Thank you for the well done vid. Very informative.
@locker1325Күн бұрын
I'm a little confused about lift points. It appears it doesn't lift by the pinch weld area but by pads located elsewhere. How do you know if this will work on your car?
@georgekern65282 күн бұрын
Greetings Canadian cousin! You truly have some wicked good skills and tenacity!! Cheers George
@kogers55952 күн бұрын
Nice update. Looking forward to the next video.
@thenewviceroy3 күн бұрын
So much work, quality restoration. On a car you won't ever see a return on! That's courage.
@DeadEndRestorations3 күн бұрын
Very true! thanks!
@trevorr51754 күн бұрын
Hey there, I was just wondering where you bought the BE bearings and ARP bolts from? I am in Ontario as well with my high mileage S65 (250k) and want to do this service too but just don't know where to order from Thanks!
@DeadEndRestorations4 күн бұрын
Hey - I think I bought the RB's from ECS tuning and the bolts either from them or from FCP euro. Cheers and good luck!
@DeadEndRestorations4 күн бұрын
The duty is a huge pain, would recommend shipping to border and 'picking them up' it will save you $200-300 easily
@trevorr51754 күн бұрын
@@DeadEndRestorations Thanks! I am in Ottawa so only about an hour. I heard horror stories from ECS damaging packages and shipping out the wrong items. DId you experience that at all?
@aboyandhisdog4 күн бұрын
Very nice! But...A car that has the full set of underbody panels.... I don't think I would be able to remove the panels with those wide lift sections under the car. I have a 997 and pretty sure it won't work. My Quickjacks work well, but don't' go as high of course. Thanks for the video! -Tom.
@TheMustden5 күн бұрын
Great content! Nice DIY channel!
@DeadEndRestorations5 күн бұрын
Dammit why you gotta hit me with the harsh truth!
@CityEstates5 күн бұрын
Annnd he is back! Bringing her back from the dead. That rear bumper and rear of the car might need a blend, paint correction unlikely to get it looking right (ask me how I know lol)
@dzeeeeko5 күн бұрын
Glad to see a video! I love those tires, I had them on my E90 M3 and I loved them! They have fantastic traction for country roads and light track duty. They work well in the wet as well.
@DeadEndRestorations5 күн бұрын
Goad to hear! Drove them a bit so far and agree they have fantastic grip and traction so far
@Bavarian_M5 күн бұрын
Looks good but the bumper color look off.
@DeadEndRestorations5 күн бұрын
Ya i need to paint correct the rest of the car as the old paint is a bit faded vs the new. Cheers!
@TheHunterHofman5 күн бұрын
Glad to have you back buddy. Glad that you’re keeping it OEM, love that.
@DeadEndRestorations5 күн бұрын
Thank you sir!
@DeadEndRestorations5 күн бұрын
Thank you sir!
@markan6675 күн бұрын
👌🏻👌🏻👌🏻👌🏻
@muazqamar5 күн бұрын
Uhh.. Was that just me or is the rear bumper a completely different color from the car?
@DeadEndRestorations5 күн бұрын
Ya i need to paint correct the rest of the car as the old paint is a bit faded (lighter) vs the new. This is what happens when you only paint the bumpers vs ‘blend’ in other panels with new paint. Cheers!
@muazqamar5 күн бұрын
@@DeadEndRestorations Oh okay gotcha! Well, now I have another thing to look forward to. I know I've said this before but you are awesome. I won't compare you to another KZreadr but I love that you are restoring the car and doing most of the work (restoration) yourself (DIY style) instead of going down the modding route. Love your content!
@briant645 күн бұрын
Nice! Been looking forward to another episode
@DeadEndRestorations5 күн бұрын
Sorry its been a while, enjoy!!
@svennilsson43716 күн бұрын
10:48 you are missing the gloves from the tool kit. Mine has them
@DeadEndRestorations5 күн бұрын
Good catch, lucky you!!
@kendziuk65769 күн бұрын
Nice 👌🏼👍🏼👍🏼
@TheMustden9 күн бұрын
How much does it cost to runa 20A plug? Is there converter as a solution?
@DeadEndRestorations5 күн бұрын
It cost about $100 in labour and another $100 in parts
@TheMustden5 күн бұрын
Thank you very much for the idea. I am looking to do a similar setup.
@jankowalski343010 күн бұрын
CRETINO
@QwertyQwerty-zn8wz13 күн бұрын
Плекой только защитной заклей фары после полировки.
@GalaxiusX14 күн бұрын
Hey would you know how to remove the wheels on the lift? It seems like theres no easy way to remove the lift wheels once you move it!
@DeadEndRestorations5 күн бұрын
to mount/remove them the lift needs to be up as it rotates the pipe that the wheels attach to. Cheers!
@anonymous..-14 күн бұрын
This is the best lift. Got rid of my quick jacks and bought this. Due to its construction, it gives you a lot of safety confidence.
@user-dh4sc1sz9h15 күн бұрын
Достаточно редкий экземпляр в наших краях, молодцы что восстановили нестареющую классику!
@juanje306518 күн бұрын
Increible
@spirosgikas777824 күн бұрын
Muy excelente my friend...
@3UZFE28 күн бұрын
I have a 540i that is 6 speed manual swapped with 540i / M5 suspension upgrades (springs/shocks/sway-bars) and it's sublime, certainly not a all out sports car but a very fun touring car, endlessly fun to drive at any speed.
@DeadEndRestorations26 күн бұрын
lovely! cheers
@blackbirdxx4613Ай бұрын
What did it actually cost eventually
@DeadEndRestorations26 күн бұрын
Check out one of my other vids in the series, I do a full cost breakdown ;)
@blackbirdxx4613Ай бұрын
Was great but a little too fast😂😂
@blackbirdxx4613Ай бұрын
Beautiful work mate.... Subbed
@blackbirdxx4613Ай бұрын
What did you pay for it initially
@DeadEndRestorations26 күн бұрын
$5k Canadian
@lucianomoraesdesantana7608Ай бұрын
Muito esforçado. Nem espaço tem para trabalhar. Está de parabéns!
@kristianperic8082Ай бұрын
What a restoration - beautiful car, amazing work. Can't wait to restore my 535i E34 1989 5 speed manual, it put a smile on my face whenever I drove it.
@Ariccio123Ай бұрын
2:45 I think I see this view in diagram 501282007. Investigating further, but that's page 472 of my electrical troubleshooting manual. I thought this would be an interesting lil challenge Edit #1: I spot a poorly OCRd fuse labeled "F8663" on page 33 Edit #2: on page 115 it appears to be F8693??
@DontCryAboutItАй бұрын
Chinese all seasons on a BMW, smh.
@artsmspАй бұрын
Amazing work!
@gman5523Ай бұрын
Can’t believe you did all this is a shoebox of a garage with no ramp 😮 well done 👍
@leehooliganАй бұрын
great video! curious, when the freight truck came to your home to delivery the heavy items, did you have to pay for liftgate service, and did they drop it off on the curbside or on your driveway? Or, did they help you lift it into your garage? Any insight would be helpful, as that is my only hesitation to purchase heavy equipment. I have a sloping driveway into the garage and not sure how to handle the last 25 feet of maneuvering, even if I rented a pallet jack from the hardware store. Any insights are greatly appreciated. Thanks!!
@DeadEndRestorationsАй бұрын
Truck had a lowering ramp and the driver used a pallet jack and the two of us barely pulled it up the driveway and into the garage. My driveway is a slight incline but nothing major and it was very difficult. You better call some strong friends over the day it gets delivered :)
@user-ht1it4lm1wАй бұрын
Pantalon😂 English language😂😂 funny In Russian pantalon it's underpants😂😂😂 l am sorry from Moscow
@DeadEndRestorationsАй бұрын
Spasiba moj drug! In Serbian its just pants but that's pretty funny
@user-ht1it4lm1wАй бұрын
Everything is fine, you brother has golden hands, this is the main thing it's a pleasure to watch
@patapongyuamsroul5658Ай бұрын
This is so amazing!!!
@MPG.BroughАй бұрын
Wow we came across your channel, the e34 was stunning in everyway. What a fantastic looking car. I came close to owning one in the early 2000,s but opted for the jaguar sovereign. Bmw should have been my choice. Great videos great comedy roll on more vids oh we are in England
@DeadEndRestorationsАй бұрын
Thanks for watching!
@piotrw2108Ай бұрын
Great job. I admire the attention to detail. Awesome.
@ondernxkddskjddols6066Ай бұрын
Congratulations
@sophalАй бұрын
I really like this, however I’m afraid what the shipping cost would be to Calgary.
@harrycee656Ай бұрын
I just got my Quickjack 7000tl. I have 9ft ceilings and 7.5ft garage door up. The QJ max lift maxes out possibly lift height in my garage. Plus they are easy to move for a temporary paint booth which is important for restoring cars.
@CapitalAutomotiveequipmentontАй бұрын
Hey, thanks a lot for supporting our products. We try to carve out the best quality along with friendly prices for our Canadian customers.
@muazqamarАй бұрын
God you're awesome! I love this channel already. I hope you find tonnes of success in KZread and in life and I can't wait to watch more videos on your channel! Love your style and substance!
@DeadEndRestorationsАй бұрын
Thank you so much!!
@SanDiego_VDubLifeАй бұрын
Hey buddy. Loved the video. Very clear and concise. I am sold and hope to get this same product in the future. My current barriers are, I don’t have a garage 😂 and two, I don’t have a 220 outlet. So the plan is to get those two things first and then I will pick up one of these lifts. I also mainly work on aircooled VWs that don’t have frames and use a floor pan design, but this should still work fine. I’m excited about getting one and it would take my hobby to a whole nother level😆 pun intended.
@Alan_Edwards29 күн бұрын
I have the same issue with not access to 220 unless I rewire my garage's panel which is a big job in and of itself being as my garage is not attached. Still trying to justify the expense too, but man I want one.
@muazqamarАй бұрын
This is the first video I've seen on your channel and you have a new subscriber. Thank you for actually restoring the car and not "restoring" it by putting coilovers and carbon this and exhaust that. You're awesome!
Пікірлер
Thank you for the well done vid. Very informative.
I'm a little confused about lift points. It appears it doesn't lift by the pinch weld area but by pads located elsewhere. How do you know if this will work on your car?
Greetings Canadian cousin! You truly have some wicked good skills and tenacity!! Cheers George
Nice update. Looking forward to the next video.
So much work, quality restoration. On a car you won't ever see a return on! That's courage.
Very true! thanks!
Hey there, I was just wondering where you bought the BE bearings and ARP bolts from? I am in Ontario as well with my high mileage S65 (250k) and want to do this service too but just don't know where to order from Thanks!
Hey - I think I bought the RB's from ECS tuning and the bolts either from them or from FCP euro. Cheers and good luck!
The duty is a huge pain, would recommend shipping to border and 'picking them up' it will save you $200-300 easily
@@DeadEndRestorations Thanks! I am in Ottawa so only about an hour. I heard horror stories from ECS damaging packages and shipping out the wrong items. DId you experience that at all?
Very nice! But...A car that has the full set of underbody panels.... I don't think I would be able to remove the panels with those wide lift sections under the car. I have a 997 and pretty sure it won't work. My Quickjacks work well, but don't' go as high of course. Thanks for the video! -Tom.
Great content! Nice DIY channel!
Dammit why you gotta hit me with the harsh truth!
Annnd he is back! Bringing her back from the dead. That rear bumper and rear of the car might need a blend, paint correction unlikely to get it looking right (ask me how I know lol)
Glad to see a video! I love those tires, I had them on my E90 M3 and I loved them! They have fantastic traction for country roads and light track duty. They work well in the wet as well.
Goad to hear! Drove them a bit so far and agree they have fantastic grip and traction so far
Looks good but the bumper color look off.
Ya i need to paint correct the rest of the car as the old paint is a bit faded vs the new. Cheers!
Glad to have you back buddy. Glad that you’re keeping it OEM, love that.
Thank you sir!
Thank you sir!
👌🏻👌🏻👌🏻👌🏻
Uhh.. Was that just me or is the rear bumper a completely different color from the car?
Ya i need to paint correct the rest of the car as the old paint is a bit faded (lighter) vs the new. This is what happens when you only paint the bumpers vs ‘blend’ in other panels with new paint. Cheers!
@@DeadEndRestorations Oh okay gotcha! Well, now I have another thing to look forward to. I know I've said this before but you are awesome. I won't compare you to another KZreadr but I love that you are restoring the car and doing most of the work (restoration) yourself (DIY style) instead of going down the modding route. Love your content!
Nice! Been looking forward to another episode
Sorry its been a while, enjoy!!
10:48 you are missing the gloves from the tool kit. Mine has them
Good catch, lucky you!!
Nice 👌🏼👍🏼👍🏼
How much does it cost to runa 20A plug? Is there converter as a solution?
It cost about $100 in labour and another $100 in parts
Thank you very much for the idea. I am looking to do a similar setup.
CRETINO
Плекой только защитной заклей фары после полировки.
Hey would you know how to remove the wheels on the lift? It seems like theres no easy way to remove the lift wheels once you move it!
to mount/remove them the lift needs to be up as it rotates the pipe that the wheels attach to. Cheers!
This is the best lift. Got rid of my quick jacks and bought this. Due to its construction, it gives you a lot of safety confidence.
Достаточно редкий экземпляр в наших краях, молодцы что восстановили нестареющую классику!
Increible
Muy excelente my friend...
I have a 540i that is 6 speed manual swapped with 540i / M5 suspension upgrades (springs/shocks/sway-bars) and it's sublime, certainly not a all out sports car but a very fun touring car, endlessly fun to drive at any speed.
lovely! cheers
What did it actually cost eventually
Check out one of my other vids in the series, I do a full cost breakdown ;)
Was great but a little too fast😂😂
Beautiful work mate.... Subbed
What did you pay for it initially
$5k Canadian
Muito esforçado. Nem espaço tem para trabalhar. Está de parabéns!
What a restoration - beautiful car, amazing work. Can't wait to restore my 535i E34 1989 5 speed manual, it put a smile on my face whenever I drove it.
2:45 I think I see this view in diagram 501282007. Investigating further, but that's page 472 of my electrical troubleshooting manual. I thought this would be an interesting lil challenge Edit #1: I spot a poorly OCRd fuse labeled "F8663" on page 33 Edit #2: on page 115 it appears to be F8693??
Chinese all seasons on a BMW, smh.
Amazing work!
Can’t believe you did all this is a shoebox of a garage with no ramp 😮 well done 👍
great video! curious, when the freight truck came to your home to delivery the heavy items, did you have to pay for liftgate service, and did they drop it off on the curbside or on your driveway? Or, did they help you lift it into your garage? Any insight would be helpful, as that is my only hesitation to purchase heavy equipment. I have a sloping driveway into the garage and not sure how to handle the last 25 feet of maneuvering, even if I rented a pallet jack from the hardware store. Any insights are greatly appreciated. Thanks!!
Truck had a lowering ramp and the driver used a pallet jack and the two of us barely pulled it up the driveway and into the garage. My driveway is a slight incline but nothing major and it was very difficult. You better call some strong friends over the day it gets delivered :)
Pantalon😂 English language😂😂 funny In Russian pantalon it's underpants😂😂😂 l am sorry from Moscow
Spasiba moj drug! In Serbian its just pants but that's pretty funny
Everything is fine, you brother has golden hands, this is the main thing it's a pleasure to watch
This is so amazing!!!
Wow we came across your channel, the e34 was stunning in everyway. What a fantastic looking car. I came close to owning one in the early 2000,s but opted for the jaguar sovereign. Bmw should have been my choice. Great videos great comedy roll on more vids oh we are in England
Thanks for watching!
Great job. I admire the attention to detail. Awesome.
Congratulations
I really like this, however I’m afraid what the shipping cost would be to Calgary.
I just got my Quickjack 7000tl. I have 9ft ceilings and 7.5ft garage door up. The QJ max lift maxes out possibly lift height in my garage. Plus they are easy to move for a temporary paint booth which is important for restoring cars.
Hey, thanks a lot for supporting our products. We try to carve out the best quality along with friendly prices for our Canadian customers.
God you're awesome! I love this channel already. I hope you find tonnes of success in KZread and in life and I can't wait to watch more videos on your channel! Love your style and substance!
Thank you so much!!
Hey buddy. Loved the video. Very clear and concise. I am sold and hope to get this same product in the future. My current barriers are, I don’t have a garage 😂 and two, I don’t have a 220 outlet. So the plan is to get those two things first and then I will pick up one of these lifts. I also mainly work on aircooled VWs that don’t have frames and use a floor pan design, but this should still work fine. I’m excited about getting one and it would take my hobby to a whole nother level😆 pun intended.
I have the same issue with not access to 220 unless I rewire my garage's panel which is a big job in and of itself being as my garage is not attached. Still trying to justify the expense too, but man I want one.
This is the first video I've seen on your channel and you have a new subscriber. Thank you for actually restoring the car and not "restoring" it by putting coilovers and carbon this and exhaust that. You're awesome!
Thanks for the sub!
Unbelievable finish. Just wow 🤩
Thank you!