You presented this like a pro. Great screen presence, and great delivery :)

@mcpappyracing1326

7 жыл бұрын

Thanks for the nice comments.

@thercsniper1138

7 жыл бұрын

SO many people have NO idea how important presentation and presence actually are.....GREAT point RCSparks.....and great vid McPappy. I cannot tell you all how many videos that otherwise may have had great information but I bailed out in seconds because im sorry, I think it is your responsibility as a presenter and channel manager to master these skills, or at least TRY, if you want our attention, and more importantly our ''likes'' and ''subs''......sad that so many don't get this.

@livingstonrc4706

7 жыл бұрын

McPappy Racing can I use it for a nitro engine

@mcpappyracing1326

7 жыл бұрын

Randomthing1222 Yes you sure can, and if you are using computer control, it can control the throttle servo too.

@JasonBlack66

5 жыл бұрын

lol a creepy pro - what a demeanour! Cant wait to try the dyno though

I LOVE THiS!! So Super cool guys! :)

Nice video bro, awesome idea and work! I'm sure this could be used in the speed run community as well.. 👍👍

Holy smokes this is amazing I personally would not have the need for one or the knowledge to use lol !! but I'm smart enough to see the advantage to learn and and owning one if you were into the racing scene of any type truly awesome..

Nice, very informative, keep up the great work!

Absolutely amazing!!!

this is awesome I watch this vid twice thanks

@mcpappyracing1326

7 жыл бұрын

Glad you like it. If you ever have any questions, I'll be available to answer them for you.

@o.cwithers3642

7 жыл бұрын

+McPappy Racing James trust me I will be intouch thank you very much again.

This is by far the best, and most well thought out RC chassis dyno I have seen yet. What size would you recommend for the 1/10 E-Revo, and the Axial Yeti XL ??? I need this in my RC arsonal. :)

@mcpappyracing1326

4 жыл бұрын

You can measure the width of your widest vehicle to determine how big of a dyno to get.

nice brother 👍 👍 excellent

Any boards other than Denkovi USB 4 channel relay (model# RAS-05-15) you'd recommend. It's only available from Bulgaria it seems?

@mcpappyracing1326

8 жыл бұрын

I'm sure there are, but the programming of Denkovi works great on computers through command prompt or AutoHotKey. Not sure about others.

I'd love to see a video with a car with tuned 26cc + engine

Love it, I will buy version 3.0. When will it be released?

@mcpappyracing1326

6 жыл бұрын

There is no version 3 planned. I think we nailed it. The platform is rock solid, should last a lifetime, and can do motor to motor or chassis testing with tons of adjust-ability.

damn cool!

If you have dual motors, 1 drives the front wheels and 1 drives the rear wheels I assume you could make a dyno with a dual load/flywheel setup to see how balanced the power distribution is. The tuning can be done a number of ways after that. Dual ESC means % of throttle can be adjusted. So a dual dyno would make this possible, unless you can do it another way?

@telinoz1975

3 жыл бұрын

As, you can't just turn the car around on a single dyno setup ;-)

@mcpappyracing1326

3 жыл бұрын

We don't have it shown on the web site yet, but you can ask us to make you one with dual large rollers. So all the goodies you see in the back of the dyno will be up front as well. This gives you a lot of possibilities. You could even have up to 4 slave motors :)

the tubing on mine is starting to go, do you have "tech specs" :D on the bicycle tubing it came with?

@mcpappyracing1326

7 жыл бұрын

Sure thing. You can use any bicycle tire that is about 2.6"-2.8" (measured deflated, pressing flat). You can order from us if needed, or here is what we use: www.jensonusa.com/Tubes/Surly-29-X-3-Presta-Valve-Tube . I cut to size, then invert the tube so smooth side is out. Wash it well. Stretch it out. Wet it with rubbing alcohol or window cleaner, and stretch it on. The alcohol/window cleaner will evaporate. Once it's on and dry, I then roll a long screwdriver in between the roller and tube. This allows me to insert a Q-tip with E6000 (or similar glue). If you want more durability, you can use a bunch of rubber bracelets.

@mcpappyracing1326

4 жыл бұрын

We now offer some optional heavy duty silicone rings. They are 4x as thick as the tubing.

I am very interested in this dyno. only question I have is how fast can I go on the rollers.

@mcpappyracing1326

4 жыл бұрын

This dyno is built overkill. You can't hurt it. The bearings are a massive 2" (seen at the 2:10 mark) and each rated for over 2000lbs. The only limiting factor is the rubber on the roller. We ship with bicycle tubing which mechanically holds, plus we glue it to the roller. But if you want, we can upgrade you to some silicone bands that are about 4 times thicker. We use the dyno's with 3.0 turn open modified brushless motors with no issues. We have customers that use it for drag racing and then there is guys using it up to 1/5th scale nitro pushing some serious horsepower. So far, all reports are good. No issues.

@lightningdad13

4 жыл бұрын

@@mcpappyracing1326 that's good. I am a speed runner with some of the fastest cars in the world. 160mph+ I just wanted to make sure it can hold up to challenge I would put it through.

@mcpappyracing1326

4 жыл бұрын

@@lightningdad13 I built a dyno for a tethered car customer. Only thing we did different was the heavy duty silicone bands with super glue instead of the usual E6000 glue. He was pushing 200+ MPH speeds.

This is super i need it. now can someone give me an idea of the actual cost to have fully ready to use

@mcpappyracing1326

5 жыл бұрын

Contact us any time and we can get you a quote customized for your needs. www.mcpappyracing.com/contactus.php

How about with the no prep drag cars we have now?

@mcpappyracing1326

Жыл бұрын

We have many drag racers using our dynos.

Like the dyno…where can I purchase it?

@mcpappyracing1326

2 жыл бұрын

www.McPappyRacing.com

what is that thingy called please ( under the cars )

@mcpappyracing1326

7 жыл бұрын

RC Brushless Chassis Dyno

if i order dyno its come with all parts on these vedio?

@mcpappyracing1326

4 жыл бұрын

They dyno frame comes built like you see in the pictures. Here is the list of electronics that comes with it. www.mcpappyracing.com/dyno.php#electronics

Where do i buy the extra stuff???

@mcpappyracing1326

6 жыл бұрын

We have direct links to electronics here: www.mcpappyracing.com/dyno.php#electronics Call us if you have any questions.

Can i use it for buggy 1/8 scale 4wd

@mcpappyracing1326

4 жыл бұрын

Yes, we offer 4 different sizes to accommodate all the way up to 1/5th scale. Measure the width of your largest vehicle to determine which dyno size to buy.

you gonna make one big enough to handle an XMaxx?

@mcpappyracing1326

3 жыл бұрын

We should have a 24" wide version soon.

How can I get one of those dynos

@mcpappyracing1326

2 жыл бұрын

You can buy them at www.McPappyRacing.com

where do you get this

@mcpappyracing1326

6 жыл бұрын

www.mcpappyracing.com

I need this how much for one rtr out of box?

@mcpappyracing1326

2 жыл бұрын

Our web store will dynamically change the price based on your selections (size, 2WD, 4WD, etc)

@mcpappyracing1326

2 жыл бұрын

Give us a call and we can fine tune a dyno for your needs.

Can you use this for a nitro car?

@mcpappyracing1326

3 жыл бұрын

Yes you can. The "brushless" in the name is referring to the dedicated slave motor which provides consistent resistance. You can do any types of vehicles: electric, nitro, rubber band powered... you name it.

@colemanbinyon7063

3 жыл бұрын

McPappy Racing thanks! Is there a max power rating? I put a mod .28 nitro on my 2wd slash. The engine is advertised as 3.74 hp

@mcpappyracing1326

3 жыл бұрын

@@colemanbinyon7063 We built these like a tank. You can't hurt them. There are 1" bearings that hold the roller that are rated for 2000 lbs each. We have many racers using our dynos up to 1/5th scale. They have massive horsepower. Our dyno handles it no problem.