Пікірлер

• 
  @Chrisinoxfordma2 ай бұрын

  I am totally impressed with your work!

• 
  @StarknightMT_official2 ай бұрын

  Hello, Are you interested in testing our products? We would like to invite you to test the Scratch-Resistant Windshield for your 2015 rzr xp 1000

• 
  @bastienmayne98975 ай бұрын

  Hello, I would like to know how this happens? What causes the breakage? Is it possible that it is the front axle that engages the 4wd while driving that causes the gearbox to break? Large-diameter tires?

• 
  @ernskii887 ай бұрын

  Thank you For the video tutorial. I feel confident in replacing the reverse chain in the transmission.

• 
  @jeffbruns721610 ай бұрын

  Could that be changed without taking it all the way apart?

• 
  @keagstand5099 Жыл бұрын

  How many hours to pull the tranny?

• 
  @anthonyvene2161 Жыл бұрын

  Is this a CV trans? I have an '18 xp 1000 turbo with a CV i have to yank. Thanks

• 
  @patrickkillilea5225 Жыл бұрын

  Awesome Bro! I got one of these to do tomorrow.

• 
  @ntoxic8edx Жыл бұрын

  Dangerous crap with no crossover collar.

• 
  @championjk Жыл бұрын

  this video was extremely helpful and well edited thank you!

• 
  @jakedehahn5475 Жыл бұрын

  Very good video!! What was the cause of the transmission malfunction? Do you happen to know? My transmission in my 16 1000 turbo has a lot of Play but I was told it was a Polaris thing 🤷 thousand miles still going strong but I'm always keeping an eye on the fluid making sure it's up to level. I also drive it like Grandma 😂 But that's why I'm curious on what happened to yours to begin with. Any info would be appreciated.

• 
  @christophergeorge8800 Жыл бұрын

  Love the oven. 1st Ive seen. A Masterpiece!! Cerakote Burnt Bronze Name. and NUMBER Please. thanks

• 
  @slagletoby2 жыл бұрын

  Good stuff and thank you for posting the vid. Very helpful 👍👍

• 
  @WldWillie682 жыл бұрын

  Thanks for the video.. Added to my favorites so I have it to help me do mine.. 👍

• 
  @jakedehahn54752 жыл бұрын

  So I'm trying to figure out what's going on with mine the CV shafts have a lot of play. at low speeds trying to take off. They like make a clanking noise but driving it's fine it's only when you first start to take off. Diff fluid 100%. seal is starting to weep a little bit even though previous owner replaced all that stuff lol. so I guess what I'm getting at. Is it possible that it could be the bearings and are those replaceable without complete disassembly?

• 
  @jakedehahn54752 жыл бұрын

  Or could it be the backlash? Could it possibly have gotten some play that way?

• 
  @alecjackson6632 жыл бұрын

  What's the park called tryna make a trip

• 
  @dougfrombergen39842 жыл бұрын

  Assuming this is the 110 hp model. How did it do climbing the mountain ? could you go straight up? or is 110 hp enough ?

• 
  @redrider5332 жыл бұрын

  good video

• 
  @IvanGarcia-pl1go2 жыл бұрын

  Do you have a link for the light I just got a RZR turbo S

• 
  @Farout3972 жыл бұрын

  03’s had no CAT right? I heard 2004.5 got CAT’s. Just bought a 2006 and it has one…

• 
  @levimckeen32982 жыл бұрын

  Awesome video! I'm about to do this Monday. The only question I have is what was the torq for the 14 bolts holding the case together

• 
  @acesegura06942 жыл бұрын

  I know it's probably too late, but 6mm bolts are 96inlb I think, would have to double check that thou

• 
  @dariopiazzano12 жыл бұрын

  Tanks!!! From argentina !!! No podíamos armar la selectora

• 
  @felixls61912 жыл бұрын

  I have a xp4 I hit the skid plate at the bottom it also hit that transmission gear box and it’s started to leaks in between is there a gasket that goes there?

• 
  @davidsgarage80622 жыл бұрын

  I remember back in the 90s a woman accidentally drove her snowmobile off those bluffs…. I think parts of the snowmobile are still at the bottom

• 
  @gunslingerfourtysix2 жыл бұрын

  G'day mate

• 
  @fireworks17272 жыл бұрын

  Great video minus the background music.

• 
  @fireworks17272 жыл бұрын

  Great video minus the background music...

• 
  @BuiltaOutdoors2 жыл бұрын

  Like a boss

• 
  @Thomas9988223 жыл бұрын

  What paint gun did you use?

• 
  @eddieshittie43683 жыл бұрын

  Now the transmission i'm working on the reverse chain grenaded and it busted the case that has the snorkel gear. But the one I'm on has a shift fork under the big output shaft planetary gear deal, (sry, not sure the names of the parts) The shift fork was also broken where a coil return spring sits and has a electronic solenoid that screws into the case to work the shift fork that's under the output shaft gears. Yours doesn't have that shift fork. My question is i don't think i have it put together correctly, Doesn't seem right that output shaft is just sitting on that shift fork. If this makes sense to you, i am at a loss. I did not do the tear down of this thing, it was brought to me in pieces and coffee cans with my friend hoping that i could tig weld the busted case. He must have assumed that i have a lord of the rings magic wand and a satchel full of sorcerer spells but i gave all that up in grade school. No way would that have held, the whole thing would have blown apart the second you put any kind of load on it so i said I would help only if he gets new parts that are broken, especially internal parts. So he got me a new case last week. This has been like a 3 month ordeal so far so god knows if i will get this back together. FML i should have said "sorry bro i don't know nothin bout nothin" "i am stupid, you should have taken it to someplace else, i hear they are the shit over there! fixing everything plus there is all these slutty 20's something women hanging out over there, they have beer and they don't wear any panties.... but u came here....." "dammit man, u messed up, well next time u will know, someplace else is where u gotta go, not here".....lol!

• 
  @eddieshittie43683 жыл бұрын

  shit....i have to watch this video of a street find. It came up in my video feed. a 1960 Packard Bell Television! Because that's gonna help in my endeavor getting this thing back together.

• 
  @alexissotelo42003 жыл бұрын

  Have you ever done a 2018 rzr turbo transmission. Are they the same

• 
  @ACSharkey3 жыл бұрын

  Good video, I feel like watching this once was decent enough to get through mine.

• 
  @BeaglerBassFishingOutdoors3 жыл бұрын

  Good vid buy who not change seals and reverse chain while you were in there?

• 
  @christianrobles75613 жыл бұрын

  Where you get the front brackets for mount the lights bro? That rzr have a really good looking in the night!

• 
  @Desertduleler_883 жыл бұрын

  That Burnt Bronze seems to be a close colour to the Honda OEM shade, great job.

• 
  @blackmetalchevy3 жыл бұрын

  Looks pretty simple straight forward! Im only scared on doing the backlash and finding the notch 🤔🤔

• 
  @slicedbacon28613 жыл бұрын

  I'm going to be installing the heavy-duty superATV reverse chain kit. So happy I don't have to worry about the, lash setting. Great video, very easy to follow. Thanks for posting...!!

• 
  @kevinbuteaux72453 жыл бұрын

  What year XP 1000 is that transmission off of? Thanks

• 
  @TheTaylor123213 жыл бұрын

  Did you change out bearings also? If so what’d you use to remove them?

• 
  @iveneverdonethisbefore83903 жыл бұрын

  Thanks for posting.

• 
  @landonlebouef33413 жыл бұрын

  what color should i call that

• 
  @landonlebouef33413 жыл бұрын

  what color would u call that?

• 
  @jamesbaldrey3 жыл бұрын

  Burnt bronze

• 
  @davidbarr96963 жыл бұрын

  Was that a 4oz bottle?

• 
  @josephmosser52033 жыл бұрын

  Is this trans and pull job similar or the same as 2015 Ranger 900XP? Going to have to go through mine soon, hopefully before it grenades and wrecks the case. I know my reverse chain is slipping or gears grinding

• 
  @tennesseecurtiss57413 жыл бұрын

  Back when you could still here your diesel even with a stock exhaust

• 
  @DezertBandito3 жыл бұрын

  How did you remove the snorkel shaft seal?

• 
  @donnburge97744 жыл бұрын

  volume sucks

• 
  @ianjohnson79624 жыл бұрын

  This video is still saving lives in 2020. I just finally got mine removed and on the floor. I sold my xp41k and 3 weeks later I think they broke the snorkel gear but not sure yet. Luckily didnt break the case. I can't in good conscience make the buyer eat the entire repair bill since I know I wasnt easy on the machine. Thanks so much for the time and patience making this video 👍

• 
  @bozkurt76734 жыл бұрын

  What is with the stupid music

• 
  @ridewot4 жыл бұрын

  GREAT VIDEO!!

• 
  @stephenbudnicki91264 жыл бұрын

  Did you use a particular paint gun?