Welcome to the channel! What you will find here is a variety of different videos. You can expect to see videos featuring, Firearms, Gear, Cars, Pro 2nd amendment / Pro Freedom topics and discussions, the odd video game video here and there. Really I'm just your average guy with a camera who likes to do what most average guys do and bring you guys along for the ride. Feel free to Subscribe, Like, and Share its greatly appreciated! Again welcome to the channel!
Пікірлер
Is that with sub sonic?😅😂
Does it fit the regular 5.56 flash suppressor from surefire?
All the shooting video is on 556 platforms and surefire doesn't make a 30 cal device in 1/2x28. So yes, it'll fit on their socom series of devices.
Excellent review. Looking forward to reviews on the MAC DS 1911 aka Turkatto and the APOLLO 11. More reasonably priced double stacks. STACCATO P $2,500 with taxes is expensive and with a plastic trigger? Peace
The thing to watch on a lot of the less expensive options are MIM parts and lack of hand fitting. I've yet to see one of the more affordable options that hasn't had one of those two things. The trigger isn't hard to change on these I've done 4 now and can knock em out in about 2 hours each. Hardest part is getting the safeties off and figuring out where to shave on the trigger bar. Thanks for the feedback, hopefully one of these companies can figure out to bring the cost down. It's not impossible, but it'll eat in to their margins.
Does this plate require you to change the front site or did you just change it just as a preference? Preferring not to touch the front site if possible...appreciate you input. thx!
You can leave it, it'll just be off. If you want them to be aligned you have to switch. It's pretty easy with the aluminum punch they send.
@@sparda1123 Thank you!
Ngl I’m pissed that I just found this video, meaning that I’ve been searching & searching for a holster video for the staccato p that actually confirms the holster fitment for 6360/90-1582 this needa be on Reddit top pins🤣🤣 saves me a week of searching. I’m hella finnickey with confirming with visual. Thank you so much 🤣
Can you use your Full Auto on this lwrc ic a5 300 blackout sbr..the reason is because most lwrc's stop✋️ at semi auto..
This isn't a machine gun. Any footage you've seen with the upper is with a machine gun lower.
Man. I wanted one of these SO badly. I’m running a KAC sr16 and when I went from the peq15 and ngal to the mawl, I could not mount a scout mount anywhere except directly on the pic and on the lowest setting. Sadly, the mate would not play nice with ‘quad rail’ (the last 5-6 sections on the urx3.1 are pic all the way around), so I had to go with an arisaka, which is still better than nothing
Oof. I was happy to get it working (barely)
Thanks
Great review is it possible to have a flash test at night on the 10.5? How was the gas blowback?
That's badass
Down and away😬
What buttstock is that please?
Thanks for this video , I was gonna use 242 until I saw your video, bought a 262 from Amazon and will be installing my RMR on my C2, by the way did you install a seal plate under the RMR? Thanks again.
Yep. Always have.
Nice magwell
What optic are you running
Trijicon Rmr in the video. It's now wearing an Aimpoint Acro.
My ALS Lever is stiff as hell, any tips ?
The more you use it the more it should loosen up a bit. It's a spring that's tensioning it.
I used DuPont Dry Film Lubricant on mine. Then of course as mentioned breaking it in.
f ect bc of the Staccato mounting plate from Dawson?? Dawson plate has strange circle depression-what is this design for?
2 years later, this video helped a lot while practicing. thank you.
Bruh why didn’t you show us the suppressor 😢
Blame KZread Shorts for lopping it off. The whole gun is in the original.
Glock grip angle sucks
Did you notice a hang up on the disconnect when you first got it?
No issues.
😍
I just bought one but it came with the quad rail. What length rail do you have on yours? Also, where can I purchase the same rail?
I would try LWRC direct. You may not have an ICA5 upper though, so check with them. I don't believe the IC A5 came quad rail but I could be mistaken.
YOU CAN BARELY HEAR IT!!!
That is a steel frame right?
It is.
Sir I want this please parcel to me thanks
I have not purchased the nub yet, but there does not appear to be enough clearance under my SLS hood to add it. Did you have to make any other modifications to make it fit? I have the 6360RDS for Staccato P
Nope, it adds material to widen it instead of bolting around it like the glock designs. You shouldn't have to do any other modifications. Of the 3 designs I did beta testing on with them none of them required modification to the sls.
@@sparda1123 Thanks for the quick response
😁
This shit is hilarious
oh,uh.... 2 please!
Hahaha what is that? That's like shooting a tommy gun with 5 bullets 😭😭😭😭😭 that's torture!
$1/ round and cash only so I did what I could with the cash I had on me. Wasn't going to pass up on the chance.
When your bucket list account has only a $100 in it
Basically. They only took cash and I don't usually walk around with a ton of cash.
Thank you for the visual.
Is that a Six8 Razorback or the PSD?
Neither. A5 IC10.5
Yes, I say um a lot in this video. Quick and dirty one take to get the info out there for those of you considering this mount. Link in description to buy. Hope it helps.
Doesn’t even show the suppressor
It cuts off via KZread shorts. I can post it separately but you likely wouldn't have seen it since the videos don't get around like the shorts do.
Why suppression?? As if they won't know that things shotting at them
I believe it’s more to suppress the muzzle flash more than anything.
im making a 2nd channel before i start posting my staccato experience (pre and post ownership) but i can say the XC is stupid. it feels like youre holding a cheatcode. and i want one this year. ill be picking up a staccato p mostlikely before the month is over. but man let me tell you, that XC ! wow.
Police in Ohio be like:
🤓☝
I have the same for my p226 with TLR1-HL .. now i will change and buy the surefire x300u-a ... Is it possible this omnivore to fit also my x300u-a or i have to buy another ?
The surefire version is meant for the A model. My modification was to accommodate the B model
@@sparda1123 is it possible the omnivore that i bought for my tlr 1hl to fit also x300u-a or i have to buy another holster
@@minasmandalenakis438 missed what you meant the first time, I believe you'd have to buy another. I haven't seen anything on modding one to work. The good thing is, they're not too pricey compared to the light.
Waste of ammo.
🤷♂️ some people like fireworks, I like machine guns. Both are essentially lighting money on fire. If you want to get some training value out of shooting machine pistols, work on your recoil control/ grip and sight tracking.
@nagersemaj9839 I bet your fun at parties
My duty firearm is Glock 17 Gen 5 MOS with RMR & X300U setup. I never shot it well enough to my liking and was never a fan of them. On the other hand, I shot well with Sig. But in the academy they told us these are easy to use and accessories are easy to get and pretty much a brick. So most of the class bought these. I also carry it off-duty EDC OWB holster with no issues. I am thinking about purchasing a Staccato C2 for duty since it will be easy to carry off-duty as well. But I am keep coming back to P and am confused which one to pick. I don't like the magwell thickness in the new P version. I wish some of the local ranges had these in stock to shoot before I can order it.
The magwell should be removable you just need a shorter pin for it. If your in Florida I'd be happy to host you in the central Florida area. I'm a bigger guy so don't have issues concealing a bigger gun but I get it. The staccato is like cheating, if I couldn't use it I'd go M&P 2.0 with apex trigger and barrel. It comes close but still no staccato with the recoil impulse. The P will be softer shooting than the c2 but I'm splitting hairs here. Up to you though, pros and cons to everything. I will say, you will notice the weight difference carrying it over the glock but if you don't walk many miles then it's really not an issue.
To add, I'm at over 6k rounds now and no malfunctions.
@@sparda1123 If I can have mag sit flush with no magwell on P, I'd buy that over C2. Do you know if 16 round C2 mag will sit flush in P after we remove the magwell?
@@8REI- The P flush fit is a 17 in the video. The grip is longer on the P so the 16 won't fit. The c2 is glock 19 size and the p is glock 17 size
@@sparda1123 The P you have and new P are a little different. The new one comes with a larger magwell. The one you have is ideal and my kind of setup.
Which holster number is it for the staccato? I have the prodigy
It's in the description.
Is it ok if use on a 10am hi barrel?
I have to admit , I've always been a traditional 1911 guy , and any variation from the original was blastimy ... Especially one in 9mm ...... But. This Staccato P Duo , has been lurking in the back of my mind like a splinter.... Very intrigued. After the holidays , I think I'm going for it .....
What is the name or item# of that holster? Id like to get it
It's in the description of the video the exact model number.
I have a very high grip on any gun the staccato chews the web of my thumb up but I love the gun best gun I ever shot
Welp, you were right. The 242 did not work. I had the same issue. Mine came loose just after 50 rds. I reset all screws with 271.
I got a good question do you have draw at an angle? Mine requires I do
It's canted more on the UBL mounts it seems. On the drop mounts the cant isn't as bad.
Whats the weight of that unit
Around 11lbs or so if I recall correctly. It's not in that exact configuration anymore.
@@sparda1123 damn she thicccccc I thought my 11.3 was heavy at a bit over 9lbs