Пікірлер

• 
  @mekeroz13 күн бұрын

  wheels ?which brand ?

• 
  @matthiasstrigl7103Ай бұрын

  What wheels are this? Thx

• 
  @were562Ай бұрын

  exhaust?

• 
  @shabwonАй бұрын

  Amazing looking rear lights, I would be interested in how you converted them too .

• 
  @FakeM2xx4 ай бұрын

  Great vid how’s the build now?

• 
  @packtech6 ай бұрын

  Yes, but WHY???? It is a Maserati, NOT a F**king Ferrari... Why the Ferrari logo on the Steering wheel?.. I dunno, up to you I suppose. As my father used to say, there's no accounting for taste.

• 
  @andrewf80_6 ай бұрын

  You sound like a jabroni going around quoting "my father, my father" Based on that alone, I feel bad as its probably not your fault. Before you think too much and hurt your pea-brain, the key and steering wheel have Maserati trident badges now, I know thats not what you wanted to hear but, you can let your daddy know. I really hope you are some goofy European dude, no red blooded American would spend a Saturday morning commenting this. Go back to your hole you troll.

• 
  @erikgreer86786 ай бұрын

  *promo sm*

• 
  @realchattv438910 ай бұрын

  Maaan if I could have that sound on acceleration but stock burbles when I flip down , no fireworks

• 
  @andrewf80_7 ай бұрын

  That was stock m235 burbles no flash tune. Just need an m2 muffler and a downpipe for sound. You probably can turn all over run off, thats what I have done with my f80

• 
  @Top_g80comp Жыл бұрын

  Car looks fantastic 🤘🏻💯

• 
  @TonySayavong2 жыл бұрын

  Do you know what your whp was looking like with those bo

• 
  @andrewf80_2 жыл бұрын

  Last time I dyno'd the car it made 382whp with a few gallons of e85 and on a mustang dyno which usually read low, sold the car about 3 years ago! It was a great car to me, had a few low 12 second passes and never any issues

• 
  @user-rl6ec1zc4i2 жыл бұрын

  Dude, just a small question, does the valve open\close by putting into sport and comfort? Or the valve doesn't work? Plus, does the pops came with the exhaust once you put it on or you have to coding to make those pops?

• 
  @andrewf80_2 жыл бұрын

  Hey hows it going, No coding, the pops did increase a little from JB4 but the biggest difference is the catless downpipe. I believe other n55s need coding but the m235i had burble stock, as for the valve I've played with a few methods in sport + it does open and stay open most of the time but definitely closed in comfort unless full throttle, if you want it always open for free you can just turn the car off when the valve is open and disconnect the valve. Jb4 does offer open and close operation with the BC button but sometimes its hard to tell or changes when you don't want.

• 
  @romasigor2 жыл бұрын

  Looks nice. What have you done to make it orange?

• 
  @andrewf80_2 жыл бұрын

  Thanks, European spec tail lights have orange blinkers

• 
  @ethankim21422 жыл бұрын

  I'm assuming that can be fitted to the m235i

• 
  @metalgearbas42 жыл бұрын

  You assume correct, check ThicWhip's video on the conversion, it's a bit of work, but nothing too complex.

• 
  @andrewf80_8 ай бұрын

  Late reply but if anyone wants to know, this video is of a 2015 m235i

• 
  @catalin.c2 жыл бұрын

  Why did u said “dont overtighten” on the last clamp tho?

• 
  @andrewf80_2 жыл бұрын

  If you tighten the clamp too much it deforms the plastic. It would no longer be a circle and not make an air tight seal, potential leak past the maf.

• 
  @60thirty223 жыл бұрын

  What’s the difference between this and the m performance exhaust on a m235i

• 
  @andrewf80_3 жыл бұрын

  The main difference for me was the Cost, I found an m2 muffler for $200 and it cost $80 to have the exhaust exits converted, M performance is 3-4x the price. Sound and volume wise its pretty much the same!

• 
  @miguela78153 жыл бұрын

  This isn't an m2 exhaust...... wheres the quad tips bud?

• 
  @andrewf80_3 жыл бұрын

  They were cut off... and made into dual exhaust bud

• 
  @jeandandrea67573 жыл бұрын

  suspension and spacer specs?

• 
  @andrewf80_3 жыл бұрын

  H&R Sport Springs & No spacers Wheels were 19x8.5 et35 & 19x9.5 et40 rear rubbed with michelin pilot super sports 255/30s, 255s may not rub with if a tire that runs more narrow, 245/30s ended it up being perfect no rubbing, but I perfered the look of the 255s, a little camber adjustment would have resolved any rubbing

• 
  @jeandandrea67573 жыл бұрын

  @@andrewf80_ So i just ordered 18x8's for my 230i, what would you reccomend for great fitment and no rubbing? would coilovers and spacers do the trick?

• 
  @andrewf80_3 жыл бұрын

  @@jeandandrea6757 It really depends on the offset, do you know the offset of the wheels? I also ran 19x8.5 et35 square (front & rear) but staggered tires 225/35 245/30 , 19x8.5 et35 was pretty much perfectly flush to create that fitment a 18x8 would need to have an offset of et28, whatever the offset of the wheels are if you minus 28 from that number what you're left with will be the spacer size youd need to create that width. Suspesion wise you would only need H&R springs to get pretty much perfect height wise - I do have some other pictures of my M235i on my instgram @andrewf80_ if you want to see some of the other wheel setups I ran

• 
  @jeandandrea67573 жыл бұрын

  @@andrewf80_ The offset of the wheels are 40mm

• 
  @andrewf80_3 жыл бұрын

  @@jeandandrea6757 12mm spacers would make 18x8 et40 wheels = 19x8.5 et35 width wise and would make them pretty much perfectly spaced, 10mm would be fine too a little less agressive but 2mm doesnt make that much of a difference

• 
  @trihardcx67433 жыл бұрын

  Does the M2 normally rev that high?

• 
  @RossMetzler3 жыл бұрын

  Limited-slip dif?

• 
  @andrewf80_3 жыл бұрын

  Yes, M Performance LSD

• 
  @charlesstoddard82544 жыл бұрын

  Any issues with error codes or anything like that?

• 
  @IronMannara4 жыл бұрын

  This is with catless downpipes and muffler delete? It doesn't sound too loud in the cab at all

• 
  @andrewf80_4 жыл бұрын

  No It was with an OEM M2 exhaust and catless downpipe, pretty tame in the cabin but still loud behind

• 
  @antidoteworld96094 жыл бұрын

  does your car have a limited slip?

• 
  @lokess0014 жыл бұрын

  hi, Andrew How would you go about removing the center armrest Leather trim . so far I have managed to remove the lead from the main assembly as per your video instructions but can’t seem to remove the actual lead the leather is glued to . Thank you Loke

• 
  @arjunbudwal12725 жыл бұрын

  Sounds brilliant!

• 
  @RasoulMojtahedzadeh5 жыл бұрын

  Is the pinout of the connector available?

• 
  @StablematesAutomotive5 жыл бұрын

  Watch every video out there and still Can't get enough of it

• 
  @SLIXK_M45 жыл бұрын

  You can use m2 exhausts on the m2358?

• 
  @SLIXK_M45 жыл бұрын

  M235i*

• 
  @vahlv Жыл бұрын

  @@SLIXK_M4 no

• 
  @andrewf80_7 ай бұрын

  4 years late but Yes, if you modify the diffuser you can leave it quad exhaust, The right way to do it would be cutting the quad off and putting dual on the m2 muffler. Anyone who reads this its easy

• 
  @SLIXK_M47 ай бұрын

  @@andrewf80_ 4 years later I got my Dream M4! Thank you though 🤘🏼 will help anyone else in the market for the exhaust of the m235i .

• 
  @andrewf80_7 ай бұрын

  Lets gooo! I have an f80 now, but still loved my m235i. I just didn't want to leave the "no" comment under yours incase someone needed that info! @@SLIXK_M4

• 
  @Sean-zj7mg5 жыл бұрын

  Yeah I was thinking about going big alternator on my supercharged yaris. Probably gonna have to build the radio before I do anything though. A lot of people are blowing their motors with my set up because they kept the stock one. I'm probably looking at 11's next track day just gotta finish adding the stickers to the back window.

• 
  @Shogun19825 жыл бұрын

  Hey, I find the armrest pad a bit too thick and high. I often lift the armrest lid just to get it out of the way of my elbow (I dunno , maybe I just have freakishly long arms or something). Do you know of any armrest versions out there that are low profile? I'd even be willing to give up the extend/retract feature on the armrest. Thanks either way.

• 
  @kristoffswinoga836 жыл бұрын

  You got an IG page so I can see more pictures with them rims?

• 
  @shadozE106 жыл бұрын

  How did you do the burble tune

• 
  @wontgetright87316 жыл бұрын

  Looks great. Do you have an Instagram?

• 
  @harriswatkins65356 жыл бұрын

  Do you know if this would work on a sportline wheel?

• 
  @andrewf80_6 жыл бұрын

  Yes they work with sport line wheel as well , If your interested here is the link to them for sale www.ebay.com/itm/123016530982 Let me know if you need any help

• 
  @bamboojelo38976 жыл бұрын

  Are all m240i 2018 LCIs?

• 
  @DonJpvallee1876 жыл бұрын

  You can always use something sticky and just pull it out much easier

• 
  @andrewf80_6 жыл бұрын

  Maybe I will make a video showing that method or a video showing both :()

• 
  @scottw11746 жыл бұрын

  Instructions were easy to understand, did the job in minutes

• 
  @richtofenillingroth6416 жыл бұрын

  Thank you! I was curious, as I'm planning this upgrade too!

• 
  @andrewf80_6 жыл бұрын

  Glad I Could Help!

• 
  @neoFuzz16 жыл бұрын

  How did you get the burbles so loud !! Sounds awesome

• 
  @JamesCF106 жыл бұрын

  How the hell do I do this in my car!?

• 
  @andrewf80_6 жыл бұрын

  Activating launch control (really its just tire smoke mode) Just subscribed to your channel car looks great BTW!

• 
  @theaman2016 жыл бұрын

  Looks nice!!

• 
  @theaman2016 жыл бұрын

  Yaaa this es a vury germUn vedio

• 
  @northener996 жыл бұрын

  Nice. Thinking of doing the same to my M235i. Big improvement over the stock exhaust? Any cabin drone? I'd be mating it to a catted DP so would love to hear your thoughts. Cheers!

• 
  @andrewf80_6 жыл бұрын

  Thanks , And yes huge improvement over stock exhaust , I mounted the stock exhaust back up before having the m2 muffler modified into dual and its crazy how quite the stock system is even with a Catless downpipe , And drone is pretty much the same as stock I made a video to show if there was any drone and the camera actually amplified the sound a bit because it was trying to pick up something, Active sound (which I have off) and the stock Michelins make more in cabin sound at cruising check out this video , plus I have other videos of the exhaust under load that give a better idea kzread.info/dash/bejne/epN-x8SgpMq2ZqQ.html Im on bimmerpost under the same name if you have any questions feel free to shoot me a PM

• 
  @northener996 жыл бұрын

  That's awesome. Thanks for the clarification. It's been such quest to figure out what to do to improve the sound of the car without spending serious cash. I think I'll give it a whirl. And thanks, I'll ping you on bimmerpost if I have any more questions. Cheers!

• 
  @GaryChen6 жыл бұрын

  did you buy a BOV with the vrsf charge pipe?

• 
  @andrewf80_6 жыл бұрын

  No just the charge pipe, the n55s diverter valve is attached to the turbo housing so running BOV on stock turbo is either impossible or unnecessary. Motors like the n54 are where people upgrade BOVs attached to the charge pipe

• 
  @GaryChen6 жыл бұрын

  Thanks so much! Besides upgrading the chargepipe, do i need to upgrade anything else so i can handle stage 2 jb4?

• 
  @EduardoSanchez-gc2xr6 жыл бұрын

  veeerrrgaaa que chingon estaaa y que duro corre

• 
  @jerrychen91677 жыл бұрын

  straight pipe?

• 
  @andrewf80_6 жыл бұрын

  at this point was just 4" catless downpipe full stock exhaust , I am now running factory m2 exhaust with catless downpipe much louder and aggressive , will be posting A video shortly

• 
  @xDeFt7 жыл бұрын

  what wheels?

• 
  @andrewf80_7 жыл бұрын

  Rotiform RSEs

• 
  @eloneatmyshorts6 жыл бұрын

  Anderw 18 or 19s? I'm assuming lowered? They look great!

• 
  @emal19757 жыл бұрын

  Did you code out or bypass ASD?

• 
  @andrewf80_7 жыл бұрын

  I am using the JB4 to delete ASD, if you didn't want use a JB4 you can also use BMSs OBDII Can flap module , or a ASD delete harness

• 
  @emal19757 жыл бұрын

  I got and installed a technic pnp harness that works perfectly. I don't have a JB4, and didn't know it would delete it. I was just curious cuz I couldn't tell from your vid. Sounds great tho.

• 
  @andrewf80_7 жыл бұрын

  I would have probably gone the harness route if there were no other options , JB4 offers a few good feature besides the tune itself , boost gauge and CEL delete when running catless a downpipe is what sold me mostly & Thank you! I need to get sound clips from outside the car its hard to capture the sound on video compared to in person

• 
  @JournalismRS7 жыл бұрын

  Looks like fort myers.

• 
  @andrewf80_6 жыл бұрын

  You'd be right it is Ft Myers lol

• 
  @tater12106 жыл бұрын

  Ha, was just watching this thinking the same thing! Car sounds great, hope to see it around sometime!

• 
  @xXeFilmsXx7 жыл бұрын

  is that the "gunshot" tune or normal burble tune

• 
  @xXeFilmsXx7 жыл бұрын

  oh lmao just read title

• 
  @CyberdyneProductions7 жыл бұрын

  Have a 2014 looking to do an ER Catless Downpipe and BMS JB4. I have 35k miles on the clock on mine, have you experienced any reliability issues with your mods? Also your car seems to pop a shit ton I love it! Is that just a result of the catless DP?

• 
  @andrewf80_7 жыл бұрын

  Thanks man The car popping is from the factory tuned Over Revs but are definitely louder and more aggressive from the combination of Being Catless, The tune and intake add to it. I have 33k miles on my car now and have been running these mods for over 10k miles and haven't had any issues. Seems to be just as reliable as stock would be , I would go ahead and do it completely changes the car in a good way you'll wish you did it earlier much more enjoyable between the extra power and sound

• 
  @CyberdyneProductions7 жыл бұрын

  Awesome to hear man thank you! Installing the JB4 + ER Catless Downpipe + GFB DV+ this weekend now that they're arriving in bits. Hope I have the same results.