Пікірлер

• 
  @Cbchris211315 сағат бұрын

  Please use the override button when in reverse it’ll stop it sounding like that

• 
  @MrJrboss112 күн бұрын

  You worried about reliability at all compared to the grizzly ?

• 
  @chadbellenie21 күн бұрын

  What size are the intimidator tires you’re running? Thanks

• 
  @chadbellenie21 күн бұрын

  What size are the intimidator tires you’re running? Thanks

• 
  @rockcralwerАй бұрын

  Yea fuel injector wont do anything. Glad they made it so it won't start when try that.

• 
  @jd4665Ай бұрын

  I've got an Outlander 850 xmr 2024. Picked it up 2 months ago. No complaints so far.

• 
  @hyperstguyАй бұрын

  Thank you for this saved me!!! Been trying to diagnose my b7 passat for days. Intermittant key not in range with multiple keys

• 
  @G-Boyz.OutsideАй бұрын

  I have 1300 km on my 2023 XMR I love this machine I've sunk it wheelie it I beat the crap out of it I'd say it's a great machine best bang for the buck right now

• 
  @JacobOverman2 ай бұрын

  I’d say there’s a few main reasons I chose Grizzly over this machine. For one I don’t mud ride I trail ride. I like the can am. Don’t get me wrong. The combined braking is a down side. One rear caliper, over all prefer the way the grizzly rides, “reliability” that is proven. Headlight pod. But honestly if this can am g3 proves to be reliable. At a Lower price than the grizzly it will be hard to beat. Also don’t like all the u-joints on the can am and prefer the grizzly handlebar controls

• 
  @fromontario69542 ай бұрын

  I just got past the break in period with my new HD7 Pro hunting Edition and I love it! I was comparing it to the grizz when shopping around. You just get so much more with can am at a lower cost with these new models. No regrets at all.

• 
  @albertolobo66082 ай бұрын

  Hello friend, how long ago did you buy the ATV and how many hours have you used it?

• 
  @6gatornation2 ай бұрын

  after you go through water check your fluids for water Some are reporting front diff sub trans getting water in them first time in the water

• 
  @BackyardATV2 ай бұрын

  I was comparing the Grizzly with the XMR when I was looking. Besides reliability, which hasn't been proven yet on the gen3 frame, the XMR beats it in every aspect.

• 
  @mudpuppy3182 ай бұрын

  Reliability? Nothing wrong with the Grizzly over all but the dipstick and air filter issues are unacceptable. Those are major flaws that should be corrected.

• 
  @BackyardATV2 ай бұрын

  @@mudpuppy318 yeah, when I was ready to get a new machine everyone told me you can't go wrong with the Grizzly and their reliability, 10 year belt warranty yada yada... but as I said, the xmr was my choice, as it seems to knock it out the park compared to the grizzly as a all round machine. Luckily I haven't had the sway bar and engine mount issues yet....

• 
  @northerntoyota75842 ай бұрын

  As they get older you’ll wish you had the grizzly. Grease the sealing surface of the air filter, problem solved. Thousands of miles and I’ve never even thought about my dipstick popping out. It’s in there pretty solid. If you get a new machine every 5 years then yes I’m sure any atv will treat you well.

• 
  @SketchyXC2 ай бұрын

  Thats the kind onfo that helps. Thanks, safe travels 🤘

• 
  @keithbelz29523 ай бұрын

  The mayhem is a mud tire , its not made to ride smoothly,it doesn't like sand or hill climbs,it digs deep and throws mud clauds just like it was designed to do,,,put dot street tires on and try to ride mud you wont have anything good to say about them either,but they will preform great on pavement

• 
  @paulcoverdale83123 ай бұрын

  It’s like the rest of us😂😂😂😂 Who wants to wake up in minus 20. 🇬🇧🇬🇧🇬🇧🥃🥃🥃

• 
  @kaosfiles0073 ай бұрын

  CN you tell me how to take cover off without removing wheel?

• 
  @canamxmr47603 ай бұрын

  Close to ny?

• 
  @alexb16384 ай бұрын

  I hate that the shifter is on the right side. Not sure why they would do that

• 
  @Robert-uh6bx4 ай бұрын

  I got a 2011 rhino and it will start In -20 here in Alberta no problem. Even -30. It’s been outside since new and I use it almost daily. Had no problems with my grizzly either. Got a 2024 rubicon too now but I got a feeling it won’t start as good.

• 
  @tomg62844 ай бұрын

  I have made up my mind, Getting the hd7 pro. Went and sat on it. Very good and ergo is good too.

• 
  @fromontario69544 ай бұрын

  I got one this year. So far so good, just waiting to get out of the break in period so I can really test her out.

• 
  @audioman814 ай бұрын

  Lol. I wish my abs sensor came out that easy. I been pring on it for 20 minutes. It spins back and forth but wont come out even pring under it. cant beleive i havent broke it yet but gonna try again after seeing how easit yours came out im like wtf.

• 
  @2CANSAM19704 ай бұрын

  you know the bike has a computer and fuel injection so hitting the throttle does nothing since throttle by wire not like old school bikes computer controlled.

• 
  @larrypfalzer85014 ай бұрын

  You know that's not a bike right? Why do people call ATVs bikes...lol

• 
  @2CANSAM19704 ай бұрын

  @@larrypfalzer8501 because I’m old and that’s what we call them bike , Utv, atv , trikes, etc not cars not anything else.

• 
  @mudpuppy3182 ай бұрын

  The Grizzly would definitely start better cold you held the throttle open, it was fuel injected as well, so yes and no. Depends on the machine.

• 
  @Icutmetal10 күн бұрын

  @@mudpuppy318Sure.

• 
  @G-Boyz.Outside4 ай бұрын

  You definitely gonna be happy with this machine I've had mine since June 1st and I have 1275km on it The day I picked up my machine I brought it to work and put on a scale for skids and it wade in at 933lbs. For a single piston it has all kinds of power I do wheelies on it no problem.

• 
  @paulpryor8504 ай бұрын

  At the very least, you should buy a cover for the machine. If it's gonna sit outside!

• 
  @Icutmetal10 күн бұрын

  Or else what?

• 
  @AndrewsOutdoorAdventures4 ай бұрын

  Great videos!!

• 
  @Firebird4004 ай бұрын

  The can am’s are definitely nice machines. I had a 650 for a while and it was decent. One thing I didn’t like was it didn’t have a lever for the rear brakes on the handle bars. Have a king quad 750 now and it ok pretty similar to a grizzly.

• 
  @mudpuppy3184 ай бұрын

  My last comment on the tires 8x10’s sounds confusing, 8” wide rims, 10” wide tires. Hope that helps!

• 
  @angelrosalesresendis2374 ай бұрын

  Is that the linq modular cargo box from can am?

• 
  @mudpuppy3184 ай бұрын

  Nope. Just a Stanley Tool set from Canadian Tire lol

• 
  @angelrosalesresendis2374 ай бұрын

  @@mudpuppy318why does it fit so well haha that’s so cool!

• 
  @Recon987894 ай бұрын

  How are you liking those tires for plowing? 🇨🇦

• 
  @mudpuppy3184 ай бұрын

  They plow really well! Been using them for a few years now and they are a great all around tire!

• 
  @isaipedeoza72744 ай бұрын

  Can you make a top speed video of this machine and cand you make a full review 🙏

• 
  @mudpuppy3184 ай бұрын

  Will do very soon!

• 
  @ericlessard50214 ай бұрын

  64

• 
  @GYPSY4004 ай бұрын

  It's governed at 116mph

• 
  @smiller31104 ай бұрын

  @@GYPSY400you mean km. None of these machines get even close to 100mph let alone 116

• 
  @limeallens61605 ай бұрын

  great video but the volume is really low

• 
  @limeallens61605 ай бұрын

  so its just four bolts other than all of the other attachments that are holding it in? im thinking about buying the whole assembly on ebay and sliding it in ready to go.

• 
  @cjr2826 ай бұрын

  Hey I think Im going to order the same plow for my 22 Kodiak 700. I was wondering how far can you raise the plow up and have you any issues with clearance? Im undecided between the Kfi and the Warn Provantage front mount. Thanks, love the video btw and thats some serious cold!

• 
  @Keith_the_travelling_mechanic8 ай бұрын

  Pretty similar to the sti outback

• 
  @SydStrong9 ай бұрын

  Where did you find that kit?

• 
  @csmith623710 ай бұрын

  2:30 air bags on a Tundra eh? That's pretty sweet

• 
  @ramseytrain Жыл бұрын

  🤣🤣🤣🤣🤣🤣🤣🤣

• 
  @tractordirt Жыл бұрын

  2014-2021 same process?

• 
  @yourselfdotcom Жыл бұрын

  Hahahahah. Ya torch it all to pieces. Thanks anyways. How not to video.

• 
  @Sonjaorleans Жыл бұрын

  Did you have to do a valve adjustment after brake in period

• 
  @BillOtinger Жыл бұрын

  you can now buy the Axle bearing whole thing for $380.00

• 
  @collegeboulevardanimalhosp4313 Жыл бұрын

  Where from? OEM part?

• 
  @isabel1994R Жыл бұрын

  I don’t have a shop I rented a hub wheel replacement tool but doesn’t seem to be the right one. Does anyone know what I can do to replace it with out a torch or a shop press

• 
  @joelmoodyiii5078 Жыл бұрын

  What kind and size tires does the BF have?

• 
  @rickymeadows5176 Жыл бұрын

  Must be a common problem w/Tundras, just had to have mine replaced, Sadly I didn't have time to do it myself, ran about $1100 at dealership. but they also changed hoses & clamps. I wouldn't go through all this without changing those out too. Great Vid Brother.

• 
  @bud9719 Жыл бұрын

  Any significant power loss?

• 
  @ellobo1326 Жыл бұрын

  I love the tread design. The soft rubber scares me a bit longevity wise. I’ve put 3,800 miles on my EFX Motoclaws in past 4-5 years and have 90% tread. Very tough rubber compound. And 10% of those miles were on pavement.

• 
  @mudpuppy318 Жыл бұрын

  No issues with wear so far. 1 year down and they still look like new

• 
  @davidphillips8409 Жыл бұрын

  Looks like I'm getting ready to try this also 08 same issue 230k miles

• 
  @Slatari Жыл бұрын

  What is the width on your rims?

• 
  @mudpuppy318 Жыл бұрын

  7.5 I think

• 
  @elfries1 Жыл бұрын

  12/13/22 dealer quotes this job at 1600.00 US and that’s why I’m here