Пікірлер

• 
  @gregwilliams3865 күн бұрын

  I bought 5 of them back in the 70's at a surplus store next to the Naval Base in San Diego. I used the can opener.

• 
  @ericaluttrell345416 күн бұрын

  It would be a good kicker motor

• 
  @eddieherring678923 күн бұрын

  I inherited one of these love it beautiful gun

• 
  @ROE130026 күн бұрын

  Nice video. What is the choke on the shotgun barrel?

• 
  @skswig125 күн бұрын

  Open choke, it looks cylinder bored to me.

• 
  @ROE130025 күн бұрын

  @@skswig1 Thanks for the update.

• 
  @SanguivoreАй бұрын

  I know this is quite an old video, but if you ever think about selling this, I’d be interested.

• 
  @skswig1Ай бұрын

  Well I have had this so long and it a really nice gun to shoot. I think I will keep it. They are one of the nicer 38 Smith and Wesson guns out there. I you have never shot one you should get one. So quiet and low recoil compared to 38 special.

• 
  @SanguivoreАй бұрын

  @@skswig1 Good to know, my friend! ☺️ And I actually have one of the hammerless ones from around 1905, and just picked up a Smith & Wesson one too. Haven’t got a chance to shoot either one yet, but I really look forward to it. .38S&W seems like quite the pleasurable round for range time.

• 
  @paulleescratcherАй бұрын

  Its a 20 dollar winner 2 diamond

• 
  @History_GregАй бұрын

  I have one on my sailboat. My transom is weirdly shaped, so I can't actually tilt the motor all the way to the locking position. I tie it off after lifting a bit. Seems to run fine, I only use it while docking.

• 
  @18echo2 ай бұрын

  Great score , hope you enjoy them , my timberland 6 fits two cots and room to spare with both vests. 💪🏼💪🏼💪🏼 2:33

• 
  @skswig12 ай бұрын

  does yours smell for a day after you put it up?

• 
  @18echo2 ай бұрын

  @@skswig1I did the pitch your tent and hose it down inside and out procedure with a aquacrest inline filter, let it completely air dry and when packing it up again throw two antistatic dryer sheets inside and presto you will get rid of the funny smell for months .

• 
  @driftingdynamic2 ай бұрын

  I know this is 10 years old but thanks. Im glad you didn't cut the video so we can see how long it actually takes. Just ordered one for all the partially dead oak branches that are a danger during rain.

• 
  @dannyjackson20622 ай бұрын

  I've not found one case xx usmc sharpening

• 
  @meumundonaflorida6083 ай бұрын

  😂😂😂😂😂

• 
  @bluegrassdiggers90303 ай бұрын

  Give him a break guys its a mistake anyone can make.

• 
  @bluegrassdiggers90303 ай бұрын

  Has anybody come across a ticket that says claim at lottery headquarters but doesn't show a win?

• 
  @user-xr9mw5vg8w4 ай бұрын

  The decal by the handle had the number on it. I think they were made in 1935. First ones were painted dark brown. Later ones were green.

• 
  @user-zj2bs5nz9v4 ай бұрын

  How much are they worth?

• 
  @Farmboy19664 ай бұрын

  Carb needs cleaned

• 
  @dclaet11354 ай бұрын

  Also known as Anniversary Song.

• 
  @theguyinmaine4 ай бұрын

  I have the same revolver only market 926. Everything is the exactly the same. They changed the model number to separate the two models I believe. Just bought the other 925 and it's that 2 1/2" barrel with completely different grips. It doesn't have the little loop behind the trigger guard so you pinch your fingers in there. The addition to the loop or tail was a good move. New England Firearms put it on near all models when they took over H&R.

• 
  @gregcamp42904 ай бұрын

  I was taught from a very early age always shoot with both eyes open ..and still do to this day..and teach young 1 to do the same...the only eay to shoot a scope scout style or normal

• 
  @skswig14 ай бұрын

  I shot on rifle team in HS we used an occluding patch on our glasses to block the weak eye without squinting.

• 
  @theguyinmaine5 ай бұрын

  I've replaced them in every H&R I have. Like you say, if you buy one, count on it. $30.00 plus shipping now, 2024. Easy way to change it, Cock the gun, put a pin in the bottom of the rod, decock it and take the spring and rod out. Put the new one in, cock it, take the pin out and done. I have the same revolver, I think it's a work of art. The piece that goes back off the trigger guard is so you fingers don't get jammed up in between the trigger guard and the grip, SEE 929, 930 model, you'll see.

• 
  @grmeyers5 ай бұрын

  We used them for years back in the 60's. Wish I could find a few, but for some reason can't seem to find them anymore.

• 
  @brucehensler98246 ай бұрын

  I received a 926 H&R as payment for labor on a motorcycle that I worked on. It had a broken plastic piece. I took it to a friend that made a part from titanium. He wouldn't take any payment for his work. It has performed flawlessly ever since.

• 
  @nickblaze48726 ай бұрын

  I came upon this site because I ONLY scan tickets, and I do not try to play them. I hit a $200.00 winner... They could not cash it out because it was very late and their drawer was light... Out of curiosity, I scratched it off to see what hit... I found $150.00 ONLY! After searching for near 30 minutes... It drove me mad... I scanned FL lottery app 2 times. Still could not find that $50.00 extra... Their error on misprint, so I cashed in off barcode.. I believe they should be worth more for the error, but maybe they're not so common...

• 
  @user-kl9tq9br4b7 ай бұрын

  in the Philippines🇵🇭we call this rifle "ARMALIKE"☝️

• 
  @craigfinley25077 ай бұрын

  I bought a almost new looking gun 732 serial no. AD 1967 i had the same problem gun works great now, but i dont know what part he put in the gun plastic or medal how can i check to find out i have no gun experience. And tell me wear to get new one just in case. Thank you for info. Get back please

• 
  @americancoinandcurrencyvideos7 ай бұрын

  I just Scanned one of my tickets from the florida lottery showed a five dollar Winner with no winning pattern

• 
  @jastern9498 ай бұрын

  You got the bug!!! ;-) [Welcome.. Prepare the wallet...]

• 
  8 ай бұрын

  I also have a non-winning winning scratch off, and the lottery people say, that’s not possible. The non-winning ticket paid $25 and the Florida lottery said that it 1/10th of 1% that could happen, and that no one has ever heard of that.

• 
  @robertclark49299 ай бұрын

  Looks like crap

• 
  @DamnRightDamien9 ай бұрын

  Would you shoot buffalo bore out of it? Or .38/300?

• 
  @thomk97679 ай бұрын

  Great information. My 925 has this problem. Question about the serial numbers. Mine is AJ... When you said yours was an AE, I expected 1945, but you said 1968. I'm not sure what year that would make mine. Thoughts?

• 
  @skswig19 ай бұрын

  AJ is 1972

• 
  @clancambo52979 ай бұрын

  Would light even quicker if you followed the instructions fully!

• 
  @jdmbraceyourself98609 ай бұрын

  Nice

• 
  @Blangmenyunyank9 ай бұрын

  Wooow

• 
  @skswig110 ай бұрын

  Not sure why it cut off but this was pretty much the end anyway.

• 
  @mikemorgan501510 ай бұрын

  Coleman is/was based in Wichita, KS. Over the years, several manufacturers were awarded contracts to produce these. Coleman's numbering system called this the 536. The aluminum cases produced by Coleman were stamped C-M. Rogers from Akron, Ohio, SMP(State Machine Products) from Dry Ridge, Kentucky, Aladdin(I believe), Wyott, American Gas Machine(AGM), Fiesta, Bialaddin(UK). I know for a fact that they were still in the US Army supply system in 1990 or so. I was an MLRS launcher chief in Germany at the time and notice an empty storage location in the storage box marked, STOVE. I did some research and found the NSN was still a valid and on the AAL(Additional Authorized List) for the launcher. So I ordered one and it came in to supply in just a couple of weeks. But the supply sergeant liked it so much, he kept it. So I ordered another and it came in and I signed for it this time. As with most gasoline powered appliances, if you read and follow the instructions printed on the side, they will work great. These went away soon after as we were getting HMMWVs in to replace jeeps. The only things still running on MOGAS were lanterns, stoves, M2 burners, Immersion heaters, yukon stoves and generators. There was an admittedly good reason to go to a single fuel (JP-8) for everything. These stoves and milspec lanterns were casualties of that decision. They were NOT designed to "run on anything that burns", though this is a common claim. They were designed to run on any gasoline, leaded or unleaded. I was told by our POL (petroleum, oils, and lubricants specialists) guys that they could order 55gal drum of white gas and tried, but the S4(Supply officer) shot it down. Some times you get lucky, sometime you don't. The JP-8 capable replacement stove was in the works, but so was the draw down of the early 1990s after the Wall came down. I didn't see another military issued stove for quite some time after that. I bought a Feather 400 and a Peak 1 550 and used them through my retirement from the Army. Great stoves that I still use today. It wasn't until I was retired that I found out that they were issuing commercial Coleman 550Bs and later, other models to some units, but was never able to acquire one as it wasn't authorized for us.

• 
  @ericbothur67188 ай бұрын

  I spent most of my 8 years in the Army on a M578 recovery vehicle. The M1950 was part of the BII . I also had a Coleman single burner that screwed on top of a small propane bottle. Good times

• 
  @lexwells476310 ай бұрын

  I took my to a mechanic and he used a dry wall screw and twisted into it and tried to pull it out that way. The plastic broke off at the screw. A little yellow was still visible, but further down the tube. He did the same thing and it broke off again. That time when it broke off it exposed some of that metal part of the dip stick. Unfortunately that means this method will no longer work because air gets by and no longer forms a tight seal to launch the tube out of there. So if this happens to you the best solutions would be to go directly to this or try the Nissan bulletin and use a shop vac. They should redesign these things. This shouldn't be allowed in cars anymore. Its stupid.

• 
  @Jakelol198010 ай бұрын

  Isnt that a 10” barrel?

• 
  @familymanof616911 ай бұрын

  Would be great to check for leaks!

• 
  @BigDawg7677311 ай бұрын

  What's the distance?

• 
  @scb0421 Жыл бұрын

  Not two triggers. One trigger and one sear.

• 
  @stevey7059 Жыл бұрын

  I bought one and tried to use it but it got stuck all the times and I need to climb up to loose it. So I ended up not using it. So why did it get stuck?

• 
  @gregcooper864711 ай бұрын

  I have not had luck doing it myself. If you have two people and you make the angle as WIDE as possible, it shouldnt get stuck nearly as often, and it works extremely well. This sucks because I never have anyone that can pull the saw with me.

• 
  @dalep2842 Жыл бұрын

  Thank you for this video! This is the exact problem with my late fathers 22. After removing the 2 pc grip I found the 2 broken plastic parts. I’d like to get the replacement part/parts to bring this back up to par. What is the part number and where is the best place to get this part? Thank you so much! Dale

• 
  @skswig1 Жыл бұрын

  try Numrich Arms or Bob's Gun Parts. You may have to make this part now. Dont throw away the broken bits.

• 
  @dalep2842 Жыл бұрын

  @@skswig1 I just got off the phone with Numrich Arms and they are out of stock. I will try Bob’s Gun Parts now. Thank you!

• 
  @jamesgeorge1709 Жыл бұрын

  I have a great way to get it where you want is with a device I built in 1990, It is a Wrist Rocket Sling Shot with a old Zebco 33 mounted beneath it and all you do is shoot a 1oz weight over the limb you want to cut thaen attach the fishing line to paracord and hoist it up and over. With some practise very accurate.😊

• 
  @jeffnagle426 Жыл бұрын

  Still have mine from a bar I owned. Got mine 1980 and have keys for it. We made $600.00 a month with people playing. Still a great game, played it last month with a person who never had seen one. Always looking for another one b

• 
  @trainroomgary Жыл бұрын

  Hi from Michigan - Does this motor have reverse? Well done video. 🚂

• 
  @skswig1 Жыл бұрын

  No reverse but I believe you can swing it all the around if you have clearance on the transom and go backward that. The prop will strike if you try that on this boat. I don't think I have ever seen a motor under 5 or so hp that has reverse. It is a good motor though. No troubles with it yet. All salt water use.

• 
  @trainroomgary Жыл бұрын

  @@skswig1 Thanks for the information. 👍

• 
  @AnnWard_SandcastleMomma Жыл бұрын

  OH MY GOD!

• 
  @sunbeam8866 Жыл бұрын

  Excellent information. I was worried for a second, until I realized all my H&Rs are from the pre-plastic era!

• 
  @robertlowery8410 Жыл бұрын

  I have a 929 same problem fell apart where can I get that piece at

• 
  @skswig1 Жыл бұрын

  try gun parts corp or ebay or make it out of jb weld or metal

• 
  @SarahPToadstool Жыл бұрын

  The two diamonds in the entire play area yields $20. The diamonds do not necessarily have to be in the same game but they must be on the same ticket.