Chiming in. I've had a CXRacing kit on my 97 MX5 since 2018. I daily'd it for a while, ran it hard on weekends, and basically every time i take it out.. and a few hundred mile road trips. The ONLY things Ive changed from the CXRacing kit, is the exhaust manifold gasket (new OEM multilayer is better), dremmel'd out the WGA hole to fix boost creep (Thank you Greg AKA CarPassion) and made my own turbo flange gasket. The Downpipe fit perfect, the manifold was welded nicely and has had no cracks. Its been on 15PSI this whole time, and everything has still held up (knock on wood) around 250whp/240wtq. The "V2" kit (mine) was definitely WAY BETTER than the original they put out. I heard nothing but bad things on the version 1.
@Marco-uk1xy3 ай бұрын
What turbo size and brand is that ? Since you said in the vid you’re running a different turbo. I have the same kit but for a 1.8L but the turbo that comes with doesn’t spool very well
@user-yv7gl8ur8m3 ай бұрын
So I put these in and now my rear ride height is way higher. Is that normal or did I do something wrong?
@dvn.frnkln4 ай бұрын
slightly confused. so since you didn’t use the harness bar for the harness does that not make this a waste of money?
@cesarcorrea76415 ай бұрын
What ecu you running ?
@AkaRyrye835 ай бұрын
NOTE TO ANYONE INSTALLING THESE - in the video they were installed upside down and will contact the frame at full compression. Just saying ...
@ezhiksobolevskii4325 ай бұрын
Where are you, my friend?
@bonisyafialdi22865 ай бұрын
Did you feel tie rod shacking?
@crushboss6 ай бұрын
What did that poor car do to you to deserve that.
@bradleyratliff68816 ай бұрын
do you remeber the bolt size for the oil feed and oil return lines when they connect to the turbo. That’s the last thing i need to do on my car but i don’t know what size they are
@bloodyknuckles13377 ай бұрын
I just found this channel in 2024 last 4 vids are 2y ago 3y ago 3y ago and 4years ago lmao at least speak to your subscribers morron
@dope9noisey9027 ай бұрын
This pretty easy to install?
@mjb2427 ай бұрын
I bought one of those Kemso 340 pumps, I liked the way it ran but it only lasted 2 weeks in my daily driver. I have always had good luck with Walboro and recently tried the AEM pump and it was okay.
@Sp_Builds7 ай бұрын
Ecu and oil feeds?
@PrtclWav8 ай бұрын
Add a bong
@Shh39518 ай бұрын
where..is...bro
@CxlebHan8 ай бұрын
How well have they held up?
@s7Switch9 ай бұрын
2 years since last update? where is he?
@michaelbingham13669 ай бұрын
Awesome job,but did it give code on check engine 😂
@fonliako9 ай бұрын
Still waiting for your videos bro. Hope you’re doing well
@otcboyz9 ай бұрын
what’s the hp different from stock?
@MrJylkka10 ай бұрын
Hey I think I have this car currently. I bought it about 6 years ago and it has the same exact harness bar and sunroof panel
@_nuclearism343310 ай бұрын
bro we miss u
@SergioMartinez-lg1dt11 ай бұрын
The next episode never came /: Hope you’re doing well Maybe one day we will get a notification of an upload thanks for all the lovely videos
@justin540mph6 Жыл бұрын
How do you get it tuned to run correctly after turbocharging a engine? Do you get it done by someone locally?
@angelaguilarta Жыл бұрын
Come back
@407_ryan8 Жыл бұрын
classic, disappeared and never to be heard from again
@DarkDMD Жыл бұрын
Hey dude - did you get it dyno tuned? can you share the dyno sheet? I'm considering getting one vs. a kswap, but wanted to compare mid range torque for the fun of daily driving...
@joshuacisneros1361 Жыл бұрын
what year is your car, I have plans to tune a 1998 but I,m not sure if is possible, because what I know is that the last year is 1995
@Ddrift1995 Жыл бұрын
Yeah i can hear the lack of psi. If you have a welded dif you can really hear when the psi gets low. Crank that shit up to like 50. Also where tf you been bruh?
@ajcampinha Жыл бұрын
hope you’re doing well and staying healthy 🤟🏻
@Evoandrs Жыл бұрын
What size intercooler You have. Headlights and fog light fits? Bumper needed trimming?
@alexgriffith5161 Жыл бұрын
wish you showed the actual install…
@Marco-uk1xy Жыл бұрын
What turbo are you running? My T3 is from the kit. Spools HELLA slow.
@siyabongasibanyoni4824 Жыл бұрын
Bro what did you do in this pipe I love The sound 🔥🔥🔥🥺🥺
@allangreene15ag Жыл бұрын
dude I bet you could do such a good Walt Jr. impression
@jorge8915 Жыл бұрын
Great video thank you❤
@mustangru1900 Жыл бұрын
F tires buy cheap ones from tire shop
@quintonholt Жыл бұрын
👍 what did you do as far as fuel management ecu to tune it?
@Tonyk24 Жыл бұрын
Come back
@rg_barrow Жыл бұрын
Works great actually, and it’s made in Japan.
@GhstEvoX Жыл бұрын
Where you at ?
@Stinkaru17 Жыл бұрын
Man I been looking for this freaking channel for so long!!!!
@joequintanilla6622 Жыл бұрын
Question would that bumper fits in bmw 1995 325i convertible?
Пікірлер
Hey dude where u been?
Updates dude
What thickness of metal did you use?
Chiming in. I've had a CXRacing kit on my 97 MX5 since 2018. I daily'd it for a while, ran it hard on weekends, and basically every time i take it out.. and a few hundred mile road trips. The ONLY things Ive changed from the CXRacing kit, is the exhaust manifold gasket (new OEM multilayer is better), dremmel'd out the WGA hole to fix boost creep (Thank you Greg AKA CarPassion) and made my own turbo flange gasket. The Downpipe fit perfect, the manifold was welded nicely and has had no cracks. Its been on 15PSI this whole time, and everything has still held up (knock on wood) around 250whp/240wtq. The "V2" kit (mine) was definitely WAY BETTER than the original they put out. I heard nothing but bad things on the version 1.
What turbo size and brand is that ? Since you said in the vid you’re running a different turbo. I have the same kit but for a 1.8L but the turbo that comes with doesn’t spool very well
So I put these in and now my rear ride height is way higher. Is that normal or did I do something wrong?
slightly confused. so since you didn’t use the harness bar for the harness does that not make this a waste of money?
What ecu you running ?
NOTE TO ANYONE INSTALLING THESE - in the video they were installed upside down and will contact the frame at full compression. Just saying ...
Where are you, my friend?
Did you feel tie rod shacking?
What did that poor car do to you to deserve that.
do you remeber the bolt size for the oil feed and oil return lines when they connect to the turbo. That’s the last thing i need to do on my car but i don’t know what size they are
I just found this channel in 2024 last 4 vids are 2y ago 3y ago 3y ago and 4years ago lmao at least speak to your subscribers morron
This pretty easy to install?
I bought one of those Kemso 340 pumps, I liked the way it ran but it only lasted 2 weeks in my daily driver. I have always had good luck with Walboro and recently tried the AEM pump and it was okay.
Ecu and oil feeds?
Add a bong
where..is...bro
How well have they held up?
2 years since last update? where is he?
Awesome job,but did it give code on check engine 😂
Still waiting for your videos bro. Hope you’re doing well
what’s the hp different from stock?
Hey I think I have this car currently. I bought it about 6 years ago and it has the same exact harness bar and sunroof panel
bro we miss u
The next episode never came /: Hope you’re doing well Maybe one day we will get a notification of an upload thanks for all the lovely videos
How do you get it tuned to run correctly after turbocharging a engine? Do you get it done by someone locally?
Come back
classic, disappeared and never to be heard from again
Hey dude - did you get it dyno tuned? can you share the dyno sheet? I'm considering getting one vs. a kswap, but wanted to compare mid range torque for the fun of daily driving...
what year is your car, I have plans to tune a 1998 but I,m not sure if is possible, because what I know is that the last year is 1995
Yeah i can hear the lack of psi. If you have a welded dif you can really hear when the psi gets low. Crank that shit up to like 50. Also where tf you been bruh?
hope you’re doing well and staying healthy 🤟🏻
What size intercooler You have. Headlights and fog light fits? Bumper needed trimming?
wish you showed the actual install…
What turbo are you running? My T3 is from the kit. Spools HELLA slow.
Bro what did you do in this pipe I love The sound 🔥🔥🔥🥺🥺
dude I bet you could do such a good Walt Jr. impression
Great video thank you❤
F tires buy cheap ones from tire shop
👍 what did you do as far as fuel management ecu to tune it?
Come back
Works great actually, and it’s made in Japan.
Where you at ?
Man I been looking for this freaking channel for so long!!!!
Question would that bumper fits in bmw 1995 325i convertible?
Whens new video coming out man?
Little stupid punks!
3 years and still no bmw, shit
Trust the process