In this video we show our preferred way to chain down a skid steer to a trailer
Жүктеу.....
Пікірлер: 24
@KETO_DIET Жыл бұрын
🧐Looks like the best way to do it!👍 A secured load can prevent a pull over from DOT. They pull people over if they spot one thing wrong. Working brakes and trailer lights also extremely important!
@standardrentals6265
Жыл бұрын
Thanks, Yes a secured load is so important.
@joshuastevens5910
Жыл бұрын
Except chaining this way, DOT will pull you over cause it’s cross chained and chains are touching each other.
@joshuastevens5910
Жыл бұрын
@@KETO_DIET Why? I drive truck for a living and haul equipment. Chains can’t touch each other when chained down.
@joshuastevens5910
Жыл бұрын
@@KETO_DIET You can cross chain, you just have to make sure they don’t touch. As you’re going down the road for miles and miles, the bouncing creates friction. And next thing you know your chains break.
@zedwpd
Жыл бұрын
@@joshuastevens5910 My dump trailer has 4' walls. Not going to notice. ;)
@darwindropmazda Жыл бұрын
Very well done
@standardrentals6265
Жыл бұрын
Thank you very much!
@joshuastevens5910 Жыл бұрын
Nice. Chains can’t be touching each other if you cross chain
@gregamoreno1
Жыл бұрын
DOT Will pull you over if they see chains touching, as well as loose chain hanging without bungee cords. And can be really picky and get you if the hook from the binder is on the weld side of the link.
@jeffmotes2129
9 ай бұрын
@@gregamoreno1thanks
@a8075113 ай бұрын
Never cross the straps. If one fails/comes unhooked for some reason,the whole works fails.
@siradansifre Жыл бұрын
Do you have any video for how to lift a skid steer with a boom truck?
@standardrentals6265
Жыл бұрын
Sorry we do not
@2Years2Farm Жыл бұрын
Second
@williammunny7133 Жыл бұрын
If its not asking too much would you give me a full description of your trailer, payload and such.
@standardrentals6265
Жыл бұрын
Not a problem at all specs for the trailer are Cargo Weight (the amount of weight that can be hauled on the trailer) - 10,370 lbs (4,703 kg) GVW (total trailer weight) - 14,000 lbs (6,350 kg) Axles 2 - 7,000 lbs capacity with torsion suspension (no leaf springs makes smoother ride and less wear parts and ride height is lower) Measurement Between Fenders - 83" (6' 11") Deck Length - 240" (20') Hitch Size - 2-5/16" Plug Type - 7 blade RV Skid Steer weight 6593 lb
@williammunny7133
Жыл бұрын
@@standardrentals6265 Thanks
@joshmcaloon6998 Жыл бұрын
Crossing the chains is not recommended. one loosens they all loosen. And I don’t think DOT would like the metal on metal
@AUSTINTENO1 Жыл бұрын
First
@NathanHarris-wm9bn3 ай бұрын
Definitely not correct way, vdot non approved and a skid steer in Va with an attachment requirement is 5 points, grab handles are not approved tie down points
@DemonaterTheAce Жыл бұрын
Bruh are you really only need two of those ratchet
@pitfool03
10 ай бұрын
4 seperate tie downs. All 4 required. This video is actually NOT a good demonstration of how to hook up the chains. Chains under tension that are touching are an issue.
Пікірлер: 24
🧐Looks like the best way to do it!👍 A secured load can prevent a pull over from DOT. They pull people over if they spot one thing wrong. Working brakes and trailer lights also extremely important!
@standardrentals6265
Жыл бұрын
Thanks, Yes a secured load is so important.
@joshuastevens5910
Жыл бұрын
Except chaining this way, DOT will pull you over cause it’s cross chained and chains are touching each other.
@joshuastevens5910
Жыл бұрын
@@KETO_DIET Why? I drive truck for a living and haul equipment. Chains can’t touch each other when chained down.
@joshuastevens5910
Жыл бұрын
@@KETO_DIET You can cross chain, you just have to make sure they don’t touch. As you’re going down the road for miles and miles, the bouncing creates friction. And next thing you know your chains break.
@zedwpd
Жыл бұрын
@@joshuastevens5910 My dump trailer has 4' walls. Not going to notice. ;)
Very well done
@standardrentals6265
Жыл бұрын
Thank you very much!
Nice. Chains can’t be touching each other if you cross chain
@gregamoreno1
Жыл бұрын
DOT Will pull you over if they see chains touching, as well as loose chain hanging without bungee cords. And can be really picky and get you if the hook from the binder is on the weld side of the link.
@jeffmotes2129
9 ай бұрын
@@gregamoreno1thanks
Never cross the straps. If one fails/comes unhooked for some reason,the whole works fails.
Do you have any video for how to lift a skid steer with a boom truck?
@standardrentals6265
Жыл бұрын
Sorry we do not
Second
If its not asking too much would you give me a full description of your trailer, payload and such.
@standardrentals6265
Жыл бұрын
Not a problem at all specs for the trailer are Cargo Weight (the amount of weight that can be hauled on the trailer) - 10,370 lbs (4,703 kg) GVW (total trailer weight) - 14,000 lbs (6,350 kg) Axles 2 - 7,000 lbs capacity with torsion suspension (no leaf springs makes smoother ride and less wear parts and ride height is lower) Measurement Between Fenders - 83" (6' 11") Deck Length - 240" (20') Hitch Size - 2-5/16" Plug Type - 7 blade RV Skid Steer weight 6593 lb
@williammunny7133
Жыл бұрын
@@standardrentals6265 Thanks
Crossing the chains is not recommended. one loosens they all loosen. And I don’t think DOT would like the metal on metal
First
Definitely not correct way, vdot non approved and a skid steer in Va with an attachment requirement is 5 points, grab handles are not approved tie down points
Bruh are you really only need two of those ratchet
@pitfool03
10 ай бұрын
4 seperate tie downs. All 4 required. This video is actually NOT a good demonstration of how to hook up the chains. Chains under tension that are touching are an issue.