Setup:
• Gaming TV: (PUS8517/12)
Philips 4K 65” SDR (VRR 48-60fps) ”Auto Low Latency” 6ms~ latency 12bit Color Depth (DCI-P3 90%)
• Headphones:
Beyerdynamic DT990Pro with Soundblaster G6 DAC (32bit 384khz) Sample Rate
Driven with the SBX mode on, it adds clean and powerful LFE and sharper screamer sound from the DT990pro’s sound)
• Home Theater System:
Logitech Z906 5.1 Surround System - Dolby Digital or DTS Decoded
• Controller:
PS5 Dualsense Cosmic Red with Black Precision Rings “Kontrolfreek” With Inferno High Top Sticks
Пікірлер
Is Sound blaster g3 enough for dt 990 pro? Do they both sound good together? Is audio level enough?
@@goodboiii1710 Yes! The sound is great, the sound volume is a louder then when just plugged into the controller, for me its on the edge of being almost a little too loud by only almost. They push the headphones to 90% power, G6 will sound a little better in-terms of clarity in audio and willl get so loud it can even damage the headphones, it has enough power to overclock the headphones to 130% MAX volume and that with enough time will hurt your ears and damage the drivers in the headphones. The tips I give in the video are the best ways to use it with PS5 😎👍
@@EverythingPS5Pro thank you dude u are awosome, Can you detect the location of footsteps well in the fps compatitve games?? If the answer is yez Im planning to buy DT 990 PRO+G3
@@goodboiii1710 Yes! Its easier to detect footsteps 👍
How do you have talk to people with this specific headset? Would you have to get an additional microphone just to be able to communicate with people or how does that work?
@@colynyt5651 Correct! These pair of studio headphones do not come with a microphone, a cheap podcast microphone or a modmic is requires to talk with your friends. I use a “Mod Mic Uni”
channel name says everything you need to know
@@blackironseamus1017 😎
This is all a you issue boo. You'll get over it.
@@ZoeyCakes yeah its not the end of the world, I’ll survive. My friends also hate that it looks like this, but yes… I am probably most bothered by it to make an entire video about it 😂👍
I take my contrast and brightness down on both of my monitor settings and Nvidia settings Game does a good job preserving the visuals on that side when many games fail on even that Personally enhancing colors always breaks the intended art direction, more power to you if you want to have it like a constant trip lol
@@knavenformed9436your missing the point of the video, blue black level raise is an issue that should not happen in anygame, they probably made this decision instead of making all assets blue whice would take time, they instead opted to break the colour gamut to make it blue. Its cringe and sad how a big corporation cannot get it right. The blue tint isn’t the issue, as stated in the video. Watch the video again. My colours on my tv are very low to make games artistic intent remain, however my iPhone camera likes to boost orange and blue somewhat, all of my friends on PS5 all have this issue in SDR and in HDR, so no its not local on my system.
@@EverythingPS5Pro Well that's a different issue if the recording tool screws up the issue even harder I could run the game with HDR on PC to see how it does, but I always leave HDR off in any game, it never seems to be consistent and has a lot of problems.
We can just barely see the issue you are talking about if you use a video camera What are you, Darksydephil?
My phone camera shows the issues perfectly fine. For me and the industry its all about calibration accuracy, and this is not made in a proper manner. Blue deletes the details underneath it. It could have been done in a much better way.
yaaf
I’ve never had to deal with this on my game?
🤣🤣 Git Guud ! I had to say it. That explains everything else.
😂😂 yeah yeah
@@EverythingPS5Pro Constructive rant i think. I experience the same thing color pallet gorgeous one minute and sux the next. HDR on ? or HDR off ? Does RTX actually help. My other games, Lies of P, Helldivers 2, Remnant 2 are gorgeous all the time. What gives with ER ?
@@dhopjr57 its the same for me on HDR or SDR. It just looks soo odd 😂
I personally feel the blue is pretty fine, but the black levels are definitely broken here, I mean there is zero detail remaining in the blue sometimes 😂
The blue filter adds a lot of atmosphere giving this world a distinct feel. Making colors pop like a Super Mario game would destroy the whole immersion for me
Nope, its definitely broken. It looks super weird and this video shows it off great. I just didn’t notice it until now 😂
He does explain in the video how the blue tint isn’t the issue. Its just poorly implemented, and bugged.
@@ShadowReaper-te1yz Yes! 😁
What TV is that? The brand and model
Philips Ambilight PUS8517/12
Amazing video! I tried these settings on my lcd, and I was surprised, this is amazing 👍 It completely changed how my TV looks, it looks like a 2x upgrade in visual contrast in the midtones, very cool 👍😎
Thank you soo much!! 🥰🥂
Hey bro, nice video! Are you using ps5? And if yes, how can i get sharp looking picture when playing games in performance
Sharpness 8 and Ultra Resolution Sharpness feature in combination on my TV set looks great, I also sit around 1,5m from my TV. Any more questions or confusion do not feel afraid to ask 😇
@@EverythingPS5Pro I have lg c2, do you have any recommendations for that? 😊
@@Phoenix-zm5gv I would use the FPS mode on the game optimizer mode. I remember Ariel “Plasma TV for Gaming” talking about how the image in his opinion looked a little better on the sharpness on that setting. He makes amazing videos on best LG OLED visual settings for gaming, you should check him out, you can find him in the description of the video 😎👍
@@EverythingPS5Pro Yeah I came from his channel 😄, fps 10 looks not so sharp for my tv, i have heard in your video that you use super resolution to get sharp image. On lg tvs there is also super resolution function. I use ps5, and i play in performance mode so resolution suffers
@@Phoenix-zm5gv try super resolution and see what you think, my tv looks super sharp when I go 80% on the sharpness slider with super resolution. I will go back to this topic SUPER IN-DEPTH when I get myself an LG C4 in the future. You got my promise 👍
I'll share your video as a pinned comment of the video I'm uploading. It's about the same, but I believe I did the opposite you did looking for the same thing
Awesome!! Thanks for watching Ariel, big fan! 🤩❤️
I think you did a great job here
@@plasmatvforgaming9648 hope you tried the whitepoint settings in part 4, it doesn’t look like much on the video but it increased the perceived colour saturation and increased the contrast even more 🤩
Yo what is this
a scary bug that could happen if the PS5 got to hot under gameplay, was a long time ago now and has since been fixed.
@@EverythingPS5Pro okay thank god. By the way i like your videos i subbed
Yet again, amazing settings. Gonna try them tomorrow!🎉
Incredible Comment 🥰👍 Made me smile!
NEW BETTER VIDEO out now! Check out my latest video were I improve your LCD TV to look twice as good with more professional settings rather then fun settings like in this video.
Wow....good to hear all that technical talk there bro. As someone looking to buy ps5 in the future and using surround sound set-up..i really appreciate the quick explaination..
Thanks for the kind words ☺️
Are these presets only for gaming, or for movie and shows as well?
I have more professional settings if thats what your after, this video showcases a more fun looking image for the viewer, more pop and colour saturation. What do you wanna tweak your Philips for?
I would love to get those, i have the -9 settings in your earlier comments. What im after are deep black levels en bright colours in HDR and Dolby Vision
@@TheDarkKnight201 then if HDR is your primary goal, I would recommend u to lower the black level or highten it depending on the content it self. an LG OLED could do this for you and adjust automatically but for us LCD users its a bit of a hassle to use HDR. Its even fake HDR if you put your time into learning about it. Real HDR has a module inside of the TV and it also “kinda” has to be an OLED to really give you that insane contrast and POP! I personally use pretty low settings on my hdr settings and kinda care more about true dark (black levels) that are more correct looking to the eye when watching movies. You will never be without some level of black level raise and still have deep blacks on movies. Almost all movies are dark grey instead of black so you have to force it darker and lose some small insignificant details. Otherwise buy and OLED. Highest Gamma possible Brightness auto adjust mode And low black level and then check out all your favorite movies and look at the dark scenes and adjust so that it looks great in all movies and all scenes.
Ah Thanks! And do you have some recommendation voor SDR picture on my Philips, i used the one in your video and this is already better than i had. Philips HDR is not that great. So the last few times i stick with SDR. And for gaming, the settings in the video are the best?
@@TheDarkKnight201 I am writing the script for a video in question right now for best overall settings, will ping you on release! 😎👍
How did you connect you tv with the Subwoofer?
Optical Cable 😇
I need your help. I don't know how to connect my PC to my Z906 for a true Dolby 5.1 experience. P.S.: Which port will provide true Dolby surround sound? I don't want to experience fake or simulating surround sound.
Use an Optical Cable, and try to get your pc into a mode were it decodes the all audio into Dolby Digital Format. Or use the multi lane cables that came in the box. I actually haven’t tried running the Z906 on a PC so I am mot completely sure how it would be done. But after plugging it in, make sure to select 5.1 surround on the audio mode in windows settings and it “should” be fine…
z906 kullanıcısıyım, son ses seviyesinde oda içinde duramazsın. ayrıca komşu şikayeti üzerine eve polis gelmesi muhtemel.
English please 😇
Get this and add 4 to 6 additional speakers and you will be in for a surprise
Surprised they have not released a new model
Dude awesome video, I got the same setup for my PS5 with a C1 OLED and it's awesome for gaming. I played Ghost of Tsushima and the decode light was on, game set to 5.1 audio and I heard the blacksmith hammering away on metal behind me in the game from the rear channels. It is so immersive. Just turn off the controller speaker so all audio goes to your speakers. Make more content on the best 5.1 sounding games on the PS5, cheers dude!
Will do! Thanks for your kind comment 😇❤️
Hey man, for the sound, you say to use hdmi sound system for hdmi 2, but whenever i try to choose this, it comes up saying cannot switch to audio system. Tv speakers active. Any ideas?
This happens to me aswell, it still works tho, its just a messed up prompt 👍 atleast for me it works… First time I connected my sound system I used an audio splitter to get it working, after that I plugged it out and used optical and the audio just worked without it 😂👍
@@EverythingPS5Pro ah ok cool, that's good to know! I'm actually using an old Sony DAV-DZ260 surround sound system, so it might be a little different for me anyway lol
@@Cheezyb3an but your not getting any audio basically out of your speakers from your tv right? Like that is primarily the issue at hand?
@@EverythingPS5Pro Yeah I just checked and trying to do the TV volume just comes up that TV speakers are turned off in the menu. Must be just a visual bug. I'm on a 50PUS8807.
I'm liking these settings man. Only thing I've changed is the colour temperature to normal instead of warm, and the actual colour setting down to 70 from 100. not a fan of saturation lol. But other than that these are nice! 👌🏻
What do you think about the Tygr 300r for ps5 gaming (especially for footsteps). How do they compare to the DT 990 and would i need a soundblaster g3 or g6. I think it is 32 ohm ( i dont really know what this implies for audio quality but i feel like the more ohm´s the better)
I do only recommend the setup mentioned in the video, I do not have any other recommendations sadly for audiophile PS5 usage scenarios. I know nothing of Tygr 300r sadly, so my information is very limited. Ohm implies the amount of power that is needed to drive the headphones to there highest potential. With do little power to drive them, there will be less bass and clarity and less volume overall and less flexibility on the Equaliser.
if you connect z906 to tv with optical, won't 5.1 passthrough?
I have ps5, LG C1 and just ordered z906.
On my TV it decodes the audio into surround mode when I use the multichannel bypass mode on my designated HDMI port. If your still not getting surround mode (decode mode) then you gotta find a way to tell your tv to translate it into surround. It might be called HDMI CEC or Multichannel Bypass or both. Also make sure the PS5 is plugged in to the HDMI ARC port.
@@EverythingPS5Pro it doesnt have hdmi the z906. It will be connected with optical
@@user-ou7iu6kn2y I was talking about the PS5 using HDMI into the TV, the Z906 system runs via Optical into the TV, then you Decode this via Dolby Digital Format on PS5 or Dolby Atmos on streaming services for a Surround mode to get the correct audio information for (true surround)
Sorry but for UE model its 0/-2 or 4 gamma ? Im confused. I want to test your settings on the pml9008 , Idon't know if it's a good idea but hey let's try. Edit: and I don't know why but but for me , the tv keep reseting the B offset of the withepoint alignment 20 point to -8. and only the b offset. Weird.
Sound like a weird issue, but Philips tvs are weird 😂👍 +4 makes the image transitions from bright to dark (darker) whice is better for color reproduction but will make shadows darker. This is the setting I use in SDR, but in HDR I use the brightest option -4
@@EverythingPS5Pro Oh ok I see , thanks for the quick reply.
@@EverythingPS5Pro Hey , I'm back again. I just figured it out. If I couldn't set the B-offset to -15 on the 20 point, it's because it automatically adjusts according to what I set on the G offset If I set -8 on the G then the b offset will also be -8. So if I want -15 on the B, I have to set -15 on the green too .... Is it better to put -8 on both or -15? Or is it better not to touch the offsets at all , sSorry for the tricky questions but your video is the most usefull for me and my tv model.
Ok nervermind. I've just seen your new calibration in recent comments, it looks way better and it solves my problem because the offsets are at the same level on the first two levels. thanks
@@Cass6ix level 1 is to have ALL three at -15 and the same to level 2
I dont understand why ps5 ditch optic connector.. that way you will not need this TV. Or use hdmi splitter..
Newer TVs have HDMI ARC support and so can steal the HDMI Surround mix from the console and transfer it via optical cable to your audio system 😎👍
@@EverythingPS5Pro Well i suppose most of progamers dont play on TV, so there is nothing to steal. And buying soundbar with HDMI is very expensive
@@OriginalkyCzMost well this sound system can still send out fake 3D surround from the Stereo mix like all gaming headphones do. It sounds great still so there is always that 👍🥰
Hi. Thanks for the guide. Just one more thing. Can you please show me the correct numbers in your EQ? I mean the Soft and Smooth save.
Just try your best to match the settings, it will be fine enough, 31, 62, 125 is to be maxed out, 250 is to be limited all the way, and then lower 500, 1k, 2k and 4k just like in the video, 8k and 16k on flat
i don't think my monitor has a optical cable input
Then the G3 is best for you! Just plug it in to the PS5s USB-C port and use my settings and enjoy.
Check out my newest video instead: m.kzread.info/dash/bejne/X5t4xqSAfde3g9o.html&pp=ygUQRXZlcnl0aGluZ3BzNXBybw%3D%3D This video is outdated and has some wrong information in it. Humans learn newer answers newer stuff all the time, ans in this case I do not stand for what I said in this video anymore. My newer video is key for best surround sound and 3D Audio, however there is no mention of 3D audio in the newer video because Sony’s 3D Audio is trash, using 7.1 Virtual Surround Sound from a Sound Card sounds 10x better!
Hi, does this work with the C3 you were planning on buying? I bought the 42inch LG C3, delivery next week. I am thinking to buy the Z906 to work with this tv but I am concerned I won't be able to get 5.1 through the optical port. thank you
Yes! 😇
@@EverythingPS5Pro Thank you very much for replying to me. May I ask do I use the same playstation and tv settings you explained in this video or are there a few different settings to choose with the C3, playstation and Z906? And finally are you enjoying your C3 and if my son connects his X box X to my new tv would there need to be any different settings? I find this all quite confusing.
@@tomgunn6086 I haven’t had enough money to buy a C3 yet so am thinking of getting a C4 77” later in the summer if everything goes well with my eventual workplace. C4 and G4 do tend to drop in prices, the best would be to get a G4 because of the even brighter nits and great cooling solution to prevent aggressive ABL and burn-in. I really do want to push my OLED to the max and I’ll be making videos on best settings for C3 and C4 whenever I get my hands on one 🥰 I have actually no idea if there are any more “special settings on C3” my tv only has the settings shown in the video and that makes it work fine. I want to create a new updated settings video in the future but I have been gaming and working on other life projects in the meanwhile so its been insanely delayed 😂👏 Edit: it should be fine with the settings I have stated in the video, the xbox might need some tweaking ofcourse but PS5 and TV is just for you to copy my settings 😇
@@EverythingPS5Pro Good luck, I really appreciate your time and effort. I will let you know how I get on. I was concerned the optical out ports on the back of the z906 would not be able to use full 5.1 or there would be software/audio compression problems. But if you have succeeded with a full 5.1 sound then I will try. I look forward to your future videos.
@@tomgunn6086 I just use an optical cable and it just worked for me with the settings mentioned in the video 😇. I do not recommend the use of any audio splitters or weird half assed gadgets 👍
So do i plug the DT 990s into the PlayStation itself, my controller or my monitor for the best quality ?
Soundblaster G3 for best quality, Controller for worse quality and TV for mid quality. Some gaming monitors have really bad audio processing so kinda depends on whice tv or monitor. I recommend the purchase of a Soundblaste G3 and then run my nice EQ for some neat bass boosting and clarity boost. Then there won’t be any better headphones on the market.
@@EverythingPS5Pro thanks.
@@tyarijenkins187 no problem 😇
They should release a new model.. Have been using the Z906 for 10yrs+ … i did replace the original speakers to B&W M1 satellite speakers.. sounds much better
Are you using the same system, but you swapped the satellites? Or am I getting that wrong… that sound cool if that would be possible.
Yeah I am using Z906 system with B&W M1 satellite speakers.. the Z906 uses the standard black & red bare wire connections for speakers.. so you pretty much can upgrade to any speakers you want
@@meat_loves_wasabi what about power management? Aren’t you scared the speakers are gonna try to draw more power then the system is built to drive and break the unit? Or wise versa
@@EverythingPS5Pro Best to check first.. The B&away MT1 recommends amplifier power from 20W-100W The Logitech Z906 satellite speaker is running at 67W per Speaker… so no problem
@@meat_loves_wasabi untill you start to crank up the volume, if it reaches above 67W the built-in EQ and volume levels will collapse and the audio goes into a sorta loud / low volume mode, were crackling is common. Not good for the unit. I’ve checked out some other people trying this on the web, everyone states that it is NOT recommended.
Would this help with low sound cuz I use the 990 pro plug into the controller and it sound really low would the sound blaster g3 help
The Soundblaster G3 with my EQ would give you higher detailed audio, wayy higher volume and wayy more bass 😎, ask me here again when you have it and I’ll help you out 💪
Do I just connect the sound blaster to my ps5 and use it or I have to have a pc
You just simply plug it into your PS5 and it works, (if there are any issues, please contact me via this comment so I can help you troubleshoot!) I am here to help the gaming community get insanely good gaming audio 😎💪
What should I get for ps5? Which one dt770 or dt990 or what? And if so what amp do I need
DT990 Pro and Soundblaster G3
Can you help my DT 990 pro are really quite on PS5 how can I fix that ???
Do you have it plugged into the controller? Use the PS5s audio settings to dial up the volume 😇
It doesn't need to be arc or eark normal hdmi will work
Depends on how old your tv is, and if it can just use your tv for proper processing, most actually won’t work, but some do.
@@EverythingPS5Pro yeah i have some old ass sharp tv but eh I have hdmi arc but normal bitstream passthrough works for my logitech z-5500
@@Michael-hw5qq good for you, you are very lucky in that regard 👍
@@EverythingPS5Pro only shit about my z5500 is that it has a ~6khz noise and I know the pod is faulty but I can't seem to nail down the issue
@@Michael-hw5qq i’d just buy a new set honestly 😂👍
Hi and thanks for the settings . Is your tv an VA ( MVA ) panel ? I have 58pus8556 and tried your settings. It looks great but I have to better try them with movies or tv shows , since I have no ps5 or xbox ( only retrogaming with dreamcast and first xbox or max till xbox 360) . My panel looked trash from the box , with blueish or reddish or greenish image on darker scenes , and almost impossible to see details . Now it seems good at first use ( I only tried on avatar with hdr) . I also found an excel document with some calibration settings for philips 2021 (pus8556 or others) VA panels but I have to also try them . I found it on Av forum thread that discuss the calibration of this panel . I also want to ask you what do you press on the remote to have the picture settings bar ? I have to go by all the panels to reach the full settings menu on mine
Hello there! I just posted a correction settings video, for guys like you to enjoy. It has more accurate settings instead of the more fun looking image that I gave out on this video. I highly recommend you copy those newer settings for an accurate looking image.
Hello there! I have made a new and better video if that would be interesting in anyway to you 😁 it will make your TV look twice as good 😎
Great @@EverythingPS5ProI'll calibrate mine in 2 hours when back home . Really complex to fully understand how to do the advanced calibration the first time ,but really worth . It's completely a new panel
@@alessiobiancalana6068 😁👍
Is ot bluetooth compatible?
No! But there might be some cheap kinda bad bluetooth adapters on Google, however… I DO NOT RECOMMEND THE USE OF THOSE 👏
Thanks
Wie schließe ich die Kopfhöhrer an die PlayStation an?
German Translation: Entweder über den Aux-Anschluss Ihres Fernsehers (TV-Kopfhöreranschluss) oder über die Kopfhörerbuchse des Controllers oder mit einer Soundblaster G3- oder G6-Audiokarte/DAC. English Translation: Either through your TV aux connection (tv headphone port) or through the controllers headphone jack or with a Soundblaster G3 or G6 Audio Card/DAC.
2 more questions: 1 which DAC would you recommend to me? 2 the PlayStation's sound chip never manages 200 ohms... does the DAC regulate that?
@@mandoderechte the best gaming dac available is the Soundblaster G6, plug this into the tv via Optical cable (toslink) and you should be blown away with how good the sound is, I would happily guide you when you purchase one 💪 yes it fixes all lag and audio power issues.
You advise me to buy a DT990PRO headphone over a Sony 5 km ohm 32 80 250+ I need a mixer,
What are you talking about? 😂 what is a Sony 5 Km?? You do not need a mixer or a DAC but to get the best audio possible you will be needing a DAC with a built in EQ to get the best gaming audio experience possible
@@EverythingPS5Pro Can you give me a DAC on the DT990PRO 250 ohm headphone?
@@Clyde-Drew my tip would definitely be Soundblaster G3 if you want to save some money, or go Soundblaster G6 if you want to get an insane experience, but both are REALLY OP!
Does soundblaster g6 work on sony 5
@@Clyde-Drew what is Sony 5?? PS5?
Do you have calibration for 58pus8517 for wathing tv, neflix not gaming? thx
Yes! Very sorry for the slow response, your message didn’t appear until now on my notifications. (For Movies) Colour (55) Backlight Contrast (100) Sharpness (3) Black Level (48) Ultra Resolution (off) Colour Enhancement (off) Colour Gamut (Normal) Colour Temperature: Custom Red 127 Green 120 Blue 100 Red BL (0) Green BL (-5) Blue BL (-7) White Point Alignment 20 point: 1 Red -15 Green -15 Blue -15 2 Red -9 Green -9 Blue -9 Contrast Mode Optimised for Picture HDR Upscaling (On) Dynamic Contrast (Off) Video Contrast (100) Light Sensor (Off) Gamma (4) This mode is also for gaming, its my new calibration for colour and contrast/shadow accuracy. On Game you go 77 colour instead of the settings listed above.
Very useful video, why I cannot get into Decode mode? :(( I followed all steps, no luck. helpppp
Update: it was an option on my TV lol
Hello bro, what model of TV do you have? Nice information
Philips The One PUS8517/12 as of today, but I am soon going to buy an LG C3 EVO OLED 65”, wayyy better TV all around.
@@EverythingPS5Pro A question about your video, when you configure play and TV as you explain, it gives you authentic Dolby Digital, right? But when you configure it, KZread is in Dolby Digital 5.1 or is it only compatible content?
@@oliveralzua all apps including KZread work with Dolby Digital Format (however) in this format normal youtube videos and content from other apps that wasn’t meant to run at 5.1 won’t, and will simply just run in 2.1 Stereo, but in a more lossy stereo then the Matrix 2.1 mode. So yes its real Dolby Digital or DTS if you choose to use this instead. On youtube there is a tick mark that has to be enabled on certain 5.1 compatible videos to enable surround mode, only works on 5.1 metadata videos. Very few videos actually support surround on KZread so you will be listening to 2.1 most of the time sadly. Edit: It will send the raw surround or stereo signal via all speakers and send out the correct audio intervals at correct volume levels even when on the lowest setting. I have back Speakers and the center speaker on zero volume, just so that the audio that comes from them are true surround and not boosted surround effects to make them more noticeable. Its a balancing act in my opinion depenting on how far away the speakers are.
@@EverythingPS5Pro I already checked it, you are right, I already configured my smart TV and play 5, I put content compatible with Dolby Digital 5.1 and now I am listening to true Dolby Digital 5.1, before it was with the “3D” mode but thanks to you I configured everything and now it is real DG 5.1, thanks
@@oliveralzua happy to help the community! ❤️💪
If you take it dt770 pro32 ohm it will better?
DT770 has a little more natural bass because of it being closed back headphones, but with a DAC like the soundblaster g3 the audio will become way better on the DT990Pro, WAYY better audio listening experience and the sound stage sounds super wide and open so it feels more real, with some great bass boost EQs on top of that and your gaming experience will never be the same. My recommendation for under $200 is DT990 Pro combined with Soundblaster G3. Amazing audio and music listening experience 💪😎 All of my friends are using that combo, after listening to my headphones with my supreme settings.
@@EverythingPS5Prowill this work on ps5
@@cardeleon7694 Yes! all of my tips are specifically tailored towards the PS5 Experience.