this from outside” 😂

• 
  @j.h.customsireland3 ай бұрын

  Could i use the same method for steel texturing and zimmeret

• 
  @justcraig10003 ай бұрын

  You can cut bottom of water bottle off very useful for many things

• 
  @Pinkys-one-offs3 ай бұрын

  Did you stop doing videos.

• 
  @CustomScaleModels3 ай бұрын

  I didn’t. I’m going to come back. Life’s just been getting in the way.

• 
  @Pinkys-one-offs3 ай бұрын

  @@CustomScaleModels thanks for getting back I understand life can get in the way it's been 43 years since I put a model together and now I'm going back to it lol

• 
  @CustomScaleModels3 ай бұрын

  Yeah it’s hard to make time with young kids and a family. the majority of my free time right now I spend on my 3d business selling 3d resin parts for our models. But yeah eventually I’ll come back. Hopefully soon. I miss making videos

• 
  @Phillyfpv3 ай бұрын

  Fantastic how it can peel off, only issue is it looks frosted!? Is there a way to make it completely clear and peelable?

• 
  @tajhayes78414 ай бұрын

  THNX 4 this info man!!

• 
  @johnrodriguez4894 ай бұрын

  Niceeee!

• 
  @rogerleaf37244 ай бұрын

  Thanks CSM first. Luckily to find this only vid as I took a lot of time to find out if 0.5 nozzle cap is required. Knowing that argument to have the 0.5 nozzle cap for conversion still exists, I tested with my own HP-CS with new 0.5 nozzle and 0.5 needle but without changing of the original nozzle cap. I found the 0.5 converted airbrush works very well with fast, heavy and even spraying by using AV paints, although I have no idea how good if a 0.5 nozzle cap is added. I have reverted to 0.35 setting as the original setting has been working very well under AV paints.

• 
  @eerwin24944 ай бұрын

  Thanks! Cardboard trick worked nicely!

• 
  @thomartinthroat4 ай бұрын

  How do you clean your airbrush after using the pledge? Just soapy water ? I only have one, dont want to ruin it. Thank you, nice and informative video

• 
  @kanstudio934 ай бұрын

  What code spray gun do you use?

• 
  @genepalmer16934 ай бұрын

  So it's just distilled water

• 
  @snoopu26014 ай бұрын

  Keep the hobby going. I know the price has went way up since I was a kid 40 year's ago so we want to do the best job we can on putting them together. It's a pricey mistakes to do a redue.

• 
  @snoopu26014 ай бұрын

  Yeah Mon I get it, thanks very much for sharing 👍🏽

• 
  @D-M-W5 ай бұрын

  Excellent idea. Thanks buddy keep doing this great hobby. I love ❤️ people who are addicted to this stuff. God bless you. 😊

• 
  @duckmangooo73765 ай бұрын

  Been wanting to do a better way to create chrome trim. Thank you,

• 
  @oldskolacura97985 ай бұрын

  I use a fine brush.

• 
  @catlady83245 ай бұрын

  0:26 He said “Doo doo”! 💩

• 
  @Longhunter3935 ай бұрын

  Man, thank you so much for posting the best video on this! The icing on the cake is that you get straight to the point, clear audio, no frills, no stupid intros.

• 
  @P-47D_theJug5 ай бұрын

  Two pieces of plywood rotate and pull through with the grain

• 
  @coreymckenzie89455 ай бұрын

  I've been using techniques like yours in building remote control mini trucks and learned so much. Didn't think of the hinge for the side door. Might use that for my 24th scale rc off road food truck I have started on