Пікірлер

• 
  @Siggy4213 ай бұрын

  I ove the idea of coffee table sized game Unless i'm misunderstanding... why does shrinking the scal reduce the play time?

• 
  @rokminis592 ай бұрын

  I find we play more fast and loose. Spend less time agonising over the accurate movement to the mm and just move minis and roll dice with a lot more flexibility about how it fits the rules. Possibly play style as well as the scale change

• 
  @chaimnisan28413 ай бұрын

  Wow! Glad I found this video. Looks really awesome. If you ship outside the UK, I’ll order.

• 
  @rokminis593 ай бұрын

  Hey sorry crazy week. Yes I ship globally via a fully insured and trackable courier. I’ve sent them as far as Australia recently!

• 
  @JimmyCrawford4 ай бұрын

  Great tutorial. Not sure you can actually recycle MDF as it's full of (epoxy?) binders.

• 
  @rokminis593 ай бұрын

  I’ve seen it go in the containers at my recycling centre without issue but this may be something that varies regionally. Not Sure to be honest

• 
  @JimmyCrawford3 ай бұрын

  @@rokminis59 Might get pulled out at the other end and sent off to one of those waste to energy furnace operations?

• 
  @michaelstockin16364 ай бұрын

  Love me some 10mm fantasy.

• 
  @rokminis594 ай бұрын

  It’s great! I need to do an updated version of this really!

• 
  @seitanfang20335 ай бұрын

  Nice video and great demo of the FSD game mechanics! What scale are your miniatures in? 6 mm (from free samples/MyMiniFactory) seem to be smaller than your models? Thanks!

• 
  @rokminis594 ай бұрын

  Hi. I printed everything in its native 6mm scale as designed. No scale up used. Thanks!

• 
  @Galzag6 ай бұрын

  Is it possible to buy STLs?

• 
  @rokminis596 ай бұрын

  Yes. Available from Forest Dragon, Greenskin Miniatures and Ankylo on Gumroad

• 
  @montycobra73406 ай бұрын

  This is awesome!

• 
  @rokminis596 ай бұрын

  Thanks! I definitely keeps the hobby rolling with less space to worry about!

• 
  @nealbarton74346 ай бұрын

  Great video, terrain and armies look amazing! Tried looking at your Facebook and messaging through website with no luck. What do you use for your bases?

• 
  @rokminis596 ай бұрын

  Sorry, I haven’t seen a notification at all. I cut them myself from 2mm MDF sheets. It’s a good balance of thickness and cost

• 
  @nealbarton74346 ай бұрын

  I was unable to send a message via website and link to facey didn’t work. Just feedback, not being critical 😊

• 
  @rokminis596 ай бұрын

  @nealbarton7434 not an ounce of offence taken. Technically regularly lets me down! 😂

• 
  @mardukwings-bp1pp7 ай бұрын

  Still need to try some

• 
  @rokminis597 ай бұрын

  It’s right up your alley!

• 
  @simonparfitt18207 ай бұрын

  Great video. The minis look quality too. What did you use on the bases to make them look the way they do?

• 
  @rokminis597 ай бұрын

  Thanks! That was Vallejo texture paste. Sprinkle on a few bits of grit. Pop the minis feet in glue then in the paste let it all dry into one piece

• 
  @stormy77228 ай бұрын

  Cant find this stuff anywhere in Canada

• 
  @rokminis598 ай бұрын

  Really? I get mine from TTCombat and I’m sure that they ship globally and they used to have a good free postage package if you ordered a few kits

• 
  @archer11168 ай бұрын

  Nice video man! Great job. Where is the kit from? Would love to build my own with your advice from the video.

• 
  @rokminis598 ай бұрын

  Hi, it’s on my website. I absolutely should have dropped the product link in the description! I’ll do that now

• 
  @wc91098 ай бұрын

  I find that submerging the minis in hot water is a better way for me to remove the supports. This is what I have done with the 10mm S.W. Figures I bought off you at SELWG. I do love those minis by the way!

• 
  @rokminis598 ай бұрын

  Great tip! I think that’s got to be a better way to go with the supports that are a frame around the minis Vs the ones that do direct to the minis base. I should do Another vid on the sci fi stuff and include this. Cheers and glad you’re happy with them

• 
  @ronin13128 ай бұрын

  kzread.info/dash/bejne/eIGOpJdslMm4YrA.html

• 
  @ronin13128 ай бұрын

  kzread.info/dash/bejne/kauq0MdvZ7a8hto.html

• 
  @ronin13128 ай бұрын

  Jon Schaffer is owner.. copy rights.. Full Spectrum Dominance

• 
  @rokminis598 ай бұрын

  Hi, sorry I’m a little confused here as the game to my knowlege is owned by The Lazy Forger. Am I missing a connection here? Happy to learn more if you can point out what you mean

• 
  @smellslikemachinespirit42559 ай бұрын

  Very cool. I dig it!

• 
  @rokminis599 ай бұрын

  Thanks! It’s such a great game

• 
  @MrPorkmann10 ай бұрын

  You sir, deserve more views.

• 
  @rokminis5910 ай бұрын

  Thanks, that’s real kind! I don’t make enough vids these days to even vaguely appease the algorithm 😂

• 
  @ArnolddeGans Жыл бұрын

  Just came across this video .. where did those floor parts come from .. home made ?

• 
  @rokminis59 Жыл бұрын

  Hi, I made them myself in an earlier video on the build but am considering doing the frime to sell as I get asked about them

• 
  @ArnolddeGans Жыл бұрын

  @@rokminis59 Well ... GW caught up with you on the terrain tiles it seems 😅

• 
  @billcedarheath387 Жыл бұрын

  Just discovering this game and finding it doesn't get the love it deserves. Lazy Forger mentioned more factions to come for this game and they've yet to appear. Perhaps you as a merchant might now more on that. I hope there are more factions to be released soon and that Lazy Forger isn't trying to live up to their namesake.

• 
  @rokminis59 Жыл бұрын

  Ha ha ha. It’s a great name choice as I know their designs well now and they’re not lazy! I know that the PMC/Corporation army is out this year but I spot have any other inside info sadly but I trust them to nail it when it’s out! There is background for the scavengers and that’s what excites me!

• 
  @billcedarheath387 Жыл бұрын

  @@rokminis59 That's great news. The beautifully designed models drew me in quickly. I became a bit apprehensive about getting into the game with only seeing two factions and not seeing much info about more armies on the way. Your response has me on the game rules bandwagon. Thanks so much.

• 
  @rokminis59 Жыл бұрын

  It is a great game. I made this to show off the mechanics but Bill and I genuinely loved playing it

• 
  @billcedarheath387 Жыл бұрын

  @@rokminis59 based on my enjoyment of watching this video, I wouldn't mind seeing more of your games with Full Spectrum Dominance. I'm sure it would also help the game get noticed more as well as maybe help you with selling your prints too.

• 
  @rokminis59 Жыл бұрын

  Yeah I really should do more like that! I’ll convince some friends! In the mean time I do other games with friends on Dice and Easy Games here on YT

• 
  @mardukwings-bp1pp Жыл бұрын

  Looks great ❤

• 
  @rokminis59 Жыл бұрын

  Thanks! I know you like a bit of grime

• 
  @gabrielnguyen5580 Жыл бұрын

  Im gonna have to figure out how to paint these wood elves but soon

• 
  @rokminis59 Жыл бұрын

  I did wood elves early on and if your going with the spring/summer greens then contrast would be the way for me. For autum/winter I think a colour primer of brown/blue would save a lot of time

• 
  @HappyHungrySleepy23 Жыл бұрын

  More!

• 
  @rokminis59 Жыл бұрын

  Would love to be playing and doing more! Hoping they add new models soon and the range keeps growing

• 
  @knuddeltrauma8 ай бұрын

  @@rokminis59 Hopewith wave 2 now :) ! Thanks for this cool report

• 
  @rokminis598 ай бұрын

  It’s looking amazing! Just test printed the armies and they’re incredible

• 
  @3Skulls Жыл бұрын

  In the first part of this tutorial, it ended with all the extra detail finished, and this video starts with the terrain already primed. I might have missed it, but did you use something to seal the MDF before priming or did you go straight on with the primer? I've just ordered a ton of TTCombat terrain for a Necromunda table but have never painted MDF before and there is a raging debate in the hobby on how best to / whether you should seal the MDF first. Would love to know what you did on this kit!

• 
  @rokminis59 Жыл бұрын

  Hi! Did you watch part 1 about the build and texture stage? The primed minis I show at 1:00 are with the colours shown at the front, the dark tones that I talked about for contrast. These are just graffiti art paints. They’re not water based so the MDF doesn’t swell up and come In many colours. Alternatively the new TTC (made since the video came out) are amazing for MDF by design. If you use a traditional primer then yea, a seal of PVA does help but a TTC or graffiti paint you can just go straight onto the MDF. My additional building steps and painting steps will definitely bring out the best in the terrain. Especially all dirty for Necromunda

• 
  @3Skulls Жыл бұрын

  @@rokminis59 Thanks for the quick reply! I did watch part 1 but must have missed where you talked about this. Which new TTC product are you refering to? Their primer spray cans? If so, they're only available in the UK and I'm in the EU.

• 
  @rokminis59 Жыл бұрын

  Ah right in that case Montana/Kobra/Molatov spray paints are the ones. That brown start point is just a single coat, no sealing needed

• 
  @3Skulls Жыл бұрын

  @@rokminis59 Montana is made in Germany which is where I live and I can get cans for quite cheap, so that's great news! Do you know if it can also be used on plastic / resin minis as a primer? Because that would save me sooooo much money!

• 
  @rokminis59 Жыл бұрын

  Checkout videos by Marco Frisoni (Not Just Mecha) as he goes really in depth as a professional artist on what cans and caps to use

• 
  @marcopolo9549 Жыл бұрын

  Had a great conversation with the staff at Salute 23. The team play this game at pubs 😂. The minis are amazing!

• 
  @rokminis59 Жыл бұрын

  Oh that’s awesome to hear! We are always adding new armies and terrain so keep up on our socials and share any games you play!

• 
  @myprivatechannel1695 Жыл бұрын

  Do they come already painted?

• 
  @rokminis59 Жыл бұрын

  Hi, no they’re all printed models that need painting but I have a video here that shows the best ways to go about it

• 
  @myprivatechannel1695 Жыл бұрын

  @@rokminis59 Ok. Did you sculpt them yourself?

• 
  @rokminis59 Жыл бұрын

  Hi, they’re licensed from digital sculptors

• 
  @SwordlordRoy Жыл бұрын

  Currently ordering one as I write, with plans to do more as paychecks allow. Any plans to add Dwarfs/Dwarves to the roster at some point?

• 
  @rokminis59 Жыл бұрын

  Awesome, thanks! Yea, dwarves are half sculpted and due in July

• 
  @withgoodtaste Жыл бұрын

  Nice nice.

• 
  @rokminis59 Жыл бұрын

  Thanks!

• 
  @venessalopez4563 Жыл бұрын

  how do I buy this ?

• 
  @rokminis59 Жыл бұрын

  Hi Vanessa, I have box sets and army options on my website: www.rokminis.com/shop?Category=Warmaster Thanks!

• 
  @nickroberts1296 Жыл бұрын

  Just ordered. Great idea!

• 
  @rokminis59 Жыл бұрын

  Thanks Nick!

• 
  @whitesharkgamingstudios6436 Жыл бұрын

  Ooooh that’s a fancy kit! Love it :)

• 
  @rokminis59 Жыл бұрын

  You done good chap!

• 
  @brushwarrior9326 Жыл бұрын

  How big is the warmaster playmat?

• 
  @rokminis59 Жыл бұрын

  Hi! I don’t sell the Warmaster mat any more as it’s 6x4 feet. I do have the Kings of War mats at 22x30 inch. If you need a mat I recommend Tiny Wargames as a mat maker

• 
  @brushwarrior9326 Жыл бұрын

  @@rokminis59 thanks for a prompt reply!! Great content!! Also wandering i have warmaster trays, where did u get the movement trays and square to round base tray in the vids? I wanna start kow 10mm thanks to ur video

• 
  @rokminis59 Жыл бұрын

  I make them myself. These days I laser cut them for speed

• 
  @Justnothankyou132 Жыл бұрын

  Well made video, thank you for the information

• 
  @rokminis59 Жыл бұрын

  Thanks, glad it was useful!

• 
  @tabletopsidekick Жыл бұрын

  The plaster of paris drying by chemical reaction is a great bit of info! I've had issues with warping. How has the plaster managed after a year since this video was made? Still solid and stable? :)

• 
  @rokminis59 Жыл бұрын

  Yeah it stays set for life unless you try and destroy it. It’s all held up well and terrain i made many years ago this way is still going!

• 
  @klauszoidberg999 Жыл бұрын

  super fine. Especially the skeleton unit was quite impressive after just a short time. I cannot wait until you paint maybe some rok-stuff for epic scifi. Recently I have bought the new valejo range for their constrast paints. I am curious how they work. I have tried their contrast black on a 28mm minotaur and its looks very well so far.

• 
  @rokminis59 Жыл бұрын

  Yes I must do some of the 6mm stuff to show the scale difference! I really want to get the Vallejo ones to try out!

• 
  @klauszoidberg999 Жыл бұрын

  @@rokminis59 I am not sure if I am competent enough to give an opinion about the series. I bought the complete range, but tried only 5 or 6 of them. I always thought that of the 3 lines from Army Painter, GW and now Valejo there are good colors and not so good ones. For example I like the red and the brown from army painter speed paint and I like the white from contrast. The goblin green contrast from Valejo I like best from all 5 colors I tried yet, but the dark green I find not very good. But contrary to you I am only a medium skilled painter, so my opinion is not worth much I guess.

• 
  @rokminis59 Жыл бұрын

  Everyone’s opinion is worthy! As a developing painter, you are probably the target group for GW/AP over Vallejo, so your opinion there is very valuable! I’ll def grab some to test them out

• 
  @AngusMcIntyre Жыл бұрын

  Don't be afraid to tear that sponge dude!

• 
  @rokminis59 Жыл бұрын

  I’ll just hulk out and shred it to bits 😂

• 
  @stonehorsegaming Жыл бұрын

  Good video. It seems like a nice little system. I might have to pick it up. It looks like it does quite a bit without needing loads of dice. Expanding beyond the usual D6 does allow for a lot more nuance and interesting mechanics. Poor Bill, he seems to have my luck with dice. If we ever played a game, I imagine nowt would die.

• 
  @rokminis59 Жыл бұрын

  He’s not blessed with great rolls. Don’t doubt that it balances out in a game we recorded for his Chanel last month though! Warzone Morloc. Yeah we loved the game and the minis definitely are a real winner. Very proud to have them listed as the designs are excellent

• 
  @Asumis1988 Жыл бұрын

  Nice Video but I have a question. Did you activate your artillery twice in one turn? it seemed like it shot at the mech when it came in and also later at the infantery

• 
  @rokminis59 Жыл бұрын

  Not that I’m aware of as we tilted the cards but possibly a slip while playing and filming. No recollection that far back in time!

• 
  @Asumis1988 Жыл бұрын

  @@rokminis59 Did you play this in 15mm or in 6mm?

• 
  @rokminis59 Жыл бұрын

  This was 6mm but they could be scaled as you like and the distance unit system means it’s flexible

• 
  @cecilharper8723 Жыл бұрын

  🙈 Promo>SM!!

• 
  @rokminis59 Жыл бұрын

  Sorry, don’t get what you mean there

• 
  @jasonbagley6948 Жыл бұрын

  Really enjoyed your video. Those bases look great on the Tech BTW. What size bases are you using?

• 
  @rokminis59 Жыл бұрын

  Hi Jason, These are just files that I printed and include in the box set. I think I just made infantry 20x30 and rounded the edges. Made them in Blender. Then topped with Vallejo paste and some gavel

• 
  @littlevaquero5516 Жыл бұрын

  look up Maximilian Riede pleaseeeee

• 
  @rokminis59 Жыл бұрын

  Sorry, was unable to make the connections here

• 
  @zakwolschon8837 Жыл бұрын

  I saw you use the resione brand resin, would you mind sharing which resin exactly?

• 
  @rokminis59 Жыл бұрын

  M58. It’s expensive but worth it for the quality

• 
  @zakwolschon8837 Жыл бұрын

  @@rokminis59 Thanks a lot, man!

• 
  @rokminis59 Жыл бұрын

  No worries. If you want details on settings etc hit me up on social media

• 
  @1hamsterman Жыл бұрын

  Great video, the edit was good and it was easy to follow the game!

• 
  @rokminis59 Жыл бұрын

  Thanks! I really love it and definitely one of the favourite things I have on my store

• 
  @natestawarski417 Жыл бұрын

  Tyranids coming? Hoping to get the starter with Necrons and Tyranids some day. Lol

• 
  @rokminis59 Жыл бұрын

  Space bugs for the sci fi version are just test printed. I need to take some photos

• 
  @natestawarski417 Жыл бұрын

  @@rokminis59 Oh wow. That was fast. Lol time for some space bugs and undead robots. Lol.

• 
  @rokminis59 Жыл бұрын

  Great combo! Follow me on social media and I’ll be putting up the info next week

• 
  @natestawarski417 Жыл бұрын

  @@rokminis59 Sweet! Will do. Do the sci-fi sets come with the little case like in this video too?

• 
  @rokminis59 Жыл бұрын

  No they’re packed in cardboard boxes as the minis are in longer strips and blocks due to the support structure. Once based you could get them a components box like this but I would recommend a 0.5mm thick magnet on the base and a magnetic box

• 
  @Vorpal_Wit Жыл бұрын

  Really enjoyed this demo. Thanks!

• 
  @rokminis59 Жыл бұрын

  Thanks Billy, hopefully it showed off just how great the game is to play!

• 
  @thelazyforger Жыл бұрын

  Very well laid down! Thank for the video, man!

• 
  @rokminis59 Жыл бұрын

  Thanks! Hope we didn’t have any major slip ups

• 
  @Vorpal_Wit Жыл бұрын

  Love your models, and the game looks promising as well. Can you tell us if there will be any kind of unit/army generator, or will it just be prepared forces added over time? Thanks.

• 
  @thelazyforger Жыл бұрын

  @@Vorpal_Wit Ideally the cards that each unit has (and the universal ones available to all) should be enough to quickly build up any list you want to play with. More factions will be added soon-ish, which should increase the combinations and strategies too!

• 
  @Vorpal_Wit Жыл бұрын

  @@thelazyforger Thanks for the reply!

• 
  @rokminis59 Жыл бұрын

  The simplicity of points on their cards and almost everything being single digit point costs makes any building and changes between games really quick and fluid

• 
  @stingray4567 Жыл бұрын

  awesome

• 
  @rokminis59 Жыл бұрын

  Thanks! I’ve added a lot more army options since.

• 
  @PunkMaquiavel Жыл бұрын

  This was exactly the video I was searching for! What way would you go for those despoilers you've printed? contrast paint or drybrush? Also you mentioned that you've used a flexible resin, I would like to know wich one is. Thanks for the video, I didn't knew about this contrast paint tecnique.

• 
  @rokminis59 Жыл бұрын

  I use Resione brand resin. I dry brushed mine in the same way as the undead then did the cloaks and any flesh afterwards

• 
  @PunkMaquiavel Жыл бұрын

  @@rokminis59 I dry brushed mine with red. They came out cool but I was thinking about trying some contrast paint like you showed in the video.

• 
  @rokminis59 Жыл бұрын

  They work great. Most of the brands that make this type paints are pretty good for it

• 
  @TheLuggi84 Жыл бұрын

  4:26 That's wrong. They are supports, mini supports to be exact. Those don't have a narrow connection point. I mean, you can leave them there for sure, but they are indeed supports. Look at the pictures of the designer. Woudln't make much sense to have small little steel beams holding up the container, when it already supports itself by sitting on the roof, don't you think? ;)

• 
  @rokminis59 Жыл бұрын

  Thanks. Yeah it wasn’t super clear so I left them but they fit just fine as steel support pipes to hold up the rickety containers

• 
  @thelazyforger Жыл бұрын

  Very nice! Blunt but effective!

• 
  @rokminis59 Жыл бұрын

  Thankfully someone sculpted a load of details on them and made it a breeze!