Пікірлер

• 
  @johnnywalker56352 күн бұрын

  Shoot. I came here to learn about how to engage my hydraulic attachments. Just basics.

• 
  @scottisaaks7 күн бұрын

  Why does it only go in reverse

• 
  @vaughan101010 күн бұрын

  Why in the hell are you trying to talk as quiet as possible?

• 
  @kingshitturdislandАй бұрын

  My couplers are pressurized and i cant get hydraulics connected. Any advice on how to depressurize?

• 
  @hotbusa08Ай бұрын

  Very informative thanks

• 
  @justinweis2427Ай бұрын

  Why the hell is this guy whispering?

• 
  @josephperez72292 ай бұрын

  I hate this motor I hate it I hate it I hate it it makes me want to die why won’t this pos start

• 
  @user-22-2 ай бұрын

  I got an old one of these last year, no weights but it starts easy & works well. It’s just like wrestling a *BEAR* (for a female that’s not full of muscles). Thanks for the video. 😁

• 
  @a8075112 ай бұрын

  Never cross the straps. If one fails/comes unhooked for some reason,the whole works fails.

• 
  @jimw70432 ай бұрын

  Great Video. Hey do you guys know how to change the bottom and side shear bars on that model. I have one, but can't figure it out.

• 
  @moline800hdyup42 ай бұрын

  Where's the button to release the bucket inside the cab ? You didn't show any of that ?

• 
  @standardrentals62652 ай бұрын

  @ 1:53 in the video inside the cab it is a toggle switch on the left hand side.

• 
  @NathanHarris-wm9bn3 ай бұрын

  Definitely not correct way, vdot non approved and a skid steer in Va with an attachment requirement is 5 points, grab handles are not approved tie down points

• 
  @alexandria37363 ай бұрын

  How much fuel does it use? For example I need it for a day and know it’s a 3 gallon tank , how many hours does it take to have to refill ? I’m assuming I’ll need to add more at some point

• 
  @standardrentals62653 ай бұрын

  You should get around 8hrs on a tank they are very good on fuel. But how you run the machine will affect consumption, full throttle vs 3/4 throttle hard clay digging vs sand or dirt ect..

• 
  @R94GC3 ай бұрын

  just posted a video to my KZread channel of my 1 ton excavator and a TMK150 tree sheer. crazy how efficient It is!

• 
  @lucashutchins70454 ай бұрын

  Ok when I try and start my Vermeer it won’t crank at all and I just picked it up so it couldn’t be a electrical issue and It was tested before bringing home

• 
  @user-el7tw5jq9v4 ай бұрын

  Can you level a yard with this?

• 
  @standardrentals62654 ай бұрын

  No it just moves material

• 
  @romansh13575 ай бұрын

  Great video

• 
  @SleepNoiseFy6 ай бұрын

  Clutch Vid Thanks ‼️

• 
  @dismantling-LK7 ай бұрын

  Glad to welcome you! Great video, thanks) And my team and I are engaged in demolition and dismantling of houses and clearing of sites. You could say we make beauty. We would like to have such an assistant on our team (I mean) a Vermeer. I've been looking for a long time to buy one of these, but in Russia there are no such things for sale at all...

• 
  @ab-pe2zs9 ай бұрын

  Paul, this is an outstanding video. I rented one of these from a Home Depot and the rental rep did not show half of what you showed. And when the discharge chute became blocked with some stringy elm, your video showed simply how to access the chute to clear the clogged twigs / impacted sawdust. Your company is very lucky to have this sort of knowledgeable person that is a clear communicator as well. THANK YOU!

• 
  @standardrentals62658 ай бұрын

  Thank you very much our goal was just to help people out with the machines.

• 
  @lordad309 ай бұрын

  Just bought one, thanks for the tutorial

• 
  @standardrentals62658 ай бұрын

  No problem, Keep an eye out on the chain tension for the drive they do stretch pretty good over the season.

• 
  @chris77777777ify9 ай бұрын

  Personally want to see it WORKING digging mud

• 
  @standardrentals62658 ай бұрын

  Hope to have one of those videos soon.

• 
  @DemonaterTheAce11 ай бұрын

  Bruh are you really only need two of those ratchet

• 
  @pitfool039 ай бұрын

  4 seperate tie downs. All 4 required. This video is actually NOT a good demonstration of how to hook up the chains. Chains under tension that are touching are an issue.

• 
  @JustinH7211 ай бұрын

  Now to convince the wife this is a better idea then a shovel for digging our fire pit area out!

• 
  @user-ut4kg1do2w Жыл бұрын

  อ้ะจืบๆๆๆ 👆👆👆👿😂😂😂😂😂

• 
  @sunishmi6637 ай бұрын

  Price

• 
  @randywilson6869 Жыл бұрын

  How much does that attachment cost

• 
  @standardrentals6265 Жыл бұрын

  They are around 5k

• 
  @tacomafan7488 Жыл бұрын

  What yeas is this mini ?

• 
  @standardrentals6265 Жыл бұрын

  It is a 2021

• 
  @joshmcaloon6998 Жыл бұрын

  Crossing the chains is not recommended. one loosens they all loosen. And I don’t think DOT would like the metal on metal

• 
  @philliphall5198 Жыл бұрын

  They make the best is what I know and a tad high but will last a long time with hard use

• 
  @standardrentals6265 Жыл бұрын

  It has been a excellent machine so far.

• 
  @rolfsteinmann41409 ай бұрын

  ​@@standardrentals6265 , Hi wat its de preis for you Maschine Dumper . Lg Swiss- man 😊

• 
  @pedropalacioareitio3045 ай бұрын

  Deseo sader algo del dunper ya que solo hablo Español me llamo pedro de Bilbao

• 
  @siradansifre Жыл бұрын

  Do you have any video for how to lift a skid steer with a boom truck?

• 
  @standardrentals6265 Жыл бұрын

  Sorry we do not

• 
  @joshuastevens5910 Жыл бұрын

  Nice. Chains can’t be touching each other if you cross chain

• 
  @gregamoreno1 Жыл бұрын

  DOT Will pull you over if they see chains touching, as well as loose chain hanging without bungee cords. And can be really picky and get you if the hook from the binder is on the weld side of the link.

• 
  @jeffmotes21299 ай бұрын

  @@gregamoreno1thanks

• 
  @AUSTINTENO1 Жыл бұрын

  Good work guys.

• 
  @standardrentals6265 Жыл бұрын

  Thanks it is a great little machine

• 
  @KETO_DIET Жыл бұрын

  🧐Looks like the best way to do it!👍‍ A secured load can prevent a pull over from DOT. They pull people over if they spot one thing wrong. Working brakes and trailer lights also extremely important!

• 
  @standardrentals6265 Жыл бұрын

  Thanks, Yes a secured load is so important.

• 
  @joshuastevens5910 Жыл бұрын

  Except chaining this way, DOT will pull you over cause it’s cross chained and chains are touching each other.

• 
  @joshuastevens5910 Жыл бұрын

  @@KETO_DIET Why? I drive truck for a living and haul equipment. Chains can’t touch each other when chained down.

• 
  @joshuastevens5910 Жыл бұрын

  @@KETO_DIET You can cross chain, you just have to make sure they don’t touch. As you’re going down the road for miles and miles, the bouncing creates friction. And next thing you know your chains break.

• 
  @zedwpd Жыл бұрын

  @@joshuastevens5910 My dump trailer has 4' walls. Not going to notice. ;)

• 
  @williammunny7133 Жыл бұрын

  If its not asking too much would you give me a full description of your trailer, payload and such.

• 
  @standardrentals6265 Жыл бұрын

  Not a problem at all specs for the trailer are Cargo Weight (the amount of weight that can be hauled on the trailer) - 10,370 lbs (4,703 kg) GVW (total trailer weight) - 14,000 lbs (6,350 kg) Axles 2 - 7,000 lbs capacity with torsion suspension (no leaf springs makes smoother ride and less wear parts and ride height is lower) Measurement Between Fenders - 83" (6' 11") Deck Length - 240" (20') Hitch Size - 2-5/16" Plug Type - 7 blade RV Skid Steer weight 6593 lb

• 
  @williammunny7133 Жыл бұрын

  @@standardrentals6265 Thanks

• 
  @easternfarmmachinery3742 Жыл бұрын

  They are manufactured by Messersi out of Italy for Wacker

• 
  @standardrentals6265 Жыл бұрын

  they are a great little machine

• 
  @darwindropmazda Жыл бұрын

  Very well done

• 
  @standardrentals6265 Жыл бұрын

  Thank you very much!

• 
  @MaxMustermann-yj1wz Жыл бұрын

  Price?

• 
  @standardrentals6265 Жыл бұрын

  Depends on where your located and price has changed a few times around 30k CAD

• 
  @2Years2Farm Жыл бұрын

  Let’s go

• 
  @2Years2Farm Жыл бұрын

  Second

• 
  @AUSTINTENO1 Жыл бұрын

  First

• 
  @strangus Жыл бұрын

  Good video. Thanks!

• 
  @standardrentals6265 Жыл бұрын

  Glad you liked it!

• 
  @dakahulaz59 Жыл бұрын

  How much you pay for it?

• 
  @Ignauhak Жыл бұрын

  3:44 To tighten these, you'll need a 15mm wrench, or 2 15mm wrenches... I operated a hired BC700XL today, and unfortunately its chimney got blocked, and I was unable to open it due to the inherent awkwardness of the 2 holding bolts' positions... Any tips for how to go through that process?

• 
  @standardrentals6265 Жыл бұрын

  Yes it is a little awkward spot to get into we use a socket and ratchet is the best way

• 
  @ab-pe2zs9 ай бұрын

  @@standardrentals6265 The rental shop that I rented from had replaced the nuts with 17mm. I used a open ended 17mm spanner for the bottom one and just a 17mm socket for the top one.

• 
  @87GP4002 жыл бұрын

  Very well done ! Thanks for the info.

• 
  @standardrentals62652 жыл бұрын

  Glad it was helpful!

• 
  @youtoobe5562 жыл бұрын

  This is the Tonka truck we've all dreamed about as kids.

• 
  @standardrentals62652 жыл бұрын

  It sure is!

• 
  @chrismcguire39172 жыл бұрын

  Considering the abuse you must see with this equipment, this video is an excellent idea.

• 
  @standardrentals62652 жыл бұрын

  We hope it Helps

• 
  @bma42032 жыл бұрын

  A local family owned equipment dealer has this very model they had as a rental. It never once was rented and they offered it to me for $1500 today…. That’s why I found this vid just trying to learn up on it b4 I just buy it. The things brand new never used sat in a enclosed trailer for 4 Yrs I guess. ??

• 
  @standardrentals62652 жыл бұрын

  we will have some videos coming of it working for $1500 you cant go wrong

• 
  @bma42032 жыл бұрын

  What’s honest thoughts on this. I do lawn renovations and have came across many many tree stumps in yards.. I like those fact that this is affordable and smaller so can get into back yards ect. I’m concerned tho on its ability to chew through a stump. Does it take forever ? What’s biggest stump you’d say this machine is capable of handling ?? Thanks in advance for your time ..

• 
  @standardrentals62652 жыл бұрын

  It will do any size of stump just takes more time the larger it is, as far as how fast really depends on type of tree how long the stump has been there. Also cutting teeth and there condition make all the difference in the world if they are dull your not doing much. All I can say it is a great machine for doing a couple stumps here and there you wouldn't want to be behind it all day, you are doing the sweeping across the stump and pushing it around to get to the stumps it can be a work out.

• 
  @gregmccarter2176 Жыл бұрын

  I'm going to use green teeth on my homemade grinder...its always a good idea to cut the stump as short as possible...a stump grinder is a milling machine..go slow even sweeps..most people don't know how to operate a stump grinder..

• 
  @brendenbaxter32692 жыл бұрын

  This is the video you are looking for if you want clear operating instructions.

• 
  @standardrentals62652 жыл бұрын

  Thank you that's what we were going for

• 
  @Ghostly-002 жыл бұрын

  Yep

• 
  @indoorgardeningguy16682 жыл бұрын

  Amazing! I love Standard Rentals

• 
  @standardrentals62652 жыл бұрын

  thanks