Now do something about all that clutter throughout your house. That is not healthy sorry truth be told
@erinrisiАй бұрын
Thank you for the easy instructions, especially at the end. I also didn’t have the ribbon seated correctly initially. You saved me from panicking about that. I saved a few hundred bucks!
@johnstrassner80612 ай бұрын
Tell me you’re in the military without telling me you’re in the military…😂 you made it so easy a supply guy could do it.
@stevenash39492 ай бұрын
😂 thanks! Hope it helped.
@chungathvideos2 ай бұрын
Whre did you buy the parts?
@jarvise.81663 ай бұрын
Just thought you might want to know, the manual for our RoadTrek Popular 200 Chevrolet states when sanitizing the potable water system to add 1/4 cup of bleach to 1 gallon of water, then to add a (1) gallon of the water/bleach mixture to every 15 gallons capacity of your water tank. Our tank is 35 gallons, therefore we only need to add 9-1/3-oz of bleach to our tank to sanitize it, not 1/4 cup per gallon of capacity. Your system will most certainly be sanitized though!
@user-mm7xw8jt5q5 ай бұрын
Have the same problem. Samsung appliances are junk
@DannySchlitt5 ай бұрын
This helped me replace the magnetek 7300 in my r vision trail lite camper. Thank you!
@stevenash39492 ай бұрын
Absolutely! Happy it helped. Thanks for the comment!
@brianbaker3596 ай бұрын
Did ours today as the parts company had a 10% off sale at Christmas and decided to not delay any longer. I screwed up on the reinstallation of the ribbon wire on the extreme left side as I didn’t have the ribbon in squarely and fully and I got screwy outputs on the display. Corrected that after unplugging the power cord and redoing ribbon strip and small white plastic holder. Still pissed at Samsung for manufacturing such a defective display and even more 8:07 so for such an exorbitant price for such a simple part. Samsung, never again an appliance customer of yours.
@stevenash39493 ай бұрын
This project was something I was helping my parents with and now my oven is doing the same thing. Definitely unimpressed with the quality of these Samsung components as well.
@vb50378 ай бұрын
Samsung suck I don't buy there product no more,
@tigerbunny67788 ай бұрын
Thanks!
@evalyngaskell81049 ай бұрын
Wonderful Step by Step Instructions. Thank you so much.
@stevenash39492 ай бұрын
Thank you! Hope it helped.
@bgregg559 ай бұрын
That circuit board says WARNING: HIGH VOLT which means at least somewhere on it there is mains voltage (120v in USA). I'm just amazed you didnt short out the board at the very least.
@raymondbaldonado35638 ай бұрын
Ya I work on live switches and outlets all the time but I'd never work on a control board live for fear of tha
@stevenash39493 ай бұрын
LED panels are stepped down to 5v. Was not working with the high voltage heating elements. As you can see, I did not short anything out. If this is not a method you feel comfortable with, feel free to make a video and post it up. I searched for an instructional video on this fix and was not successful.
@ASAANLLC10 ай бұрын
Hi - by mistake i removed 'edge connection' power supply from the PCB. My control panel is now power less. PCB Part # DE96-01027A Can we "again" solder the edge connections ..?
@kadesmom10011 ай бұрын
Thanks! Exactly what I needed
@stevenash394911 ай бұрын
Happy to hear it helped! Hope you are able to get it fixed easily enough.
@stevenash394911 ай бұрын
Happy to hear it helped! Hope you are able to get it fixed easily enough.
@flhxs8364 Жыл бұрын
I just ordered a Boondocker 1245 PC for my 2001 Chinook Concourse. This video will be very helpful. Thanks!
@stevenash39492 ай бұрын
Hope the install went smoothly and you are enjoying your new converter.
@dinkydoo4994 Жыл бұрын
Thank you, yours is the 1st to help with our range. Our Samsumg Range was purchased during kitchen remodel in 2009. Has worked for us after all these years, except recently the left side elements running on high occasionally. The side that was used the most. Now our LED display numbers don't look like numbers. This particular replacement part is $100 +. Other than that, we've been satisfied with this range.
@stevenash394911 ай бұрын
Happy it helped! As I said to a previous viewer, I left power on the range because these displays are stepped down to about 5 volts. I would recommend unplugging the range if you are replacing anything with the heating elements. Best of luck to you!
@annmcwilliams7001 Жыл бұрын
I just replaced mine and as I was putting everything back together I noticed a black wire with a metal ring on it that was hanging loose. I don’t remember it being under any of the screws that I took out but I don’t know what to do with it. It’s two black wires coming out of the right side that come together to one of those metal rings that look like they’re supposed to be held in place with a screw. Any ideas?
@Grits420 Жыл бұрын
That sounds like a ground wire. Put it make sure its held down by a screw. Its very important
@stevenash394911 ай бұрын
Yeah, I would agree with the ground wire possibly. You could look back at the point when I had the back cover removed and see if you can find where that black wire may connect.
@lwc2009 Жыл бұрын
I have a 2003 Chevy 190 Popular...does anyone know where the fresh water tank drain valve is located or if there even is one??? thank you....
@hallierider3076 Жыл бұрын
Thank you for this video!!! Have a 1996 Versatile purchased before Covid. Has given me a run for my money but am going to persist in repairing. The new Roadtreks have nothing on the older units especially for ventilation.
@stevenash3949 Жыл бұрын
Absolutely! Hope it helped! Yeah, this beast has been in our family for three generations now. Have a lot of sentimental reasons for keeping her healthy.
@michaelrhodes1465 Жыл бұрын
I would unplug it or shut off the power at the circuit breaker before doing this work. These are high voltage appliances.
@stevenash3949 Жыл бұрын
Thanks for watching! Disconnecting power is definitely the safe option. I tend to keep power going for troubleshooting and instant gratification purposes. And yes these are high voltage in general and if troubleshooting a different component on the appliance I would definitely consider disconnecting power. But the displays on these are typically stepped down to around 5 volts.
@RP-fv7do4 ай бұрын
I cringed when I saw your son working on that project with power still on.@@stevenash3949
@brianbaker359 Жыл бұрын
Ours is flickering as well but I can live with that although I am wondering whether the flickering is a precursor to a complete failure meaning the stove would not be usable. Has anyone waited until it fails? Secondly, what kind of assurances does anyone have that the replacement display doesn’t start flickering a year or two after installation as they are likely all from the same manufacturer.
@stevenash3949 Жыл бұрын
Can’t tell you about the results after a year or two. But I can tell you in 7 months my parents haven’t had any further issues with the display or range. Up to personal preference on the choice to await total failure. I spent 10 days at my parents house last summer and thought I was going to have seizure after day two of looking at that display and my mom had mentioned it to me a few times previously. So I figured I’d be a good son and remind my parents why I’m their favorite 😉
@lisao3041 Жыл бұрын
Don't use the self cleaning feature on the range. I'm pretty sure that's what caused mine to flicker. It just gets too hot and starts to fry more delicate components.
@filosofocrates13 Жыл бұрын
@@lisao3041I have never used the self cleaning before and I also have the flickering problem ☠️
@dakota2502 Жыл бұрын
Bonjour..c'est koi le numéro de la pièce svp..merci
@stevenash3949 Жыл бұрын
Bonjour et merci d'avoir regardé ! Le numéro de pièce pour l'affichage LED sur cette gamme spécifique est DE07-00129A. J'ai mis le lien Amazon dans la description.
@dakota2502 Жыл бұрын
@@stevenash3949 merci!🙂
@devaughnharper7418 Жыл бұрын
How much is the part from Amazon? Can someone please provide a link to it?
@stevenash3949 Жыл бұрын
Thought I added it to the description. Rookie move on my part. Samsung DE07-00129A LED Display... www.amazon.com/dp/B01BN0AX7A?ref=ppx_pop_mob_ap_share
@naterose9856 Жыл бұрын
Thanks same problem here, going to replace when part arrives! Hopefully I remember the ribbon lol
@stevenash3949 Жыл бұрын
Hope it helps! Yeah, I wasn’t going to add that fumble, but I figured it would help people save a couple minutes.
@stanacho854 Жыл бұрын
Hi Steve: Appreciate you sharing your video and spending the time to do so. I don't encourage having kids coming anywhere near electrical devices because one miss and he could be electrocuted. Hope you understand my concern.
@stevenash3949 Жыл бұрын
Thanks! Hope the video was helpful
@jasonbedwell3408 Жыл бұрын
thanks ,was helpful
@stevenash3949 Жыл бұрын
Thanks! Happy to hear!
@jacobcarlson9098 Жыл бұрын
𝘱𝘳𝘰𝘮𝘰𝘴𝘮
@floridagator12122 жыл бұрын
Thank you for the amazing video!! Question from this newbie and hope it doesn’t sound silly: if the water heater tank is full and the fresh water tanks are being drained using the water pump, does this method drain the water heater as well?
@stevenash39492 жыл бұрын
Thanks for the feedback! No worries. That’s a question I’ve had and have heard asked many times. No, the water pump will not drain out the hot water heater. You have to pull the anode to drain the tank.
@cathyhennessey90182 жыл бұрын
Thank you very much
@AmpuTeeHee2 жыл бұрын
Very helpful! Thank you & safe+happy travels!
@chrismoen27022 жыл бұрын
So, for your winterizing, you didn’t use antifreeze?
@stevenash39492 жыл бұрын
The first time I winterized it I used antifreeze. This year I just used an air compressor and blew out the lines. I prefer the later because it doesn’t use chemicals.
@olmecone95682 жыл бұрын
Great Video, thank you sir...
@stevenash39492 ай бұрын
Thank you very much! Hope it helped!
@liz60342 жыл бұрын
I'm about to do this in my 1995 Pleasure Way. My two biggest takeaways were about the ATS being a separate component and the old breakers not fitting well. About the wire nuts... I've been told not to use them in RV applications, mainly due to vibration.
@stevenash39492 жыл бұрын
Happy you found it helpful! Yeah, I as the first video I’ve ever made because I couldn’t find any videos on KZread about the process. I used a wire nut tool and years later I have had no issues with any of the connections.
@benitadominguez20772 жыл бұрын
Very informative video on the maintenance and upkeeps on the Roadtrek vans✌️ Looking forward to more videos 👌 Thank you
@stevenash3949 Жыл бұрын
Thank you very much!
@sailorcto2 жыл бұрын
Great, no nonsense instructional video that can be used for any RV. Thank you.
@stevenash39492 жыл бұрын
Thank you! Happy you found it helpful!
@sergiosoriano9182 жыл бұрын
Hello RVers, do you all know where I can find a DIY video to learn how to (step by step) winterize my 1995 Roadtrek 190 Popular?
@sergiosoriano9182 жыл бұрын
Great information. You are the best for newbies.
@stevenash39492 жыл бұрын
Thank for the great feedback! Happy the video helped
@twofacepalmer12122 жыл бұрын
Excellent. Purchased a 95 Dodge Versatile a little while ago, in pretty good shape, did have to upgrade several things but all in all it looks pretty good for the year it is. I'll be bookmarking this. Need to watch it a few times and then I'll give it a shot. I think replacing all the fittings for the water heater might be a good idea too. Thnx Steve....
@stevenash39492 жыл бұрын
Thanks for the great feedback! Best of luck with your new rig. I’m sure there are all sorts of awesome adventures coming for you!
@BKTV1002 жыл бұрын
Get a better microphone
@dcyrene3 жыл бұрын
That’s a lot of water! How often should this be done?
@stevenash39492 жыл бұрын
I’ve heard every season. But I don’t drink the water out of my rig. So the last time I did it was when I made this video.
@spawzuart21803 жыл бұрын
Thank you for the video, super helpful! Adding the water heater on/off was a great idea. Question: Do you have any suggestions or references for the water heater drain plug replacement(online reference maybe)? I’m having a tough time finding an anod rod with threads that fits my 1995 Roadtrek water heater. The screw size seems to be just slightly to large. (same water heater as yours) .
@stevenash39492 жыл бұрын
Thanks for the great feedback! Ozek RV Water Heater Magnesium Anode Rod with PTFE Tape - Compatible with Suburban and Mor-Flo Water Heaters-9.25" Length ¾" NPT Threads (2 Pack) www.amazon.com/dp/B07MC5818R/ref=cm_sw_r_cp_apip_AmuUfrQBShcwq Those are the ones I use.
@timlovejoy76163 жыл бұрын
Great video. My question is, you mentioned the wire which went from the Megnetek converter DC to the battery for battery charging purposes. Where does this wire conect on new Boondocker converter? Or is it used. Thanks
@stevenash39492 жыл бұрын
Thanks! Hope it helped. Yeah, it’s the positive red wire I referred to at 18:47.
@nestorecano3 жыл бұрын
Bless your heart!
@stevenash39493 жыл бұрын
Hope it helped!
@spiritualangel8243 жыл бұрын
Any idea where to buy parts for these
@stevenash39493 жыл бұрын
I bought that one from Bestconverter.com they may be able to get parts or point you in the right direction. I haven’t had to deal with replacement parts in the the time I have owned the converter.
@sm-oe6fb4 жыл бұрын
Great video, thank you! I hope you make some more of these. I do have a suggestion though. Don't set the bleach jug and measuring cup on the carpet as you will risk getting bleached spots if there are any drips.
@stevenash39494 жыл бұрын
Thanks for the feedback! Yeah, good call. I kind of thought that as I was in process.
@lynnmittelstadt25854 жыл бұрын
Thank you! We own a 94D190I. This is a great visual for the task of sanitizing.
@stevenash39494 жыл бұрын
Lynn Mittelstadt Happy to hear it helped!
@mikemoore29794 жыл бұрын
Thanks so much!
@tomtamshen72774 жыл бұрын
Excellent video and much appreciated!
@stevenash39494 жыл бұрын
Tom Tamshen Thank you very much! Happy to hear was helpful.
@tomtamshen72774 жыл бұрын
@@stevenash3949 Have you done a video on the water system with all the valves for city water vs tank? Also, how to get hot water heater going and furnace?
@stevenash39494 жыл бұрын
Tom Tamshen I have not. But I could put something together. With my 190 Versatile there are not many valves, for city water or tank. I still have to de-winterize my hot water heater, so I’ll put a video together out of that and send it along.
@stevenash39494 жыл бұрын
kzread.info/dash/bejne/X6Ca0aWvZdSdg7A.html I believe this one should cover what you’re looking for.
Пікірлер
Now do something about all that clutter throughout your house. That is not healthy sorry truth be told
Thank you for the easy instructions, especially at the end. I also didn’t have the ribbon seated correctly initially. You saved me from panicking about that. I saved a few hundred bucks!
Tell me you’re in the military without telling me you’re in the military…😂 you made it so easy a supply guy could do it.
😂 thanks! Hope it helped.
Whre did you buy the parts?
Just thought you might want to know, the manual for our RoadTrek Popular 200 Chevrolet states when sanitizing the potable water system to add 1/4 cup of bleach to 1 gallon of water, then to add a (1) gallon of the water/bleach mixture to every 15 gallons capacity of your water tank. Our tank is 35 gallons, therefore we only need to add 9-1/3-oz of bleach to our tank to sanitize it, not 1/4 cup per gallon of capacity. Your system will most certainly be sanitized though!
Have the same problem. Samsung appliances are junk
This helped me replace the magnetek 7300 in my r vision trail lite camper. Thank you!
Absolutely! Happy it helped. Thanks for the comment!
Did ours today as the parts company had a 10% off sale at Christmas and decided to not delay any longer. I screwed up on the reinstallation of the ribbon wire on the extreme left side as I didn’t have the ribbon in squarely and fully and I got screwy outputs on the display. Corrected that after unplugging the power cord and redoing ribbon strip and small white plastic holder. Still pissed at Samsung for manufacturing such a defective display and even more 8:07 so for such an exorbitant price for such a simple part. Samsung, never again an appliance customer of yours.
This project was something I was helping my parents with and now my oven is doing the same thing. Definitely unimpressed with the quality of these Samsung components as well.
Samsung suck I don't buy there product no more,
Thanks!
Wonderful Step by Step Instructions. Thank you so much.
Thank you! Hope it helped.
That circuit board says WARNING: HIGH VOLT which means at least somewhere on it there is mains voltage (120v in USA). I'm just amazed you didnt short out the board at the very least.
Ya I work on live switches and outlets all the time but I'd never work on a control board live for fear of tha
LED panels are stepped down to 5v. Was not working with the high voltage heating elements. As you can see, I did not short anything out. If this is not a method you feel comfortable with, feel free to make a video and post it up. I searched for an instructional video on this fix and was not successful.
Hi - by mistake i removed 'edge connection' power supply from the PCB. My control panel is now power less. PCB Part # DE96-01027A Can we "again" solder the edge connections ..?
Thanks! Exactly what I needed
Happy to hear it helped! Hope you are able to get it fixed easily enough.
Happy to hear it helped! Hope you are able to get it fixed easily enough.
I just ordered a Boondocker 1245 PC for my 2001 Chinook Concourse. This video will be very helpful. Thanks!
Hope the install went smoothly and you are enjoying your new converter.
Thank you, yours is the 1st to help with our range. Our Samsumg Range was purchased during kitchen remodel in 2009. Has worked for us after all these years, except recently the left side elements running on high occasionally. The side that was used the most. Now our LED display numbers don't look like numbers. This particular replacement part is $100 +. Other than that, we've been satisfied with this range.
Happy it helped! As I said to a previous viewer, I left power on the range because these displays are stepped down to about 5 volts. I would recommend unplugging the range if you are replacing anything with the heating elements. Best of luck to you!
I just replaced mine and as I was putting everything back together I noticed a black wire with a metal ring on it that was hanging loose. I don’t remember it being under any of the screws that I took out but I don’t know what to do with it. It’s two black wires coming out of the right side that come together to one of those metal rings that look like they’re supposed to be held in place with a screw. Any ideas?
That sounds like a ground wire. Put it make sure its held down by a screw. Its very important
Yeah, I would agree with the ground wire possibly. You could look back at the point when I had the back cover removed and see if you can find where that black wire may connect.
I have a 2003 Chevy 190 Popular...does anyone know where the fresh water tank drain valve is located or if there even is one??? thank you....
Thank you for this video!!! Have a 1996 Versatile purchased before Covid. Has given me a run for my money but am going to persist in repairing. The new Roadtreks have nothing on the older units especially for ventilation.
Absolutely! Hope it helped! Yeah, this beast has been in our family for three generations now. Have a lot of sentimental reasons for keeping her healthy.
I would unplug it or shut off the power at the circuit breaker before doing this work. These are high voltage appliances.
Thanks for watching! Disconnecting power is definitely the safe option. I tend to keep power going for troubleshooting and instant gratification purposes. And yes these are high voltage in general and if troubleshooting a different component on the appliance I would definitely consider disconnecting power. But the displays on these are typically stepped down to around 5 volts.
I cringed when I saw your son working on that project with power still on.@@stevenash3949
Ours is flickering as well but I can live with that although I am wondering whether the flickering is a precursor to a complete failure meaning the stove would not be usable. Has anyone waited until it fails? Secondly, what kind of assurances does anyone have that the replacement display doesn’t start flickering a year or two after installation as they are likely all from the same manufacturer.
Can’t tell you about the results after a year or two. But I can tell you in 7 months my parents haven’t had any further issues with the display or range. Up to personal preference on the choice to await total failure. I spent 10 days at my parents house last summer and thought I was going to have seizure after day two of looking at that display and my mom had mentioned it to me a few times previously. So I figured I’d be a good son and remind my parents why I’m their favorite 😉
Don't use the self cleaning feature on the range. I'm pretty sure that's what caused mine to flicker. It just gets too hot and starts to fry more delicate components.
@@lisao3041I have never used the self cleaning before and I also have the flickering problem ☠️
Bonjour..c'est koi le numéro de la pièce svp..merci
Bonjour et merci d'avoir regardé ! Le numéro de pièce pour l'affichage LED sur cette gamme spécifique est DE07-00129A. J'ai mis le lien Amazon dans la description.
@@stevenash3949 merci!🙂
How much is the part from Amazon? Can someone please provide a link to it?
Thought I added it to the description. Rookie move on my part. Samsung DE07-00129A LED Display... www.amazon.com/dp/B01BN0AX7A?ref=ppx_pop_mob_ap_share
Thanks same problem here, going to replace when part arrives! Hopefully I remember the ribbon lol
Hope it helps! Yeah, I wasn’t going to add that fumble, but I figured it would help people save a couple minutes.
Hi Steve: Appreciate you sharing your video and spending the time to do so. I don't encourage having kids coming anywhere near electrical devices because one miss and he could be electrocuted. Hope you understand my concern.
Thanks! Hope the video was helpful
thanks ,was helpful
Thanks! Happy to hear!
𝘱𝘳𝘰𝘮𝘰𝘴𝘮
Thank you for the amazing video!! Question from this newbie and hope it doesn’t sound silly: if the water heater tank is full and the fresh water tanks are being drained using the water pump, does this method drain the water heater as well?
Thanks for the feedback! No worries. That’s a question I’ve had and have heard asked many times. No, the water pump will not drain out the hot water heater. You have to pull the anode to drain the tank.
Thank you very much
Very helpful! Thank you & safe+happy travels!
So, for your winterizing, you didn’t use antifreeze?
The first time I winterized it I used antifreeze. This year I just used an air compressor and blew out the lines. I prefer the later because it doesn’t use chemicals.
Great Video, thank you sir...
Thank you very much! Hope it helped!
I'm about to do this in my 1995 Pleasure Way. My two biggest takeaways were about the ATS being a separate component and the old breakers not fitting well. About the wire nuts... I've been told not to use them in RV applications, mainly due to vibration.
Happy you found it helpful! Yeah, I as the first video I’ve ever made because I couldn’t find any videos on KZread about the process. I used a wire nut tool and years later I have had no issues with any of the connections.
Very informative video on the maintenance and upkeeps on the Roadtrek vans✌️ Looking forward to more videos 👌 Thank you
Thank you very much!
Great, no nonsense instructional video that can be used for any RV. Thank you.
Thank you! Happy you found it helpful!
Hello RVers, do you all know where I can find a DIY video to learn how to (step by step) winterize my 1995 Roadtrek 190 Popular?
Great information. You are the best for newbies.
Thank for the great feedback! Happy the video helped
Excellent. Purchased a 95 Dodge Versatile a little while ago, in pretty good shape, did have to upgrade several things but all in all it looks pretty good for the year it is. I'll be bookmarking this. Need to watch it a few times and then I'll give it a shot. I think replacing all the fittings for the water heater might be a good idea too. Thnx Steve....
Thanks for the great feedback! Best of luck with your new rig. I’m sure there are all sorts of awesome adventures coming for you!
Get a better microphone
That’s a lot of water! How often should this be done?
I’ve heard every season. But I don’t drink the water out of my rig. So the last time I did it was when I made this video.
Thank you for the video, super helpful! Adding the water heater on/off was a great idea. Question: Do you have any suggestions or references for the water heater drain plug replacement(online reference maybe)? I’m having a tough time finding an anod rod with threads that fits my 1995 Roadtrek water heater. The screw size seems to be just slightly to large. (same water heater as yours) .
Thanks for the great feedback! Ozek RV Water Heater Magnesium Anode Rod with PTFE Tape - Compatible with Suburban and Mor-Flo Water Heaters-9.25" Length ¾" NPT Threads (2 Pack) www.amazon.com/dp/B07MC5818R/ref=cm_sw_r_cp_apip_AmuUfrQBShcwq Those are the ones I use.
Great video. My question is, you mentioned the wire which went from the Megnetek converter DC to the battery for battery charging purposes. Where does this wire conect on new Boondocker converter? Or is it used. Thanks
Thanks! Hope it helped. Yeah, it’s the positive red wire I referred to at 18:47.
Bless your heart!
Hope it helped!
Any idea where to buy parts for these
I bought that one from Bestconverter.com they may be able to get parts or point you in the right direction. I haven’t had to deal with replacement parts in the the time I have owned the converter.
Great video, thank you! I hope you make some more of these. I do have a suggestion though. Don't set the bleach jug and measuring cup on the carpet as you will risk getting bleached spots if there are any drips.
Thanks for the feedback! Yeah, good call. I kind of thought that as I was in process.
Thank you! We own a 94D190I. This is a great visual for the task of sanitizing.
Lynn Mittelstadt Happy to hear it helped!
Thanks so much!
Excellent video and much appreciated!
Tom Tamshen Thank you very much! Happy to hear was helpful.
@@stevenash3949 Have you done a video on the water system with all the valves for city water vs tank? Also, how to get hot water heater going and furnace?
Tom Tamshen I have not. But I could put something together. With my 190 Versatile there are not many valves, for city water or tank. I still have to de-winterize my hot water heater, so I’ll put a video together out of that and send it along.
kzread.info/dash/bejne/X6Ca0aWvZdSdg7A.html I believe this one should cover what you’re looking for.