This is not a maximum, it's a MAXIM. GRAMMAR must be learned. Regards.
@FordZda14 күн бұрын
Did you ever swap the bars? I never liked the goose neck on mine i went for a set of flat bars immediately
@eddiexploresАй бұрын
Love how these have a more sporty sound!!
@buzisbuilds465725 күн бұрын
Me too lol
@JonFTCАй бұрын
that S550 looks sick!
@tonyvee2082 ай бұрын
Pretty sure I saw your car on the freeway on Sunday? I was on the 91 or the 5 freeway heading towards Huntington. Am I trippin? I pulled up next to you in a black on black mustang GT. Or am I trippin? Lol
@buzisbuilds46572 ай бұрын
lol, you trippin bro!
@Tshirtguy20202 ай бұрын
Camera is too shaky to figure out what is going on.
@legistermusic73422 ай бұрын
Just subscribed...
@legistermusic73422 ай бұрын
Bless up from 🇯🇲
@SayNasty665 ай бұрын
🔥🔥
@buzisbuilds46575 ай бұрын
Thanks bro
@JoeRocket-sf6qs5 ай бұрын
Omg im dying here,my bike is in my front alcove waiting for summer to come, 4 months from now I will hear this sound again.I hate winter.mine is a 1985 700, sounds the same.
@buzisbuilds46575 ай бұрын
Patiently waiting over here
@connor1587 ай бұрын
hows drone?
@buzisbuilds46576 ай бұрын
Not bad, sounds really good
@bernardovazquez309810 ай бұрын
🔴 AWESOME SOUND THANK YOU FOR THIS VIDEO 🙋♂️👍👍👍👍👍
@buzisbuilds465710 ай бұрын
You are welcome
@kendramamea367710 ай бұрын
nice dog
@necofigo427110 ай бұрын
日本でこんな音させる人いない ありがとうございます
@buzisbuilds465710 ай бұрын
You’re welcome
@frias228711 ай бұрын
🔥🔥🔥💯
@js1936mac11 ай бұрын
Awesome what a Great sound! THANKS.
@buzisbuilds465711 ай бұрын
Glad you like it!
@metoon3092 Жыл бұрын
Love it! I have 2 XJ650's, 1 is the YICS. The _whistling_ sound is awesome!
@buzisbuilds465711 ай бұрын
Thank you and nice. How different is the YICS one.
@metoon309211 ай бұрын
@@buzisbuilds4657 They are like twins, performance wise they're identical.
@alexwood99 Жыл бұрын
Do you still have this bike
@buzisbuilds4657 Жыл бұрын
Yes
@alexwood99 Жыл бұрын
@@buzisbuilds4657 i have the exact same bike was wondering if had any tips on adjusting the clutch
@buzisbuilds465711 ай бұрын
@@alexwood99 I haven’t had to do it on mys, so I don’t have much but, I say just mess with the two nuts that are on the clutch cable. One is on the handle bar next to the clutch and the other on the clutch plate. Do it one at a time, make small adjustments and check if the clutch is where you want it to be before making more adjustments. Hope that makes sense and hope it helps .
@miketr732 Жыл бұрын
I had same bike. Opened up the pipes and it sounded great.mine was the maxim.
@Ottienger Жыл бұрын
just the stock chrome tubes? i was thinking of building or finding a 4-2-1 exhaust but if i can just reuse the stock and blow the guts out of it it would save a bunch of money. is this what this one is? it sounds wicked.
@miketr732 Жыл бұрын
@@Ottienger yes stock tubes. You wouldn't believe how good it sounded. Especially going thru tunnels. I miss that bike.
@kendramamea3677 Жыл бұрын
The end 😭
@buzisbuilds4657 Жыл бұрын
Lol, mhmm, 🤫
@StoneyAxppl Жыл бұрын
How do you get the exhaust to sound like that with the original exhaust on the bike.? Did you remove the baffles.?
@buzisbuilds4657 Жыл бұрын
Yeah and new tips On my channel their is a video on it
@joeylawell3590 Жыл бұрын
Im still rebuilding mine 😮 yours looks mint
@buzisbuilds4657 Жыл бұрын
Thank you !
@fahadbhatti8579 Жыл бұрын
I’m planning on buying one what would be the reasonable price on this?
@buzisbuilds4657 Жыл бұрын
It all depends on the condition of the bike and the location your buying it at, mid condition, meaning runs with decent tires I say 1500 to 2000
@naykaw7684 Жыл бұрын
Could you do how to change the rear brake shoe ? I enjoy watching xj650 video !!
This is the website. The prices vary on what kind of car you have, the shade tent level, if you wanted the set of 5 or not, and if you wanted to add the small window opener like I have on the driver side. I think all was around 600.
@johansilva4888 Жыл бұрын
Así quiero que suene y se vea la mía...
@buzisbuilds4657 Жыл бұрын
Thanks man, do a baffle delete on the exhaust
@LD_Builds Жыл бұрын
Good job. I wanted to install my glass but I'm taking it to a shop I just don't want to mess it up..
@buzisbuilds4657 Жыл бұрын
Thank you and nothing wrong with that.
@damyanpopov1341 Жыл бұрын
I see the Nebraska license plate bro :) Are you still in Nebraska? I'm in the KC area but I'll be in Omaha this summer for an internship. My Probe GT is a 94 and it is white just like yours. I plan to drive it up to Omaha and have it as my car there this summer. I'd be happy to meet other car enthusiasts and other Probe owners while I'm in Omaha this summer. I also have a 95 Mustang GT which I restored but I don't daily it. I drive it any chance I get but my Probe is more my daily. I've got some things I need to fix on my Probe before summer starts.
@buzisbuilds4657 Жыл бұрын
What’s up man and yes I’m still in Nebraska. I’m down to meet another car enthusiast too, especially when we literally have the same cars lol. Just leave me a comment or message me on my instagram @buzibuilds whenever your here. Thank you for the comment!
@damyanpopov1341 Жыл бұрын
@@buzisbuilds4657 alright sounds good I will do that. Expect a message from me on Instagram. So you are in Omaha?
@buzisbuilds4657 Жыл бұрын
@@damyanpopov1341 Lincoln
@damyanpopov1341 Жыл бұрын
@@buzisbuilds4657 ok, I'll just have to make the drive from Omaha sometime then. I'll hopefully see you this summer then. We'll get the chance to take some photos of the 2 Probe's together 😎
@kendramamea3677 Жыл бұрын
what the dog doin ? 🤨
@buzisbuilds4657 Жыл бұрын
Chilling
@ronald09ize Жыл бұрын
💪🏽💪🏽
@inder605 Жыл бұрын
You probably didn’t get good brake pressure on the new one because it still had air in the system. Even if you use the original if there is air it won’t work
@buzisbuilds4657 Жыл бұрын
True, took it to a shop and they had difficulties with bleeding the air out and getting good pressure. I could of ordered the wrong master cylinder too, I will do more videos on it, testing out the stock brake master cylinder with the aftermarket one.
@jonathangaliano2617 Жыл бұрын
@@buzisbuilds4657 Did you ever figure out the issue? I've read that those aftermarket master cylinders are pretty much all junk because I was also looking to get a new one rather than rebuilding mine. Curious to know if this one worked or if you found another one that did.
@buzisbuilds4657 Жыл бұрын
@@jonathangaliano2617 no I have not, I got it to grab a little but still not has a should. I been trying to find a nice used stock master cylinder, to see if that’s the problem. I still haven’t found one, will definitely do a video on it once I do. But yeah if you still have your stock master, reuse it if you can
@kendramamea3677 Жыл бұрын
nice !
@bryceweigartz1489 Жыл бұрын
Hey couldn't figure out how to get that brake sensor out. 30 secs in and you helped me out! Thanks and good luck
@buzisbuilds4657 Жыл бұрын
Glad I was able to help and thank you
@jayflippin6303 Жыл бұрын
@@buzisbuilds4657 where did u getting the fitting for the new handbrake
@jayflippin6303 Жыл бұрын
@@buzisbuilds4657 if possible can u share a link for it
@buzisbuilds4657 Жыл бұрын
@@jayflippin6303 I’m sorry, im a little confused with what you mean by fitting
@jayflippin6303 Жыл бұрын
@@buzisbuilds4657 so I have I the same master cylinder as you and I was wondering what you had to connected to the line for the brake sensor
@KJ7JHN Жыл бұрын
nice install. does the Velcro leak? I'm going to use Black RTV as a sealant. I'll also be using 3/8" black zip ties.
@buzisbuilds4657 Жыл бұрын
Did a leak check and yes,it’s leaking a bit now. The car has been seating in the sun for a while, so not sure if the Velcro adhesive isn’t holding as well: Will definitely try to get a rubber seal and see if that will do. Let me know if you want us to make a video of that later.
@elbassaraghii5744 Жыл бұрын
That’s what I was saying you would need to have a rubber seal or weather strip in between the window and mating surface ,,, but good video it does look awesome 😎 thanks
@HandyL Жыл бұрын
Mine's bigger, Xj750 🤣 Nah i'm just kidding, nice bike. I just got mine running well this past week. WD-40 helped me with getting the carb back onto the gaskets. Also I used a long breaker bar and cranked in one side, so it was in really well on one, kinda on the one next to it. I then went to the other side with the breaker bar and jacked that side in. Only thing you gotta watch out for is the other side wants to pop out when you are pushing on the breaker. There was a spot that you can leverage on the carb without damaging it, and wedge the breaker down onto the starter area in a crevice so it don't move and gives you leverage. Sub ✌
@buzisbuilds4657 Жыл бұрын
Lol, you right and thanks man. That’s nice man, I see, yeah it’s a pain to put them back in, lol I was worried I was going to crack the carbs. That’s good to know and im glad you got yours running too. Hope you’re enjoying it and thanks for watching and for the comment.
@kendramamea3677 Жыл бұрын
bike looking clean 🫶🏽
@buzisbuilds4657 Жыл бұрын
Thank you ! ❤️❤️❤️
@RageoneCG12 жыл бұрын
Anyone know what size bolts are best?
@buzisbuilds4657 Жыл бұрын
You can go to Amazon and buy a torx security screws kit. It comes with a lot of variety of lengths that you could choose.
@RageoneCG1 Жыл бұрын
@@buzisbuilds4657 thanks I appreciate it 🙏
@ronald09ize2 жыл бұрын
🔥🔥
@dylanjury48862 жыл бұрын
Part 2?
@buzisbuilds46572 жыл бұрын
Coming soon
@inder6052 жыл бұрын
Cool bro I just got one for $500. It doesn’t run but I’m in the process of trying to restore it.
@buzisbuilds46572 жыл бұрын
Thanks bro and nice. Great pick up, hope you get it running soon and good luck on the restore
@ronald09ize2 жыл бұрын
💪🏾💪🏾💪🏾
@kendramamea36772 жыл бұрын
nice video 👏🏽 … I’ve seen this car on O St, & it’s legit ! 💯 lol
@buzisbuilds4657 Жыл бұрын
Thanks 💯
@kendramamea36772 жыл бұрын
looks clean
@buzisbuilds46572 жыл бұрын
Thank you
@kendramamea36772 жыл бұрын
nice video 🤩 the bike is going to look great w/ the new paint job ! Great job Benie. 🙌🏽
@buzisbuilds46572 жыл бұрын
Thank you
@emmv18092 жыл бұрын
No entendí ....solo soldaste el escape roto o cambiaste las salidas ?
@buzisbuilds46572 жыл бұрын
Welded new outlets and I don’t understand Spanish, I hope i answered your question.
@emmv18092 жыл бұрын
my question is if you changed the exhausts or just welded the one you had?
@buzisbuilds46572 жыл бұрын
@@emmv1809 got new tips and welded it on the exhaust I had
Пікірлер
This is not a maximum, it's a MAXIM. GRAMMAR must be learned. Regards.
Did you ever swap the bars? I never liked the goose neck on mine i went for a set of flat bars immediately
Love how these have a more sporty sound!!
Me too lol
that S550 looks sick!
Pretty sure I saw your car on the freeway on Sunday? I was on the 91 or the 5 freeway heading towards Huntington. Am I trippin? I pulled up next to you in a black on black mustang GT. Or am I trippin? Lol
lol, you trippin bro!
Camera is too shaky to figure out what is going on.
Just subscribed...
Bless up from 🇯🇲
🔥🔥
Thanks bro
Omg im dying here,my bike is in my front alcove waiting for summer to come, 4 months from now I will hear this sound again.I hate winter.mine is a 1985 700, sounds the same.
Patiently waiting over here
hows drone?
Not bad, sounds really good
🔴 AWESOME SOUND THANK YOU FOR THIS VIDEO 🙋♂️👍👍👍👍👍
You are welcome
nice dog
日本でこんな音させる人いない ありがとうございます
You’re welcome
🔥🔥🔥💯
Awesome what a Great sound! THANKS.
Glad you like it!
Love it! I have 2 XJ650's, 1 is the YICS. The _whistling_ sound is awesome!
Thank you and nice. How different is the YICS one.
@@buzisbuilds4657 They are like twins, performance wise they're identical.
Do you still have this bike
Yes
@@buzisbuilds4657 i have the exact same bike was wondering if had any tips on adjusting the clutch
@@alexwood99 I haven’t had to do it on mys, so I don’t have much but, I say just mess with the two nuts that are on the clutch cable. One is on the handle bar next to the clutch and the other on the clutch plate. Do it one at a time, make small adjustments and check if the clutch is where you want it to be before making more adjustments. Hope that makes sense and hope it helps .
I had same bike. Opened up the pipes and it sounded great.mine was the maxim.
just the stock chrome tubes? i was thinking of building or finding a 4-2-1 exhaust but if i can just reuse the stock and blow the guts out of it it would save a bunch of money. is this what this one is? it sounds wicked.
@@Ottienger yes stock tubes. You wouldn't believe how good it sounded. Especially going thru tunnels. I miss that bike.
The end 😭
Lol, mhmm, 🤫
How do you get the exhaust to sound like that with the original exhaust on the bike.? Did you remove the baffles.?
Yeah and new tips On my channel their is a video on it
Im still rebuilding mine 😮 yours looks mint
Thank you !
I’m planning on buying one what would be the reasonable price on this?
It all depends on the condition of the bike and the location your buying it at, mid condition, meaning runs with decent tires I say 1500 to 2000
Could you do how to change the rear brake shoe ? I enjoy watching xj650 video !!
I will in the future, thank you for views !
Hi mate did you import this bike?
No bought it in the u.s.a !
How much is the lexan for the civic
ysshields.com/collections/lexan-windows/products/ek-hatch?variant=35891933249696
This is the website. The prices vary on what kind of car you have, the shade tent level, if you wanted the set of 5 or not, and if you wanted to add the small window opener like I have on the driver side. I think all was around 600.
Así quiero que suene y se vea la mía...
Thanks man, do a baffle delete on the exhaust
Good job. I wanted to install my glass but I'm taking it to a shop I just don't want to mess it up..
Thank you and nothing wrong with that.
I see the Nebraska license plate bro :) Are you still in Nebraska? I'm in the KC area but I'll be in Omaha this summer for an internship. My Probe GT is a 94 and it is white just like yours. I plan to drive it up to Omaha and have it as my car there this summer. I'd be happy to meet other car enthusiasts and other Probe owners while I'm in Omaha this summer. I also have a 95 Mustang GT which I restored but I don't daily it. I drive it any chance I get but my Probe is more my daily. I've got some things I need to fix on my Probe before summer starts.
What’s up man and yes I’m still in Nebraska. I’m down to meet another car enthusiast too, especially when we literally have the same cars lol. Just leave me a comment or message me on my instagram @buzibuilds whenever your here. Thank you for the comment!
@@buzisbuilds4657 alright sounds good I will do that. Expect a message from me on Instagram. So you are in Omaha?
@@damyanpopov1341 Lincoln
@@buzisbuilds4657 ok, I'll just have to make the drive from Omaha sometime then. I'll hopefully see you this summer then. We'll get the chance to take some photos of the 2 Probe's together 😎
what the dog doin ? 🤨
Chilling
💪🏽💪🏽
You probably didn’t get good brake pressure on the new one because it still had air in the system. Even if you use the original if there is air it won’t work
True, took it to a shop and they had difficulties with bleeding the air out and getting good pressure. I could of ordered the wrong master cylinder too, I will do more videos on it, testing out the stock brake master cylinder with the aftermarket one.
@@buzisbuilds4657 Did you ever figure out the issue? I've read that those aftermarket master cylinders are pretty much all junk because I was also looking to get a new one rather than rebuilding mine. Curious to know if this one worked or if you found another one that did.
@@jonathangaliano2617 no I have not, I got it to grab a little but still not has a should. I been trying to find a nice used stock master cylinder, to see if that’s the problem. I still haven’t found one, will definitely do a video on it once I do. But yeah if you still have your stock master, reuse it if you can
nice !
Hey couldn't figure out how to get that brake sensor out. 30 secs in and you helped me out! Thanks and good luck
Glad I was able to help and thank you
@@buzisbuilds4657 where did u getting the fitting for the new handbrake
@@buzisbuilds4657 if possible can u share a link for it
@@jayflippin6303 I’m sorry, im a little confused with what you mean by fitting
@@buzisbuilds4657 so I have I the same master cylinder as you and I was wondering what you had to connected to the line for the brake sensor
nice install. does the Velcro leak? I'm going to use Black RTV as a sealant. I'll also be using 3/8" black zip ties.
Did a leak check and yes,it’s leaking a bit now. The car has been seating in the sun for a while, so not sure if the Velcro adhesive isn’t holding as well: Will definitely try to get a rubber seal and see if that will do. Let me know if you want us to make a video of that later.
That’s what I was saying you would need to have a rubber seal or weather strip in between the window and mating surface ,,, but good video it does look awesome 😎 thanks
Mine's bigger, Xj750 🤣 Nah i'm just kidding, nice bike. I just got mine running well this past week. WD-40 helped me with getting the carb back onto the gaskets. Also I used a long breaker bar and cranked in one side, so it was in really well on one, kinda on the one next to it. I then went to the other side with the breaker bar and jacked that side in. Only thing you gotta watch out for is the other side wants to pop out when you are pushing on the breaker. There was a spot that you can leverage on the carb without damaging it, and wedge the breaker down onto the starter area in a crevice so it don't move and gives you leverage. Sub ✌
Lol, you right and thanks man. That’s nice man, I see, yeah it’s a pain to put them back in, lol I was worried I was going to crack the carbs. That’s good to know and im glad you got yours running too. Hope you’re enjoying it and thanks for watching and for the comment.
bike looking clean 🫶🏽
Thank you ! ❤️❤️❤️
Anyone know what size bolts are best?
You can go to Amazon and buy a torx security screws kit. It comes with a lot of variety of lengths that you could choose.
@@buzisbuilds4657 thanks I appreciate it 🙏
🔥🔥
Part 2?
Coming soon
Cool bro I just got one for $500. It doesn’t run but I’m in the process of trying to restore it.
Thanks bro and nice. Great pick up, hope you get it running soon and good luck on the restore
💪🏾💪🏾💪🏾
nice video 👏🏽 … I’ve seen this car on O St, & it’s legit ! 💯 lol
Thanks 💯
looks clean
Thank you
nice video 🤩 the bike is going to look great w/ the new paint job ! Great job Benie. 🙌🏽
Thank you
No entendí ....solo soldaste el escape roto o cambiaste las salidas ?
Welded new outlets and I don’t understand Spanish, I hope i answered your question.
my question is if you changed the exhausts or just welded the one you had?
@@emmv1809 got new tips and welded it on the exhaust I had
interesting !
I think so too!
who’s wifey ? 🚫💍
sounds badass lol
😎😎😎