Automotive tech for over 10 years , specialize in diesel pickup trucks but work on anything from a honda civic to pickup truck. Transparentness is best, if I make a mistake I want to show it so we all can learn from it. Everyone makes mistakes, especially me. Email: [email protected]
"As an Amazon Associate, I earn from qualifying purchases.”
Пікірлер
You can also take to back part of the switch off using a flathead and you can take the extra wires out that way without cutting them.
I'm about to hit 400k on my 2011 with the original CP4. I run Hot Shot's EDT in every tank (winter defense for the WI winters). This is one of the more pressing things I worry about on my truck. A lift pump and this valve are high on my list of upgrades.
Just used a dorman water pump pulley and my car overheated again so I pulled over and popped the hood the entire pulley shredded just cheap 3D printed plastic bs I have the old pulley in the box it’s 6 times heavier 😴😴💯💯
How or when would we know if this is about to happen? How can we check or know when to replace a turbo. I have a 2012 f250 6.7 with 340k stock turbo.
Seen same damn part for my car $90 at oreillys and found it Same thing $15 online
I have 0 knowledge about fixing or working on cars but your video made this very easy to understand and I’m eager to get to this tomorrow even though I was already ready to just pay to get this worked on. Thank you. Great job.
Great video!!! My only concern is that every five minutes or so more fins on the radiator are getting bent.
I replaced mine and the lights don't come off
Same thing I wonder. The connectors are the hardest part
is this the same for a 2011 flex?
SOLVED my U029E with "Exhaust Fluid Service" and "Reduced Speed". For the past month I have been working on this issue on my 2017 Silverado 2500HD LT 6.6L. Tonight I purchased my 3rd NOX2 (downstream) sensor and IMMEDIATELY EVERYTHING WAS FIXED. So, what happened? Why did the previous 2 NOX sensors NOT work? A clue came from GM Parts Direct as the original part number was listed as "DISCONTINUED". Previously we had purchased 2 numbers matching NOX2 sensors 12676706. So why did these sensors not work when the one see image below immediately worked? CHEVY! They programmed out part number 12676706 from the computer and programmed in 12718676. 12718676 CURED OUR U029E and "Exhaust Fluid Service" and "Reduced Speed" issues. Companies are still selling NOX2 part number 12676706 because it was the original device DO NOT PURCHASE THE DISCONTINUED NOX2 SENSOR 12676706. INSTEAD PURCHASE THE 12718676 PART NUMBER.
NTHSA says 20+ mile test drive.
SOLVED my U029E with "Exhaust Fluid Service" and "Reduced Speed". For the past month I have been working on this issue on my 2017 Silverado 2500HD LT 6.6L. Tonight I purchased my 3rd NOX2 (downstream) sensor and IMMEDIATELY EVERYTHING WAS FIXED. So, what happened? Why did the previous 2 NOX sensors NOT work? A clue came from GM Parts Direct as the original part number was listed as "DISCONTINUED". Previously we had purchased 2 numbers matching NOX2 sensors 12676706. So why did these sensors not work when the one see image below immediately worked? CHEVY! They programmed out part number 12676706 from the computer and programmed in 12718676. 12718676 CURED OUR U029E and "Exhaust Fluid Service" and "Reduced Speed" issues. Companies are still selling NOX2 part number 12676706 because it was the original device DO NOT PURCHASE THE DISCONTINUED NOX2 SENSOR 12676706. INSTEAD PURCHASE THE 12718676 PART NUMBER.
Do you know if this is the same for the 13-18 models?
2011 Ford Fiesta. Air conditioner has always been cold. I replaced the cabin air filter and since then the air condition blows cold as it use too but now fluctuates. Sometimes at a stop and even sometimes going down the highway at 60 mph. It can be 5-15 mins apart or longer?..
Is this the same for a 2013 cause that's what I searched up and only this video and 2011 show up ?
Kinda new to this, but what was the actual "Disaster" that was "Avoided"?
What is the part number?
If your looking for the lower pressure line. The part # is ( YF37255 )
I seen inside the truck man, I imagine the owner is a hoarder
And then there's the guy with the KZread handle "To God Be the Glory" criticizing the condition of a guys interior of a truck without even knowing his story. Are you going to go to church tomorrow, sit in your pew and judge the person next to you in the same way? Or are you going to choose to be a better and less judgemental Christian starting tomorrow? Don't get me wrong, I'm not one bit better than you... But I sure will try tomorrow.
Where is your shop located?
Try previewing your videos before uploading. You’re not in the frame as you describe things and point to what you describe.
I replaces the cabin air filter and pulled out some like foam, lint stuff when pulling it out. Put a new filter and it's making the sound
They shouldn’t sell a car with known issues however the Stealers don’t really care. Most people can’t hear those noise where as I hear noises immediately.
So just got a call from the dealer and they can’t find out why I am losing 2 to 3 gallons of fluid out of the reservoir bottle they are stumped everything was perfect they said when they pressure tested everything so it totally sucks I got 600 miles to drive home so bumbed out
try a flex extension for the Y bridge
if you do another LLY please edit the head replacement and torque into this video set ...if i was still in Riverside id have you do my LLY... looks like i may be stuck doing this nightmare myself... enjoy watching a total pro at work
good to see you're always conscious of keeping things clean
Making it look easy. Where is your shop?
my lb7 cooler has an external leak my fear is buying the part but not being able to complete the job,I know most shops dont like customer provided parts...in this scenario would you guys be able to bail me out if it was towed in?,best price I could find is from dales super store for 650 bucks...
hey pal...I found my cooler has an external leak last night right after your shop closed for the night,where in the world can I find a new one?I stayed up all night looking and they are all for 01 and up,mine is 03 lb7,only one I found is 1000 dollars.
You made this look way too easy…
Gwm steed 5
Gwm
Gwwm
What's the cost of this job with the saver in place vs. the $10k without?
Oh yeah, it looks easy 😂😂😂😂
Where do I find the link
Great video, i have a 2003 ford f250 5.4 and switch has never been replaced, i have a quest. about replacing the switch, i heard you say hope it doesnt leak, it that a concern with mine ? what if i put it back on quick ? and what happens if it did leak, have to replace all refrigerant ?
Part number ?
What’s the piece called that hose goes to
Get rid of
Could you have held the part number any further away?
My exhaust brake is weak but only after the truck is warmed up 2010 6.7 Cummins deleted would that back pressure sensor cause that? I just replaced the turbo because the actuator was gone
How do you pull the hose off ? I don’t want to mess it up worse
Can you give me the part numbers for the NOX sensors so I can order the same ones.?
What city in SoCal are you in?
thank you sir!!!! im pretty sure im missing a chromosome and even i changed it in about 30 mins.thank you, saved my bossman some cash
I have same code on my 2.7 ecoboost f150
If the part were the fuel return is lose on the injector. Is that bad. Do I need to replace the injector.
What type of pieces you putting on the power wrench?