Kioti = Kubota rip off. Please everyone do NOT buy these you WILL regret it!!! Thank me later
@Nadamamasboy19 күн бұрын
Very thorough video. Thank you for putting this together! Gravity drop cylinders could have a flow valve added to the hydraulic line, which would control decent in the situations you mentioned. Also, torsion axles would probably be fine for a single axle trailer since they wouldn't be dealing with any equalization issues.
@pennertrailersalesLLC7 күн бұрын
Correct on both counts. Good suggestions.
@vistascapes5553Ай бұрын
Thanks for this video. It was very informative.
@beerandbratАй бұрын
Which one would you recommend for a scrap metal guy? would you consider any thing else you did not mention for scrap pickup?
@pennertrailersalesLLC7 күн бұрын
Depends a little on what type of scrap you are carrying. Household scrap can be pretty light and bulky like appliances and such. A high side dump might be nice for the volume, but keep the height in mind if you are throwing things over the side. Heavier scrap that will be loaded by a machine can tear things up, so you may want a heavy 7 guage floor and height may not be as important.
@J_T_1Ай бұрын
Great job explaining all the options and the pro's and con's of each in a concise manner.
@Agairanm2 ай бұрын
Nice product ❤
@user-xb6wg2nj1z3 ай бұрын
nice
@Mr198533 ай бұрын
Agreed to all except the powder coat isn't good on a trailer! You want wet paint finish that covers everything not ending up with pin hole rust.
@pennertrailersalesLLC7 күн бұрын
I am not familiar with pin hole issues on power coat. The only thing I could think of that would create that would be if it hasn't been heated properly. Properly heated powder coat will completely liquefy and even sag or run if applied too thickly. When properly heated, there will be no pin holes.
@whitecapmadness71813 ай бұрын
I have to admit, you taught me a few things here. If you wee in my time zone, I’d absolutely buy from you.
@johnrosier16865 ай бұрын
This video was very helpful.
@jonmueller21176 ай бұрын
Very informative, and you are a skilled talker. Very professional.
@darwindropmazda7 ай бұрын
Really good informative video
@Flokiboys7 ай бұрын
hi I’m looking in to getting in the junk removal business. I was thinking about the f250 or 350 with a trailer. If that falls in the cdl category which I have a license already does that mean u have to get dot also. Also what’s better diesel or gas?
@pennertrailersalesLLC6 ай бұрын
Sorry for the delayed response, but if you are hauling something that pertains to conducting a business, most times you do need a DOT number. They are easy to obtain online. In regards to diesel vs. gas, I am a big proponent for using a gas burner as a stepping stone towards a diesel. Gas burners offer lower cost of entry and lower operating cost and will get the job done. Then when you are ready for it, make the switch to diesel if you prefer.
@2004jessiehs7 ай бұрын
Real good video, probably the best one ive seen in regards to dump trailers. He breaks it down and gives suggestions i had never considered. 👍🏼👍🏼 especially when dealing with a scissor lift, that it matters for different reasons which was its facing
@mattd86686 ай бұрын
I concur
@MAXCODumpsters8 ай бұрын
I wasn't expect a trailer dealer to put out such a non biased take on the roll off trailers. It's appreciated. Keep up the good work.
@joseflacko11988 ай бұрын
Mid
@alexandre489 Жыл бұрын
Promo-SM 😂
@johnoo98 Жыл бұрын
lol
@diamondctrailers Жыл бұрын
Lookin sharp! 🔥
@NoNotMe0000 Жыл бұрын
Smugglers everywhere are watching and taking notes!😅
@cheeseswears Жыл бұрын
Wouldn’t like to be there during a fender bender
@Cerberus984 Жыл бұрын
You're surrounded by a triangulated I-beam with an immense amount of protection.
@nick_moto_5500 Жыл бұрын
Beautiful truck and trailer 😍😍😍
@ashleywynn4923 Жыл бұрын
$150k truck $40k trailer 😂😂😂
@laurenhasty8525 Жыл бұрын
If you ain’t got it, just say it. 😂😂
@misterpatron13 ай бұрын
Awesome set up. What does the insurance look like on the trailer. ???
Пікірлер
Kioti = Kubota rip off. Please everyone do NOT buy these you WILL regret it!!! Thank me later
Very thorough video. Thank you for putting this together! Gravity drop cylinders could have a flow valve added to the hydraulic line, which would control decent in the situations you mentioned. Also, torsion axles would probably be fine for a single axle trailer since they wouldn't be dealing with any equalization issues.
Correct on both counts. Good suggestions.
Thanks for this video. It was very informative.
Which one would you recommend for a scrap metal guy? would you consider any thing else you did not mention for scrap pickup?
Depends a little on what type of scrap you are carrying. Household scrap can be pretty light and bulky like appliances and such. A high side dump might be nice for the volume, but keep the height in mind if you are throwing things over the side. Heavier scrap that will be loaded by a machine can tear things up, so you may want a heavy 7 guage floor and height may not be as important.
Great job explaining all the options and the pro's and con's of each in a concise manner.
Nice product ❤
nice
Agreed to all except the powder coat isn't good on a trailer! You want wet paint finish that covers everything not ending up with pin hole rust.
I am not familiar with pin hole issues on power coat. The only thing I could think of that would create that would be if it hasn't been heated properly. Properly heated powder coat will completely liquefy and even sag or run if applied too thickly. When properly heated, there will be no pin holes.
I have to admit, you taught me a few things here. If you wee in my time zone, I’d absolutely buy from you.
This video was very helpful.
Very informative, and you are a skilled talker. Very professional.
Really good informative video
hi I’m looking in to getting in the junk removal business. I was thinking about the f250 or 350 with a trailer. If that falls in the cdl category which I have a license already does that mean u have to get dot also. Also what’s better diesel or gas?
Sorry for the delayed response, but if you are hauling something that pertains to conducting a business, most times you do need a DOT number. They are easy to obtain online. In regards to diesel vs. gas, I am a big proponent for using a gas burner as a stepping stone towards a diesel. Gas burners offer lower cost of entry and lower operating cost and will get the job done. Then when you are ready for it, make the switch to diesel if you prefer.
Real good video, probably the best one ive seen in regards to dump trailers. He breaks it down and gives suggestions i had never considered. 👍🏼👍🏼 especially when dealing with a scissor lift, that it matters for different reasons which was its facing
I concur
I wasn't expect a trailer dealer to put out such a non biased take on the roll off trailers. It's appreciated. Keep up the good work.
Mid
Promo-SM 😂
lol
Lookin sharp! 🔥
Smugglers everywhere are watching and taking notes!😅
Wouldn’t like to be there during a fender bender
You're surrounded by a triangulated I-beam with an immense amount of protection.
Beautiful truck and trailer 😍😍😍
$150k truck $40k trailer 😂😂😂
If you ain’t got it, just say it. 😂😂
Awesome set up. What does the insurance look like on the trailer. ???
Awesome job James!