Our main Channel is @bmsweb, however over the years that's become more specific to FPV, Drone Racing etc We wanted to get general RC Aircraft Videos back on our channel, everything from info/review style videos through to just flying and having fun, sharing what others are flying etc
Hope you enjoy some of content and decide to subscribe. Thank you for reading this.
Best Regards
Paul & Thomas
Пікірлер
2:22 tense bum moment! Comes in nice and slow. Slower than i thought she'd handle 👍🏾
Graeme, that is the coolest plane ever!
I once converted a Haba throwing glider into an RC. Everyone should build a model like this, fantastic! Nice video, thank you.👏👏👏
プロペラがとてもキュートで良いですね。またのんびり飛ばせる機体は素晴らしいです。
ありがとうございます。本当に素晴らしい機体ですね
Such a delight to see old-school construction! At the end of my Dad's flying days he was getting quite depressed that most of his clubmates were going ARTF.
Thank you! We're very lucky in our club in that we have the whole spectrum of pilots and builders. In fact Graeme, the person who built this aircraft, flies everything from big gassers through to Foam FPV Aircraft that use iNav. We genuinely have an amazing club.
Just beautiful! I have wanted to do this for too long.
What did you use for covering? Pat
It is a clear, iron on, film. I was given a roll so I don't know what it is called or where to get it I am afraid. It is very very thin and weighs almost nothing. It doesn't have very much shrink, so it is hard to get those last little wrinkles out. I do like the look of it.
That was a great landing!!
Stick a folder on there
What does "75 mil" meen ???? Diameter, I guess, what what dimensions ? Do you know the force it produces ? What receiver did you use ? There are so many georgious rubber powered models I would like to see this way ! Thank you for showing ! 🙂
75 millimeter (mm).
Im pretty sure he used a Spektrum RX in it
@@my_dear_friend_ thank you for the info !
The tiny prop caught my eye, but whatever performance calculations you made were correct. And the covering: as a boy I built a Guillow's Stearman that never flew because the framework was too beautiful to cover up; your choice of clear was as clever as your choice of propeller.
That is special
Just wow 😳
Great fun. I'm in the UK [north of England] and have become addicted to this kind of 'interrupted free-flight' model. They're easy to design, and a good way to get around the (outrageous) new drone laws, with their unrealistic weight limits and threats of arrest, fines, jail sentences, torture and execution for failure to comply. Although the light weight - well under 250g - restricts the number of days available for flying (the weather's usually atrocious here), there's something very satisfying about building light, building cheap, and then just floating about with the twittering larks for company, looking for lift. I don't often fit motors to my models these days, and prefer the simplicity of catapult-launched gliders. Old free-flight enthusiasts will appreciate the two biggest advantages of this kind of plane: you'll never lose one in a thermal because the dethermaliser failed to trigger; and you don't have to chase them half-a-mile downwind after every flight - you can land them at your feet. Thanks for the video - very enjoyable.🙂
Just do the drone test it isn’t difficult 😃
A Keil Kraft Competitor?
Graeme just gave me all the files and I've added them to the description (PDFs etc)
A really great working machine
Thank you
Very nice 👍
It looks similar to a Simmers Dynamoe. This is not a Dynamoe but in the same league, size and general appearance.
Graeme just gave me all the files and I've added them to the description (PDFs etc)
Absolutely brilliant. I must say I am very impressed with this model and I must have a go. I don't know if you said but what is the model. Nice one.
Im going to get the details from Graeme and get it in the description. We were all totally blown away with how well it flew. He ended up buddy boxing me to his Radio so I could fly it in Mode 1 vs his mode 2 radio and it flew amazing. It honestly felt like flying a model with ailerons
Graeme just gave me all the files and I've added them to the description (PDFs etc)
Great video! I want to do similar- is it a KeilKraft or Veron model?
Im going to get the details from Graeme and get it in the description, honestly not sure what model it was, but I believe its a UK model.
Graeme just gave me all the files and I've added them to the description (PDFs etc)
Do you have the plans?
I've spoken to Graeme the person who built this model. Apparently it was from a Kit which he's made some changes to. He'll get the details to us. He may try to take a pic of the plans, but I'm sure once you have it's details you should be able to track down a scanned set of PDF Plans for it
Graeme just gave me all the files and I've added them to the description (PDFs etc)
@@BMSRC-im6qe thanks so much man!! I’m subbing
@@BMSRC-im6qe Neat conversion, I looked at the plans, and it appears modifications were made to the tail feathers, standard rudder elevator vs dual rudders elevator. I have a pile of balsa, and time on my hands...Thanks for the nice video
Thanks Thomas and Paul for taking the incredible pics and making this video. This really is such a joy to fly. :)
You did just a great job with this model!
That's impressive Graeme, flew really well. Great video Thomas and Paul. Cheers, Mike.
Thanks Mike 👍
@@OhGAAH, hope to catch you, Thomas and Paul at the field at some stage. Cheers, Mike
Where did you place batteries and what did you use for batteries
ฉันอยากซื้อมัน ฉันจะหาซื้อได้ที่ไหนฉันอยู่ประเทศไทย
Better servos may help, but it is a 3D plane with big control surfaces. I found this plane to be challenge to fly smoothly, until I improved my skills a bit...now I enjoy it.😉
Skills need more work as they always will. It's dialled in better today and hopefully the changes I've made to the linkages should still give the right feel. Will do a followup
Nice flight by the way what rx you used?
Using the V8FR from FrSky. One of the old receivers I had
@@BMSRC-im6qe Oh nice. I had those too never with Tx16s. But now I'm using lot of td receivers and lot of radio master er elrs receivers.
Well done Paul. A club member from our club got certified for his gold wings today flying that E-Flite Extra. Looks like an awesome plane. Cheers, Mike 👍
I had another crack at it today and it's flying better. I think the next flight it should be spot on. It's a great model that's for sure
Very nice Paul. 👍
Thanks Graeme 😀
Yeah bro. Was too afraid for vectors. Had only tried them once on 50% before this flight. Scard me. Hadnt flown it in those cross winds ever either. Awesome jet. I've had about 5 flights on 100% vectors since this flight. It stalls quite fast if not ready for it. Scary stuff.
The fact that we got to see it fly made my day. It was such a horrible day. You did a great job buddy
@BMSRC-im6qe thank you Bro. Was a crazy cross winds day. Thank you for your wing flight also. I was happily honoured to fly it.
@@haydengreen1707 You're welcome buddy. I have to pay you guys a visit next time. Once Thomas gets back from Japan we'll have to have a fly with you guys
Your welcome anytime. We have industrial matting as runway. Or our secondary club is grass.
That was an awesome day hanging out at the field with you guys! The moment the wind calmed down, that Mig was going up!!! Well done to Hayden! Cheers, Mick.
I was over the moon when the wind finally settled down. I'm pretty sure many aircraft were damaged while on the ground. So good seeing Hayden fly this
What field is this mate?
GMAC in Victoria
Nice. What is your cam?
Just an iPhone
Great job! Putting mine together today!
I have no doubt you'll have an absolute blast!
One of the best df i fly ❤❤❤
Love the way my mig 29 lands its good buy
One of my favourite aircraft 😍
Wow, awesome jet, great flying. What lipo size do you use? 6s 3300 ? Thx.
If you have a look in the description there should be a link to Vasco's channel. He usually documents what gear is used on his models. It's a great looking and flying model without a doubt. I think people get into trouble with it because they slow down too much at times
@@BMSRC-im6qe thanks. I got it. Yes, flyers build their F35s heavy like pigs, then blame that the F35 flies like pig :-) :-).
@@tructran8783 What's honestly surprising is none of these kits feature the C Variant. Considering the C is the Aircraft Carrier version and as such features more wing area, it should translate to an insanely great flying RC EDF. No idea why no one is making it
Looks like she handles grass fields well. Your thoughts?
Firstly not my aircraft but we've had 2 in the club and both have ended up crashing at one time or another. They seem to land really hot. I personally and not sold on it, my son loves it.
Where can I buy that canopy? It looks so cool!
Nice video! Hello can somebody pls say to me what is the diameter of this tail nozzle from the Eurofighter 90mm EDF and how long is its width?
Beautiful bronco
nice man i have this plane i am scared to fly it
It's an awesome model
Wow. Great flying guys and great filming by Vasco. The video came out really good and it shows just how much fun you guys were having. It was actually even darker than it appears, as the camera compensates so well for the low light. It was a privilege to have seen this in real life. Thanks everyone. 🤩
Thank you for letting us fly your models!!
i want a battle wing this looks so fun !!!!!!!!!!!!!!!!!!!!!!!!!!
who is flying in the background paul
That was Sam and Gabe. The track was Gabe's Nationals Qualifying track if he had won the Nationals. The video that Thomas put out was the fastest laps on that track. It was basically a full throttle track lol
oh i see also hahah i have found the rc channel and i am kinda addicted i love watching all the videos honest ! its sick keep making them@@BMSWEB
Those are some based colors you have there
That turned out not bad after all. That was so fun to watch, it was a great night. 😁
Thanks so much for the awesome filming you did!
Hey guys I had a AL37 custom painted and its a paint job you may have never seen before so if you like check this link of mine and let me know what you think? kzread.info/dash/bejne/jISXmptwfNyThNI.html I love this bird and your flight was excellent👍👍👍👍👍
Hello my new friends at BMS RC im Joe excellent maiden great great job. I have this bird also and will be maiden this spring. Any advice you want to share about it? I gave you guys a like and subscribe to support your channel and look fwd to more. Thanks for sharing and always love feed back.👍👍👍👍👍
It's actually a mates Aircraft but in all honesty he had it setup as per the manual (CG etc) and it flew perfectly. It's a fantastic aircraft and just very well behaved in the air.
That was such a fun day! 😁
Wayyyyyy to high when trying to land