Are you using pure lead or lead like wheel weights that has antimony and other stuff in it?
@wertigerno Жыл бұрын
you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer.
@wertigerno Жыл бұрын
you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
@wertigerno Жыл бұрын
, you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer.
@wertigerno Жыл бұрын
They are sons of bitches, you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer. Sons of bitches.
@wertigerno Жыл бұрын
The videos are very interesting, you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
@wertigerno Жыл бұрын
, you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
@wertigerno Жыл бұрын
You should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
@wertigerno Жыл бұрын
I bought them a magma star with a heat base,air cylinder, and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts
@wertigerno Жыл бұрын
.I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cyliinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts, they are bastards.
@wertigerno Жыл бұрын
I bought them a magma star with a heat base and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts
@wertigerno Жыл бұрын
I bought them a magma star with a heat base air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base , air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base a air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
@wertigerno Жыл бұрын
I bought them a magma star with a heat base, air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts,
@matthewpeck29262 жыл бұрын
How do you replace the wing that cuts off the excess lead? Can you make a video on that? Big ask I know.
@matthewpeck29262 жыл бұрын
Spru plate replacement.
@franknowakowski31032 жыл бұрын
I can run mine out ol lube, yet there is still an inch or so of lube in the bottom. I had turned the plunger (?) as far down as possible. Still no lube in the pressure assembly. Unscrew that plunger as you showed. Add half a stick lube and the black knurled piece is INCHES away from the threads. What am i doing wrong. Great machine when everything is right.
@abdrazaksache4493 жыл бұрын
Please is there a way to make the lead more flexible?
@beachboardfan95443 жыл бұрын
Roll pins suck, cant use detent pins or something?
@user-kw5zr9fs1l4 жыл бұрын
How much is in dollars
@rudivaldobarbosa3234 жыл бұрын
Gostaria de comprar este produto.
@wertigerno Жыл бұрын
pues ten cuidado ,no te hagan como a mí que les compré una máquina y no me contestan los correos para comprar recalibradores ni recambios ,son unos malnacidos
@railsonborgeseaventura.2054 жыл бұрын
Mais um link e inscrito aí no seu canal .Amigo sou só BRASIL como faço pra comprar uma dessa vluu obrigado.
@raquelluanjuan27304 жыл бұрын
Alguém mim vende esse gotejado
@Goiasdiversidades4 жыл бұрын
Do You send in Brasil?
@ositopanda50074 жыл бұрын
Tanque de enfriamiento, pero no se ve que hace.
@user-lg8rt7ly3j5 жыл бұрын
واااو
@SuperSandro315 жыл бұрын
i need this machine when i can get this machine i am from Argentina do you send international ?
@abdooalayb70455 жыл бұрын
Hi I want you to send me one And how much they cost Thanks
@piyushagarwal31146 жыл бұрын
what is the price of this machine we want to purchase it.
please help contac me... give me your email...and price star magma sizer with accecoris
@muktirambe56897 жыл бұрын
i have buy, can you gime email for orde???
@user-pu2ym1tu4d7 жыл бұрын
my friend. . I tried to deafen like her but did not succeed with me. . Is it possible to help me and write me the steps please
@user-rk8qv7qt4n8 жыл бұрын
Hi. I want pan (plate) like that you have... How can I get it?
@leiadochumbo51028 жыл бұрын
ola boa noite quanto vc vende uma maquina dessa
@agood91548 жыл бұрын
Professor please what the price of this machine in any country found
@BallisticianX9 жыл бұрын
In the case of the 9mm this machine's purpose is to just remove bulges in the base area of fired brass. With the tapered profile of the 9mm a push through sizer like this can only size the base and lower 1/3rd of the case body. It would be necessary to run them through a standard sizing die to restore the taper to the upper case body as well as establish the tension to hold the projectile. With true rimless straight wall cases like 40's or .45's this machine will size the case completely and make them ready to load. I ordered one to true up any bulging at the bases of 9mm range brass to prevent binding in my open 9mm major race gun. It is a cheaper and more available option for this purpose than the casepro though the casepro as a roll sizer does restore the taper. I will see just how well it works soon....
@fishblade29 жыл бұрын
what really would happen bad if you didn't plug the holes? Would it just put excess lube over all the bullet?
@NymRoddd10 жыл бұрын
$525.00
@igoracokolenko617610 жыл бұрын
можно ли у вас купит такои станок и па какои цене ?
Пікірлер
Are you using pure lead or lead like wheel weights that has antimony and other stuff in it?
you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer.
you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
, you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer.
They are sons of bitches, you buy an expensive machine, but then they don't answer the emails, no mold, no die, no spare parts, no answer. Sons of bitches.
The videos are very interesting, you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
, you should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
You should also publish a video where you say that you do not provide any after-sales service, nor do you answer emails in more than a year, bastards
I bought them a magma star with a heat base,air cylinder, and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts
.I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts
I bought them a magma star with a heat base ,air cyliinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts,
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
I bought them a magma star with a heat base,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315- 316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315- 316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
I bought them a magma star with a heat base and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts, they are bastards.
I bought them a magma star with a heat base and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts
I bought them a magma star with a heat base air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies or spare parts,
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
I bought them a magma star with a heat base ,air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
I bought them a magma star with a heat base , air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds or spare parts,
I bought them a magma star with a heat base a air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 die but it really is a useless 315-316, I would think twice before to buy something from these people. Especially a $13,000 machine. Because you may not get dies,molds, or spare parts,
I bought them a magma star with a heat base, air cylinder and some dies, and many molds,,, but now they don't sell me the dies, nor do they answer, I also bought them a 313 but it really is a useless 315-316, I would think twice before to buy something from these garbage people. Especially a $13,000 machine. Because you may not get dies or spare parts,
How do you replace the wing that cuts off the excess lead? Can you make a video on that? Big ask I know.
Spru plate replacement.
I can run mine out ol lube, yet there is still an inch or so of lube in the bottom. I had turned the plunger (?) as far down as possible. Still no lube in the pressure assembly. Unscrew that plunger as you showed. Add half a stick lube and the black knurled piece is INCHES away from the threads. What am i doing wrong. Great machine when everything is right.
Please is there a way to make the lead more flexible?
Roll pins suck, cant use detent pins or something?
How much is in dollars
Gostaria de comprar este produto.
pues ten cuidado ,no te hagan como a mí que les compré una máquina y no me contestan los correos para comprar recalibradores ni recambios ,son unos malnacidos
Mais um link e inscrito aí no seu canal .Amigo sou só BRASIL como faço pra comprar uma dessa vluu obrigado.
Alguém mim vende esse gotejado
Do You send in Brasil?
Tanque de enfriamiento, pero no se ve que hace.
واااو
i need this machine when i can get this machine i am from Argentina do you send international ?
Hi I want you to send me one And how much they cost Thanks
what is the price of this machine we want to purchase it.
where i can buy??? my email is [email protected]
please help contac me... give me your email...and price star magma sizer with accecoris
i have buy, can you gime email for orde???
my friend. . I tried to deafen like her but did not succeed with me. . Is it possible to help me and write me the steps please
Hi. I want pan (plate) like that you have... How can I get it?
ola boa noite quanto vc vende uma maquina dessa
Professor please what the price of this machine in any country found
In the case of the 9mm this machine's purpose is to just remove bulges in the base area of fired brass. With the tapered profile of the 9mm a push through sizer like this can only size the base and lower 1/3rd of the case body. It would be necessary to run them through a standard sizing die to restore the taper to the upper case body as well as establish the tension to hold the projectile. With true rimless straight wall cases like 40's or .45's this machine will size the case completely and make them ready to load. I ordered one to true up any bulging at the bases of 9mm range brass to prevent binding in my open 9mm major race gun. It is a cheaper and more available option for this purpose than the casepro though the casepro as a roll sizer does restore the taper. I will see just how well it works soon....
what really would happen bad if you didn't plug the holes? Would it just put excess lube over all the bullet?
$525.00
можно ли у вас купит такои станок и па какои цене ?