I just purchased the 1/2 inch. Did a brake job and worked well. Quinn for win.
@Nigballs69graa27 күн бұрын
Im finna slide on you
@DUMPTHETRUCK27 күн бұрын
What does that mean
@Nigballs69graa27 күн бұрын
Lol ik exactly where that is bro
@m.t.v.7934Ай бұрын
Is it true that the old Pittsburgh Pro line is now the ICON line? I have no idea, I have just heard that around the inter-webs
@DUMPTHETRUCKАй бұрын
Icon is pretty much all new and Pittsburgh pro is still a thing, THATS the best I can tell ya. It might of been true years ago
@frankoleksiak2263Ай бұрын
Now this is a man who knows what he wants and makes it happen!
@devynj6924Ай бұрын
damn were is mine at you sob lmao
@MarcoH72Ай бұрын
Wow, they are mirror images of each other! 😂
@fredcloud9668Ай бұрын
You can't get the belt hook off ? You're kidding. You Know !!!
@ToycomaАй бұрын
Thank you Jon Goodman for this review.
@johnnythebeard420Ай бұрын
Watch your tools in the truck 😝
@DUMPTHETRUCKАй бұрын
Ya I park right in front of Giordanos pizza and I can see my truck from the roof and I got tons of rocks 🪨 on the roof ,,,lol
@johnnythebeard420Ай бұрын
@@DUMPTHETRUCK 😂
@Nathan-ce5bdАй бұрын
Love your ruff videos hippie
@donlockhart2587Ай бұрын
Great video, love the non biased honesty with it, i picked one up cause as a guy who isnt huge into multi tools, im not spending 120 on a wave, it seems like a good deal, thankfully mine seems to have actually passed QC, but time will tell.
@nightshadefern162Ай бұрын
I bought one, really liked it and discovered a major flaw- the pliers end has either a terrible casting or some sort of braising in it, right at the point of stress. It blew out and snapped one of the pliers prong off. Inside, there is flaky brass powder. This tool went from being a 9/10 to a 1/10. I was not abusing it, light general use. HF says that there is a lifetime warranty, but I doubt I will try another. Sad to say: its poorly made, despite the rest of the tool being damn good.
@aljohnson2439Ай бұрын
Will get 1 to put in Cart. Where did you get the storage blue box?
@DUMPTHETRUCKАй бұрын
They sell them at harbor freight. They come in 3 sizes made of silicone and they don’t slide around
@carltondoorman9145Ай бұрын
My problem with this knife is the philips screwdriver, which is not held in place securely. There's a tiny magnet, which is all that holds it. You can count on it getting lost pretty quickly.
@Lifespot-ep7vrАй бұрын
that glass is half empty vibe fosho
@matthewtaylor4983Ай бұрын
Man you just drew the short straw unfortunately and got one that got through quality control or something and was damaged because I bought one the other day and I love it it almost does a better job of being a Leatherman Wave than a Leatherman Wave does and I agree with you they're not going to keep these on the shelf it's going to be like that icon knife that harbor freight can't keep in stock. They would have been smart to order a whole box full for every store rather three or four. This for the video.
@DUMPTHETRUCKАй бұрын
Ya I know but I didn’t want to hide that mine came broken, I switched it out and the new one is great,,,icon is coming out with a new knife soon
@DUMPTHETRUCKАй бұрын
Ya I know but I didn’t want to hide that mine came broken, I switched it out and the new one is great,,,icon is coming out with a new knife soon
@outdoor044Ай бұрын
What kinda of new knife? A flipper style like the one that's really popular now? I wish they'd make a Leatherman surge clone. @@DUMPTHETRUCK
@DavidMiller-kv4weАй бұрын
Wait... you're doing a video like this and you don't know what a "bellow" is?
@DUMPTHETRUCKАй бұрын
Sorry Biden Boy I thought you didn’t have to be woke to make a KZread video in the USA, I usually use gas instead blowing little tubes
@DavidMiller-kv4weАй бұрын
@@DUMPTHETRUCK Man, I had no idea you'd get so triggered. hahaha Bah, regardless of that I'm still gonna sub. Lovin' the videos I've checked out so far. :)
@samuelyoung9932Ай бұрын
Thanks for your honest sharing. I m also a harbor freight tool guy. Gordon should do a better job to modified what people really want. Harbor Freight has the best distribution network. 👍👍👍👍👍
@DUMPTHETRUCKАй бұрын
You bet
@oldcrowcornholeАй бұрын
Mine works perfectly fine. I have had several multi-tools. Mostly Leatherman and Gerber. The Gordon isn't as good quality as Leatherman buy it's also 1/3 the price. But I will say this tool is better than the $70 Gerber Multi-Tool I have.
@dennisbailey9442Ай бұрын
This is a really great tool and has many upgrades from the Leatherman Wave +. It sounds like this guy has problems with everything he gets.
@DUMPTHETRUCKАй бұрын
So you wanted me to hide that it was broken out the package and tell you it’s great with no problems
@billybunter375327 күн бұрын
"Upgrades" 😂😂😂
@BUCKSHOTSTVАй бұрын
Getting rid of a flat head would be a stupid ass idea. I constantly run into flat heads when I’m out doing things. Not having a flat head available can turn a quick job into I gotta run to the damn store and buy a flat head because someone decided to stop adding them to their tools lol. I just went to HF to buy more flat heads because I never have them available
@leo.girardiАй бұрын
Dude, 30 min video? Not like I got a six pack and popcorn to watch Seinfeld in the 90's. Really...
@tomperone9338Ай бұрын
No problems with mine!
@DUMPTHETRUCKАй бұрын
I’m sure mine was a fluke but I didn’t think it was right to not show the problems with mine. I got a new one and it seems fine
@jetta61Ай бұрын
I love HF!
@thisfishsmellsgood4084Ай бұрын
This guy is a complete idiot. He has no idea what he is doing. He's way out of his depth.... He doesn't even know anything about steel. It's sad I'm halfway through and I'm just turning it off.
@DUMPTHETRUCKАй бұрын
Where is your video
@rico300zxАй бұрын
Not bad !
@mannihh5274Ай бұрын
The price is less than 1/3 of the original Wave, do you really exspect a better quality? Your tool is faulty, return it and get another one. The bit driver has two advantages (for Leatherman- lol) a) it gives room for another tool, b) it gives opportunity to sell extremely overpriced special bits, bit-sets and extensions. I discovered, they just took regular 1/4"-bits and made them flat, so I bought a cheap locking bit-driver, cut it short underneath the notch, ground it flat to fit the holder and added a hole matching the gap in the holder - now I can put in a pin and have a 100% locked-in-place driver for any regular bit on the market for around 7$ and one hour of 'elbow grease'. This add-on fits right inside one of the elastic side loops of the sheath. BTW: a) the bits are in HEXAGON-shape (=6 corners) not octagon (=8 corners) b) should be common knowledge that 'stainless steel' is a marketing gag, ALL steels will start to rust over time, the 'stainless' ones significantly later than carbon steel. Some special steels need some 100 years in seawater to show rust. Contents of chrome(Cr), vanadium(V), nickel(Ni), molybdanium(Mo) and others help increasing their 'stainless' time, but reduce the hardness, so manufacturers choose low contents on certain tools like Philips drivers. This is why 'stainless' tools need some maintenance too - your old Leatherman is in quite bad shape - remember: your sweat is salty water, so wipe the tools down with a small rag, drenched in gun-oil
@DUMPTHETRUCKАй бұрын
I thought I'd get alot more comments over the hexagon octagon thing but you were the only one.
@clydedoris5002Ай бұрын
A little rust doesn't hurt
@patrickriarchy6054Ай бұрын
Are they as well made as a Wave?. Of course not. Is it terrible?. No. I've seen reviews saying to just get a Gerber multitool instead since some of their multitools are comparatively priced. Those people must be stuck in the past because IMO entry-level Gerber multitools are even worse than this.
@williamkious5349Ай бұрын
Gerber has become junk outside of their more expensive offerings.
@patrickriarchy6054Ай бұрын
@@williamkious5349 Agreed .Gerber used to be quality up until the 90s the only things worth a sht now are the Strongarm and their $100+ multitools but at that price why not just get a Leatherman or Victorinox?.
@neal6473Ай бұрын
It's a great tool I bought one two days ago and I give it a A+.
@1ohmwreckerАй бұрын
Im not a multitool person either but i want one lol. Theyre only worth $25 to me tops tho. 🤷♂️
@VWKID61Ай бұрын
It’s stain less not stain proof minimal oiling to maintain rust resistance. 👍🏼 also you press the lock bar to take the clip off
@DUMPTHETRUCKАй бұрын
Ya I figured out the pocket clip after the video thanks for the view
@VapnFaganАй бұрын
FIRST!
@DUMPTHETRUCKАй бұрын
THANKYOU to our leader
@vidsofyermomАй бұрын
@@DUMPTHETRUCK He just wanted to beat me to it.
@rico300zxАй бұрын
Nice stuff
@johnnythebeard420Ай бұрын
Looks good doing some rib tips tomorrow on a Weber kettle
@spencermorrow2899Ай бұрын
Icon is shit
@KevinCook3702 ай бұрын
Why rebuild? You wanted a new one any way.
@vidsofyermom2 ай бұрын
Hawt roofz
@milwaukee_692 ай бұрын
I have the electricians pliers and they work great.
@aubreyleonae41082 ай бұрын
1/4 inch spinner handle is great though I prefer to use a smaller one if the extension isn't needed.
@kobewilson6402 ай бұрын
I was not super impressed by the 1/4 in driver, but after seeing the back end and realizing that you can put it on a ratchet... thats pretty nice👌 I kinda want one
@chrisoller30972 ай бұрын
The stubby flex head ratchet is made in Tiwan. It was made for Craftsman by Stanley. They are known as the tri wing ratches.
@warrenblanchard8892 ай бұрын
Nice little haul
@vidsofyermom2 ай бұрын
I wish we had Harbor Freight in Canada. Good video Happy!
@DUMPTHETRUCK2 ай бұрын
Maybe one day! Thanks bro
@empiesidbury15732 ай бұрын
You are passing along a lot of inaccurate information. Sk sold to greatnstar summer of 2922, they have a line of prosumer tools in china and the pro line of sockets and the LP90 ratchet you showed on the usa, that same ratchet is rebadged and made for olsa tool. They would be very stupid to end the usa line of sockets because they are so good not many notches below a snap on sockets. Truth be told that is the best thing they ever had to offer. I always heard the old timers refer to sk as the socket company. The wrenches we good as far as tolerances and they were very hard and strong. A sk .wrenches never splayed the open end they just broke the open end off of one side but the wrenches were jist to short. They did make a long pattern for a while toward the end. I have been working on building a set of sae for 4 years. They didn't market them to well and they are ,rare to find in eBay and very pricey and were new as well. They are t about to sell they have sold and moved the factory to the shop vac factory over the past couple of years excuse all of my typos and mistakes my screen is messed up then out correct make wrong words I have been trying to type this for over 15 mins and I just am done with correcting the mistakes with the expectation people will read between the lines I just don't care if people make.fum of m me for the mistakes and my patience are done with it now
@DUMPTHETRUCK2 ай бұрын
Nobody knows for sure what’s going on with SK but what I would say by what I see is the web site is sold out of a lot of the USA ratchets and they either shut down production of them or have two guys making them since I can’t see tons of these being sold with the new shop vac plant pumping them out…For us as consumers we won’t know the truth probably for years, It’s sad to see these tools 🛠️ being made over sea’s but you know it will happen,,,So I’m not a pro so I don’t need snap on so HFT it is for me now craftsman is not good to me,,THATS all get r done
@kobewilson6402 ай бұрын
I actually have that 18 in matco ratchet you're talking about! I bought it with a student discount for 120 and that's still too much money. It's my baby, and I use it all the time, but if i need another one for any reason, this is what I'm doing.
Пікірлер
What % alcohol do you think it will be ?
Between 6&7%
❤❤❤
Thank you
I just purchased the 1/2 inch. Did a brake job and worked well. Quinn for win.
Im finna slide on you
What does that mean
Lol ik exactly where that is bro
Is it true that the old Pittsburgh Pro line is now the ICON line? I have no idea, I have just heard that around the inter-webs
Icon is pretty much all new and Pittsburgh pro is still a thing, THATS the best I can tell ya. It might of been true years ago
Now this is a man who knows what he wants and makes it happen!
damn were is mine at you sob lmao
Wow, they are mirror images of each other! 😂
You can't get the belt hook off ? You're kidding. You Know !!!
Thank you Jon Goodman for this review.
Watch your tools in the truck 😝
Ya I park right in front of Giordanos pizza and I can see my truck from the roof and I got tons of rocks 🪨 on the roof ,,,lol
@@DUMPTHETRUCK 😂
Love your ruff videos hippie
Great video, love the non biased honesty with it, i picked one up cause as a guy who isnt huge into multi tools, im not spending 120 on a wave, it seems like a good deal, thankfully mine seems to have actually passed QC, but time will tell.
I bought one, really liked it and discovered a major flaw- the pliers end has either a terrible casting or some sort of braising in it, right at the point of stress. It blew out and snapped one of the pliers prong off. Inside, there is flaky brass powder. This tool went from being a 9/10 to a 1/10. I was not abusing it, light general use. HF says that there is a lifetime warranty, but I doubt I will try another. Sad to say: its poorly made, despite the rest of the tool being damn good.
Will get 1 to put in Cart. Where did you get the storage blue box?
They sell them at harbor freight. They come in 3 sizes made of silicone and they don’t slide around
My problem with this knife is the philips screwdriver, which is not held in place securely. There's a tiny magnet, which is all that holds it. You can count on it getting lost pretty quickly.
that glass is half empty vibe fosho
Man you just drew the short straw unfortunately and got one that got through quality control or something and was damaged because I bought one the other day and I love it it almost does a better job of being a Leatherman Wave than a Leatherman Wave does and I agree with you they're not going to keep these on the shelf it's going to be like that icon knife that harbor freight can't keep in stock. They would have been smart to order a whole box full for every store rather three or four. This for the video.
Ya I know but I didn’t want to hide that mine came broken, I switched it out and the new one is great,,,icon is coming out with a new knife soon
Ya I know but I didn’t want to hide that mine came broken, I switched it out and the new one is great,,,icon is coming out with a new knife soon
What kinda of new knife? A flipper style like the one that's really popular now? I wish they'd make a Leatherman surge clone. @@DUMPTHETRUCK
Wait... you're doing a video like this and you don't know what a "bellow" is?
Sorry Biden Boy I thought you didn’t have to be woke to make a KZread video in the USA, I usually use gas instead blowing little tubes
@@DUMPTHETRUCK Man, I had no idea you'd get so triggered. hahaha Bah, regardless of that I'm still gonna sub. Lovin' the videos I've checked out so far. :)
Thanks for your honest sharing. I m also a harbor freight tool guy. Gordon should do a better job to modified what people really want. Harbor Freight has the best distribution network. 👍👍👍👍👍
You bet
Mine works perfectly fine. I have had several multi-tools. Mostly Leatherman and Gerber. The Gordon isn't as good quality as Leatherman buy it's also 1/3 the price. But I will say this tool is better than the $70 Gerber Multi-Tool I have.
This is a really great tool and has many upgrades from the Leatherman Wave +. It sounds like this guy has problems with everything he gets.
So you wanted me to hide that it was broken out the package and tell you it’s great with no problems
"Upgrades" 😂😂😂
Getting rid of a flat head would be a stupid ass idea. I constantly run into flat heads when I’m out doing things. Not having a flat head available can turn a quick job into I gotta run to the damn store and buy a flat head because someone decided to stop adding them to their tools lol. I just went to HF to buy more flat heads because I never have them available
Dude, 30 min video? Not like I got a six pack and popcorn to watch Seinfeld in the 90's. Really...
No problems with mine!
I’m sure mine was a fluke but I didn’t think it was right to not show the problems with mine. I got a new one and it seems fine
I love HF!
This guy is a complete idiot. He has no idea what he is doing. He's way out of his depth.... He doesn't even know anything about steel. It's sad I'm halfway through and I'm just turning it off.
Where is your video
Not bad !
The price is less than 1/3 of the original Wave, do you really exspect a better quality? Your tool is faulty, return it and get another one. The bit driver has two advantages (for Leatherman- lol) a) it gives room for another tool, b) it gives opportunity to sell extremely overpriced special bits, bit-sets and extensions. I discovered, they just took regular 1/4"-bits and made them flat, so I bought a cheap locking bit-driver, cut it short underneath the notch, ground it flat to fit the holder and added a hole matching the gap in the holder - now I can put in a pin and have a 100% locked-in-place driver for any regular bit on the market for around 7$ and one hour of 'elbow grease'. This add-on fits right inside one of the elastic side loops of the sheath. BTW: a) the bits are in HEXAGON-shape (=6 corners) not octagon (=8 corners) b) should be common knowledge that 'stainless steel' is a marketing gag, ALL steels will start to rust over time, the 'stainless' ones significantly later than carbon steel. Some special steels need some 100 years in seawater to show rust. Contents of chrome(Cr), vanadium(V), nickel(Ni), molybdanium(Mo) and others help increasing their 'stainless' time, but reduce the hardness, so manufacturers choose low contents on certain tools like Philips drivers. This is why 'stainless' tools need some maintenance too - your old Leatherman is in quite bad shape - remember: your sweat is salty water, so wipe the tools down with a small rag, drenched in gun-oil
I thought I'd get alot more comments over the hexagon octagon thing but you were the only one.
A little rust doesn't hurt
Are they as well made as a Wave?. Of course not. Is it terrible?. No. I've seen reviews saying to just get a Gerber multitool instead since some of their multitools are comparatively priced. Those people must be stuck in the past because IMO entry-level Gerber multitools are even worse than this.
Gerber has become junk outside of their more expensive offerings.
@@williamkious5349 Agreed .Gerber used to be quality up until the 90s the only things worth a sht now are the Strongarm and their $100+ multitools but at that price why not just get a Leatherman or Victorinox?.
It's a great tool I bought one two days ago and I give it a A+.
Im not a multitool person either but i want one lol. Theyre only worth $25 to me tops tho. 🤷♂️
It’s stain less not stain proof minimal oiling to maintain rust resistance. 👍🏼 also you press the lock bar to take the clip off
Ya I figured out the pocket clip after the video thanks for the view
FIRST!
THANKYOU to our leader
@@DUMPTHETRUCK He just wanted to beat me to it.
Nice stuff
Looks good doing some rib tips tomorrow on a Weber kettle
Icon is shit
Why rebuild? You wanted a new one any way.
Hawt roofz
I have the electricians pliers and they work great.
1/4 inch spinner handle is great though I prefer to use a smaller one if the extension isn't needed.
I was not super impressed by the 1/4 in driver, but after seeing the back end and realizing that you can put it on a ratchet... thats pretty nice👌 I kinda want one
The stubby flex head ratchet is made in Tiwan. It was made for Craftsman by Stanley. They are known as the tri wing ratches.
Nice little haul
I wish we had Harbor Freight in Canada. Good video Happy!
Maybe one day! Thanks bro
You are passing along a lot of inaccurate information. Sk sold to greatnstar summer of 2922, they have a line of prosumer tools in china and the pro line of sockets and the LP90 ratchet you showed on the usa, that same ratchet is rebadged and made for olsa tool. They would be very stupid to end the usa line of sockets because they are so good not many notches below a snap on sockets. Truth be told that is the best thing they ever had to offer. I always heard the old timers refer to sk as the socket company. The wrenches we good as far as tolerances and they were very hard and strong. A sk .wrenches never splayed the open end they just broke the open end off of one side but the wrenches were jist to short. They did make a long pattern for a while toward the end. I have been working on building a set of sae for 4 years. They didn't market them to well and they are ,rare to find in eBay and very pricey and were new as well. They are t about to sell they have sold and moved the factory to the shop vac factory over the past couple of years excuse all of my typos and mistakes my screen is messed up then out correct make wrong words I have been trying to type this for over 15 mins and I just am done with correcting the mistakes with the expectation people will read between the lines I just don't care if people make.fum of m me for the mistakes and my patience are done with it now
Nobody knows for sure what’s going on with SK but what I would say by what I see is the web site is sold out of a lot of the USA ratchets and they either shut down production of them or have two guys making them since I can’t see tons of these being sold with the new shop vac plant pumping them out…For us as consumers we won’t know the truth probably for years, It’s sad to see these tools 🛠️ being made over sea’s but you know it will happen,,,So I’m not a pro so I don’t need snap on so HFT it is for me now craftsman is not good to me,,THATS all get r done
I actually have that 18 in matco ratchet you're talking about! I bought it with a student discount for 120 and that's still too much money. It's my baby, and I use it all the time, but if i need another one for any reason, this is what I'm doing.