Пікірлер

• 
  @pamellamiller553120 сағат бұрын

  What size spark plug does this one uses

• 
  @alyoungcuda19 сағат бұрын

  Size of the socket to remove it? Its the larger size 13/16 if i remember, as for the plug part number on it? Don't know..sorry

• 
  @patricialambert57222 күн бұрын

  Oh, thank you so very much!!!!

• 
  @alyoungcudaКүн бұрын

  You're welcome and thanks for watching too...

• 
  @HGLifestyles2 күн бұрын

  your video is excellent. I want to provide you a heated roof system. i hope you can review it for me. Could you give me your email so that i can contact you?

• 
  @alyoungcudaКүн бұрын

  Not sure what system you have send me information to [email protected]

• 
  @HGLifestylesКүн бұрын

  @@alyoungcuda I just sent you an email. Please check your mail:)

• 
  @fvaleoficial2 күн бұрын

  Friend, do you recommend this vehicle?

• 
  @alyoungcuda2 күн бұрын

  Do I recommend it, I would recommend a Toyota or Honda 1st..but this engine does have its problems and losing oil is a big one..you can Google Hyundai 4 cylinder engines and you will see alot of problems..but when they run good, they run good thats all I can say

• 
  @fvaleoficial2 күн бұрын

  @@alyoungcuda Thank you, then do you recommend more Toyota corolla 2015 s?

• 
  @alyoungcuda2 күн бұрын

  @@fvaleoficial any Toyota is a good choice ...

• 
  @bryancorrea96863 күн бұрын

  Had this with a toyota avalon was driving and the light came on but car was running great no spudering no jumping rpms checked the code and was for ignition coil..had them all changed within 2 years I know what a bad coil feels like so this video gave me a relaxed mind

• 
  @alyoungcuda3 күн бұрын

  Thats cool and thanks for watching too...

• 
  @Dan-hb3rd3 күн бұрын

  All that money for Hein Warner you’d think the nuts would be nyloc nuts. 2nd time I saw one missing I replaced all of them.

• 
  @alyoungcuda3 күн бұрын

  That is correct

• 
  @INTERNA93 күн бұрын

  Wooow!

• 
  @jakeworldwide4 күн бұрын

  Do you know this is one of the most famous Seinfeld bits of all time?

• 
  @alyoungcuda3 күн бұрын

  No I didn't, I have to try to look that up now..😆

• 
  @keyboardtek4 күн бұрын

  I used acetone on the 70 year old stains in the garage at this house we just bought. Cheaper than brake cleaner. But laundry detergent worked even better. It is very cheap. Just requires about three applications.

• 
  @alyoungcuda4 күн бұрын

  Interesting, but definitely keep the fumes from ignition which is the dangerous part of using that cleaner...

• 
  @keyboardtek4 күн бұрын

  @@alyoungcuda Acetone evaporates quickly. Which is why it takes three applications to clean anything with it. It is not as volatile as something like gasoline.

• 
  @nopenope1344 күн бұрын

  The circular one is a little better, but even a really deep one will still splash. This is why I use the valvomax drain valves on my car. No splashes, drains with a tube right into the container!

• 
  @alyoungcuda4 күн бұрын

  Have to look into that for my own cars..I gave this pan another try today and its horrible..its messy, but its not my place, its all they have here

• 
  @nopenope1343 күн бұрын

  Are you a mechanic? The aftermarket valves won't work then for customers. Ask to see if you can get the pan with the yellow plastic funnel that goes up and drains into the container: GARAGE BOSS DRAIN PAN 12 QT, or if you have a lift, one of those professional setups that are metal with wheels, and it collects in a big tank.

• 
  @alyoungcuda3 күн бұрын

  @nopenope134 the best one is the pan for antifreeze, it is large and it has a pouring spout..that is the one I use but when I'm at other peoples places and they ask, I will try to use the tools they have and its never a Mechanics choice in tools

• 
  @joeycamarata49974 күн бұрын

  I’m getting that exact sound from the drivers side, I just replaced the sway bar link hoping it would resolve the problem. Any idea what it may be?

• 
  @alyoungcuda4 күн бұрын

  Do you have plastic hubcaps, they rattle too. Sound travels, should of changed the other link also

• 
  @DubT834 күн бұрын

  Would you be able to get the type of compressor for this unit? I am unable to read the part info for my unit

• 
  @alyoungcudaКүн бұрын

  Model is UAMB-042JAZ if this helps you out

• 
  @goaliemojo43104 күн бұрын

  Interested to know what kind of lift you are using to get the cars and trucks you work on so high in the air? Thankful for these videos since I am now diving deep into wrenching with little experience.

• 
  @alyoungcuda4 күн бұрын

  Bendpak scissor lift, goes up 54 inches and its portable and slides under the car in the garage..other brands make them higher and can hold a stronger weight..this holds 6K kzread.info/dash/bejne/fKiq2bxxdbnUlcY.htmlsi=LbFnr9du8Z10ap3K

• 
  @goaliemojo43103 күн бұрын

  ​@@alyoungcuda thanks for that reply...pricey, but great help if I make the purchase. Do you have recommendations to buying this lift product, caliper spreading tool you used as well as the new Duralast rotor and pad replacements online? I'm stoked from your instructions to change my rotors and pads, but did watch a couple others, much less informative, but one I found discussed just the rotor pull process and mentioned using, not a phillips, but a "JIS" version which is like a phillips but different and supposedly designed for these Japanese screws and a better fit and less likely to strip. (kzread.info/dash/bejne/f4yLxcuRebS7nZs.html) I'm sure you're aware of them, just being sure to share if not. Thanks again!!!!

• 
  @letsgetit484 күн бұрын

  So my 130c Husqvarna bump knob broke. But the T25 replacement doesn't fit. I don't see the replacement at lowes, home depot or tractor supply

• 
  @alyoungcuda4 күн бұрын

  I changed my whole string wheel to the easy wind model from lowes made by Husqvarna

• 
  @robertbutwell42724 күн бұрын

  Epson like HP are crooks, the printers are cheap to buy but they make their profit on the ink, it's a con. Non genuine ink cartridges are very hit and miss. You can have a full non genuine cartridge, yet the printer tells you to replace it thanks to their little electronic chips on the cartridge, it's daylight robbery. If your printer jet is blocked and you keep trying to print and your not using any ink or very little, the clever printer cant tell how much ink is in the cartridge, it senses how many times you've requested a print and alters your ink levels accordingly, so you can have a full cartridge yet the damn printer will say the cartridge is empty.

• 
  @alyoungcuda4 күн бұрын

  Makes sense..remember when Apple phones added an update to drain batteries on older phones to phase them out. Now they stop letting you update apps because the phones are old, forcing you to buy a new one at 1k each.

• 
  @trina_trin4 күн бұрын

  Thank you. This was very helpful. This is my first push start/stop car. I was sitting here lost 😂

• 
  @alyoungcuda4 күн бұрын

  Amazing that its nowhere in a manual in the car

• 
  @jadziacortez8605 күн бұрын

  I bought my 2017 g90 used, and it came with ONE key fob that does not have an actual key (i’ve checked while replacing the tiny battery recently) i’m guessing it was the backup key? It’s still lighting up red when i push the buttons. Anyway, do i need a locksmith to come break in to open my car and replace the battery?

• 
  @alyoungcuda5 күн бұрын

  You can try the Genesis dealer, they might be able to make a key for you, otherwise a car locksmith can make you a key..otherwise you can call either aaa if you have or a mobile car place to just open your drivers or passenger door and you can open the hood , it has 2 terminals there and you can jump the battery to open the trunk with the trunk button on the dash.

• 
  @kurlykolly6 күн бұрын

  Thanks 😅

• 
  @alyoungcuda5 күн бұрын

  Thanks and thanks for watching too

• 
  @drmrsthemonarch97276 күн бұрын

  Not even 10 mins, and I had it fixed. Thank you.

• 
  @alyoungcuda6 күн бұрын

  Thats faster than when I filmed it..lol Thanks for watching too...

• 
  @christy31006 күн бұрын

  This didn't work for me. Any other suggestions? Nothing at all prints.

• 
  @alyoungcuda6 күн бұрын

  Wow, nothing at all..I have no other guesses..if it sat for a long time, the ink might be dried very hard, you can try another cleaning with the q tips, after that it might be time for a new one

• 
  @JohnSmith-xz5fb6 күн бұрын

  What do you mean don't forget to clear the codes? Can I just replace with new relay? What else must I do for it to work? Change code?

• 
  @alyoungcuda5 күн бұрын

  The code is set in the cars computer, reset the code or you will still have a check engine light on

• 
  @JohnSmith-xz5fb4 күн бұрын

  @@alyoungcuda You take the negative off the battery wait five minutes and you reset the codes. At least answer my question if you are going to reply. Thanks ;)

• 
  @alyoungcuda4 күн бұрын

  @@JohnSmith-xz5fb that doesn't work on all cars and thats why I don't mention it. Thats old school hope it works magic..

• 
  @printzproductions92447 күн бұрын

  Thanks for the video! I have to change my mother in law's belt tomorrow, It split on her a block from her house.

• 
  @alyoungcuda6 күн бұрын

  Take your time, you'll be alright..good luck and thanks for watching too...

• 
  @clintprice21237 күн бұрын

  Nice to see a product that does as they claim it does! I’ll look for that in the local store to have on hand, thanks Al.

• 
  @alyoungcuda7 күн бұрын

  Works pretty good...

• 
  @MJsonniedee8 күн бұрын

  How many miles on the car before you decided to replace it? Is it easier to go in from the bottom?

• 
  @alyoungcuda8 күн бұрын

  No room from the bottom to remove and as for the mileage, I didn't check..but some can last as long as the car, so its a give or take on when it will go bad if it does...

• 
  @centurionkingsley44738 күн бұрын

  Can’t find this product anywhere.

• 
  @alyoungcuda8 күн бұрын

  Last seen sold in advance auto parts stores

• 
  @maxoklock48058 күн бұрын

  The Calipers are also unfortunately junk, replaced front hoses and calipers 6K ago, started dragging after a pad/rotor change. had to warranty LF caliper today it started getting hot enough to smell hot brake smell driving in traffic. Pulled over and a bunch of going backwards and forwards slamming on brakes. It unstuck it enough to make it the 40MI back to the house to save a tow bill

• 
  @alyoungcuda8 күн бұрын

  Wow, I never had a problem with any rebuilt calipers, only thing I ever noticed was the oversized bleeder screws

• 
  @davidjackson28468 күн бұрын

  Great video. I really appreciate you sharing. I am at the point where I don't trust the parts changers at the typical dealership to put things back together correctly any more so looks like I am going to dive in and do it.

• 
  @alyoungcuda8 күн бұрын

  If you don't have any left over hardware and parts, you did a good job...good luck on yours and thanks for watching too...

• 
  @davidjackson28463 күн бұрын

  It took me 4 hours. Most of the time was fighting the back two plenum bolts and brackets. I had to loosen the brackets on both sides to get them to line up and the bolts started. I think the bottom bolt on the left would have been easier to remove and put back. But either way your video was a huge blessing. And it runs great with no left over parts!

• 
  @alyoungcuda3 күн бұрын

  @@davidjackson2846 that's awesome and thanks for watching too

• 
  @cristinodelossantos83658 күн бұрын

  Thanks

• 
  @alyoungcuda8 күн бұрын

  You're welcome and thanks for watching

• 
  @kayflwr12399 күн бұрын

  thanks for this video 💚

• 
  @alyoungcuda9 күн бұрын

  You're welcome and thanks for watching too...

• 
  @tonymilan40159 күн бұрын

  What was the problem because I'm having the and issue changed the pump and filter

• 
  @alyoungcuda9 күн бұрын

  On this car it was the brand new pump that was recently installed from a shop..on yours, check or change the fuel pump relay

• 
  @sworks4589 күн бұрын

  Thanks for the video, this happened to me exactly . New fuel pump assy, and then ran out of gas - Guage said 3/4 tank. 😮🤦‍♀️

• 
  @alyoungcuda9 күн бұрын

  Yes, installed wrong or not careful with the installation can damage the unit since it is made of plastic...

• 
  @truckerkevthepaidtourist9 күн бұрын

  🎶 I got me a car it's as big as a whale and it's about to set sail!! I got me a Chrysler it seats about 20 so hurry up and bring your jukebox money! THE LOVE SHACK IS A LITTLE OLD PLACE WHERE WE CAN GET TOGETHER 🎶

• 
  @alyoungcuda9 күн бұрын

  Perfect song for this car...😆

• 
  @truckerkevthepaidtourist9 күн бұрын

  @@alyoungcuda 😂 yeah it came right to mind when I saw the size of that land yact and it's full front to back wheel base

• 
  @ayaanmk429910 күн бұрын

  Please can u tell me why my engine vibrate when I gas the my Elantra 2014 or even parking the car vibrate please can u help me out to tell me what is the reason it vibrate

• 
  @alyoungcuda10 күн бұрын

  Change your vvt solenoid , its on my channel for this same car

• 
  @GRNSdatboisheed11 күн бұрын

  What does it mean if you have a no crank no start (I hear a spinning noise when I'm cranking the key). Then when I finally get it to crank it runs fine. I have to let the car idle for a while or go on a drive before I can turn it off without it not cranking right up when I turn it off. But after my car is running for a while I can turn it off and on with no problem. Does that mean my starter is going bad?

• 
  @alyoungcuda10 күн бұрын

  If you hear a spinning noise and its not your engine spinning over, then yes it is the starter going bad

• 
  @BLD-sl4cm11 күн бұрын

  I find that another good way to do this if you're not hanging jeans and you're hanging like sweatpants that don't have a loop is to pull them through like you would normally Let The Hanger stop at the halfway point pull the bottom of the legs up and fold the very bottom around the hanger and then fold the top down like you normally would

• 
  @alyoungcuda11 күн бұрын

  Yes, I did that in a way like you said for my sweats..its easier and up out if the way for sure..thanks for the tip and thanks for watching too...

• 
  @BLD-sl4cm11 күн бұрын

  @@alyoungcuda thanks for the great video, help save me a lot of space

• 
  @AvaTaylor-s3g11 күн бұрын

  Great instructions!

• 
  @alyoungcuda11 күн бұрын

  Thanks and thanks for watching too...

• 
  @jfkesq11 күн бұрын

  lol!!! That is dirty as shit!!!!

• 
  @jamesbon112 күн бұрын

  What about the wiring from the old motor to the new motor? I'm stuck. I don't know what goes where. No instructions in the box

• 
  @alyoungcuda12 күн бұрын

  What do you mean? Its a plug connection, pull the connector off and plug it into the new one..unless you bought a universal one with no plug, I can't help you with that.

• 
  @jamesbon112 күн бұрын

  @@alyoungcuda thank you for answering. The dryer is about 20 years old, but it runs well. It just needed a new motor. It was an old motor with the wiring plugged in separately. Now a new motor that has one large terminal with the connectors inside. I was able to find instructions online; red wire to 5, blue wire to 1, etc..

• 
  @alyoungcuda12 күн бұрын

  @@jamesbon1 hopefully the wiring matches and it runs..

• 
  @jamesbon112 күн бұрын

  @@alyoungcuda Yes, it works. Black = 2, Yellow = 6, Red = 5, Grey = 4/or connect to back and Blue = 1. Hope this helps others in my situation.

• 
  @alyoungcuda11 күн бұрын

  @@jamesbon1 thanks for the tips

• 
  @oldmanrebel299612 күн бұрын

  That’s what they do! They want you taking it to the dealership to pay 250 for a simple oil change. Guys like us….they don’t like us. Ya know real men that are not confused about twigs and berrys…willing to work on our own cars? Just saying.

• 
  @alyoungcuda10 күн бұрын

  Totally agree

• 
  @christianheidt573312 күн бұрын

  Simply stunning 🤩!!!!

• 
  @alyoungcuda10 күн бұрын

  Definitely a Nice Ride

• 
  @vincentvillanueva323412 күн бұрын

  Planned obsolescence

• 
  @alyoungcuda10 күн бұрын

  Yes

• 
  @TobyReynolds-q5l12 күн бұрын

  You could just put half a quart of oil of fresh oil in the oil filter neck with the oil drain plug out to flush out the old oil !

• 
  @alyoungcuda10 күн бұрын

  Thats true but a waste of fresh oil at these prices...😆

• 
  @chomplin529212 күн бұрын

  Just drive the car up on one ramp

• 
  @alyoungcuda10 күн бұрын

  Looks like next time the ramps go in the back...😆

• 
  @stevenwilgus542213 күн бұрын

  I was 13 years old. The benefit of being 70 means that I remember seeing all of the models on the road, in their heyday. Quite often we remember their taillights. Thanks!

• 
  @jeknechtphotography710613 күн бұрын

  Beautiful car Al. Your "new" ride?

• 
  @alyoungcuda13 күн бұрын

  No, helped buy it for a friend, I have to many..😆

• 
  @miguelberetta788713 күн бұрын

  Just jack up the back

• 
  @alyoungcuda10 күн бұрын

  Ruins the main purpose of using ramps..😆

• 
  @aaronlittle426113 күн бұрын

  Quick fix.. throw a 2.5 ton floor jack on the rear.

• 
  @alyoungcuda10 күн бұрын

  Kinda defeats the purpose of ramps, might as well pull out the scissor lift

• 
  @aaronlittle426110 күн бұрын

  The plug defeated your ramps. I’m giving fast solution. Btw you definitely would not use a scissor lift. Perhaps you meant telehandler which is more commonly known as a skytrak. Perhaps you even meant forklift. But please don’t try a scissor lift lol

• 
  @alyoungcuda10 күн бұрын

  @aaronlittle4261 your thinking scissor lift as in lifting up people to like windows and such, I meant this lift 😆 kzread.info/dash/bejne/fKiq2bxxdbnUlcY.htmlsi=p6am8LDv98UOg5VK

• 
  @alyoungcuda10 күн бұрын

  @aaronlittle4261 but a jack in the rear will help, unfortunately the rear bumper will be tilted down and hopefully a jack will slide under...

• 
  @aaronlittle42619 күн бұрын

  @@alyoungcudathat is cool. It’s a spin on the standard car lifts at shops. Very cool. And yes that could pose a challenge after on ramps. But back to that sweet lift. Have you used them?

• 
  @49erryder65013 күн бұрын

  Awesome. Quick and to the point.

• 
  @alyoungcuda13 күн бұрын

  Thanks, no sense dragging it out and I didn't mention to give a thumbs up or a like...lol.. thanks for watching , nobody does that except for Me..

• 
  @holly-jothompson371713 күн бұрын

  Thank you i just bougt a display/demo epson wf2860 and it has ink but wasnt putting ink on paper . Im going to inspect and then Im betting ima have to clean all 4 but hey at least itll be cleaned up ready. Bought on clearsnce @ 60% or more discounted from original price Did also buy exted coverage plan for what its worth Lol First time trying to print something with it using my mac airbook

• 
  @holly-jothompson371713 күн бұрын

  Well 2nd run of the built in print head cleaning cycle And just printed test page progress instead nothing printed The 3 colors printed With some missing spots in each So Running 3rd cleaning cycle

• 
  @dre98313 күн бұрын

  Mines a 2008 T&C, doesn't look like this

• 
  @alyoungcuda10 күн бұрын

  How much different is it?

• 
  @dre9839 күн бұрын

  ​@alyoungcuda it's a sealed fan with no filter and a perforated upper portion. I did more research and apparently mine comes in all the trim levels that have an upper glove box.