Пікірлер

• 
  @MOGHBMW4 күн бұрын

  love you mate thks a lot so easy to do <3

• 
  @maggsvamp10 күн бұрын

  where's part 3?

• 
  @maggsvamp10 күн бұрын

  wire got stuck on 5:28.

• 
  @joshmatthew989014 күн бұрын

  Hey man, When you installed your windshield was it a brand new oem seal or an old seal? @skudak

• 
  @skudak13 күн бұрын

  @@joshmatthew9890 it was an old one

• 
  @JohnZ65027 күн бұрын

  Wait, aIl gotta do is stick my door handles in the microwave and they're good as new?! Awesome video series man, beautiful build!

• 
  @yojoehdАй бұрын

  I own and have rebuilt years 1959 and 1968 Powermatic model 100 planers.There are two posts on KZread that seem identical by SKUDAK/KYLE. I will address both of these videos on both sites. First, the videos certainly are helpful in doing a rebuild. The process follows along quite well except for one process. I suggest installing the pressure bar before installation of the outfeed roller or outfeed roller gears. Otherwise you will be required to remove these components to fit the pressure bar into its location. Removal of the outfeed drive gear is also necessary to access and tighten the nut on the bottom of the pressure bar. I did not remove the entire outfeed roller but I was required to dismantle the outfeed roller gear system and the clutch gear to enable lowering of the outfeed roll for placement of the pressure bar. It should also be noted that assembly of the pressure bar is basically skipped over in the video. There is one minute little video clip depicting pressure bar placement. Otherwise this video certainly can help answer a lot of questions during the assembly process.

• 
  @OwenRocks-ob6viАй бұрын

  Would love to know how the seats fit as well for those Subs, I've been waiting todo this as I've been thinking if the stock seats will move back and fourth over the subs and function without creating or scraping them.

• 
  @OwenRocks-ob6viАй бұрын

  Please tell me where you got that sunroof from!

• 
  @skudakАй бұрын

  @@OwenRocks-ob6vi I bought it from a friend, a couple companies made them in the 80's, they pop up for sale every once in a while

• 
  @user-xh3zw6gv6oАй бұрын

  do you have link to the lip?

• 
  @HenryIsGamingАй бұрын

  Did you make that booster bracket?

• 
  @skudakАй бұрын

  Yeah I made all of it

• 
  @HenryIsGamingАй бұрын

  @@skudak Damn that looks really good.. hoped it was for sale.

• 
  @mr.he-rock-ohh2355Ай бұрын

  @@skudak are you selling any of the braketry you made?

• 
  @efl5775Ай бұрын

  What coilovers are these? seems they have a wide range of height adjustability

• 
  @skudakАй бұрын

  They're from ISC

• 
  @Turboozay2 ай бұрын

  what is that screen i need that loi

• 
  @handro1232 ай бұрын

  I love the color combo. Also looking forward to see with what you come up with for a modern shifter surround with wireless charging and cup holders.

• 
  @Melodera2 ай бұрын

  The CNC Door handle is very nice!

• 
  @myeditedhandle2 ай бұрын

  letsss goooo finally another upload

• 
  @chgotbanned2 ай бұрын

  Just from the first title I see you use Davinci Free Version lol, same. Did this whole install in mine last year, kinda went overboard but nah shes a schlapper

• 
  @Alishx812 ай бұрын

  great installation❤️ do you happen to have the stl files for the airvent relocation? cause I didn't find anything like that on the internet. thanks🙏

• 
  @adriandoc752 ай бұрын

  7.20 try a length of string inside the grove of the window rubber. Pulling the string out will fold the rubber round the glass.

• 
  @chay37643 ай бұрын

  I know this is an old video but I want to say thank you for not time lapsing everything, I don’t know much about cars, and I want to eventually build an e30 myself

• 
  @stephenwhite54443 ай бұрын

  Just an idea for some who dont want to cut carpet and drill their floorboard for the amp. I typically put a piece of plywood same size as amp under the carpet with amp above carpet and run screws through the carpet into the wood. It stays nice and secure. Sometimes if the carpet is real loose, ill put locking velcro under the plywood to keep it from moving, but thats typically not necessary. Works great and non invasive.

• 
  @ruckwartsgangclassicautomo74583 ай бұрын

  Where did you get that glas sunroof from?

• 
  @malcolmdavis59473 ай бұрын

  I would like to know where do you source all your parts for the build.

• 
  @user-sq2ir4yy4t4 ай бұрын

  Hi, In the phase of rebuild a simular project. Question is if you would happen to have the part Numbers or the many clips to fasten the chrome elements around the windows, als also the clips to fasten bumpers etc, when restoring met Porsche 911 1985 it had an extensive workshop manual and parts list but BMW E30 is low in documentation of this … thanks to reach out

• 
  @skudak4 ай бұрын

  Check the next video for how I find part numbers. I also put all the part numbers i used in the description

• 
  @PaulADeSmet4 ай бұрын

  @@skudak Many thanks for the fast reply ❤

• 
  @fredian274 ай бұрын

  How much cost to restored this car on that detail?

• 
  @Rfp98744 ай бұрын

  That is an amazing color on that car. Enjoying the video on this build.

• 
  @muhammadalzoubi45934 ай бұрын

  Good bless you

• 
  @lookatmatthew62815 ай бұрын

  How did you go about securing the screen?

• 
  @Cupra317hp5 ай бұрын

  Power canle and Signal Never on one side.

• 
  @SodaCola85 ай бұрын

  Yo bro i just bought a 318is and your channel is going to be so helpfull thank you so much keep doing videos they are great. Did you show footage of you driving the car yet ? I did not watch all videos for now. Ty !

• 
  @MegaRetr5 ай бұрын

  Hey gorgeous car great video😊

• 
  @BMS-Motosport5 ай бұрын

  Hi is there a video on installing an android display😊😊😊

• 
  @AlexandrGest5 ай бұрын

  Жаль что во всей машине при сборке ни один болт не смазан😢

• 
  @AlexandrGest5 ай бұрын

  Жаль что во всей машине при сборке ни один болт не смазан😢

• 
  @AlexandrGest5 ай бұрын

  Жаль что во всей машине при сборке ни один болт не смазан😢

• 
  @pandasalvesen19775 ай бұрын

  😍

• 
  @pandasalvesen19775 ай бұрын

  😁

• 
  @Wayne-yn2nc5 ай бұрын

  ОЧЕНЬ КРУТО ! ЖАЛКО ,что какждый не может сделать так со своей е30 в нынешних реалиях

• 
  @pandasalvesen19775 ай бұрын

  🤩

• 
  @lookatmatthew62815 ай бұрын

  Is that a lamtto 9.26 screen?

• 
  @skudak5 ай бұрын

  I just updated the description with a link. For a while the amazon listing was completely gone and "Unavailable"

• 
  @lookatmatthew62815 ай бұрын

  Thanks for reply!@@skudak

• 
  @cezcars5 ай бұрын

  Just found your chanel, Keep up the good work!

• 
  @Kris-825 ай бұрын

  hey, where did you get those black mountings for brake lines @0:19?

• 
  @skudak5 ай бұрын

  They came with the car, if you check realoem.com you should be able to find the part number

• 
  @SalvaYusuf5 ай бұрын

  Test Sound ?

• 
  @ianconn74155 ай бұрын

  Very interested to know what screen that is… and also if you would be willing to share/sell 3d print files. I had a similar idea about relocating vents. But you have done a great job of it…

• 
  @GrandProductionsMedia5 ай бұрын

  Great system, we have some similarities, I ended up going with the Addison bit 10 for dsp. Great work and video

• 
  @yyturkerr6 ай бұрын

  Dream stereo build king!

• 
  @laddtryck6 ай бұрын

  Nice! But missing out on potential by not sounddeadening and not using speaker gaskets.

• 
  @user-xg1io4ie2r6 ай бұрын

  setup up dowe lamp ?

• 
  @gerekappo6 ай бұрын

  great!!! i just wanted to see on the description the lcd!

• 
  @ttchicharito51306 ай бұрын

  Good jop bro 👍

• 
  @user-ps9ci9yg6u6 ай бұрын

  WHAT IS THE MODEL OF THE ANDROID MONITOR??