Look, little Jimmy is going left. John is going left. Now Jayson is going left. Oh look, Jemery is going left. Little Jimmy is going left again. Whats that? Thats Jayson going left. I have a feeling Jemery is about to go left. And there he goes. Jeremy is going left.
@bascubadiver Жыл бұрын
Local shop putting in carpet oval, and Im looking to get a new pan car. Can anybody assit me with who is still manufaturing carpet pan cars, and how do you rate them from best to worst.
@RCChoppercx2 Жыл бұрын
How about with the no prep drag cars we have now?
@mcpappyracing1326 Жыл бұрын
We have many drag racers using our dynos.
@dannyvonduck6592 жыл бұрын
I'd love to see a video with a car with tuned 26cc + engine
@fromthebackofmymind2 жыл бұрын
So if Tesla scaled down the Plaid could it use A.I. self drive mode?
@scottleggejr9 ай бұрын
Can we remove the "flips on roof" mode?
@fromthebackofmymind2 жыл бұрын
My my. If your buzzed how could you even watch?
@phoenixeyes61922 жыл бұрын
very fast cars, loved the racing
@andrewflowers23712 жыл бұрын
How can I get one of those dynos
@mcpappyracing13262 жыл бұрын
You can buy them at www.McPappyRacing.com
@fredgalehouse45672 жыл бұрын
Yeah looks like all you got to do to win this race is not get wrecked. Took out two cars first lap should have been a restart
@R.B_B2 жыл бұрын
Amazingly fast. This track is flat or have angle?
@mcpappyracing13262 жыл бұрын
It's flat.
@youknoweverything7643 Жыл бұрын
No banking it's not angle it's called banking but it's flat all carpet ovals are flat because it's hard to make a indoor perfectly smooth banked oval carpet track and 90 percent of carpet tracks at clubs use it for both oval and road course racing. Like our local club they bought the 2019 snowbirds track and we use it for both oval and road course and it's nice cuse we get to run on the snowbirds exact same size and carpet oval all year round to get our cars perfected for the snowbirds each year during club race days We race every Thursday and sat and Sunday when it's on road cuse we add a few jumps and race off road on Sundays and open for practice all week long
@mikenovick90632 жыл бұрын
Like the dyno…where can I purchase it?
@mcpappyracing13262 жыл бұрын
www.McPappyRacing.com
@mrskunk6972 жыл бұрын
I need this how much for one rtr out of box?
@mcpappyracing13262 жыл бұрын
Our web store will dynamically change the price based on your selections (size, 2WD, 4WD, etc)
@mcpappyracing13262 жыл бұрын
Give us a call and we can fine tune a dyno for your needs.
@robanderson41373 жыл бұрын
you gonna make one big enough to handle an XMaxx?
@mcpappyracing13263 жыл бұрын
We should have a 24" wide version soon.
@colemanbinyon70633 жыл бұрын
Can you use this for a nitro car?
@mcpappyracing13263 жыл бұрын
Yes you can. The "brushless" in the name is referring to the dedicated slave motor which provides consistent resistance. You can do any types of vehicles: electric, nitro, rubber band powered... you name it.
@colemanbinyon70633 жыл бұрын
McPappy Racing thanks! Is there a max power rating? I put a mod .28 nitro on my 2wd slash. The engine is advertised as 3.74 hp
@mcpappyracing13263 жыл бұрын
@@colemanbinyon7063 We built these like a tank. You can't hurt them. There are 1" bearings that hold the roller that are rated for 2000 lbs each. We have many racers using our dynos up to 1/5th scale. They have massive horsepower. Our dyno handles it no problem.
@telinoz19753 жыл бұрын
If you have dual motors, 1 drives the front wheels and 1 drives the rear wheels I assume you could make a dyno with a dual load/flywheel setup to see how balanced the power distribution is. The tuning can be done a number of ways after that. Dual ESC means % of throttle can be adjusted. So a dual dyno would make this possible, unless you can do it another way?
@telinoz19753 жыл бұрын
As, you can't just turn the car around on a single dyno setup ;-)
@mcpappyracing13263 жыл бұрын
We don't have it shown on the web site yet, but you can ask us to make you one with dual large rollers. So all the goodies you see in the back of the dyno will be up front as well. This gives you a lot of possibilities. You could even have up to 4 slave motors :)
@RCVictoryLane4 жыл бұрын
Yikes...why didn't they red flag after that crash?
@scottleggejr9 ай бұрын
Yea... You DQ the guy who flipped on his lid, give them 15-30 mins to patch up and restart the race. If you have a wreck prior to every driver completing one lap, that's a complete restart in almost every rulebook I've seen. The exceptions being demo derby or monster trucks
@Bahrain_pro_rc4 жыл бұрын
Can i use it for buggy 1/8 scale 4wd
@mcpappyracing13264 жыл бұрын
Yes, we offer 4 different sizes to accommodate all the way up to 1/5th scale. Measure the width of your largest vehicle to determine which dyno size to buy.
@johnbravo75424 жыл бұрын
they look super expensive
@mcpappyracing13264 жыл бұрын
Similar to a mechanic investing in a good tool, these will pay for themselves easily over time. The level of functionality and time saving convenience is valuable to many people.
@johnbravo75424 жыл бұрын
@@mcpappyracing1326 yes agree
@mohammednasser82034 жыл бұрын
if i order dyno its come with all parts on these vedio?
@mcpappyracing13264 жыл бұрын
They dyno frame comes built like you see in the pictures. Here is the list of electronics that comes with it. www.mcpappyracing.com/dyno.php#electronics
@lightningdad134 жыл бұрын
I am very interested in this dyno. only question I have is how fast can I go on the rollers.
@mcpappyracing13264 жыл бұрын
This dyno is built overkill. You can't hurt it. The bearings are a massive 2" (seen at the 2:10 mark) and each rated for over 2000lbs. The only limiting factor is the rubber on the roller. We ship with bicycle tubing which mechanically holds, plus we glue it to the roller. But if you want, we can upgrade you to some silicone bands that are about 4 times thicker. We use the dyno's with 3.0 turn open modified brushless motors with no issues. We have customers that use it for drag racing and then there is guys using it up to 1/5th scale nitro pushing some serious horsepower. So far, all reports are good. No issues.
@lightningdad134 жыл бұрын
@@mcpappyracing1326 that's good. I am a speed runner with some of the fastest cars in the world. 160mph+ I just wanted to make sure it can hold up to challenge I would put it through.
@mcpappyracing13264 жыл бұрын
@@lightningdad13 I built a dyno for a tethered car customer. Only thing we did different was the heavy duty silicone bands with super glue instead of the usual E6000 glue. He was pushing 200+ MPH speeds.
@kenroyendyk84364 жыл бұрын
Please contact me I want to purchase a dyno RTR
@mcpappyracing13264 жыл бұрын
Hi Ken, contact us any time and we can build you a RTR dyno. KZread does not offer your contact info, so you'll have to reach us. www.mcpappyracing.com/contactus.php
@curtisfrederick90445 жыл бұрын
This is super i need it. now can someone give me an idea of the actual cost to have fully ready to use
@mcpappyracing13265 жыл бұрын
Contact us any time and we can get you a quote customized for your needs. www.mcpappyracing.com/contactus.php
@markamd15 жыл бұрын
Absolutely amazing!!!
@srt_jay49316 жыл бұрын
where do you get this
@mcpappyracing13266 жыл бұрын
www.mcpappyracing.com
@babrusfalcon43346 жыл бұрын
plz tell me about it price in pak currency i want to buy it from pakistan .thanks
@mcpappyracing13266 жыл бұрын
Google offers currency exchange rates. As of right now, it's 13,927 or 23,216 Pakistani Rupee (depending on single or dual arm version). Shipping would be extra of course.
@shedred19676 жыл бұрын
Love it, I will buy version 3.0. When will it be released?
@mcpappyracing13266 жыл бұрын
There is no version 3 planned. I think we nailed it. The platform is rock solid, should last a lifetime, and can do motor to motor or chassis testing with tons of adjust-ability.
@kevthor4656 жыл бұрын
Where do i buy the extra stuff???
@mcpappyracing13266 жыл бұрын
We have direct links to electronics here: www.mcpappyracing.com/dyno.php#electronics Call us if you have any questions.
@Levy_Wilson6 жыл бұрын
These are like super high end helping hands. I'm still a beginner, my soldering iron hasn't even arrived yet, and I really want these but I don't have $200 to spend on one. Maybe one of these days if I can turn this fledgling hobby of mine into a profitable venture, I will buy one. But for now I can just put these on my wish list.
@sfox847 жыл бұрын
This is by far the best, and most well thought out RC chassis dyno I have seen yet. What size would you recommend for the 1/10 E-Revo, and the Axial Yeti XL ??? I need this in my RC arsonal. :)
@mcpappyracing13264 жыл бұрын
You can measure the width of your widest vehicle to determine how big of a dyno to get.
@torgmeister7 жыл бұрын
the tubing on mine is starting to go, do you have "tech specs" :D on the bicycle tubing it came with?
@mcpappyracing13267 жыл бұрын
Sure thing. You can use any bicycle tire that is about 2.6"-2.8" (measured deflated, pressing flat). You can order from us if needed, or here is what we use: www.jensonusa.com/Tubes/Surly-29-X-3-Presta-Valve-Tube . I cut to size, then invert the tube so smooth side is out. Wash it well. Stretch it out. Wet it with rubbing alcohol or window cleaner, and stretch it on. The alcohol/window cleaner will evaporate. Once it's on and dry, I then roll a long screwdriver in between the roller and tube. This allows me to insert a Q-tip with E6000 (or similar glue). If you want more durability, you can use a bunch of rubber bracelets.
@mcpappyracing13264 жыл бұрын
We now offer some optional heavy duty silicone rings. They are 4x as thick as the tubing.
@malikatta517 жыл бұрын
very nice work
@mcpappyracing13267 жыл бұрын
Thanks Malik!
@TheRealRCSparks7 жыл бұрын
You presented this like a pro. Great screen presence, and great delivery :)
@mcpappyracing13267 жыл бұрын
Thanks for the nice comments.
@thercsniper11387 жыл бұрын
SO many people have NO idea how important presentation and presence actually are.....GREAT point RCSparks.....and great vid McPappy. I cannot tell you all how many videos that otherwise may have had great information but I bailed out in seconds because im sorry, I think it is your responsibility as a presenter and channel manager to master these skills, or at least TRY, if you want our attention, and more importantly our ''likes'' and ''subs''......sad that so many don't get this.
@livingstonrc47067 жыл бұрын
McPappy Racing can I use it for a nitro engine
@mcpappyracing13267 жыл бұрын
Randomthing1222 Yes you sure can, and if you are using computer control, it can control the throttle servo too.
@JasonBlack665 жыл бұрын
lol a creepy pro - what a demeanour! Cant wait to try the dyno though
@TheRealRCSparks7 жыл бұрын
I LOVE THiS!! So Super cool guys! :)
@TarushGandhi7 жыл бұрын
what is that thingy called please ( under the cars )
@mcpappyracing13267 жыл бұрын
RC Brushless Chassis Dyno
@m0gwai277 жыл бұрын
damn cool!
@Track13News7 жыл бұрын
Nice, very informative, keep up the great work!
@o.cwithers36427 жыл бұрын
this is awesome I watch this vid twice thanks
@mcpappyracing13267 жыл бұрын
Glad you like it. If you ever have any questions, I'll be available to answer them for you.
@o.cwithers36427 жыл бұрын
+McPappy Racing James trust me I will be intouch thank you very much again.
@StealthFPV8 жыл бұрын
Nice video bro, awesome idea and work! I'm sure this could be used in the speed run community as well.. 👍👍
@RcAVENTURE.V.F.R8 жыл бұрын
nice brother 👍 👍 excellent
@MorfarsdkVrksted8 жыл бұрын
Wao, awsome job, if you have a spare one left over in europe one day, i would love to play around with it, on my nerdy RC channel =) Tommy / morfars.dk
@RJ-kx2ck8 жыл бұрын
Holy smokes this is amazing I personally would not have the need for one or the knowledge to use lol !! but I'm smart enough to see the advantage to learn and and owning one if you were into the racing scene of any type truly awesome..
@torgmeister8 жыл бұрын
Any boards other than Denkovi USB 4 channel relay (model# RAS-05-15) you'd recommend. It's only available from Bulgaria it seems?
@mcpappyracing13268 жыл бұрын
I'm sure there are, but the programming of Denkovi works great on computers through command prompt or AutoHotKey. Not sure about others.
@SeanN-588 жыл бұрын
My search is over, these are the ultimate helping hands! Bought mine at Christmas time to use for soldering at work. I can hold an XLR connector in one clamp and perfectly position my wire in the other, leaving both hands free to solder. Sooo much easier than the standard hands like you showed. Thanks James, your helping hands are an engineering marvel. I love the way I can move the arms any way I want and lock it all down with one knob. I've been bragging about it, hopefully I can convince others to make a smart, small investment. 5 Stars
@mcpappyracing13268 жыл бұрын
Glad you like it as much as I do Sean. Like a good tool, it should last a lifetime too.
@NadavIgra8 жыл бұрын
That's badass.
@mcpappyracing13268 жыл бұрын
Hi Sue, sure thing. Just contact us and we ship to the UK for you.
@SueKentathome8 жыл бұрын
I love the look of this, I have short arms with no thumbs to grip, hope I can get it in the Uk
@chrispowell90158 жыл бұрын
I use a similar product at work in a machine shop, it has the hydraulic arms for a magnetic indicator base. Best thing since sliced bread. Can't wait to get one for my r/c cars!! I've heard nothing but good from Mr James at Mcpappy, great guy and awesome products!!!
Пікірлер
A main 😂
4 cars taken out damn
Look, little Jimmy is going left. John is going left. Now Jayson is going left. Oh look, Jemery is going left. Little Jimmy is going left again. Whats that? Thats Jayson going left. I have a feeling Jemery is about to go left. And there he goes. Jeremy is going left.
Local shop putting in carpet oval, and Im looking to get a new pan car. Can anybody assit me with who is still manufaturing carpet pan cars, and how do you rate them from best to worst.
How about with the no prep drag cars we have now?
We have many drag racers using our dynos.
I'd love to see a video with a car with tuned 26cc + engine
So if Tesla scaled down the Plaid could it use A.I. self drive mode?
Can we remove the "flips on roof" mode?
My my. If your buzzed how could you even watch?
very fast cars, loved the racing
How can I get one of those dynos
You can buy them at www.McPappyRacing.com
Yeah looks like all you got to do to win this race is not get wrecked. Took out two cars first lap should have been a restart
Amazingly fast. This track is flat or have angle?
It's flat.
No banking it's not angle it's called banking but it's flat all carpet ovals are flat because it's hard to make a indoor perfectly smooth banked oval carpet track and 90 percent of carpet tracks at clubs use it for both oval and road course racing. Like our local club they bought the 2019 snowbirds track and we use it for both oval and road course and it's nice cuse we get to run on the snowbirds exact same size and carpet oval all year round to get our cars perfected for the snowbirds each year during club race days We race every Thursday and sat and Sunday when it's on road cuse we add a few jumps and race off road on Sundays and open for practice all week long
Like the dyno…where can I purchase it?
www.McPappyRacing.com
I need this how much for one rtr out of box?
Our web store will dynamically change the price based on your selections (size, 2WD, 4WD, etc)
Give us a call and we can fine tune a dyno for your needs.
you gonna make one big enough to handle an XMaxx?
We should have a 24" wide version soon.
Can you use this for a nitro car?
Yes you can. The "brushless" in the name is referring to the dedicated slave motor which provides consistent resistance. You can do any types of vehicles: electric, nitro, rubber band powered... you name it.
McPappy Racing thanks! Is there a max power rating? I put a mod .28 nitro on my 2wd slash. The engine is advertised as 3.74 hp
@@colemanbinyon7063 We built these like a tank. You can't hurt them. There are 1" bearings that hold the roller that are rated for 2000 lbs each. We have many racers using our dynos up to 1/5th scale. They have massive horsepower. Our dyno handles it no problem.
If you have dual motors, 1 drives the front wheels and 1 drives the rear wheels I assume you could make a dyno with a dual load/flywheel setup to see how balanced the power distribution is. The tuning can be done a number of ways after that. Dual ESC means % of throttle can be adjusted. So a dual dyno would make this possible, unless you can do it another way?
As, you can't just turn the car around on a single dyno setup ;-)
We don't have it shown on the web site yet, but you can ask us to make you one with dual large rollers. So all the goodies you see in the back of the dyno will be up front as well. This gives you a lot of possibilities. You could even have up to 4 slave motors :)
Yikes...why didn't they red flag after that crash?
Yea... You DQ the guy who flipped on his lid, give them 15-30 mins to patch up and restart the race. If you have a wreck prior to every driver completing one lap, that's a complete restart in almost every rulebook I've seen. The exceptions being demo derby or monster trucks
Can i use it for buggy 1/8 scale 4wd
Yes, we offer 4 different sizes to accommodate all the way up to 1/5th scale. Measure the width of your largest vehicle to determine which dyno size to buy.
they look super expensive
Similar to a mechanic investing in a good tool, these will pay for themselves easily over time. The level of functionality and time saving convenience is valuable to many people.
@@mcpappyracing1326 yes agree
if i order dyno its come with all parts on these vedio?
They dyno frame comes built like you see in the pictures. Here is the list of electronics that comes with it. www.mcpappyracing.com/dyno.php#electronics
I am very interested in this dyno. only question I have is how fast can I go on the rollers.
This dyno is built overkill. You can't hurt it. The bearings are a massive 2" (seen at the 2:10 mark) and each rated for over 2000lbs. The only limiting factor is the rubber on the roller. We ship with bicycle tubing which mechanically holds, plus we glue it to the roller. But if you want, we can upgrade you to some silicone bands that are about 4 times thicker. We use the dyno's with 3.0 turn open modified brushless motors with no issues. We have customers that use it for drag racing and then there is guys using it up to 1/5th scale nitro pushing some serious horsepower. So far, all reports are good. No issues.
@@mcpappyracing1326 that's good. I am a speed runner with some of the fastest cars in the world. 160mph+ I just wanted to make sure it can hold up to challenge I would put it through.
@@lightningdad13 I built a dyno for a tethered car customer. Only thing we did different was the heavy duty silicone bands with super glue instead of the usual E6000 glue. He was pushing 200+ MPH speeds.
Please contact me I want to purchase a dyno RTR
Hi Ken, contact us any time and we can build you a RTR dyno. KZread does not offer your contact info, so you'll have to reach us. www.mcpappyracing.com/contactus.php
This is super i need it. now can someone give me an idea of the actual cost to have fully ready to use
Contact us any time and we can get you a quote customized for your needs. www.mcpappyracing.com/contactus.php
Absolutely amazing!!!
where do you get this
www.mcpappyracing.com
plz tell me about it price in pak currency i want to buy it from pakistan .thanks
Google offers currency exchange rates. As of right now, it's 13,927 or 23,216 Pakistani Rupee (depending on single or dual arm version). Shipping would be extra of course.
Love it, I will buy version 3.0. When will it be released?
There is no version 3 planned. I think we nailed it. The platform is rock solid, should last a lifetime, and can do motor to motor or chassis testing with tons of adjust-ability.
Where do i buy the extra stuff???
We have direct links to electronics here: www.mcpappyracing.com/dyno.php#electronics Call us if you have any questions.
These are like super high end helping hands. I'm still a beginner, my soldering iron hasn't even arrived yet, and I really want these but I don't have $200 to spend on one. Maybe one of these days if I can turn this fledgling hobby of mine into a profitable venture, I will buy one. But for now I can just put these on my wish list.
This is by far the best, and most well thought out RC chassis dyno I have seen yet. What size would you recommend for the 1/10 E-Revo, and the Axial Yeti XL ??? I need this in my RC arsonal. :)
You can measure the width of your widest vehicle to determine how big of a dyno to get.
the tubing on mine is starting to go, do you have "tech specs" :D on the bicycle tubing it came with?
Sure thing. You can use any bicycle tire that is about 2.6"-2.8" (measured deflated, pressing flat). You can order from us if needed, or here is what we use: www.jensonusa.com/Tubes/Surly-29-X-3-Presta-Valve-Tube . I cut to size, then invert the tube so smooth side is out. Wash it well. Stretch it out. Wet it with rubbing alcohol or window cleaner, and stretch it on. The alcohol/window cleaner will evaporate. Once it's on and dry, I then roll a long screwdriver in between the roller and tube. This allows me to insert a Q-tip with E6000 (or similar glue). If you want more durability, you can use a bunch of rubber bracelets.
We now offer some optional heavy duty silicone rings. They are 4x as thick as the tubing.
very nice work
Thanks Malik!
You presented this like a pro. Great screen presence, and great delivery :)
Thanks for the nice comments.
SO many people have NO idea how important presentation and presence actually are.....GREAT point RCSparks.....and great vid McPappy. I cannot tell you all how many videos that otherwise may have had great information but I bailed out in seconds because im sorry, I think it is your responsibility as a presenter and channel manager to master these skills, or at least TRY, if you want our attention, and more importantly our ''likes'' and ''subs''......sad that so many don't get this.
McPappy Racing can I use it for a nitro engine
Randomthing1222 Yes you sure can, and if you are using computer control, it can control the throttle servo too.
lol a creepy pro - what a demeanour! Cant wait to try the dyno though
I LOVE THiS!! So Super cool guys! :)
what is that thingy called please ( under the cars )
RC Brushless Chassis Dyno
damn cool!
Nice, very informative, keep up the great work!
this is awesome I watch this vid twice thanks
Glad you like it. If you ever have any questions, I'll be available to answer them for you.
+McPappy Racing James trust me I will be intouch thank you very much again.
Nice video bro, awesome idea and work! I'm sure this could be used in the speed run community as well.. 👍👍
nice brother 👍 👍 excellent
Wao, awsome job, if you have a spare one left over in europe one day, i would love to play around with it, on my nerdy RC channel =) Tommy / morfars.dk
Holy smokes this is amazing I personally would not have the need for one or the knowledge to use lol !! but I'm smart enough to see the advantage to learn and and owning one if you were into the racing scene of any type truly awesome..
Any boards other than Denkovi USB 4 channel relay (model# RAS-05-15) you'd recommend. It's only available from Bulgaria it seems?
I'm sure there are, but the programming of Denkovi works great on computers through command prompt or AutoHotKey. Not sure about others.
My search is over, these are the ultimate helping hands! Bought mine at Christmas time to use for soldering at work. I can hold an XLR connector in one clamp and perfectly position my wire in the other, leaving both hands free to solder. Sooo much easier than the standard hands like you showed. Thanks James, your helping hands are an engineering marvel. I love the way I can move the arms any way I want and lock it all down with one knob. I've been bragging about it, hopefully I can convince others to make a smart, small investment. 5 Stars
Glad you like it as much as I do Sean. Like a good tool, it should last a lifetime too.
That's badass.
Hi Sue, sure thing. Just contact us and we ship to the UK for you.
I love the look of this, I have short arms with no thumbs to grip, hope I can get it in the Uk
I use a similar product at work in a machine shop, it has the hydraulic arms for a magnetic indicator base. Best thing since sliced bread. Can't wait to get one for my r/c cars!! I've heard nothing but good from Mr James at Mcpappy, great guy and awesome products!!!
Amazing product!! Can't wait to use mine!